static void
mips_init(void)
{
int i;
printf("entry: mips_init()\n");
bootverbose = 1;
realmem = btoc(32 << 20);
for (i = 0; i < 10; i++) {
phys_avail[i] = 0;
}
/* phys_avail regions are in bytes */
dump_avail[0] = phys_avail[0] = MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
dump_avail[1] = phys_avail[1] = ctob(realmem);
physmem = realmem;
init_param1();
init_param2(physmem);
mips_cpu_init();
pmap_bootstrap();
mips_proc0_init();
mutex_init();
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}
static void
mips_init(void)
{
int i;
for (i = 0; i < 10; i++) {
phys_avail[i] = 0;
}
/* phys_avail regions are in bytes */
phys_avail[0] = MIPS_KSEG0_TO_PHYS((vm_offset_t)&end);
phys_avail[1] = ctob(realmem);
physmem = realmem;
init_param1();
init_param2(physmem);
mips_cpu_init();
pmap_bootstrap();
mips_proc0_init();
mutex_init();
#ifdef DDB
kdb_init();
#endif
}
static void
mips_init(void)
{
int i;
#ifdef FDT
struct mem_region mr[FDT_MEM_REGIONS];
uint64_t val;
int mr_cnt;
int j;
#endif
for (i = 0; i < 10; i++) {
phys_avail[i] = 0;
}
/* phys_avail regions are in bytes */
phys_avail[0] = MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
phys_avail[1] = ctob(realmem);
dump_avail[0] = phys_avail[0];
dump_avail[1] = phys_avail[1];
physmem = realmem;
#ifdef FDT
if (fdt_get_mem_regions(mr, &mr_cnt, &val) == 0) {
physmem = btoc(val);
KASSERT((phys_avail[0] >= mr[0].mr_start) && \
(phys_avail[0] < (mr[0].mr_start + mr[0].mr_size)),
("First region is not within FDT memory range"));
/* Limit size of the first region */
phys_avail[1] = (mr[0].mr_start + MIN(mr[0].mr_size, ctob(realmem)));
dump_avail[1] = phys_avail[1];
/* Add the rest of regions */
for (i = 1, j = 2; i < mr_cnt; i++, j+=2) {
phys_avail[j] = mr[i].mr_start;
phys_avail[j+1] = (mr[i].mr_start + mr[i].mr_size);
dump_avail[j] = phys_avail[j];
dump_avail[j+1] = phys_avail[j+1];
}
}
#endif
init_param1();
init_param2(physmem);
mips_cpu_init();
pmap_bootstrap();
mips_proc0_init();
mutex_init();
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}
static void
mips_init(void)
{
struct mem_region mr[FDT_MEM_REGIONS];
uint64_t val;
int i, j, mr_cnt;
char *memsize;
printf("entry: mips_init()\n");
bootverbose = 1;
for (i = 0; i < 10; i++)
phys_avail[i] = 0;
dump_avail[0] = phys_avail[0] = MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
/*
* The most low memory MT7621 can have. Currently MT7621 is the chip
* that supports the most memory, so that seems reasonable.
*/
realmem = btoc(448 * 1024 * 1024);
if (fdt_get_mem_regions(mr, &mr_cnt, &val) == 0) {
physmem = btoc(val);
printf("RAM size: %ldMB (from FDT)\n",
ctob(physmem) / (1024 * 1024));
KASSERT((phys_avail[0] >= mr[0].mr_start) && \
(phys_avail[0] < (mr[0].mr_start + mr[0].mr_size)),
("First region is not within FDT memory range"));
/* Limit size of the first region */
phys_avail[1] = (mr[0].mr_start +
MIN(mr[0].mr_size, ctob(realmem)));
dump_avail[1] = phys_avail[1];
/* Add the rest of the regions */
for (i = 1, j = 2; i < mr_cnt; i++, j+=2) {
phys_avail[j] = mr[i].mr_start;
phys_avail[j+1] = (mr[i].mr_start + mr[i].mr_size);
dump_avail[j] = phys_avail[j];
dump_avail[j+1] = phys_avail[j+1];
}
} else {
if ((memsize = kern_getenv("memsize")) != NULL) {
physmem = btoc(strtol(memsize, NULL, 0) << 20);
printf("RAM size: %ldMB (from memsize)\n",
ctob(physmem) / (1024 * 1024));
} else { /* All else failed, assume 32MB */
physmem = btoc(32 * 1024 * 1024);
printf("RAM size: %ldMB (assumed)\n",
ctob(physmem) / (1024 * 1024));
}
if (ctob(physmem) < (448 * 1024 * 1024)) {
/*
* Anything up to 448MB is assumed to be directly
* mappable as low memory...
*/
dump_avail[1] = phys_avail[1] = ctob(physmem);
} else if (mtk_soc_get_socid() == MTK_SOC_MT7621) {
/*
* On MT7621 the low memory is limited to 448MB, the
* rest is high memory, mapped at 0x20000000
*/
phys_avail[1] = 448 * 1024 * 1024;
phys_avail[2] = 0x20000000;
phys_avail[3] = phys_avail[2] + ctob(physmem) -
phys_avail[1];
dump_avail[1] = phys_avail[1] - phys_avail[0];
dump_avail[2] = phys_avail[2];
dump_avail[3] = phys_avail[3] - phys_avail[2];
} else {
/*
* We have > 448MB RAM and we're not MT7621? Currently
* there is no such chip, so we'll just limit the RAM to
* 32MB and let the user know...
*/
printf("Unknown chip, assuming 32MB RAM\n");
physmem = btoc(32 * 1024 * 1024);
dump_avail[1] = phys_avail[1] = ctob(physmem);
}
}
if (physmem < realmem)
realmem = physmem;
init_param1();
init_param2(physmem);
mips_cpu_init();
pmap_bootstrap();
mips_proc0_init();
mutex_init();
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}
static void
mips_init(void)
{
int i, j, cfe_mem_idx, tmp;
uint64_t maxmem;
#ifdef CFE_ENV
cfe_env_init();
#endif
TUNABLE_INT_FETCH("boothowto", &boothowto);
if (boothowto & RB_VERBOSE)
bootverbose++;
#ifdef MAXMEM
tmp = MAXMEM;
#else
tmp = 0;
#endif
TUNABLE_INT_FETCH("hw.physmem", &tmp);
maxmem = (uint64_t)tmp * 1024;
/*
* XXX
* If we used vm_paddr_t consistently in pmap, etc., we could
* use 64-bit page numbers on !n64 systems, too, like i386
* does with PAE.
*/
#if !defined(__mips_n64)
if (maxmem == 0 || maxmem > 0xffffffff)
maxmem = 0xffffffff;
#endif
#ifdef CFE
/*
* Query DRAM memory map from CFE.
*/
physmem = 0;
cfe_mem_idx = 0;
for (i = 0; i < 10; i += 2) {
int result;
uint64_t addr, len, type;
result = cfe_enummem(cfe_mem_idx++, 0, &addr, &len, &type);
if (result < 0) {
phys_avail[i] = phys_avail[i + 1] = 0;
break;
}
KASSERT(type == CFE_MI_AVAILABLE,
("CFE DRAM region is not available?"));
if (bootverbose)
printf("cfe_enummem: 0x%016jx/%ju.\n", addr, len);
if (maxmem != 0) {
if (addr >= maxmem) {
printf("Ignoring %ju bytes of memory at 0x%jx "
"that is above maxmem %dMB\n",
len, addr,
(int)(maxmem / (1024 * 1024)));
continue;
}
if (addr + len > maxmem) {
printf("Ignoring %ju bytes of memory "
"that is above maxmem %dMB\n",
(addr + len) - maxmem,
(int)(maxmem / (1024 * 1024)));
len = maxmem - addr;
}
}
phys_avail[i] = addr;
if (i == 0 && addr == 0) {
/*
* If this is the first physical memory segment probed
* from CFE, omit the region at the start of physical
* memory where the kernel has been loaded.
*/
phys_avail[i] += MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
}
phys_avail[i + 1] = addr + len;
physmem += len;
}
realmem = btoc(physmem);
#endif
for (j = 0; j < i; j++)
dump_avail[j] = phys_avail[j];
physmem = realmem;
init_param1();
init_param2(physmem);
mips_cpu_init();
/*
* Sibyte has a L1 data cache coherent with DMA. This includes
* on-chip network interfaces as well as PCI/HyperTransport bus
* masters.
*/
cpuinfo.cache_coherent_dma = TRUE;
/*
* XXX
* The kernel is running in 32-bit mode but the CFE is running in
* 64-bit mode. So the SR_KX bit in the status register is turned
* on by the CFE every time we call into it - for e.g. CFE_CONSOLE.
*
* This means that if get a TLB miss for any address above 0xc0000000
* and the SR_KX bit is set then we will end up in the XTLB exception
* vector.
*
* For now work around this by copying the TLB exception handling
* code to the XTLB exception vector.
*/
{
bcopy(MipsTLBMiss, (void *)MIPS3_XTLB_MISS_EXC_VEC,
MipsTLBMissEnd - MipsTLBMiss);
mips_icache_sync_all();
mips_dcache_wbinv_all();
}
pmap_bootstrap();
mips_proc0_init();
mutex_init();
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}
void
platform_start(__register_t a0 __unused, __register_t a1 __unused,
__register_t a2 __unused, __register_t a3 __unused)
{
uint64_t platform_counter_freq;
int argc = 0, i;
char **argv = NULL, **envp = NULL;
vm_offset_t kernend;
/*
* clear the BSS and SBSS segments, this should be first call in
* the function
*/
kernend = (vm_offset_t)&end;
memset(&edata, 0, kernend - (vm_offset_t)(&edata));
mips_postboot_fixup();
/* Initialize pcpu stuff */
mips_pcpu0_init();
/*
* Until some more sensible abstractions for uboot/redboot
* environment handling, we have to make this a compile-time
* hack. The existing code handles the uboot environment
* very incorrectly so we should just ignore initialising
* the relevant pointers.
*/
#ifndef AR71XX_ENV_UBOOT
argc = a0;
argv = (char**)a1;
envp = (char**)a2;
#endif
/*
* Protect ourselves from garbage in registers
*/
if (MIPS_IS_VALID_PTR(envp)) {
for (i = 0; envp[i]; i += 2) {
if (strcmp(envp[i], "memsize") == 0)
realmem = btoc(strtoul(envp[i+1], NULL, 16));
}
}
/*
* Just wild guess. RedBoot let us down and didn't reported
* memory size
*/
if (realmem == 0)
realmem = btoc(32*1024*1024);
/*
* Allow build-time override in case Redboot lies
* or in other situations (eg where there's u-boot)
* where there isn't (yet) a convienent method of
* being told how much RAM is available.
*
* This happens on at least the Ubiquiti LS-SR71A
* board, where redboot says there's 16mb of RAM
* but in fact there's 32mb.
*/
#if defined(AR71XX_REALMEM)
realmem = btoc(AR71XX_REALMEM);
#endif
/* phys_avail regions are in bytes */
phys_avail[0] = MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
phys_avail[1] = ctob(realmem);
dump_avail[0] = phys_avail[0];
dump_avail[1] = phys_avail[1] - phys_avail[0];
physmem = realmem;
/*
* ns8250 uart code uses DELAY so ticker should be inititalized
* before cninit. And tick_init_params refers to hz, so * init_param1
* should be called first.
*/
init_param1();
/* Detect the system type - this is needed for subsequent chipset-specific calls */
ar71xx_detect_sys_type();
ar71xx_detect_sys_frequency();
platform_counter_freq = ar71xx_cpu_freq();
mips_timer_init_params(platform_counter_freq, 1);
cninit();
init_static_kenv(boot1_env, sizeof(boot1_env));
printf("CPU platform: %s\n", ar71xx_get_system_type());
printf("CPU Frequency=%d MHz\n", u_ar71xx_cpu_freq / 1000000);
printf("CPU DDR Frequency=%d MHz\n", u_ar71xx_ddr_freq / 1000000);
printf("CPU AHB Frequency=%d MHz\n", u_ar71xx_ahb_freq / 1000000);
printf("platform frequency: %lld\n", platform_counter_freq);
printf("CPU reference clock: %d MHz\n", u_ar71xx_refclk / 1000000);
printf("arguments: \n");
printf(" a0 = %08x\n", a0);
printf(" a1 = %08x\n", a1);
printf(" a2 = %08x\n", a2);
printf(" a3 = %08x\n", a3);
/*
* XXX this code is very redboot specific.
*/
printf("Cmd line:");
if (MIPS_IS_VALID_PTR(argv)) {
for (i = 0; i < argc; i++) {
printf(" %s", argv[i]);
parse_argv(argv[i]);
}
}
else
printf ("argv is invalid");
printf("\n");
printf("Environment:\n");
if (MIPS_IS_VALID_PTR(envp)) {
for (i = 0; envp[i]; i+=2) {
printf(" %s = %s\n", envp[i], envp[i+1]);
setenv(envp[i], envp[i+1]);
}
}
else
printf ("envp is invalid\n");
/* Redboot if_arge MAC address is in the environment */
ar71xx_redboot_get_macaddr();
init_param2(physmem);
mips_cpu_init();
pmap_bootstrap();
mips_proc0_init();
mutex_init();
/*
* Reset USB devices
*/
ar71xx_init_usb_peripheral();
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}
void
platform_start(__register_t a0, __register_t a1,
__register_t a2 __unused, __register_t a3 __unused)
{
uint64_t platform_counter_freq;
vm_offset_t kernend;
int argc = a0;
char **argv = (char **)a1;
int i, mem;
/* clear the BSS and SBSS segments */
kernend = (vm_offset_t)&end;
memset(&edata, 0, kernend - (vm_offset_t)(&edata));
mips_postboot_fixup();
/* Initialize pcpu stuff */
mips_pcpu0_init();
/*
* Looking for mem=XXM argument
*/
mem = 0; /* Just something to start with */
for (i=0; i < argc; i++) {
if (strncmp(argv[i], "mem=", 4) == 0) {
mem = strtol(argv[i] + 4, NULL, 0);
break;
}
}
bootverbose = 1;
if (mem > 0)
realmem = btoc(mem << 20);
else
realmem = btoc(32 << 20);
for (i = 0; i < 10; i++) {
phys_avail[i] = 0;
}
/* phys_avail regions are in bytes */
phys_avail[0] = MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
phys_avail[1] = ctob(realmem);
dump_avail[0] = phys_avail[0];
dump_avail[1] = phys_avail[1];
physmem = realmem;
/*
* ns8250 uart code uses DELAY so ticker should be inititalized
* before cninit. And tick_init_params refers to hz, so * init_param1
* should be called first.
*/
init_param1();
/* TODO: parse argc,argv */
platform_counter_freq = 330000000UL;
mips_timer_init_params(platform_counter_freq, 1);
cninit();
/* Panic here, after cninit */
if (mem == 0)
panic("No mem=XX parameter in arguments");
printf("cmd line: ");
for (i=0; i < argc; i++)
printf("%s ", argv[i]);
printf("\n");
init_param2(physmem);
mips_cpu_init();
pmap_bootstrap();
mips_proc0_init();
mutex_init();
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}
void
platform_start(__register_t a0 __unused, __register_t a1 __unused,
__register_t a2 __unused, __register_t a3 __unused)
{
uint64_t platform_counter_freq;
uint32_t reg;
int argc, i, count = 0;
char **argv, **envp;
vm_offset_t kernend;
/*
* clear the BSS and SBSS segments, this should be first call in
* the function
*/
kernend = (vm_offset_t)&end;
memset(&edata, 0, kernend - (vm_offset_t)(&edata));
mips_postboot_fixup();
/* Initialize pcpu stuff */
mips_pcpu0_init();
argc = a0;
argv = (char**)a1;
envp = (char**)a2;
/*
* Protect ourselves from garbage in registers
*/
if (MIPS_IS_VALID_PTR(envp)) {
for (i = 0; envp[i]; i += 2)
{
if (strcmp(envp[i], "memsize") == 0)
realmem = btoc(strtoul(envp[i+1], NULL, 16));
else if (strcmp(envp[i], "ethaddr") == 0) {
count = sscanf(envp[i+1], "%x.%x.%x.%x.%x.%x",
&ar711_base_mac[0], &ar711_base_mac[1],
&ar711_base_mac[2], &ar711_base_mac[3],
&ar711_base_mac[4], &ar711_base_mac[5]);
if (count < 6)
memset(ar711_base_mac, 0,
sizeof(ar711_base_mac));
}
}
}
/*
* Just wild guess. RedBoot let us down and didn't reported
* memory size
*/
if (realmem == 0)
realmem = btoc(32*1024*1024);
/* phys_avail regions are in bytes */
phys_avail[0] = MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
phys_avail[1] = ctob(realmem);
physmem = realmem;
/*
* ns8250 uart code uses DELAY so ticker should be inititalized
* before cninit. And tick_init_params refers to hz, so * init_param1
* should be called first.
*/
init_param1();
platform_counter_freq = ar71xx_cpu_freq();
mips_timer_init_params(platform_counter_freq, 1);
cninit();
init_static_kenv(boot1_env, sizeof(boot1_env));
printf("platform frequency: %lld\n", platform_counter_freq);
printf("arguments: \n");
printf(" a0 = %08x\n", a0);
printf(" a1 = %08x\n", a1);
printf(" a2 = %08x\n", a2);
printf(" a3 = %08x\n", a3);
printf("Cmd line:");
if (MIPS_IS_VALID_PTR(argv)) {
for (i = 0; i < argc; i++) {
printf(" %s", argv[i]);
parse_argv(argv[i]);
}
}
else
printf ("argv is invalid");
printf("\n");
printf("Environment:\n");
if (MIPS_IS_VALID_PTR(envp)) {
for (i = 0; envp[i]; i+=2) {
printf(" %s = %s\n", envp[i], envp[i+1]);
setenv(envp[i], envp[i+1]);
}
}
else
printf ("envp is invalid\n");
init_param2(physmem);
mips_cpu_init();
pmap_bootstrap();
mips_proc0_init();
mutex_init();
/*
* Reset USB devices
*/
reg = ATH_READ_REG(AR71XX_RST_RESET);
reg |=
RST_RESET_USB_OHCI_DLL | RST_RESET_USB_HOST | RST_RESET_USB_PHY;
ATH_WRITE_REG(AR71XX_RST_RESET, reg);
DELAY(1000);
reg &=
~(RST_RESET_USB_OHCI_DLL | RST_RESET_USB_HOST | RST_RESET_USB_PHY);
ATH_WRITE_REG(AR71XX_RST_RESET, reg);
ATH_WRITE_REG(AR71XX_USB_CTRL_CONFIG,
USB_CTRL_CONFIG_OHCI_DES_SWAP | USB_CTRL_CONFIG_OHCI_BUF_SWAP |
USB_CTRL_CONFIG_EHCI_DES_SWAP | USB_CTRL_CONFIG_EHCI_BUF_SWAP);
ATH_WRITE_REG(AR71XX_USB_CTRL_FLADJ,
(32 << USB_CTRL_FLADJ_HOST_SHIFT) | (3 << USB_CTRL_FLADJ_A5_SHIFT));
DELAY(1000);
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}
void
platform_start(__register_t a0, __register_t a1, __register_t a2 __unused,
__register_t a3)
{
const struct octeon_feature_description *ofd;
uint64_t platform_counter_freq;
int rv;
mips_postboot_fixup();
/*
* Initialize boot parameters so that we can determine things like
* which console we shoud use, etc.
*/
octeon_boot_params_init(a3);
/* Initialize pcpu stuff */
mips_pcpu0_init();
mips_timer_early_init(cvmx_sysinfo_get()->cpu_clock_hz);
/* Initialize console. */
cninit();
/*
* Display information about the CPU.
*/
#if !defined(OCTEON_MODEL)
printf("Using runtime CPU model checks.\n");
#else
printf("Compiled for CPU model: " __XSTRING(OCTEON_MODEL) "\n");
#endif
strcpy(cpu_model, octeon_model_get_string(cvmx_get_proc_id()));
printf("CPU Model: %s\n", cpu_model);
printf("CPU clock: %uMHz Core Mask: %#x\n",
cvmx_sysinfo_get()->cpu_clock_hz / 1000000,
cvmx_sysinfo_get()->core_mask);
rv = octeon_model_version_check(cvmx_get_proc_id());
if (rv == -1)
panic("%s: kernel not compatible with this processor.", __func__);
/*
* Display information about the board.
*/
#if defined(OCTEON_BOARD_CAPK_0100ND)
strcpy(cpu_board, "CAPK-0100ND");
if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_CN3010_EVB_HS5) {
panic("Compiled for %s, but board type is %s.", cpu_board,
cvmx_board_type_to_string(cvmx_sysinfo_get()->board_type));
}
#else
strcpy(cpu_board,
cvmx_board_type_to_string(cvmx_sysinfo_get()->board_type));
#endif
printf("Board: %s\n", cpu_board);
printf("Board Type: %u Revision: %u/%u\n",
cvmx_sysinfo_get()->board_type,
cvmx_sysinfo_get()->board_rev_major,
cvmx_sysinfo_get()->board_rev_minor);
printf("Serial number: %s\n", cvmx_sysinfo_get()->board_serial_number);
/*
* Additional on-chip hardware/settings.
*
* XXX Display PCI host/target? What else?
*/
printf("MAC address base: %6D (%u configured)\n",
cvmx_sysinfo_get()->mac_addr_base, ":",
cvmx_sysinfo_get()->mac_addr_count);
octeon_ciu_reset();
/*
* Convert U-Boot 'bootoctlinux' loader command line arguments into
* boot flags and kernel environment variables.
*/
bootverbose = 1;
octeon_init_kenv(a3);
/*
* For some reason on the cn38xx simulator ebase register is set to
* 0x80001000 at bootup time. Move it back to the default, but
* when we move to having support for multiple executives, we need
* to rethink this.
*/
mips_wr_ebase(0x80000000);
octeon_memory_init();
init_param1();
init_param2(physmem);
mips_cpu_init();
pmap_bootstrap();
mips_proc0_init();
mutex_init();
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
cpu_clock = cvmx_sysinfo_get()->cpu_clock_hz;
platform_counter_freq = cpu_clock;
octeon_timecounter.tc_frequency = cpu_clock;
platform_timecounter = &octeon_timecounter;
mips_timer_init_params(platform_counter_freq, 0);
set_cputicker(octeon_get_ticks, cpu_clock, 0);
#ifdef SMP
/*
* Clear any pending IPIs.
*/
cvmx_write_csr(CVMX_CIU_MBOX_CLRX(0), 0xffffffff);
#endif
printf("Octeon SDK: %s\n", OCTEON_SDK_VERSION_STRING);
printf("Available Octeon features:");
for (ofd = octeon_feature_descriptions; ofd->ofd_string != NULL; ofd++)
if (octeon_has_feature(ofd->ofd_feature))
printf(" %s", ofd->ofd_string);
printf("\n");
}
static void
mips_init(void)
{
int i, j;
printf("entry: mips_init()\n");
#ifdef CFE
/*
* Query DRAM memory map from CFE.
*/
physmem = 0;
for (i = 0; i < 10; i += 2) {
int result;
uint64_t addr, len, type;
result = cfe_enummem(i / 2, 0, &addr, &len, &type);
if (result < 0) {
BCM_TRACE("There is no phys memory for: %d\n", i);
phys_avail[i] = phys_avail[i + 1] = 0;
break;
}
if (type != CFE_MI_AVAILABLE) {
BCM_TRACE("phys memory is not available: %d\n", i);
continue;
}
phys_avail[i] = addr;
if (i == 0 && addr == 0) {
/*
* If this is the first physical memory segment probed
* from CFE, omit the region at the start of physical
* memory where the kernel has been loaded.
*/
phys_avail[i] += MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
}
BCM_TRACE("phys memory is available for: %d\n", i);
BCM_TRACE(" => addr = %jx\n", addr);
BCM_TRACE(" => len = %jd\n", len);
phys_avail[i + 1] = addr + len;
physmem += len;
}
BCM_TRACE("Total phys memory is : %ld\n", physmem);
realmem = btoc(physmem);
#endif
for (j = 0; j < i; j++)
dump_avail[j] = phys_avail[j];
physmem = realmem;
init_param1();
init_param2(physmem);
mips_cpu_init();
pmap_bootstrap();
mips_proc0_init();
mutex_init();
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}