void s3c_sdhci_set_platdata(void)
{
#if defined(CONFIG_S3C_DEV_HSMMC)
s3c_sdhci0_set_platdata(&hsmmc0_platdata);
#endif
#if defined(CONFIG_S3C_DEV_HSMMC1)
if(machine_is_aries()) {
hsmmc1_platdata.built_in = 1;
}
s3c_sdhci1_set_platdata(&hsmmc1_platdata);
#endif
#if defined(CONFIG_S3C_DEV_HSMMC2)
if (machine_is_herring()) {
hsmmc2_platdata.ext_cd = IRQ_EINT(28);
hsmmc2_platdata.cfg_ext_cd = universal_sdhci2_cfg_ext_cd;
hsmmc2_platdata.detect_ext_cd = universal_sdhci2_detect_ext_cd;
}
if (machine_is_aries()) {
hsmmc2_platdata.ext_cd = IRQ_EINT(28);
hsmmc2_platdata.cfg_ext_cd = universal_sdhci2_cfg_ext_cd;
hsmmc2_platdata.detect_ext_cd = universal_sdhci2_detect_ext_cd;
}
s3c_sdhci2_set_platdata(&hsmmc2_platdata);
#endif
#if defined(CONFIG_S3C_DEV_HSMMC3)
if (machine_is_herring())
hsmmc3_platdata.built_in = 1;
s3c_sdhci3_set_platdata(&hsmmc3_platdata);
if (machine_is_aries())
hsmmc3_platdata.built_in = 1;
s3c_sdhci3_set_platdata(&hsmmc3_platdata);
#endif
};
static int __init bt_lpm_init(void)
{
int ret;
if (!machine_is_aries() && !machine_is_atlas())
return 0;
ret = gpio_request(GPIO_BT_WAKE, "gpio_bt_wake");
if (ret) {
printk(KERN_ERR "Failed to request gpio_bt_wake control\n");
return 0;
}
gpio_direction_output(GPIO_BT_WAKE, GPIO_LEVEL_LOW);
hrtimer_init(&bt_lpm.bt_lpm_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
bt_lpm.bt_lpm_delay = ktime_set(1, 0); /* 1 sec */
bt_lpm.bt_lpm_timer.function = bt_enter_lpm;
return 0;
}
static int __init aries_init_vibrator(void)
{
int ret = 0;
#ifdef CONFIG_MACH_ARIES
if (!machine_is_aries())
return 0;
#endif
hrtimer_init(&vibdata.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
vibdata.timer.function = aries_vibrator_timer_func;
INIT_WORK(&vibdata.work, aries_vibrator_work);
ret = gpio_request(GPIO_VIBTONE_EN1, "vibrator-en");
if (ret < 0)
return ret;
s3c_gpio_cfgpin(GPIO_VIBTONE_PWM, GPD0_TOUT_1);
vibdata.pwm_dev = pwm_request(1, "vibrator-pwm");
if (IS_ERR(vibdata.pwm_dev)) {
ret = PTR_ERR(vibdata.pwm_dev);
goto err_pwm_req;
}
wake_lock_init(&vibdata.wklock, WAKE_LOCK_SUSPEND, "vibrator");
mutex_init(&vibdata.lock);
ret = timed_output_dev_register(&to_dev);
if (ret < 0)
goto err_to_dev_reg;
return 0;
err_to_dev_reg:
mutex_destroy(&vibdata.lock);
wake_lock_destroy(&vibdata.wklock);
pwm_free(vibdata.pwm_dev);
err_pwm_req:
gpio_free(GPIO_VIBTONE_EN1);
return ret;
}
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
unsigned int gpio;
switch (width) {
/* Channel 0 supports 4 and 8-bit bus width */
case 8:
/* Set all the necessary GPIO function and pull up/down */
for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s3c_gpio_set_drvstrength(gpio, DRVSTR);
}
case 0:
case 1:
case 4:
/* Set all the necessary GPIO function and pull up/down */
for (gpio = S5PV210_GPG0(0); gpio <= S5PV210_GPG0(6); gpio++) {
if (gpio != S5PV210_GPG0(2)) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_set_drvstrength(gpio, DRVSTR);
}
break;
default:
printk(KERN_ERR "Wrong SD/MMC bus width : %d\n", width);
}
if (machine_is_herring()) {
s3c_gpio_cfgpin(S5PV210_GPJ2(7), S3C_GPIO_OUTPUT);
s3c_gpio_setpull(S5PV210_GPJ2(7), S3C_GPIO_PULL_NONE);
gpio_set_value(S5PV210_GPJ2(7), 1);
}
if (machine_is_aries()) {
s3c_gpio_cfgpin(S5PV210_GPJ2(7), S3C_GPIO_OUTPUT);
s3c_gpio_setpull(S5PV210_GPJ2(7), S3C_GPIO_PULL_NONE);
gpio_set_value(S5PV210_GPJ2(7), 1);
}
}