/* * Initialize graphics context, color palette, local preferences. * Called both at program startup and by "reset session". */ void init_session() { /* Disable pipes and system commands during initialization */ successful_initialization = FALSE; /* Undefine any previously-used variables */ del_udv_by_name("",TRUE); /* Restore default colors before loading local preferences */ set_colorsequence(1); /* Reset program variables not handled by 'reset' */ overflow_handling = INT64_OVERFLOW_TO_FLOAT; /* Reset voxel data structures if supported */ init_voxelsupport(); /* Make sure all variables start in the same state 'reset' * would set them to. */ reset_command(); /* FIXME: this does c_token++ */ load_rcfile(0); /* System-wide gnuplotrc if configured */ load_rcfile(1); /* ./.gnuplot if configured */ /* After this point we allow pipes and system commands */ successful_initialization = TRUE; load_rcfile(2); /* ~/.gnuplot */ }
/* * Initialize graphics context, color palette, local preferences. * Called both at program startup and by "reset session". */ void init_session() { /* Disable pipes and system commands during initialization */ successful_initialization = FALSE; /* Undefine any previously-used variables */ del_udv_by_name("",TRUE); /* Restore default colors before loadin local preferences */ set_colorsequence(1); /* Make sure all variables start in the same state 'reset' * would set them to. */ reset_command(); /* FIXME: this does c_token++ */ load_rcfile(0); /* System-wide gnuplotrc if configured */ load_rcfile(1); /* ./.gnuplot if configured */ /* After this point we allow pipes and system commands */ successful_initialization = TRUE; load_rcfile(2); /* ~/.gnuplot */ }
int rpexpose_select(){ g.status=S_STARTUP; g.x.display = XOpenDisplay(getenv("DISPLAY")); load_rcdefaults(); load_rcfile(); load_input(); load_xwindow(); load_buffer(); atexit(clean_up); // And here is when the magic is supposed to happen... XMapWindow(g.x.display,g.x.window); g.status=S_RUNNING; XEvent e; for(;;){ XNextEvent(g.x.display, &e); switch(e.type){ case MapNotify: XGrabKeyboard(g.x.display,g.x.window,False,GrabModeSync,GrabModeAsync,CurrentTime); break; case KeyPress:{ KeySym keysym=XKeycodeToKeysym(g.x.display,e.xkey.keycode,0); if( keysym<256 && isdigit(keysym) ){ if( g.p.selected->children[keysym-'0'] ){ g.p.selected=g.p.selected->children[keysym-'0']; event_move(g.p.selected->window); } break; } KeyCode keycode=XKeysymToKeycode(g.x.display,keysym); parse_command(g.rc.keybindings[keycode]); break; } case Expose: event_redraw(e.xexpose.x,e.xexpose.y,e.xexpose.width,e.xexpose.height); event_move(g.gui.selected); } } return 0; }
int main(int argc, char **argv) #endif { int i; #ifdef LINUXVGA LINUX_setup(); /* setup VGA before dropping privilege DBT 4/5/99 */ drop_privilege(); #endif /* make sure that we really have revoked root access, this might happen if gnuplot is compiled without vga support but is installed suid by mistake */ #ifdef __linux__ setuid(getuid()); #endif #if defined(MSDOS) && !defined(_Windows) && !defined(__GNUC__) PC_setup(); #endif /* MSDOS !Windows */ /* HBB: Seems this isn't needed any more for DJGPP V2? */ /* HBB: disable all floating point exceptions, just keep running... */ #if defined(DJGPP) && (DJGPP!=2) _control87(MCW_EM, MCW_EM); #endif #if defined(OS2) int rc; #ifdef OS2_IPC char semInputReadyName[40]; sprintf( semInputReadyName, "\\SEM32\\GP%i_Input_Ready", getpid() ); rc = DosCreateEventSem(semInputReadyName,&semInputReady,0,0); if (rc != 0) fputs("DosCreateEventSem error\n",stderr); #endif rc = RexxRegisterSubcomExe("GNUPLOT", (PFN) RexxInterface, NULL); #endif /* malloc large blocks, otherwise problems with fragmented mem */ #ifdef MALLOCDEBUG malloc_debug(7); #endif /* get helpfile from home directory */ #ifdef __DJGPP__ { char *s; strcpy(HelpFile, argv[0]); for (s = HelpFile; *s; s++) if (*s == DIRSEP1) *s = DIRSEP2; /* '\\' to '/' */ strcpy(strrchr(HelpFile, DIRSEP2), "/gnuplot.gih"); } /* Add also some "paranoid" tests for '\\': AP */ #endif /* DJGPP */ #ifdef VMS unsigned int status[2] = { 1, 0 }; #endif #if defined(HAVE_LIBEDITLINE) rl_getc_function = getc_wrapper; #endif #if defined(HAVE_LIBREADLINE) || defined(HAVE_LIBEDITLINE) /* T.Walter 1999-06-24: 'rl_readline_name' must be this fix name. * It is used to parse a 'gnuplot' specific section in '~/.inputrc' * or gnuplot specific commands in '.editrc' (when using editline * instead of readline) */ rl_readline_name = "Gnuplot"; rl_terminal_name = getenv("TERM"); using_history(); #endif #if defined(HAVE_LIBREADLINE) && !defined(MISSING_RL_TILDE_EXPANSION) rl_complete_with_tilde_expansion = 1; #endif for (i = 1; i < argc; i++) { if (!argv[i]) continue; if (!strcmp(argv[i], "-V") || !strcmp(argv[i], "--version")) { printf("gnuplot %s patchlevel %s\n", gnuplot_version, gnuplot_patchlevel); return 0; } else if (!strcmp(argv[i], "-h") || !strcmp(argv[i], "--help")) { printf( "Usage: gnuplot [OPTION]... [FILE]\n" #ifdef X11 "for X11 options see 'help X11->command-line-options'\n" #endif " -V, --version\n" " -h, --help\n" " -p --persist\n" " -e \"command1; command2; ...\"\n" "gnuplot %s patchlevel %s\n" #ifdef DIST_CONTACT "Report bugs to "DIST_CONTACT"\n" " or %s\n", #else "Report bugs to %s\n", #endif gnuplot_version, gnuplot_patchlevel, bug_email); return 0; } else if (!strncmp(argv[i], "-persist", 2) || !strcmp(argv[i], "--persist")) { persist_cl = TRUE; } } #ifdef X11 /* the X11 terminal removes tokens that it recognizes from argv. */ { int n = X11_args(argc, argv); argv += n; argc -= n; } #endif setbuf(stderr, (char *) NULL); #ifdef HAVE_SETVBUF /* this was once setlinebuf(). Docs say this is * identical to setvbuf(,NULL,_IOLBF,0), but MS C * faults this (size out of range), so we try with * size of 1024 instead. [SAS/C does that, too. -lh] * Failing this, I propose we just make the call and * ignore the return : its probably not a big deal */ if (setvbuf(stdout, (char *) NULL, _IOLBF, (size_t) 1024) != 0) (void) fputs("Could not linebuffer stdout\n", stderr); #ifdef X11 /* This call used to be in x11.trm, with the following comment: * Multi-character inputs like escape sequences but also mouse-pasted * text got buffered and therefore didn't trigger the select() function * in X11_waitforinput(). Switching to unbuffered input solved this. * 23 Jan 2002 (joze) * But switching to unbuffered mode causes all characters in the input * buffer to be lost. So the only safe time to do it is on program entry. * The #ifdef X11 is probably unnecessary, but makes the change minimal. * Do any non-X platforms suffer from the same problem? * EAM - Jan 2004. */ setvbuf(stdin, (char *) NULL, _IONBF, 0); #endif #endif gpoutfile = stdout; /* Initialize pre-loaded user variables */ (void) Gcomplex(&udv_pi.udv_value, M_PI, 0.0); udv_NaN = add_udv_by_name("NaN"); (void) Gcomplex(&(udv_NaN->udv_value), not_a_number(), 0.0); udv_NaN->udv_undef = FALSE; init_memory(); interactive = FALSE; init_terminal(); /* can set term type if it likes */ push_terminal(0); /* remember the default terminal */ /* reset the terminal when exiting */ /* this is done through gp_atexit so that other terminal functions * can be registered to be executed before the terminal is reset. */ GP_ATEXIT(term_reset); # if defined(_Windows) && ! defined(WGP_CONSOLE) interactive = TRUE; # else interactive = isatty(fileno(stdin)); # endif if (argc > 1) interactive = noinputfiles = FALSE; else noinputfiles = TRUE; /* Need this before show_version is called for the first time */ #ifdef HAVE_SYS_UTSNAME_H { struct utsname uts; /* something is fundamentally wrong if this fails ... */ if (uname(&uts) > -1) { # ifdef _AIX strcpy(os_name, uts.sysname); sprintf(os_name, "%s.%s", uts.version, uts.release); # elif defined(SCO) strcpy(os_name, "SCO"); strcpy(os_rel, uts.release); # elif defined(DJGPP) if (!strncmp(uts.sysname, "??Un", 4)) /* don't print ??Unknow" */ strcpy(os_name, "Unknown"); else { strcpy(os_name, uts.sysname); strcpy(os_rel, uts.release); } # else strcpy(os_name, uts.sysname); strcpy(os_rel, uts.release); # ifdef OS2 if (!strchr(os_rel,'.')) /* write either "2.40" or "4.0", or empty -- don't print "OS/2 1" */ strcpy(os_rel, ""); # endif # endif } } #else /* ! HAVE_SYS_UTSNAME_H */ strcpy(os_name, OS); strcpy(os_rel, ""); #endif /* HAVE_SYS_UTSNAME_H */ if (interactive) show_version(stderr); else show_version(NULL); /* Only load GPVAL_COMPILE_OPTIONS */ #ifdef WGP_CONSOLE #ifdef CONSOLE_SWITCH_CP if (cp_changed && interactive) { fprintf(stderr, "\ngnuplot changed the codepage of this console from %i to %i to\n" \ "match the graph window. Some characters might only display correctly\n" \ "if you change the font to a non-raster type.\n", cp_input, GetConsoleCP()); } #else if ((GetConsoleCP() != GetACP()) && interactive) { fprintf(stderr, "\nWarning: The codepage of the graph window (%i) and that of the\n" \ "console (%i) differ. Use `set encoding` or `!chcp` if extended\n" \ "characters don't display correctly.\n", GetACP(), GetConsoleCP()); } #endif #endif update_gpval_variables(3); /* update GPVAL_ variables available to user */ #ifdef VMS /* initialise screen management routines for command recall */ if (status[1] = smg$create_virtual_keyboard(&vms_vkid) != SS$_NORMAL) done(status[1]); if (status[1] = smg$create_key_table(&vms_ktid) != SS$_NORMAL) done(status[1]); #endif /* VMS */ if (!SETJMP(command_line_env, 1)) { /* first time */ interrupt_setup(); /* should move this stuff another initialisation routine, * something like init_set() maybe */ get_user_env(); init_loadpath(); init_locale(); /* HBB: make sure all variables start in the same mode 'reset' * would set them to. Since the axis variables aren't in * initialized arrays any more, this is now necessary... */ reset_command(); init_color(); /* Initialization of color */ load_rcfile(); init_fit(); /* Initialization of fitting module */ if (interactive && term != 0) { /* not unknown */ #ifdef GNUPLOT_HISTORY FPRINTF((stderr, "Before read_history\n")); #if defined(HAVE_LIBREADLINE) || defined(HAVE_LIBEDITLINE) expanded_history_filename = tilde_expand(GNUPLOT_HISTORY_FILE); #else expanded_history_filename = gp_strdup(GNUPLOT_HISTORY_FILE); gp_expand_tilde(&expanded_history_filename); #endif FPRINTF((stderr, "expanded_history_filename = %s\n", expanded_history_filename)); read_history(expanded_history_filename); { /* BEGIN: Go local to get environment variable */ const char *temp_env = getenv ("GNUPLOT_HISTORY_SIZE"); if (temp_env) gnuplot_history_size = strtol (temp_env, (char **) NULL, 10); } /* END: Go local to get environment variable */ /* * It is safe to ignore the return values of 'atexit()' and * 'on_exit()'. In the worst case, there is no history of your * currrent session and you have to type all again in your next * session. * This is the default behaviour (traditional reasons), too. * In case you don't have one of these functions, or you don't * want to use them, 'write_history()' is called directly. */ GP_ATEXIT(wrapper_for_write_history); #endif /* GNUPLOT_HISTORY */ fprintf(stderr, "\nTerminal type set to '%s'\n", term->name); } /* if (interactive && term != 0) */ } else { /* come back here from int_error() */ if (interactive == FALSE) exit_status = EXIT_FAILURE; #ifdef HAVE_READLINE_RESET else { /* reset properly readline after a SIGINT+longjmp */ rl_reset_after_signal (); } #endif load_file_error(); /* if we were in load_file(), cleanup */ SET_CURSOR_ARROW; #ifdef VMS /* after catching interrupt */ /* VAX stuffs up stdout on SIGINT while writing to stdout, so reopen stdout. */ if (gpoutfile == stdout) { if ((stdout = freopen("SYS$OUTPUT", "w", stdout)) == NULL) { /* couldn't reopen it so try opening it instead */ if ((stdout = fopen("SYS$OUTPUT", "w")) == NULL) { /* don't use int_error here - causes infinite loop! */ fputs("Error opening SYS$OUTPUT as stdout\n", stderr); } } gpoutfile = stdout; } #endif /* VMS */ if (!interactive && !noinputfiles) { term_reset(); exit(EXIT_FAILURE); /* exit on non-interactive error */ } } if (argc > 1) { #ifdef _Windows TBOOLEAN noend = persist_cl; #endif /* load filenames given as arguments */ while (--argc > 0) { ++argv; c_token = 0; #ifdef _Windows if (stricmp(*argv, "-noend") == 0 || stricmp(*argv, "/noend") == 0 || stricmp(*argv, "-persist") == 0) noend = TRUE; else #endif if (!strncmp(*argv, "-persist", 2) || !strcmp(*argv, "--persist")) { FPRINTF((stderr,"'persist' command line option recognized\n")); } else if (strcmp(*argv, "-") == 0) { interactive = TRUE; while (!com_line()); interactive = FALSE; } else if (strcmp(*argv, "-e") == 0) { --argc; ++argv; if (argc <= 0) { fprintf(stderr, "syntax: gnuplot -e \"commands\"\n"); return 0; } do_string(*argv); } else { load_file(loadpath_fopen(*argv, "r"), gp_strdup(*argv), FALSE); } } #ifdef _Windows if (noend) { interactive = TRUE; while (!com_line()); } #endif } else { /* take commands from stdin */ while (!com_line()); } #if (defined(HAVE_LIBREADLINE) || defined(HAVE_LIBEDITLINE)) && defined(GNUPLOT_HISTORY) #if !defined(HAVE_ATEXIT) && !defined(HAVE_ON_EXIT) /* You should be here if you neither have 'atexit()' nor 'on_exit()' */ wrapper_for_write_history(); #endif /* !HAVE_ATEXIT && !HAVE_ON_EXIT */ #endif /* (HAVE_LIBREADLINE || HAVE_LIBEDITLINE) && GNUPLOT_HISTORY */ #ifdef OS2 RexxDeregisterSubcom("GNUPLOT", NULL); #endif /* HBB 20040223: Not all compilers like exit() to end main() */ /* exit(exit_status); */ return exit_status; }