void MethodHandles::trace_method_handle(MacroAssembler* _masm, const char* adaptername) {
if (!TraceMethodHandles) return;
BLOCK_COMMENT("trace_method_handle {");
__ enter();
__ andptr(rsp, -16); // align stack if needed for FPU state
__ pusha();
__ mov(rbx, rsp); // for retreiving saved_regs
// Note: saved_regs must be in the entered frame for the
// robust stack walking implemented in trace_method_handle_stub.
// save FP result, valid at some call sites (adapter_opt_return_float, ...)
__ increment(rsp, -2 * wordSize);
if (UseSSE >= 2) {
__ movdbl(Address(rsp, 0), xmm0);
} else if (UseSSE == 1) {
__ movflt(Address(rsp, 0), xmm0);
} else {
__ fst_d(Address(rsp, 0));
}
// Incoming state:
// rcx: method handle
//
// To avoid calling convention issues, build a record on the stack
// and pass the pointer to that instead.
__ push(rbp); // entry_sp (with extra align space)
__ push(rbx); // pusha saved_regs
__ push(rcx); // mh
__ push(rcx); // slot for adaptername
__ movptr(Address(rsp, 0), (intptr_t) adaptername);
__ super_call_VM_leaf(CAST_FROM_FN_PTR(address, trace_method_handle_stub_wrapper), rsp);
__ increment(rsp, sizeof(MethodHandleStubArguments));
if (UseSSE >= 2) {
__ movdbl(xmm0, Address(rsp, 0));
} else if (UseSSE == 1) {
__ movflt(xmm0, Address(rsp, 0));
} else {
__ fld_d(Address(rsp, 0));
}
__ increment(rsp, 2 * wordSize);
__ popa();
__ leave();
BLOCK_COMMENT("} trace_method_handle");
}
void InterpreterRuntime::SignatureHandlerGenerator::pass_float() {
const Address src(from(), Interpreter::local_offset_in_bytes(offset()));
#ifdef _WIN64
if (_num_args < Argument::n_float_register_parameters_c-1) {
__ movflt(as_XMMRegister(++_num_args), src);
} else {
__ movl(rax, src);
__ movl(Address(to(), _stack_offset), rax);
_stack_offset += wordSize;
}
#else
if (_num_fp_args < Argument::n_float_register_parameters_c) {
__ movflt(as_XMMRegister(_num_fp_args++), src);
} else {
__ movl(rax, src);
__ movl(Address(to(), _stack_offset), rax);
_stack_offset += wordSize;
}
#endif
}
/**
* Method entry for static native method:
* java.lang.Float.intBitsToFloat(int bits)
*/
address InterpreterGenerator::generate_Float_intBitsToFloat_entry() {
if (UseSSE >= 1) {
address entry = __ pc();
// rsi: the sender's SP
// Skip safepoint check (compiler intrinsic versions of this method
// do not perform safepoint checks either).
// Load 'bits' into xmm0 (interpreter returns results in xmm0)
__ movflt(xmm0, Address(rsp, wordSize));
// Return
__ pop(rdi); // get return address
__ mov(rsp, rsi); // set rsp to the sender's SP
__ jmp(rdi);
return entry;
}
return NULL;
}
address TemplateInterpreterGenerator::generate_slow_signature_handler() {
address entry = __ pc();
// rbx: method
// r14: pointer to locals
// c_rarg3: first stack arg - wordSize
__ mov(c_rarg3, rsp);
// adjust rsp
__ subptr(rsp, 4 * wordSize);
__ call_VM(noreg,
CAST_FROM_FN_PTR(address,
InterpreterRuntime::slow_signature_handler),
rbx, r14, c_rarg3);
// rax: result handler
// Stack layout:
// rsp: 3 integer or float args (if static first is unused)
// 1 float/double identifiers
// return address
// stack args
// garbage
// expression stack bottom
// bcp (NULL)
// ...
// Do FP first so we can use c_rarg3 as temp
__ movl(c_rarg3, Address(rsp, 3 * wordSize)); // float/double identifiers
for ( int i= 0; i < Argument::n_int_register_parameters_c-1; i++ ) {
XMMRegister floatreg = as_XMMRegister(i+1);
Label isfloatordouble, isdouble, next;
__ testl(c_rarg3, 1 << (i*2)); // Float or Double?
__ jcc(Assembler::notZero, isfloatordouble);
// Do Int register here
switch ( i ) {
case 0:
__ movl(rscratch1, Address(rbx, Method::access_flags_offset()));
__ testl(rscratch1, JVM_ACC_STATIC);
__ cmovptr(Assembler::zero, c_rarg1, Address(rsp, 0));
break;
case 1:
__ movptr(c_rarg2, Address(rsp, wordSize));
break;
case 2:
__ movptr(c_rarg3, Address(rsp, 2 * wordSize));
break;
default:
break;
}
__ jmp (next);
__ bind(isfloatordouble);
__ testl(c_rarg3, 1 << ((i*2)+1)); // Double?
__ jcc(Assembler::notZero, isdouble);
// Do Float Here
__ movflt(floatreg, Address(rsp, i * wordSize));
__ jmp(next);
// Do Double here
__ bind(isdouble);
__ movdbl(floatreg, Address(rsp, i * wordSize));
__ bind(next);
}
// restore rsp
__ addptr(rsp, 4 * wordSize);
__ ret(0);
return entry;
}
address TemplateInterpreterGenerator::generate_math_entry(AbstractInterpreter::MethodKind kind) {
// rbx,: Method*
// rcx: scratrch
// r13: sender sp
if (!InlineIntrinsics) return NULL; // Generate a vanilla entry
address entry_point = __ pc();
// These don't need a safepoint check because they aren't virtually
// callable. We won't enter these intrinsics from compiled code.
// If in the future we added an intrinsic which was virtually callable
// we'd have to worry about how to safepoint so that this code is used.
// mathematical functions inlined by compiler
// (interpreter must provide identical implementation
// in order to avoid monotonicity bugs when switching
// from interpreter to compiler in the middle of some
// computation)
//
// stack: [ ret adr ] <-- rsp
// [ lo(arg) ]
// [ hi(arg) ]
//
if (kind == Interpreter::java_lang_math_fmaD) {
__ movdbl(xmm0, Address(rsp, wordSize));
__ movdbl(xmm1, Address(rsp, 3 * wordSize));
__ movdbl(xmm2, Address(rsp, 5 * wordSize));
__ fmad(xmm0, xmm1, xmm2, xmm0);
} else if (kind == Interpreter::java_lang_math_fmaF) {
__ movflt(xmm0, Address(rsp, wordSize));
__ movflt(xmm1, Address(rsp, 2 * wordSize));
__ movflt(xmm2, Address(rsp, 3 * wordSize));
__ fmaf(xmm0, xmm1, xmm2, xmm0);
} else if (kind == Interpreter::java_lang_math_sqrt) {
__ sqrtsd(xmm0, Address(rsp, wordSize));
} else if (kind == Interpreter::java_lang_math_exp) {
__ movdbl(xmm0, Address(rsp, wordSize));
if (StubRoutines::dexp() != NULL) {
__ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::dexp())));
} else {
__ call_VM_leaf0(CAST_FROM_FN_PTR(address, SharedRuntime::dexp));
}
} else if (kind == Interpreter::java_lang_math_log) {
__ movdbl(xmm0, Address(rsp, wordSize));
if (StubRoutines::dlog() != NULL) {
__ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::dlog())));
} else {
__ call_VM_leaf0(CAST_FROM_FN_PTR(address, SharedRuntime::dlog));
}
} else if (kind == Interpreter::java_lang_math_log10) {
__ movdbl(xmm0, Address(rsp, wordSize));
if (StubRoutines::dlog10() != NULL) {
__ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::dlog10())));
} else {
__ call_VM_leaf0(CAST_FROM_FN_PTR(address, SharedRuntime::dlog10));
}
} else if (kind == Interpreter::java_lang_math_sin) {
__ movdbl(xmm0, Address(rsp, wordSize));
if (StubRoutines::dsin() != NULL) {
__ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::dsin())));
} else {
__ call_VM_leaf0(CAST_FROM_FN_PTR(address, SharedRuntime::dsin));
}
} else if (kind == Interpreter::java_lang_math_cos) {
__ movdbl(xmm0, Address(rsp, wordSize));
if (StubRoutines::dcos() != NULL) {
__ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::dcos())));
} else {
__ call_VM_leaf0(CAST_FROM_FN_PTR(address, SharedRuntime::dcos));
}
} else if (kind == Interpreter::java_lang_math_pow) {
__ movdbl(xmm1, Address(rsp, wordSize));
__ movdbl(xmm0, Address(rsp, 3 * wordSize));
if (StubRoutines::dpow() != NULL) {
__ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::dpow())));
} else {
__ call_VM_leaf0(CAST_FROM_FN_PTR(address, SharedRuntime::dpow));
}
} else if (kind == Interpreter::java_lang_math_tan) {
__ movdbl(xmm0, Address(rsp, wordSize));
if (StubRoutines::dtan() != NULL) {
__ call(RuntimeAddress(CAST_FROM_FN_PTR(address, StubRoutines::dtan())));
} else {
__ call_VM_leaf0(CAST_FROM_FN_PTR(address, SharedRuntime::dtan));
}
} else {
__ fld_d(Address(rsp, wordSize));
switch (kind) {
case Interpreter::java_lang_math_abs:
__ fabs();
break;
default:
ShouldNotReachHere();
}
// return double result in xmm0 for interpreter and compilers.
__ subptr(rsp, 2*wordSize);
// Round to 64bit precision
__ fstp_d(Address(rsp, 0));
__ movdbl(xmm0, Address(rsp, 0));
__ addptr(rsp, 2*wordSize);
}
__ pop(rax);
__ mov(rsp, r13);
__ jmp(rax);
return entry_point;
}
address TemplateInterpreterGenerator::generate_slow_signature_handler() {
address entry = __ pc();
// rbx: method
// r14: pointer to locals
// c_rarg3: first stack arg - wordSize
__ mov(c_rarg3, rsp);
// adjust rsp
__ subptr(rsp, 14 * wordSize);
__ call_VM(noreg,
CAST_FROM_FN_PTR(address,
InterpreterRuntime::slow_signature_handler),
rbx, r14, c_rarg3);
// rax: result handler
// Stack layout:
// rsp: 5 integer args (if static first is unused)
// 1 float/double identifiers
// 8 double args
// return address
// stack args
// garbage
// expression stack bottom
// bcp (NULL)
// ...
// Do FP first so we can use c_rarg3 as temp
__ movl(c_rarg3, Address(rsp, 5 * wordSize)); // float/double identifiers
for (int i = 0; i < Argument::n_float_register_parameters_c; i++) {
const XMMRegister r = as_XMMRegister(i);
Label d, done;
__ testl(c_rarg3, 1 << i);
__ jcc(Assembler::notZero, d);
__ movflt(r, Address(rsp, (6 + i) * wordSize));
__ jmp(done);
__ bind(d);
__ movdbl(r, Address(rsp, (6 + i) * wordSize));
__ bind(done);
}
// Now handle integrals. Only do c_rarg1 if not static.
__ movl(c_rarg3, Address(rbx, Method::access_flags_offset()));
__ testl(c_rarg3, JVM_ACC_STATIC);
__ cmovptr(Assembler::zero, c_rarg1, Address(rsp, 0));
__ movptr(c_rarg2, Address(rsp, wordSize));
__ movptr(c_rarg3, Address(rsp, 2 * wordSize));
__ movptr(c_rarg4, Address(rsp, 3 * wordSize));
__ movptr(c_rarg5, Address(rsp, 4 * wordSize));
// restore rsp
__ addptr(rsp, 14 * wordSize);
__ ret(0);
return entry;
}
address JNI_FastGetField::generate_fast_get_float_field0(BasicType type) {
const char *name;
switch (type) {
case T_FLOAT: name = "jni_fast_GetFloatField"; break;
case T_DOUBLE: name = "jni_fast_GetDoubleField"; break;
default: ShouldNotReachHere();
}
ResourceMark rm;
BufferBlob* b = BufferBlob::create(name, BUFFER_SIZE*wordSize);
address fast_entry = b->instructions_begin();
CodeBuffer cbuf(fast_entry, b->instructions_size());
MacroAssembler* masm = new MacroAssembler(&cbuf);
Label slow_with_pop, slow;
// stack layout: offset from rsp (in words):
// return pc 0
// jni env 1
// obj 2
// jfieldID 3
ExternalAddress counter(SafepointSynchronize::safepoint_counter_addr());
__ mov32 (rcx, counter);
__ testb (rcx, 1);
__ jcc (Assembler::notZero, slow);
if (os::is_MP()) {
__ mov(rax, rcx);
__ andptr(rax, 1); // rax, must end up 0
__ movptr(rdx, Address(rsp, rax, Address::times_1, 2*wordSize));
// obj, notice rax, is 0.
// rdx is data dependent on rcx.
} else {
__ movptr(rdx, Address(rsp, 2*wordSize)); // obj
}
__ movptr(rax, Address(rsp, 3*wordSize)); // jfieldID
__ movptr(rdx, Address(rdx, 0)); // *obj
__ shrptr(rax, 2); // offset
assert(count < LIST_CAPACITY, "LIST_CAPACITY too small");
speculative_load_pclist[count] = __ pc();
switch (type) {
#ifndef _LP64
case T_FLOAT: __ fld_s (Address(rdx, rax, Address::times_1)); break;
case T_DOUBLE: __ fld_d (Address(rdx, rax, Address::times_1)); break;
#else
case T_FLOAT: __ movflt (xmm0, Address(robj, roffset, Address::times_1)); break;
case T_DOUBLE: __ movdbl (xmm0, Address(robj, roffset, Address::times_1)); break;
#endif // _LP64
default: ShouldNotReachHere();
}
Address ca1;
if (os::is_MP()) {
__ fst_s (Address(rsp, -4));
__ lea(rdx, counter);
__ movl (rax, Address(rsp, -4));
// garbage hi-order bits on 64bit are harmless.
__ xorptr(rdx, rax);
__ xorptr(rdx, rax);
__ cmp32(rcx, Address(rdx, 0));
// rax, ^ counter_addr ^ rax, = address
// ca1 is data dependent on the field
// access.
} else {
__ cmp32(rcx, counter);
}
__ jcc (Assembler::notEqual, slow_with_pop);
#ifndef _WINDOWS
__ ret (0);
#else
// __stdcall calling convention
__ ret (3*wordSize);
#endif
__ bind (slow_with_pop);
// invalid load. pop FPU stack.
__ fstp_d (0);
slowcase_entry_pclist[count++] = __ pc();
__ bind (slow);
address slow_case_addr;
switch (type) {
case T_FLOAT: slow_case_addr = jni_GetFloatField_addr(); break;
case T_DOUBLE: slow_case_addr = jni_GetDoubleField_addr(); break;
default: ShouldNotReachHere();
}
// tail call
__ jump (ExternalAddress(slow_case_addr));
__ flush ();
#ifndef _WINDOWS
return fast_entry;
#else
switch (type) {
case T_FLOAT: jni_fast_GetFloatField_fp = (GetFloatField_t)fast_entry; break;
case T_DOUBLE: jni_fast_GetDoubleField_fp = (GetDoubleField_t)fast_entry;
}
return os::win32::fast_jni_accessor_wrapper(type);
#endif
}
address JNI_FastGetField::generate_fast_get_float_field0(BasicType type) {
const char *name;
switch (type) {
case T_FLOAT: name = "jni_fast_GetFloatField"; break;
case T_DOUBLE: name = "jni_fast_GetDoubleField"; break;
default: ShouldNotReachHere();
}
ResourceMark rm;
BufferBlob* b = BufferBlob::create(name, BUFFER_SIZE);
address fast_entry = b->instructions_begin();
CodeBuffer cbuf(fast_entry, b->instructions_size());
MacroAssembler* masm = new MacroAssembler(&cbuf);
Label slow;
ExternalAddress counter(SafepointSynchronize::safepoint_counter_addr());
__ mov32 (rcounter, counter);
__ mov (robj, c_rarg1);
__ testb (rcounter, 1);
__ jcc (Assembler::notZero, slow);
if (os::is_MP()) {
__ xorptr(robj, rcounter);
__ xorptr(robj, rcounter); // obj, since
// robj ^ rcounter ^ rcounter == robj
// robj is data dependent on rcounter.
}
__ movptr(robj, Address(robj, 0)); // *obj
__ mov (roffset, c_rarg2);
__ shrptr(roffset, 2); // offset
assert(count < LIST_CAPACITY, "LIST_CAPACITY too small");
speculative_load_pclist[count] = __ pc();
switch (type) {
case T_FLOAT: __ movflt (xmm0, Address(robj, roffset, Address::times_1)); break;
case T_DOUBLE: __ movdbl (xmm0, Address(robj, roffset, Address::times_1)); break;
default: ShouldNotReachHere();
}
if (os::is_MP()) {
__ lea(rcounter_addr, counter);
__ movdq (rax, xmm0);
// counter address is data dependent on xmm0.
__ xorptr(rcounter_addr, rax);
__ xorptr(rcounter_addr, rax);
__ cmpl (rcounter, Address(rcounter_addr, 0));
} else {
__ cmp32 (rcounter, counter);
}
__ jcc (Assembler::notEqual, slow);
__ ret (0);
slowcase_entry_pclist[count++] = __ pc();
__ bind (slow);
address slow_case_addr;
switch (type) {
case T_FLOAT: slow_case_addr = jni_GetFloatField_addr(); break;
case T_DOUBLE: slow_case_addr = jni_GetDoubleField_addr();
}
// tail call
__ jump (ExternalAddress(slow_case_addr));
__ flush ();
return fast_entry;
}
//------------------------------------------------------------------------------
// MethodHandles::generate_method_handle_stub
//
// Generate an "entry" field for a method handle.
// This determines how the method handle will respond to calls.
void MethodHandles::generate_method_handle_stub(MacroAssembler* _masm, MethodHandles::EntryKind ek) {
// Here is the register state during an interpreted call,
// as set up by generate_method_handle_interpreter_entry():
// - rbx: garbage temp (was MethodHandle.invoke methodOop, unused)
// - rcx: receiver method handle
// - rax: method handle type (only used by the check_mtype entry point)
// - rsi/r13: sender SP (must preserve; see prepare_to_jump_from_interpreted)
// - rdx: garbage temp, can blow away
const Register rcx_recv = rcx;
const Register rax_argslot = rax;
const Register rbx_temp = rbx;
const Register rdx_temp = rdx;
// This guy is set up by prepare_to_jump_from_interpreted (from interpreted calls)
// and gen_c2i_adapter (from compiled calls):
const Register saved_last_sp = LP64_ONLY(r13) NOT_LP64(rsi);
// Argument registers for _raise_exception.
// 32-bit: Pass first two oop/int args in registers ECX and EDX.
const Register rarg0_code = LP64_ONLY(j_rarg0) NOT_LP64(rcx);
const Register rarg1_actual = LP64_ONLY(j_rarg1) NOT_LP64(rdx);
const Register rarg2_required = LP64_ONLY(j_rarg2) NOT_LP64(rdi);
assert_different_registers(rarg0_code, rarg1_actual, rarg2_required, saved_last_sp);
guarantee(java_lang_invoke_MethodHandle::vmentry_offset_in_bytes() != 0, "must have offsets");
// some handy addresses
Address rbx_method_fie( rbx, methodOopDesc::from_interpreted_offset() );
Address rbx_method_fce( rbx, methodOopDesc::from_compiled_offset() );
Address rcx_mh_vmtarget( rcx_recv, java_lang_invoke_MethodHandle::vmtarget_offset_in_bytes() );
Address rcx_dmh_vmindex( rcx_recv, java_lang_invoke_DirectMethodHandle::vmindex_offset_in_bytes() );
Address rcx_bmh_vmargslot( rcx_recv, java_lang_invoke_BoundMethodHandle::vmargslot_offset_in_bytes() );
Address rcx_bmh_argument( rcx_recv, java_lang_invoke_BoundMethodHandle::argument_offset_in_bytes() );
Address rcx_amh_vmargslot( rcx_recv, java_lang_invoke_AdapterMethodHandle::vmargslot_offset_in_bytes() );
Address rcx_amh_argument( rcx_recv, java_lang_invoke_AdapterMethodHandle::argument_offset_in_bytes() );
Address rcx_amh_conversion( rcx_recv, java_lang_invoke_AdapterMethodHandle::conversion_offset_in_bytes() );
Address vmarg; // __ argument_address(vmargslot)
const int java_mirror_offset = klassOopDesc::klass_part_offset_in_bytes() + Klass::java_mirror_offset_in_bytes();
if (have_entry(ek)) {
__ nop(); // empty stubs make SG sick
return;
}
address interp_entry = __ pc();
trace_method_handle(_masm, entry_name(ek));
BLOCK_COMMENT(entry_name(ek));
switch ((int) ek) {
case _raise_exception:
{
// Not a real MH entry, but rather shared code for raising an
// exception. Since we use the compiled entry, arguments are
// expected in compiler argument registers.
assert(raise_exception_method(), "must be set");
assert(raise_exception_method()->from_compiled_entry(), "method must be linked");
const Register rdi_pc = rax;
__ pop(rdi_pc); // caller PC
__ mov(rsp, saved_last_sp); // cut the stack back to where the caller started
Register rbx_method = rbx_temp;
Label L_no_method;
// FIXME: fill in _raise_exception_method with a suitable java.lang.invoke method
__ movptr(rbx_method, ExternalAddress((address) &_raise_exception_method));
__ testptr(rbx_method, rbx_method);
__ jccb(Assembler::zero, L_no_method);
const int jobject_oop_offset = 0;
__ movptr(rbx_method, Address(rbx_method, jobject_oop_offset)); // dereference the jobject
__ testptr(rbx_method, rbx_method);
__ jccb(Assembler::zero, L_no_method);
__ verify_oop(rbx_method);
NOT_LP64(__ push(rarg2_required));
__ push(rdi_pc); // restore caller PC
__ jmp(rbx_method_fce); // jump to compiled entry
// Do something that is at least causes a valid throw from the interpreter.
__ bind(L_no_method);
__ push(rarg2_required);
__ push(rarg1_actual);
__ jump(ExternalAddress(Interpreter::throw_WrongMethodType_entry()));
}
break;
case _invokestatic_mh:
case _invokespecial_mh:
{
Register rbx_method = rbx_temp;
__ load_heap_oop(rbx_method, rcx_mh_vmtarget); // target is a methodOop
__ verify_oop(rbx_method);
// same as TemplateTable::invokestatic or invokespecial,
// minus the CP setup and profiling:
if (ek == _invokespecial_mh) {
// Must load & check the first argument before entering the target method.
__ load_method_handle_vmslots(rax_argslot, rcx_recv, rdx_temp);
__ movptr(rcx_recv, __ argument_address(rax_argslot, -1));
__ null_check(rcx_recv);
__ verify_oop(rcx_recv);
}
__ jmp(rbx_method_fie);
}
break;
case _invokevirtual_mh:
{
// same as TemplateTable::invokevirtual,
// minus the CP setup and profiling:
// pick out the vtable index and receiver offset from the MH,
// and then we can discard it:
__ load_method_handle_vmslots(rax_argslot, rcx_recv, rdx_temp);
Register rbx_index = rbx_temp;
__ movl(rbx_index, rcx_dmh_vmindex);
// Note: The verifier allows us to ignore rcx_mh_vmtarget.
__ movptr(rcx_recv, __ argument_address(rax_argslot, -1));
__ null_check(rcx_recv, oopDesc::klass_offset_in_bytes());
// get receiver klass
Register rax_klass = rax_argslot;
__ load_klass(rax_klass, rcx_recv);
__ verify_oop(rax_klass);
// get target methodOop & entry point
const int base = instanceKlass::vtable_start_offset() * wordSize;
assert(vtableEntry::size() * wordSize == wordSize, "adjust the scaling in the code below");
Address vtable_entry_addr(rax_klass,
rbx_index, Address::times_ptr,
base + vtableEntry::method_offset_in_bytes());
Register rbx_method = rbx_temp;
__ movptr(rbx_method, vtable_entry_addr);
__ verify_oop(rbx_method);
__ jmp(rbx_method_fie);
}
break;
case _invokeinterface_mh:
{
// same as TemplateTable::invokeinterface,
// minus the CP setup and profiling:
// pick out the interface and itable index from the MH.
__ load_method_handle_vmslots(rax_argslot, rcx_recv, rdx_temp);
Register rdx_intf = rdx_temp;
Register rbx_index = rbx_temp;
__ load_heap_oop(rdx_intf, rcx_mh_vmtarget);
__ movl(rbx_index, rcx_dmh_vmindex);
__ movptr(rcx_recv, __ argument_address(rax_argslot, -1));
__ null_check(rcx_recv, oopDesc::klass_offset_in_bytes());
// get receiver klass
Register rax_klass = rax_argslot;
__ load_klass(rax_klass, rcx_recv);
__ verify_oop(rax_klass);
Register rdi_temp = rdi;
Register rbx_method = rbx_index;
// get interface klass
Label no_such_interface;
__ verify_oop(rdx_intf);
__ lookup_interface_method(rax_klass, rdx_intf,
// note: next two args must be the same:
rbx_index, rbx_method,
rdi_temp,
no_such_interface);
__ verify_oop(rbx_method);
__ jmp(rbx_method_fie);
__ hlt();
__ bind(no_such_interface);
// Throw an exception.
// For historical reasons, it will be IncompatibleClassChangeError.
__ mov(rbx_temp, rcx_recv); // rarg2_required might be RCX
assert_different_registers(rarg2_required, rbx_temp);
__ movptr(rarg2_required, Address(rdx_intf, java_mirror_offset)); // required interface
__ mov( rarg1_actual, rbx_temp); // bad receiver
__ movl( rarg0_code, (int) Bytecodes::_invokeinterface); // who is complaining?
__ jump(ExternalAddress(from_interpreted_entry(_raise_exception)));
}
break;
case _bound_ref_mh:
case _bound_int_mh:
case _bound_long_mh:
case _bound_ref_direct_mh:
case _bound_int_direct_mh:
case _bound_long_direct_mh:
{
bool direct_to_method = (ek >= _bound_ref_direct_mh);
BasicType arg_type = T_ILLEGAL;
int arg_mask = _INSERT_NO_MASK;
int arg_slots = -1;
get_ek_bound_mh_info(ek, arg_type, arg_mask, arg_slots);
// make room for the new argument:
__ movl(rax_argslot, rcx_bmh_vmargslot);
__ lea(rax_argslot, __ argument_address(rax_argslot));
insert_arg_slots(_masm, arg_slots * stack_move_unit(), arg_mask, rax_argslot, rbx_temp, rdx_temp);
// store bound argument into the new stack slot:
__ load_heap_oop(rbx_temp, rcx_bmh_argument);
if (arg_type == T_OBJECT) {
__ movptr(Address(rax_argslot, 0), rbx_temp);
} else {
Address prim_value_addr(rbx_temp, java_lang_boxing_object::value_offset_in_bytes(arg_type));
const int arg_size = type2aelembytes(arg_type);
__ load_sized_value(rdx_temp, prim_value_addr, arg_size, is_signed_subword_type(arg_type), rbx_temp);
__ store_sized_value(Address(rax_argslot, 0), rdx_temp, arg_size, rbx_temp);
}
if (direct_to_method) {
Register rbx_method = rbx_temp;
__ load_heap_oop(rbx_method, rcx_mh_vmtarget);
__ verify_oop(rbx_method);
__ jmp(rbx_method_fie);
} else {
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ verify_oop(rcx_recv);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
}
break;
case _adapter_retype_only:
case _adapter_retype_raw:
// immediately jump to the next MH layer:
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ verify_oop(rcx_recv);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
// This is OK when all parameter types widen.
// It is also OK when a return type narrows.
break;
case _adapter_check_cast:
{
// temps:
Register rbx_klass = rbx_temp; // interesting AMH data
// check a reference argument before jumping to the next layer of MH:
__ movl(rax_argslot, rcx_amh_vmargslot);
vmarg = __ argument_address(rax_argslot);
// What class are we casting to?
__ load_heap_oop(rbx_klass, rcx_amh_argument); // this is a Class object!
__ load_heap_oop(rbx_klass, Address(rbx_klass, java_lang_Class::klass_offset_in_bytes()));
Label done;
__ movptr(rdx_temp, vmarg);
__ testptr(rdx_temp, rdx_temp);
__ jcc(Assembler::zero, done); // no cast if null
__ load_klass(rdx_temp, rdx_temp);
// live at this point:
// - rbx_klass: klass required by the target method
// - rdx_temp: argument klass to test
// - rcx_recv: adapter method handle
__ check_klass_subtype(rdx_temp, rbx_klass, rax_argslot, done);
// If we get here, the type check failed!
// Call the wrong_method_type stub, passing the failing argument type in rax.
Register rax_mtype = rax_argslot;
__ movl(rax_argslot, rcx_amh_vmargslot); // reload argslot field
__ movptr(rdx_temp, vmarg);
assert_different_registers(rarg2_required, rdx_temp);
__ load_heap_oop(rarg2_required, rcx_amh_argument); // required class
__ mov( rarg1_actual, rdx_temp); // bad object
__ movl( rarg0_code, (int) Bytecodes::_checkcast); // who is complaining?
__ jump(ExternalAddress(from_interpreted_entry(_raise_exception)));
__ bind(done);
// get the new MH:
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_prim_to_prim:
case _adapter_ref_to_prim:
// handled completely by optimized cases
__ stop("init_AdapterMethodHandle should not issue this");
break;
case _adapter_opt_i2i: // optimized subcase of adapt_prim_to_prim
//case _adapter_opt_f2i: // optimized subcase of adapt_prim_to_prim
case _adapter_opt_l2i: // optimized subcase of adapt_prim_to_prim
case _adapter_opt_unboxi: // optimized subcase of adapt_ref_to_prim
{
// perform an in-place conversion to int or an int subword
__ movl(rax_argslot, rcx_amh_vmargslot);
vmarg = __ argument_address(rax_argslot);
switch (ek) {
case _adapter_opt_i2i:
__ movl(rdx_temp, vmarg);
break;
case _adapter_opt_l2i:
{
// just delete the extra slot; on a little-endian machine we keep the first
__ lea(rax_argslot, __ argument_address(rax_argslot, 1));
remove_arg_slots(_masm, -stack_move_unit(),
rax_argslot, rbx_temp, rdx_temp);
vmarg = Address(rax_argslot, -Interpreter::stackElementSize);
__ movl(rdx_temp, vmarg);
}
break;
case _adapter_opt_unboxi:
{
// Load the value up from the heap.
__ movptr(rdx_temp, vmarg);
int value_offset = java_lang_boxing_object::value_offset_in_bytes(T_INT);
#ifdef ASSERT
for (int bt = T_BOOLEAN; bt < T_INT; bt++) {
if (is_subword_type(BasicType(bt)))
assert(value_offset == java_lang_boxing_object::value_offset_in_bytes(BasicType(bt)), "");
}
#endif
__ null_check(rdx_temp, value_offset);
__ movl(rdx_temp, Address(rdx_temp, value_offset));
// We load this as a word. Because we are little-endian,
// the low bits will be correct, but the high bits may need cleaning.
// The vminfo will guide us to clean those bits.
}
break;
default:
ShouldNotReachHere();
}
// Do the requested conversion and store the value.
Register rbx_vminfo = rbx_temp;
__ movl(rbx_vminfo, rcx_amh_conversion);
assert(CONV_VMINFO_SHIFT == 0, "preshifted");
// get the new MH:
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
// (now we are done with the old MH)
// original 32-bit vmdata word must be of this form:
// | MBZ:6 | signBitCount:8 | srcDstTypes:8 | conversionOp:8 |
__ xchgptr(rcx, rbx_vminfo); // free rcx for shifts
__ shll(rdx_temp /*, rcx*/);
Label zero_extend, done;
__ testl(rcx, CONV_VMINFO_SIGN_FLAG);
__ jccb(Assembler::zero, zero_extend);
// this path is taken for int->byte, int->short
__ sarl(rdx_temp /*, rcx*/);
__ jmpb(done);
__ bind(zero_extend);
// this is taken for int->char
__ shrl(rdx_temp /*, rcx*/);
__ bind(done);
__ movl(vmarg, rdx_temp); // Store the value.
__ xchgptr(rcx, rbx_vminfo); // restore rcx_recv
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_opt_i2l: // optimized subcase of adapt_prim_to_prim
case _adapter_opt_unboxl: // optimized subcase of adapt_ref_to_prim
{
// perform an in-place int-to-long or ref-to-long conversion
__ movl(rax_argslot, rcx_amh_vmargslot);
// on a little-endian machine we keep the first slot and add another after
__ lea(rax_argslot, __ argument_address(rax_argslot, 1));
insert_arg_slots(_masm, stack_move_unit(), _INSERT_INT_MASK,
rax_argslot, rbx_temp, rdx_temp);
Address vmarg1(rax_argslot, -Interpreter::stackElementSize);
Address vmarg2 = vmarg1.plus_disp(Interpreter::stackElementSize);
switch (ek) {
case _adapter_opt_i2l:
{
#ifdef _LP64
__ movslq(rdx_temp, vmarg1); // Load sign-extended
__ movq(vmarg1, rdx_temp); // Store into first slot
#else
__ movl(rdx_temp, vmarg1);
__ sarl(rdx_temp, BitsPerInt - 1); // __ extend_sign()
__ movl(vmarg2, rdx_temp); // store second word
#endif
}
break;
case _adapter_opt_unboxl:
{
// Load the value up from the heap.
__ movptr(rdx_temp, vmarg1);
int value_offset = java_lang_boxing_object::value_offset_in_bytes(T_LONG);
assert(value_offset == java_lang_boxing_object::value_offset_in_bytes(T_DOUBLE), "");
__ null_check(rdx_temp, value_offset);
#ifdef _LP64
__ movq(rbx_temp, Address(rdx_temp, value_offset));
__ movq(vmarg1, rbx_temp);
#else
__ movl(rbx_temp, Address(rdx_temp, value_offset + 0*BytesPerInt));
__ movl(rdx_temp, Address(rdx_temp, value_offset + 1*BytesPerInt));
__ movl(vmarg1, rbx_temp);
__ movl(vmarg2, rdx_temp);
#endif
}
break;
default:
ShouldNotReachHere();
}
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_opt_f2d: // optimized subcase of adapt_prim_to_prim
case _adapter_opt_d2f: // optimized subcase of adapt_prim_to_prim
{
// perform an in-place floating primitive conversion
__ movl(rax_argslot, rcx_amh_vmargslot);
__ lea(rax_argslot, __ argument_address(rax_argslot, 1));
if (ek == _adapter_opt_f2d) {
insert_arg_slots(_masm, stack_move_unit(), _INSERT_INT_MASK,
rax_argslot, rbx_temp, rdx_temp);
}
Address vmarg(rax_argslot, -Interpreter::stackElementSize);
#ifdef _LP64
if (ek == _adapter_opt_f2d) {
__ movflt(xmm0, vmarg);
__ cvtss2sd(xmm0, xmm0);
__ movdbl(vmarg, xmm0);
} else {
__ movdbl(xmm0, vmarg);
__ cvtsd2ss(xmm0, xmm0);
__ movflt(vmarg, xmm0);
}
#else //_LP64
if (ek == _adapter_opt_f2d) {
__ fld_s(vmarg); // load float to ST0
__ fstp_s(vmarg); // store single
} else {
__ fld_d(vmarg); // load double to ST0
__ fstp_s(vmarg); // store single
}
#endif //_LP64
if (ek == _adapter_opt_d2f) {
remove_arg_slots(_masm, -stack_move_unit(),
rax_argslot, rbx_temp, rdx_temp);
}
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_prim_to_ref:
__ unimplemented(entry_name(ek)); // %%% FIXME: NYI
break;
case _adapter_swap_args:
case _adapter_rot_args:
// handled completely by optimized cases
__ stop("init_AdapterMethodHandle should not issue this");
break;
case _adapter_opt_swap_1:
case _adapter_opt_swap_2:
case _adapter_opt_rot_1_up:
case _adapter_opt_rot_1_down:
case _adapter_opt_rot_2_up:
case _adapter_opt_rot_2_down:
{
int swap_bytes = 0, rotate = 0;
get_ek_adapter_opt_swap_rot_info(ek, swap_bytes, rotate);
// 'argslot' is the position of the first argument to swap
__ movl(rax_argslot, rcx_amh_vmargslot);
__ lea(rax_argslot, __ argument_address(rax_argslot));
// 'vminfo' is the second
Register rbx_destslot = rbx_temp;
__ movl(rbx_destslot, rcx_amh_conversion);
assert(CONV_VMINFO_SHIFT == 0, "preshifted");
__ andl(rbx_destslot, CONV_VMINFO_MASK);
__ lea(rbx_destslot, __ argument_address(rbx_destslot));
DEBUG_ONLY(verify_argslot(_masm, rbx_destslot, "swap point must fall within current frame"));
if (!rotate) {
for (int i = 0; i < swap_bytes; i += wordSize) {
__ movptr(rdx_temp, Address(rax_argslot , i));
__ push(rdx_temp);
__ movptr(rdx_temp, Address(rbx_destslot, i));
__ movptr(Address(rax_argslot, i), rdx_temp);
__ pop(rdx_temp);
__ movptr(Address(rbx_destslot, i), rdx_temp);
}
} else {
// push the first chunk, which is going to get overwritten
for (int i = swap_bytes; (i -= wordSize) >= 0; ) {
__ movptr(rdx_temp, Address(rax_argslot, i));
__ push(rdx_temp);
}
if (rotate > 0) {
// rotate upward
__ subptr(rax_argslot, swap_bytes);
#ifdef ASSERT
{
// Verify that argslot > destslot, by at least swap_bytes.
Label L_ok;
__ cmpptr(rax_argslot, rbx_destslot);
__ jccb(Assembler::aboveEqual, L_ok);
__ stop("source must be above destination (upward rotation)");
__ bind(L_ok);
}
#endif
// work argslot down to destslot, copying contiguous data upwards
// pseudo-code:
// rax = src_addr - swap_bytes
// rbx = dest_addr
// while (rax >= rbx) *(rax + swap_bytes) = *(rax + 0), rax--;
Label loop;
__ bind(loop);
__ movptr(rdx_temp, Address(rax_argslot, 0));
__ movptr(Address(rax_argslot, swap_bytes), rdx_temp);
__ addptr(rax_argslot, -wordSize);
__ cmpptr(rax_argslot, rbx_destslot);
__ jccb(Assembler::aboveEqual, loop);
} else {
__ addptr(rax_argslot, swap_bytes);
#ifdef ASSERT
{
// Verify that argslot < destslot, by at least swap_bytes.
Label L_ok;
__ cmpptr(rax_argslot, rbx_destslot);
__ jccb(Assembler::belowEqual, L_ok);
__ stop("source must be below destination (downward rotation)");
__ bind(L_ok);
}
#endif
// work argslot up to destslot, copying contiguous data downwards
// pseudo-code:
// rax = src_addr + swap_bytes
// rbx = dest_addr
// while (rax <= rbx) *(rax - swap_bytes) = *(rax + 0), rax++;
Label loop;
__ bind(loop);
__ movptr(rdx_temp, Address(rax_argslot, 0));
__ movptr(Address(rax_argslot, -swap_bytes), rdx_temp);
__ addptr(rax_argslot, wordSize);
__ cmpptr(rax_argslot, rbx_destslot);
__ jccb(Assembler::belowEqual, loop);
}
// pop the original first chunk into the destination slot, now free
for (int i = 0; i < swap_bytes; i += wordSize) {
__ pop(rdx_temp);
__ movptr(Address(rbx_destslot, i), rdx_temp);
}
}
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_dup_args:
{
// 'argslot' is the position of the first argument to duplicate
__ movl(rax_argslot, rcx_amh_vmargslot);
__ lea(rax_argslot, __ argument_address(rax_argslot));
// 'stack_move' is negative number of words to duplicate
Register rdx_stack_move = rdx_temp;
__ movl2ptr(rdx_stack_move, rcx_amh_conversion);
__ sarptr(rdx_stack_move, CONV_STACK_MOVE_SHIFT);
int argslot0_num = 0;
Address argslot0 = __ argument_address(RegisterOrConstant(argslot0_num));
assert(argslot0.base() == rsp, "");
int pre_arg_size = argslot0.disp();
assert(pre_arg_size % wordSize == 0, "");
assert(pre_arg_size > 0, "must include PC");
// remember the old rsp+1 (argslot[0])
Register rbx_oldarg = rbx_temp;
__ lea(rbx_oldarg, argslot0);
// move rsp down to make room for dups
__ lea(rsp, Address(rsp, rdx_stack_move, Address::times_ptr));
// compute the new rsp+1 (argslot[0])
Register rdx_newarg = rdx_temp;
__ lea(rdx_newarg, argslot0);
__ push(rdi); // need a temp
// (preceding push must be done after arg addresses are taken!)
// pull down the pre_arg_size data (PC)
for (int i = -pre_arg_size; i < 0; i += wordSize) {
__ movptr(rdi, Address(rbx_oldarg, i));
__ movptr(Address(rdx_newarg, i), rdi);
}
// copy from rax_argslot[0...] down to new_rsp[1...]
// pseudo-code:
// rbx = old_rsp+1
// rdx = new_rsp+1
// rax = argslot
// while (rdx < rbx) *rdx++ = *rax++
Label loop;
__ bind(loop);
__ movptr(rdi, Address(rax_argslot, 0));
__ movptr(Address(rdx_newarg, 0), rdi);
__ addptr(rax_argslot, wordSize);
__ addptr(rdx_newarg, wordSize);
__ cmpptr(rdx_newarg, rbx_oldarg);
__ jccb(Assembler::less, loop);
__ pop(rdi); // restore temp
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_drop_args:
{
// 'argslot' is the position of the first argument to nuke
__ movl(rax_argslot, rcx_amh_vmargslot);
__ lea(rax_argslot, __ argument_address(rax_argslot));
__ push(rdi); // need a temp
// (must do previous push after argslot address is taken)
// 'stack_move' is number of words to drop
Register rdi_stack_move = rdi;
__ movl2ptr(rdi_stack_move, rcx_amh_conversion);
__ sarptr(rdi_stack_move, CONV_STACK_MOVE_SHIFT);
remove_arg_slots(_masm, rdi_stack_move,
rax_argslot, rbx_temp, rdx_temp);
__ pop(rdi); // restore temp
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
}
break;
case _adapter_collect_args:
__ unimplemented(entry_name(ek)); // %%% FIXME: NYI
break;
case _adapter_spread_args:
// handled completely by optimized cases
__ stop("init_AdapterMethodHandle should not issue this");
break;
case _adapter_opt_spread_0:
case _adapter_opt_spread_1:
case _adapter_opt_spread_more:
{
// spread an array out into a group of arguments
int length_constant = get_ek_adapter_opt_spread_info(ek);
// find the address of the array argument
__ movl(rax_argslot, rcx_amh_vmargslot);
__ lea(rax_argslot, __ argument_address(rax_argslot));
// grab some temps
{ __ push(rsi); __ push(rdi); }
// (preceding pushes must be done after argslot address is taken!)
#define UNPUSH_RSI_RDI \
{ __ pop(rdi); __ pop(rsi); }
// arx_argslot points both to the array and to the first output arg
vmarg = Address(rax_argslot, 0);
// Get the array value.
Register rsi_array = rsi;
Register rdx_array_klass = rdx_temp;
BasicType elem_type = T_OBJECT;
int length_offset = arrayOopDesc::length_offset_in_bytes();
int elem0_offset = arrayOopDesc::base_offset_in_bytes(elem_type);
__ movptr(rsi_array, vmarg);
Label skip_array_check;
if (length_constant == 0) {
__ testptr(rsi_array, rsi_array);
__ jcc(Assembler::zero, skip_array_check);
}
__ null_check(rsi_array, oopDesc::klass_offset_in_bytes());
__ load_klass(rdx_array_klass, rsi_array);
// Check the array type.
Register rbx_klass = rbx_temp;
__ load_heap_oop(rbx_klass, rcx_amh_argument); // this is a Class object!
__ load_heap_oop(rbx_klass, Address(rbx_klass, java_lang_Class::klass_offset_in_bytes()));
Label ok_array_klass, bad_array_klass, bad_array_length;
__ check_klass_subtype(rdx_array_klass, rbx_klass, rdi, ok_array_klass);
// If we get here, the type check failed!
__ jmp(bad_array_klass);
__ bind(ok_array_klass);
// Check length.
if (length_constant >= 0) {
__ cmpl(Address(rsi_array, length_offset), length_constant);
} else {
Register rbx_vminfo = rbx_temp;
__ movl(rbx_vminfo, rcx_amh_conversion);
assert(CONV_VMINFO_SHIFT == 0, "preshifted");
__ andl(rbx_vminfo, CONV_VMINFO_MASK);
__ cmpl(rbx_vminfo, Address(rsi_array, length_offset));
}
__ jcc(Assembler::notEqual, bad_array_length);
Register rdx_argslot_limit = rdx_temp;
// Array length checks out. Now insert any required stack slots.
if (length_constant == -1) {
// Form a pointer to the end of the affected region.
__ lea(rdx_argslot_limit, Address(rax_argslot, Interpreter::stackElementSize));
// 'stack_move' is negative number of words to insert
Register rdi_stack_move = rdi;
__ movl2ptr(rdi_stack_move, rcx_amh_conversion);
__ sarptr(rdi_stack_move, CONV_STACK_MOVE_SHIFT);
Register rsi_temp = rsi_array; // spill this
insert_arg_slots(_masm, rdi_stack_move, -1,
rax_argslot, rbx_temp, rsi_temp);
// reload the array (since rsi was killed)
__ movptr(rsi_array, vmarg);
} else if (length_constant > 1) {
int arg_mask = 0;
int new_slots = (length_constant - 1);
for (int i = 0; i < new_slots; i++) {
arg_mask <<= 1;
arg_mask |= _INSERT_REF_MASK;
}
insert_arg_slots(_masm, new_slots * stack_move_unit(), arg_mask,
rax_argslot, rbx_temp, rdx_temp);
} else if (length_constant == 1) {
// no stack resizing required
} else if (length_constant == 0) {
remove_arg_slots(_masm, -stack_move_unit(),
rax_argslot, rbx_temp, rdx_temp);
}
// Copy from the array to the new slots.
// Note: Stack change code preserves integrity of rax_argslot pointer.
// So even after slot insertions, rax_argslot still points to first argument.
if (length_constant == -1) {
// [rax_argslot, rdx_argslot_limit) is the area we are inserting into.
Register rsi_source = rsi_array;
__ lea(rsi_source, Address(rsi_array, elem0_offset));
Label loop;
__ bind(loop);
__ movptr(rbx_temp, Address(rsi_source, 0));
__ movptr(Address(rax_argslot, 0), rbx_temp);
__ addptr(rsi_source, type2aelembytes(elem_type));
__ addptr(rax_argslot, Interpreter::stackElementSize);
__ cmpptr(rax_argslot, rdx_argslot_limit);
__ jccb(Assembler::less, loop);
} else if (length_constant == 0) {
__ bind(skip_array_check);
// nothing to copy
} else {
int elem_offset = elem0_offset;
int slot_offset = 0;
for (int index = 0; index < length_constant; index++) {
__ movptr(rbx_temp, Address(rsi_array, elem_offset));
__ movptr(Address(rax_argslot, slot_offset), rbx_temp);
elem_offset += type2aelembytes(elem_type);
slot_offset += Interpreter::stackElementSize;
}
}
// Arguments are spread. Move to next method handle.
UNPUSH_RSI_RDI;
__ load_heap_oop(rcx_recv, rcx_mh_vmtarget);
__ jump_to_method_handle_entry(rcx_recv, rdx_temp);
__ bind(bad_array_klass);
UNPUSH_RSI_RDI;
assert(!vmarg.uses(rarg2_required), "must be different registers");
__ movptr(rarg2_required, Address(rdx_array_klass, java_mirror_offset)); // required type
__ movptr(rarg1_actual, vmarg); // bad array
__ movl( rarg0_code, (int) Bytecodes::_aaload); // who is complaining?
__ jump(ExternalAddress(from_interpreted_entry(_raise_exception)));
__ bind(bad_array_length);
UNPUSH_RSI_RDI;
assert(!vmarg.uses(rarg2_required), "must be different registers");
__ mov (rarg2_required, rcx_recv); // AMH requiring a certain length
__ movptr(rarg1_actual, vmarg); // bad array
__ movl( rarg0_code, (int) Bytecodes::_arraylength); // who is complaining?
__ jump(ExternalAddress(from_interpreted_entry(_raise_exception)));
#undef UNPUSH_RSI_RDI
}
break;
case _adapter_flyby:
case _adapter_ricochet:
__ unimplemented(entry_name(ek)); // %%% FIXME: NYI
break;
default: ShouldNotReachHere();
}
__ hlt();
address me_cookie = MethodHandleEntry::start_compiled_entry(_masm, interp_entry);
__ unimplemented(entry_name(ek)); // %%% FIXME: NYI
init_entry(ek, MethodHandleEntry::finish_compiled_entry(_masm, me_cookie));
}