Ejemplos de mipi_port_get_state en C++ (Cpp)

Ejemplo n.º 1

Archivo: input_system.c Proyecto: AOSP-Zenfone2/kernel_asus_moorefield_stock

void receiver_get_state(
	const rx_ID_t				ID,
	receiver_state_t			*state)
{
	mipi_port_ID_t	port_id;

assert(ID < N_RX_ID);
assert(state != NULL);

	for (port_id = (mipi_port_ID_t)0; port_id < N_MIPI_PORT_ID; port_id++) {
		mipi_port_get_state(ID, port_id,
			&(state->mipi_port_state[port_id]));
	}

return;
}

Ejemplo n.º 2

void receiver_get_state(
	const rx_ID_t				ID,
	receiver_state_t			*state)
{
	mipi_port_ID_t	port_id;
	unsigned int	ch_id;

assert(ID < N_RX_ID);
assert(state != NULL);

	if (state == NULL)
		return ;

	state->fs_to_ls_delay = (uint8_t)receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_FS_TO_LS_DELAY_REG_IDX);
	state->ls_to_data_delay = (uint8_t)receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_LS_TO_DATA_DELAY_REG_IDX);
	state->data_to_le_delay = (uint8_t)receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_DATA_TO_LE_DELAY_REG_IDX);
	state->le_to_fe_delay = (uint8_t)receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_LE_TO_FE_DELAY_REG_IDX);
	state->fe_to_fs_delay = (uint8_t)receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_FE_TO_FS_DELAY_REG_IDX);
	state->le_to_fs_delay = (uint8_t)receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_LE_TO_LS_DELAY_REG_IDX);
	state->is_two_ppc = (bool)receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_TWO_PIXEL_EN_REG_IDX);
	state->backend_rst = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BACKEND_RST_REG_IDX);
	state->raw18 = (uint16_t)receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_RAW18_REG_IDX);
	state->force_raw8 = (bool)receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_FORCE_RAW8_REG_IDX);
	state->raw16 = (uint16_t)receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_RAW16_REG_IDX);

	for (port_id = (mipi_port_ID_t)0; port_id < N_MIPI_PORT_ID; port_id++) {
		mipi_port_get_state(ID, port_id,
			&(state->mipi_port_state[port_id]));
	}
	for (ch_id = (unsigned int)0; ch_id < N_RX_CHANNEL_ID; ch_id++) {
		rx_channel_get_state(ID, ch_id,
			&(state->rx_channel_state[ch_id]));
	}

	state->be_gsp_acc_ovl = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_GSP_ACC_OVL_REG_IDX);
	state->be_srst = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_SRST_REG_IDX);
	state->be_is_two_ppc = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_TWO_PPC_REG_IDX);
	state->be_comp_format0 = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_COMP_FORMAT_REG0_IDX);
	state->be_comp_format1 = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_COMP_FORMAT_REG1_IDX);
	state->be_comp_format2 = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_COMP_FORMAT_REG2_IDX);
	state->be_comp_format3 = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_COMP_FORMAT_REG3_IDX);
	state->be_sel = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_SEL_REG_IDX);
	state->be_raw16_config = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_RAW16_CONFIG_REG_IDX);
	state->be_raw18_config = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_RAW18_CONFIG_REG_IDX);
	state->be_force_raw8 = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_FORCE_RAW8_REG_IDX);
	state->be_irq_status = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_IRQ_STATUS_REG_IDX);
	state->be_irq_clear = receiver_reg_load(ID,
		_HRT_CSS_RECEIVER_BE_IRQ_CLEAR_REG_IDX);

return;
}