Ejemplos de mipi_renesas_device_register en C++ (Cpp)

Ejemplo n.º 1

Archivo: mipi_renesas_video_fwvga_pt.c Proyecto: Kra1o5/android_kernel_huawei_u8815-gb

static int __init mipi_video_renesas_fwvga_pt_init(void)
{
	int ret;

#ifdef CONFIG_FB_MSM_MIPI_PANEL_DETECT
	if (msm_fb_detect_client("mipi_video_renesas_fwvga"))
		return 0;
#endif

	pinfo.xres = 480;
	pinfo.yres = 864;
	pinfo.type = MIPI_VIDEO_PANEL;
	pinfo.pdest = DISPLAY_1;
	pinfo.wait_cycle = 0;
	pinfo.bpp = 24;
#ifdef CONFIG_FB_MSM_MDP303
	pinfo.lcdc.h_back_porch = 100;
	pinfo.lcdc.h_front_porch = 100;
	pinfo.lcdc.h_pulse_width = 8;
	pinfo.lcdc.v_back_porch = 20;
	pinfo.lcdc.v_front_porch = 20;
	pinfo.lcdc.v_pulse_width = 1;
	pinfo.clk_rate = 499000000;
#else

#if defined(RENESAS_FWVGA_TWO_LANE)
	pinfo.lcdc.h_back_porch = 400;
#else
	pinfo.lcdc.h_back_porch = 50;
#endif
	pinfo.lcdc.h_front_porch = 50;

#if defined(RENESAS_FWVGA_TWO_LANE)
	pinfo.lcdc.h_pulse_width = 5;
#else
	pinfo.lcdc.h_pulse_width = 20;
#endif

#if defined(RENESAS_FWVGA_TWO_LANE)
	pinfo.lcdc.v_back_porch = 75;
	pinfo.lcdc.v_front_porch = 5;
	pinfo.lcdc.v_pulse_width = 1;
#else
	pinfo.lcdc.v_back_porch = 10;
	pinfo.lcdc.v_front_porch = 10;
	pinfo.lcdc.v_pulse_width = 5;
#endif

#endif
	pinfo.lcdc.border_clr = 0;	/* blk */
	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
	pinfo.lcdc.hsync_skew = 0;
	pinfo.bl_max = 100;
	pinfo.bl_min = 1;
	pinfo.fb_num = 2;

	pinfo.mipi.mode = DSI_VIDEO_MODE;
	pinfo.mipi.pulse_mode_hsa_he = TRUE;
	pinfo.mipi.hfp_power_stop = TRUE;
	pinfo.mipi.hbp_power_stop = TRUE;
	pinfo.mipi.hsa_power_stop = TRUE;
	pinfo.mipi.eof_bllp_power_stop = TRUE;
	pinfo.mipi.bllp_power_stop = TRUE;
#ifdef CONFIG_FB_MSM_MDP303
	pinfo.mipi.traffic_mode = DSI_BURST_MODE;
	pinfo.mipi.dst_format =  DSI_VIDEO_DST_FORMAT_RGB888;
	pinfo.mipi.vc = 0;
	pinfo.mipi.rgb_swap = DSI_RGB_SWAP_RGB;
	pinfo.mipi.data_lane0 = TRUE;
	pinfo.mipi.data_lane1 = TRUE;
	pinfo.mipi.t_clk_post = 0x20;
	pinfo.mipi.t_clk_pre = 0x2F;
	pinfo.mipi.stream = 0; /* dma_p */
	pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_NONE;
	pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.frame_rate = 60;
	pinfo.mipi.dsi_phy_db = &dsi_video_mode_phy_db;
	pinfo.mipi.dlane_swap = 0x01;
	pinfo.mipi.tx_eot_append = 0x01;
#else
	pinfo.mipi.traffic_mode = DSI_NON_BURST_SYNCH_PULSE;
	pinfo.mipi.dst_format = DSI_VIDEO_DST_FORMAT_RGB888;
	pinfo.mipi.vc = 0;
	pinfo.mipi.rgb_swap = DSI_RGB_SWAP_BGR;
	pinfo.mipi.data_lane0 = TRUE;
#if defined(RENESAS_FWVGA_TWO_LANE)
	pinfo.mipi.data_lane1 = TRUE;
#else
	pinfo.mipi.data_lane1 = FALSE;
#endif
	pinfo.mipi.t_clk_post = 0x03;
	pinfo.mipi.t_clk_pre = 0x24;
	pinfo.mipi.stream = 0; /* dma_p */
	pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.frame_rate = 60;
	pinfo.mipi.dsi_phy_db = &dsi_video_mode_phy_db;
#endif

	ret = mipi_renesas_device_register(&pinfo, MIPI_DSI_PRIM,
						MIPI_DSI_PANEL_FWVGA_PT);
	if (ret)
		pr_err("%s: failed to register device!\n", __func__);

	return ret;
}

Ejemplo n.º 2

Archivo: mipi_renesas_cmd_fwvga_pt.c Proyecto: ColonelSaumon/android_kernel_nokia_msm8x25

static int __init mipi_cmd_renesas_fwvga_pt_init(void)
{
	int ret;

	if (msm_fb_detect_client("mipi_cmd_renesas_fwvga"))
		return 0;

	pinfo.xres = 480;
	pinfo.yres = 864;
	pinfo.type = MIPI_CMD_PANEL;
	pinfo.pdest = DISPLAY_1;
	pinfo.wait_cycle = 0;
	pinfo.bpp = 24;
#ifdef CONFIG_FB_MSM_MDP303
	pinfo.lcdc.h_back_porch = 100;
	pinfo.lcdc.h_front_porch = 100;
	pinfo.lcdc.h_pulse_width = 8;
	pinfo.lcdc.v_back_porch = 20;
	pinfo.lcdc.v_front_porch = 20;
	pinfo.lcdc.v_pulse_width = 1;
#else
	pinfo.lcdc.h_front_porch = 50;
#if defined(RENESAS_FWVGA_TWO_LANE)
	pinfo.lcdc.h_back_porch = 400;
	pinfo.lcdc.h_pulse_width = 5;
	pinfo.lcdc.v_back_porch = 75;
	pinfo.lcdc.v_front_porch = 5;
	pinfo.lcdc.v_pulse_width = 1;
#else
	pinfo.lcdc.h_back_porch = 50;
	pinfo.lcdc.h_pulse_width = 20;
	pinfo.lcdc.v_back_porch = 10;
	pinfo.lcdc.v_front_porch = 10;
	pinfo.lcdc.v_pulse_width = 5;
#endif

#endif /* CONFIG_FB_MSM_MDP303 */
	pinfo.lcdc.border_clr = 0;	/* blk */
	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
	pinfo.lcdc.hsync_skew = 0;
	pinfo.bl_max = 255;
	pinfo.bl_min = 1;
	pinfo.fb_num = 2;

#ifdef CONFIG_FB_MSM_MDP303
	pinfo.clk_rate = 499000000;
#else
	pinfo.clk_rate = 152000000;
#endif
	pinfo.lcd.refx100 = 6000; /* adjust refx100 to prevent tearing */

	pinfo.mipi.mode = DSI_CMD_MODE;
	pinfo.mipi.dst_format = DSI_CMD_DST_FORMAT_RGB888;
	pinfo.mipi.vc = 0;
	pinfo.mipi.rgb_swap = DSI_RGB_SWAP_RGB;
	pinfo.mipi.data_lane0 = TRUE;
#ifdef CONFIG_FB_MSM_MDP303
	pinfo.lcd.vsync_enable = TRUE;
	pinfo.lcd.hw_vsync_mode = TRUE;
	pinfo.mipi.data_lane1 = TRUE;
	pinfo.mipi.t_clk_post = 0x20;
	pinfo.mipi.t_clk_pre = 0x2F;
	pinfo.mipi.stream = 0; /* dma_p */
	pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.te_sel = 1; /* TE from vsync gpio */
	pinfo.mipi.interleave_max = 1;
	pinfo.mipi.insert_dcs_cmd = TRUE;
	pinfo.mipi.wr_mem_continue = 0x3c;
	pinfo.mipi.wr_mem_start = 0x2c;
	pinfo.mipi.dsi_phy_db = &dsi_cmd_mode_phy_db;
	pinfo.mipi.tx_eot_append = 0x01;
	pinfo.mipi.rx_eot_ignore = 0;
#else
#if defined(RENESAS_FWVGA_TWO_LANE)
	pinfo.mipi.data_lane1 = TRUE;
#else
	pinfo.mipi.data_lane1 = FALSE;
#endif
	pinfo.mipi.t_clk_post = 0x18;
	pinfo.mipi.t_clk_pre = 0x14;
	pinfo.mipi.stream = 0;	/* dma_p */
	pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.te_sel = 1; /* TE from vsycn gpio */
	pinfo.mipi.interleave_max = 1;
	pinfo.mipi.insert_dcs_cmd = TRUE;
	pinfo.mipi.wr_mem_continue = 0x3c;
	pinfo.mipi.wr_mem_start = 0x2c;
	pinfo.mipi.dsi_phy_db = &dsi_cmd_mode_phy_db;
#endif /* CONFIG_FB_MSM_MDP303 */

	ret = mipi_renesas_device_register(&pinfo, MIPI_DSI_PRIM,
						MIPI_DSI_PANEL_FWVGA_PT);
	if (ret)
		pr_err("%s: failed to register device!\n", __func__);

	return ret;
}

Ejemplo n.º 3

Archivo: mipi_renesas_video_fwvga_pt.c Proyecto: msva/android_kernel_asus_A80

static int __init mipi_video_renesas_a80_init(void)
{
	int ret;

	//if (msm_fb_detect_client("mipi_video_renesas_a80"))
	//	return 0;
	printk("[Display]:mipi_video_renesas_a80_init+++\n");

	pinfo.xres = 1080;
	pinfo.yres = 1920;
	pinfo.type = MIPI_VIDEO_PANEL;
	pinfo.pdest = DISPLAY_1;
	pinfo.wait_cycle = 0;
	pinfo.bpp = 24;
    pinfo.lcdc.h_back_porch = 52;
    pinfo.lcdc.h_front_porch = 160;
    pinfo.lcdc.h_pulse_width = 10;
    pinfo.lcdc.v_back_porch = 4; //4
    pinfo.lcdc.v_front_porch = 4;
    pinfo.lcdc.v_pulse_width = 2;
	pinfo.lcdc.border_clr = 0;	/* blk */
//AUS_BSP +++ Jason Chang "[A80][Display] chang the color of buffer underrun in user build"
#ifdef ASUS_SHIP_BUILD
	pinfo.lcdc.underflow_clr = 0x0;	/* black */
#else
	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
#endif
//ASUS_BSP --- Jason Chang "[A80][Display] chang the color of buffer underrun in user build"
	pinfo.lcdc.hsync_skew = 0;
	pinfo.bl_max = 255;
	pinfo.bl_min = 1;
	pinfo.fb_num = 2;
	pinfo.clk_rate = 905000000;//981560000;

	pinfo.mipi.mode = DSI_VIDEO_MODE;
	pinfo.mipi.pulse_mode_hsa_he = TRUE;
	pinfo.mipi.hfp_power_stop = FALSE;
	pinfo.mipi.hbp_power_stop = FALSE;
	pinfo.mipi.hsa_power_stop = FALSE;
	pinfo.mipi.eof_bllp_power_stop = TRUE;
	pinfo.mipi.bllp_power_stop = TRUE;


	pinfo.mipi.traffic_mode = DSI_NON_BURST_SYNCH_PULSE;
	pinfo.mipi.dst_format = DSI_VIDEO_DST_FORMAT_RGB888;
	pinfo.mipi.vc = 0;
	pinfo.mipi.rgb_swap = DSI_RGB_SWAP_BGR;
	pinfo.mipi.data_lane0 = TRUE;
	pinfo.mipi.data_lane1 = TRUE;
	pinfo.mipi.data_lane2 = TRUE;
	pinfo.mipi.data_lane3 = TRUE;
	pinfo.mipi.tx_eot_append = TRUE;
	pinfo.mipi.t_clk_post = 0x1A;//0x04;
	pinfo.mipi.t_clk_pre = 0x32;//0x1c;
	pinfo.mipi.stream = 0; /* dma_p */
	pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.frame_rate = 60;
	pinfo.mipi.dsi_phy_db = &dsi_video_mode_phy_db;
	pinfo.mipi.esc_byte_ratio = 7;

	ret = mipi_renesas_device_register(&pinfo, MIPI_DSI_PRIM,
						MIPI_DSI_PANEL_FWVGA_PT);
	if (ret)
		pr_err("%s: failed to register device!\n", __func__);

	return ret;
}

Ejemplo n.º 4

static int __init mipi_video_renesas_fwvga_pt_init(void)
{
	int ret;

	if (msm_fb_detect_client("mipi_video_renesas_fwvga"))
		return 0;

	pinfo.xres = 1080;
	pinfo.yres = 1920;
	pinfo.type = MIPI_VIDEO_PANEL;
	pinfo.pdest = DISPLAY_1;
	pinfo.wait_cycle = 0;
	pinfo.bpp = 24;
	pinfo.lcdc.h_back_porch = 58;
	pinfo.lcdc.h_front_porch = 100;
	pinfo.lcdc.h_pulse_width = 10;
        if (panel_type == PANEL_ID_DLX_SHARP_RENESAS ) {
		pinfo.lcdc.v_back_porch = 4;
		pinfo.lcdc.v_front_porch = 4;
		pinfo.lcdc.v_pulse_width = 2;

		pinfo.lcd.v_back_porch = 4;
		pinfo.lcd.v_front_porch = 4;
		pinfo.lcd.v_pulse_width = 2;
	} else {
                pinfo.lcdc.v_back_porch = 3;
                pinfo.lcdc.v_front_porch = 3;
                pinfo.lcdc.v_pulse_width = 2;

                pinfo.lcd.v_back_porch = 3;
                pinfo.lcd.v_front_porch = 3;
	        pinfo.lcd.v_pulse_width = 2;
	}
	pinfo.lcdc.border_clr = 0;	
	pinfo.lcdc.underflow_clr = 0xff;	
	pinfo.lcdc.hsync_skew = 0;
	pinfo.bl_max = 255;
	pinfo.bl_min = 1;
	pinfo.fb_num = 2;
	pinfo.clk_rate = 860000000;

	pinfo.mipi.mode = DSI_VIDEO_MODE;
	pinfo.mipi.pulse_mode_hsa_he = TRUE;
	pinfo.mipi.hfp_power_stop = FALSE;
	pinfo.mipi.hbp_power_stop = FALSE;
	pinfo.mipi.hsa_power_stop = TRUE;
	pinfo.mipi.eof_bllp_power_stop = TRUE;
	pinfo.mipi.bllp_power_stop = TRUE;
	pinfo.mipi.traffic_mode = DSI_NON_BURST_SYNCH_EVENT;
	pinfo.mipi.dst_format = DSI_VIDEO_DST_FORMAT_RGB888;
	pinfo.mipi.vc = 0;
	pinfo.mipi.rgb_swap = DSI_RGB_SWAP_RGB;
	pinfo.mipi.data_lane0 = TRUE;
	pinfo.mipi.data_lane1 = TRUE;
	pinfo.mipi.data_lane2 = TRUE;
	pinfo.mipi.data_lane3 = TRUE;

	pinfo.mipi.tx_eot_append = TRUE;
	pinfo.mipi.t_clk_post = 0x05;
	pinfo.mipi.t_clk_pre = 0x2D;
	pinfo.mipi.stream = 0; 
	pinfo.mipi.mdp_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.frame_rate = 60;
	pinfo.mipi.dsi_phy_db = &dsi_video_mode_phy_db;

	ret = mipi_renesas_device_register(&pinfo, MIPI_DSI_PRIM,
						MIPI_DSI_PANEL_FWVGA_PT);
	if (ret)
		pr_err("%s: failed to register device!\n", __func__);

	return ret;
}

Ejemplo n.º 5

Archivo: mipi_renesas_video_fhd.c Proyecto: loogeo/ef52-kernel

static int __init mipi_video_renesas_fhd_init(void)
{
	int ret;

#ifdef CONFIG_FB_MSM_MIPI_PANEL_DETECT
	if (msm_fb_detect_client("mipi_video_renesas_fhd"))
		return 0;
#endif

	pinfo.xres = 1080;// kkcho_temp 720;
	pinfo.yres = 1920;// kkcho_temp 1280;

	pinfo.type = MIPI_VIDEO_PANEL;
	pinfo.pdest = DISPLAY_1;
	pinfo.wait_cycle = 0;
	pinfo.bpp = 24;

  	pinfo.lcdc.h_back_porch = 50;
	pinfo.lcdc.h_front_porch = 100;
	pinfo.lcdc.h_pulse_width = 10;
	pinfo.lcdc.v_back_porch = 4;
	pinfo.lcdc.v_front_porch = 4;
    pinfo.lcdc.v_pulse_width = 2;
		
	pinfo.lcdc.border_clr = 0;	/* blk */
	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
	pinfo.lcdc.hsync_skew = 0;

	pinfo.bl_max = LCD_BL_MAX;

	pinfo.bl_min = 1;
	pinfo.fb_num = 2;

   	pinfo.clk_rate = 860000000;


	pinfo.mipi.mode = DSI_VIDEO_MODE;
	pinfo.mipi.pulse_mode_hsa_he = TRUE;
	pinfo.mipi.hfp_power_stop = TRUE;
	pinfo.mipi.hbp_power_stop = FALSE; // shkwak 20120608, TRUE make white blank ..
	pinfo.mipi.hsa_power_stop = TRUE;

	pinfo.mipi.eof_bllp_power_stop = FALSE;
	pinfo.mipi.bllp_power_stop = TRUE;

	pinfo.mipi.traffic_mode = DSI_NON_BURST_SYNCH_EVENT;
	pinfo.mipi.dst_format = DSI_VIDEO_DST_FORMAT_RGB888;
	pinfo.mipi.vc = 0;
	pinfo.mipi.rgb_swap = DSI_RGB_SWAP_RGB;
   	pinfo.mipi.data_lane0 = TRUE;
  	pinfo.mipi.data_lane1 = TRUE;
   	pinfo.mipi.data_lane2 = TRUE;
   	pinfo.mipi.data_lane3 = TRUE;


  	pinfo.mipi.t_clk_post = 0x20;// 2036 = 0x7f4 was tried but failed.. 
	pinfo.mipi.t_clk_pre = 0x36;
	pinfo.mipi.stream = 0; /* dma_p */
	pinfo.mipi.mdp_trigger = 0;
	pinfo.mipi.dma_trigger = DSI_CMD_TRIGGER_SW;
	pinfo.mipi.frame_rate = 60;

	pinfo.mipi.dsi_phy_db = &dsi_video_mode_phy_db;
	pinfo.mipi.tx_eot_append = TRUE;
	pinfo.mipi.esc_byte_ratio = 4;  // 20120621, kkcho, added after 1023-patch

	ret = mipi_renesas_device_register(&pinfo, MIPI_DSI_PRIM,
						MIPI_DSI_PANEL_FWVGA_PT);
	if (ret)
		pr_err("%s: failed to register device!\n", __func__);

	return ret;
}