Ejemplos de mipi_r61529_device_register en C++ (Cpp)

Ejemplo n.º 1

Archivo: mipi_r61529_cmd_hvga_pt.c Proyecto: CSRedRat/CM-LG-L5_Kernel

static int __init mipi_cmd_r61529_hvga_pt_init(void)
{
	int ret;

#ifdef CONFIG_FB_MSM_MIPI_PANEL_DETECT
	if (msm_fb_detect_client("mipi_cmd_r61529_hvga"))
		return 0;
#endif

	pinfo.xres = 320;
	pinfo.yres = 480;
	pinfo.type = MIPI_CMD_PANEL;
	pinfo.pdest = DISPLAY_1;
	pinfo.wait_cycle = 0;
	pinfo.bpp = 24;
	pinfo.lcdc.h_back_porch = 20;
	pinfo.lcdc.h_front_porch = 40;
	pinfo.lcdc.h_pulse_width = 4;
	pinfo.lcdc.v_back_porch = 8;
	pinfo.lcdc.v_front_porch = 8;
	pinfo.lcdc.v_pulse_width = 4;

	pinfo.lcdc.border_clr = 0;	/* blk */
	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
	pinfo.lcdc.hsync_skew = 0;
	pinfo.bl_max = 100;
	pinfo.bl_min = 1;
	pinfo.fb_num = 2;
	pinfo.clk_rate = 380000000;

#ifdef USE_HW_VSYNC
	pinfo.lcd.vsync_enable = TRUE;
	pinfo.lcd.hw_vsync_mode = TRUE;
#endif
	pinfo.lcd.refx100 = 6200; /* adjust refx100 to prevent tearing */

	pinfo.mipi.mode = DSI_CMD_MODE;
	pinfo.mipi.dst_format = DSI_CMD_DST_FORMAT_RGB888;
	pinfo.mipi.vc = 0;
	pinfo.mipi.rgb_swap = DSI_RGB_SWAP_RGB;
	pinfo.mipi.data_lane0 = TRUE;
	pinfo.mipi.data_lane1 = FALSE;
	pinfo.mipi.t_clk_post = 0x20;
	pinfo.mipi.t_clk_pre = 0x2F;
	pinfo.mipi.stream = 0; /* dma_p */
	pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
#ifdef USE_HW_VSYNC
	pinfo.mipi.te_sel = 1; /* TE from vsync gpio */
#else
	pinfo.mipi.te_sel = 0; /* TE from vsync gpio */
#endif
	pinfo.mipi.interleave_max = 1;
	pinfo.mipi.insert_dcs_cmd = TRUE;
	pinfo.mipi.wr_mem_continue = 0x3c;
	pinfo.mipi.wr_mem_start = 0x2c;
	pinfo.mipi.dsi_phy_db = &dsi_cmd_mode_phy_db;
	pinfo.mipi.tx_eot_append = 0x01;
	pinfo.mipi.rx_eot_ignore = 0;
	pinfo.mipi.dlane_swap = 0x01;

	ret = mipi_r61529_device_register(&pinfo, MIPI_DSI_PRIM,
						MIPI_DSI_PANEL_FWVGA_PT);
	if (ret)
		pr_err("%s: failed to register device!\n", __func__);

	return ret;
}

Ejemplo n.º 2

static int __init mipi_video_r61529_hvga_pt_init(void)
{
	int ret;

#ifdef CONFIG_FB_MSM_MIPI_PANEL_DETECT
	if (msm_fb_detect_client("mipi_video_r61529_hvga"))
		return 0;
#endif

	pinfo.xres = 320;
	pinfo.yres = 480;
	pinfo.type = MIPI_VIDEO_PANEL;
	pinfo.pdest = DISPLAY_1;
	pinfo.wait_cycle = 0;
	pinfo.bpp = 24;

	pinfo.lcdc.h_back_porch = 40;
	pinfo.lcdc.h_front_porch = 100;
	pinfo.lcdc.h_pulse_width = 1;
	pinfo.lcdc.v_back_porch = 6;
	pinfo.lcdc.v_front_porch = 6;
	pinfo.lcdc.v_pulse_width = 2;

	pinfo.clk_rate = 334080000;

	pinfo.lcdc.border_clr = 0;	/* blk */
	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
	pinfo.lcdc.hsync_skew = 0;
	pinfo.bl_max = 0x71;
#ifdef CONFIG_MACH_MSM8960_L0
	pinfo.bl_default = 0x25;
#endif
	pinfo.bl_min = 1;
	pinfo.fb_num = 2;

	pinfo.mipi.mode = DSI_VIDEO_MODE;
	pinfo.mipi.pulse_mode_hsa_he = TRUE;
	pinfo.mipi.hfp_power_stop = TRUE;
	pinfo.mipi.hbp_power_stop = TRUE;
	pinfo.mipi.hsa_power_stop = TRUE;
	pinfo.mipi.eof_bllp_power_stop = TRUE;
	pinfo.mipi.bllp_power_stop = TRUE;

	pinfo.mipi.traffic_mode = DSI_NON_BURST_SYNCH_EVENT; /*DSI_BURST_MODE*/
	pinfo.mipi.dst_format = DSI_VIDEO_DST_FORMAT_RGB888;
	pinfo.mipi.vc = 0;
	pinfo.mipi.rgb_swap = DSI_RGB_SWAP_RGB;
	pinfo.mipi.data_lane0 = TRUE;
	pinfo.mipi.data_lane1 = FALSE;

	pinfo.mipi.t_clk_post = 0x22;
	pinfo.mipi.t_clk_pre = 0x33;

	pinfo.mipi.stream = 0; /* dma_p */
	pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_NONE;
	pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.frame_rate = 60;
	pinfo.mipi.dsi_phy_db = &dsi_video_mode_phy_db;
	pinfo.mipi.dlane_swap = 0x00;
	pinfo.mipi.tx_eot_append = 0x01;

	ret = mipi_r61529_device_register(&pinfo, MIPI_DSI_PRIM,
						MIPI_DSI_PANEL_FWVGA_PT);
	if (ret)
		pr_err("%s: failed to register device!\n", __func__);

	return ret;
}