static void __init msm7x2x_init(void)
{
msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);
#if defined(CONFIG_MSM_SERIAL_DEBUGGER)
msm_serial_debug_init(MSM_UART1_PHYS, INT_UART1,
&msm_device_uart1.dev, 1);
#endif
if (cpu_is_msm7x27())
msm7x2x_clock_data.max_axi_khz = 200000;
msm_acpu_clock_init(&msm7x2x_clock_data);
msm_add_pmem_devices();
msm_add_fb_device();
#if !defined(CONFIG_MSM_SERIAL_DEBUGGER)
if (lge_get_uart_mode())
platform_device_register(&msm_device_uart3);
#endif
platform_add_devices(devices, ARRAY_SIZE(devices));
#ifdef CONFIG_ARCH_MSM7X27
msm_add_kgsl_device();
#endif
msm_add_usb_devices();
#ifdef CONFIG_MSM_CAMERA
config_camera_off_gpios(); /* might not be necessary */
#endif
msm_device_i2c_init();
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
if (cpu_is_msm7x27())
msm_pm_set_platform_data(msm7x27_pm_data,
ARRAY_SIZE(msm7x27_pm_data));
else
msm_pm_set_platform_data(msm7x25_pm_data,
ARRAY_SIZE(msm7x25_pm_data));
msm7x27_wlan_init();
#ifdef CONFIG_ANDROID_RAM_CONSOLE
lge_add_ramconsole_devices();
lge_add_ers_devices();
lge_add_panic_handler_devices();
#endif
lge_add_camera_devices();
lge_add_lcd_devices();
lge_add_btpower_devices();
lge_add_mmc_devices();
lge_add_input_devices();
lge_add_misc_devices();
lge_add_pm_devices();
lge_add_gpio_i2c_devices();
create_testmode_status();
create_sw_version_status();
create_smpl_reset_status();
create_qpst_enable_status();
}
static void __init msm_pm_init(void)
{
if (!cpu_is_msm8625()) {
msm_pm_set_platform_data(msm7627a_pm_data,
ARRAY_SIZE(msm7627a_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
} else {
msm_pm_set_platform_data(msm8625_pm_data,
ARRAY_SIZE(msm8625_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_8625_boot_pdata));
msm8x25_spm_device_init();
}
}
static void __init msm7x27a_pm_init(void)
{
if (machine_is_msm8625_surf() || machine_is_msm8625_ffa()) {
msm_pm_set_platform_data(msm8625_pm_data,
ARRAY_SIZE(msm8625_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_8625_boot_pdata));
msm8x25_spm_device_init();
} else {
msm_pm_set_platform_data(msm7x27a_pm_data,
ARRAY_SIZE(msm7x27a_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
}
msm_pm_register_irqs();
}
static void __init qsd8x50_init(void)
{
if (socinfo_init() < 0)
printk(KERN_ERR "%s: socinfo_init() failed!\n",
__func__);
qsd8x50_cfg_smc91x();
msm_acpu_clock_init(&qsd8x50_clock_data);
msm_device_hsusb_peripheral.dev.platform_data = &msm_hsusb_pdata;
msm_device_hsusb_host.dev.platform_data = &msm_hsusb_pdata;
platform_add_devices(devices, ARRAY_SIZE(devices));
msm_fb_add_devices();
msm_camera_add_device();
qsd8x50_init_mmc();
bt_power_init();
audio_gpio_init();
msm_device_i2c_init();
i2c_register_board_info(0, msm_i2c_board_info,
ARRAY_SIZE(msm_i2c_board_info));
spi_register_board_info(msm_spi_board_info,
ARRAY_SIZE(msm_spi_board_info));
msm_pm_set_platform_data(msm_pm_data);
#ifdef CONFIG_SURF_FFA_GPIO_KEYPAD
if (machine_is_qsd8x50_ffa())
platform_device_register(&keypad_device_8k_ffa);
else
platform_device_register(&keypad_device_surf);
#endif
}
static void __init msm9615_common_init(void)
{
msm9615_device_init();
msm9615_init_gpiomux();
msm9615_i2c_init();
regulator_suppress_info_printing();
platform_device_register(&msm9615_device_rpm_regulator);
msm_clock_init(&msm9615_clock_init_data);
msm9615_init_buses();
msm9615_device_qup_spi_gsbi3.dev.platform_data =
&msm9615_qup_spi_gsbi3_pdata;
msm9615_device_ssbi_pmic1.dev.platform_data =
&msm9615_ssbi_pm8018_pdata;
pm8018_platform_data.num_regulators = msm_pm8018_regulator_pdata_len;
msm_device_otg.dev.platform_data = &msm_otg_pdata;
msm_otg_pdata.phy_init_seq = shelby_phy_init_seq;
msm_device_usb_bam.dev.platform_data = &msm_usb_bam_pdata;
platform_add_devices(common_devices, ARRAY_SIZE(common_devices));
acpuclk_init(&acpuclk_9615_soc_data);
/* Ensure ar6000pm device is registered before MMC/SDC */
msm9615_init_ar6000pm();
msm9615_init_mmc();
msm_pm_set_platform_data(msm_pm_data, ARRAY_SIZE(msm_pm_data));
msm_pm_set_rpm_wakeup_irq(RPM_APCC_CPU0_WAKE_UP_IRQ);
msm_cpuidle_set_states(msm_cstates, ARRAY_SIZE(msm_cstates),
msm_pm_data);
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
}
void __init msm8960_pm_init(unsigned wakeup_irq)
{
msm_pm_set_platform_data(msm_pm_data, ARRAY_SIZE(msm_pm_data));
msm_pm_set_rpm_wakeup_irq(wakeup_irq);
msm_cpuidle_set_states(msm_cstates, ARRAY_SIZE(msm_cstates),
msm_pm_data);
}
static void __init msm_pm_init(void)
{
#if 0
if (machine_is_msm8625_qrd7())
return;
#endif
if (!(machine_is_msm8625_evb() || machine_is_msm8625_qrd5() || machine_is_msm8625_skua() || machine_is_msm8625_qrd7() || machine_is_msm8625_skub())) {
msm_pm_set_platform_data(msm7627a_pm_data,
ARRAY_SIZE(msm7627a_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
} else {
msm_pm_set_platform_data(msm8625_pm_data,
ARRAY_SIZE(msm8625_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_8625_boot_pdata));
msm8x25_spm_device_init();
}
}
static void __init htcleo_init(void)
{
// Cotulla vibro test
// *(uint32_t*)0xF800380C |= 0x20;
printk("htcleo_init()\n");
msm_hw_reset_hook = htcleo_reset;
do_grp_reset();
do_sdc1_reset();
msm_clock_init(&qds8x50_clock_init_data);
acpuclk_init(&acpuclk_8x50_soc_data);
init_dex_comm();
#ifdef CONFIG_SERIAL_MSM_HS
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#if 0
msm_device_uart_dm1.name = "msm_serial_hs_brcm"; /* for bcm */
msm_device_uart_dm1.resource[3].end = 6;
#endif
#endif
config_gpio_table(bt_gpio_table, ARRAY_SIZE(bt_gpio_table));
htcleo_audio_init();
msm_device_i2c_init();
platform_add_devices(devices, ARRAY_SIZE(devices));
platform_add_devices(msm_footswitch_devices,
msm_num_footswitch_devices);
htcleo_init_panel();
#ifdef CONFIG_USB_G_ANDROID
htcleo_add_usb_devices();
#endif
msm_pm_set_platform_data(msm_pm_data, ARRAY_SIZE(msm_pm_data));
i2c_register_board_info(0, base_i2c_devices, ARRAY_SIZE(base_i2c_devices));
htcleo_init_mmc(0);
platform_device_register(&htcleo_timed_gpios);
#ifdef CONFIG_HTCLEO_BLINK_ON_BOOT
/* Blink the camera LED shortly to show that we're alive! */
htcleo_blink_camera_led();
#endif // CONFIG_HTCLEO_BLINK_ON_BOOT
}
static void __init msm7x27a_pm_init(void)
{
#ifdef CONFIG_HUAWEI_KERNEL
if (machine_is_msm8625_surf() || machine_is_msm8625_ffa()
|| cpu_is_msm8625())
#else
if (machine_is_msm8625_surf() || machine_is_msm8625_ffa())
#endif
{
msm_pm_set_platform_data(msm8625_pm_data,
ARRAY_SIZE(msm8625_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_8625_boot_pdata));
msm8x25_spm_device_init();
msm_pm_register_cpr_ops();
} else {
msm_pm_set_platform_data(msm7x27a_pm_data,
ARRAY_SIZE(msm7x27a_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
}
msm_pm_register_irqs();
}
static void __init msm8625_rumi3_init(void)
{
msm7x2x_misc_init();
msm_adsp_add_pdev();
msm8625_device_i2c_init();
platform_add_devices(msm8625_rumi3_devices,
ARRAY_SIZE(msm8625_rumi3_devices));
msm_pm_set_platform_data(msm8625_pm_data,
ARRAY_SIZE(msm8625_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_8625_boot_pdata));
msm8x25_spm_device_init();
}
static void __init halibut_init(void)
{
if (socinfo_init() < 0)
BUG();
if (machine_is_msm7201a_ffa()) {
smc91x_resources[0].start = 0x98000300;
smc91x_resources[0].end = 0x98000400;
smc91x_resources[1].start = MSM_GPIO_TO_INT(85);
smc91x_resources[1].end = MSM_GPIO_TO_INT(85);
}
/* All 7x01 2.0 based boards are expected to have RAM chips capable
* of 160 MHz. */
if (cpu_is_msm7x01()
&& SOCINFO_VERSION_MAJOR(socinfo_get_version()) == 2)
halibut_clock_data.max_axi_khz = 160000;
#if defined(CONFIG_MSM_SERIAL_DEBUGGER)
msm_serial_debug_init(MSM_UART3_PHYS, INT_UART3,
&msm_device_uart3.dev, 1);
#endif
msm_hsusb_pdata.soc_version = socinfo_get_version();
msm_acpu_clock_init(&halibut_clock_data);
msm_device_hsusb_peripheral.dev.platform_data = &msm_hsusb_pdata,
msm_device_hsusb_host.dev.platform_data = &msm_hsusb_pdata,
platform_add_devices(devices, ARRAY_SIZE(devices));
msm_camera_add_device();
msm_device_i2c_init();
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
#ifdef CONFIG_SURF_FFA_GPIO_KEYPAD
if (machine_is_msm7201a_ffa())
platform_device_register(&keypad_device_7k_ffa);
else
platform_device_register(&keypad_device_surf);
#endif
halibut_init_mmc();
#ifdef CONFIG_USB_FUNCTION
hsusb_gpio_init();
#endif
msm_fb_add_devices();
bt_power_init();
#ifdef CONFIG_USB_ANDROID
msm_hsusb_rpc_connect();
msm_hsusb_set_vbus_state(1) ;
#endif
msm_pm_set_platform_data(msm_pm_data);
}
static void __init msm_qrd1_init(void)
{
msm7x2x_misc_init();
msm7627a_init_regulators();
msm_device_i2c_init();
#ifdef CONFIG_SERIAL_MSM_HS
msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif
#ifdef CONFIG_USB_MSM_OTG_72K
msm_otg_pdata.swfi_latency = msm7627a_pm_data
[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
msm_device_otg.dev.platform_data = &msm_otg_pdata;
#endif
msm_device_gadget_peripheral.dev.platform_data =
&msm_gadget_pdata;
platform_add_devices(qrd1_devices,
ARRAY_SIZE(qrd1_devices));
msm7627a_init_mmc();
#ifdef CONFIG_USB_EHCI_MSM_72K
msm7627a_init_host();
#endif
msm_pm_set_platform_data(msm7627a_pm_data,
ARRAY_SIZE(msm7627a_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
msm_fb_add_devices();
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm7627a_bt_power_init();
#endif
msm7627a_camera_init();
#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C) || \
defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C_MODULE)
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
synaptic_i2c_clearpad3k,
ARRAY_SIZE(synaptic_i2c_clearpad3k));
#endif
platform_device_register(&hs_pdev);
#ifdef CONFIG_MSM_RPC_VIBRATOR
msm_init_pmic_vibrator();
#endif
}
void __init lge_add_usb_devices(void)
{
#ifdef CONFIG_USB_MSM_OTG_72K
msm_otg_pdata.swfi_latency =
msm7x27a_pm_data
[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
msm_device_otg.dev.platform_data = &msm_otg_pdata;
#endif
platform_add_devices(m3eu_usb_devices, ARRAY_SIZE(m3eu_usb_devices));
#ifdef CONFIG_USB_EHCI_MSM_72K
msm7x2x_init_host();
#endif
msm_pm_set_platform_data(msm7x27a_pm_data,
ARRAY_SIZE(msm7x27a_pm_data));
}
static void __init msm9615_common_init(void)
{
msm9615_device_init();
gpiomux_init();
msm9615_i2c_init();
regulator_suppress_info_printing();
msm9615_device_qup_spi_gsbi3.dev.platform_data =
&msm9615_qup_spi_gsbi3_pdata;
msm9615_device_ssbi_pmic1.dev.platform_data =
&msm9615_ssbi_pm8018_pdata;
pm8018_platform_data.num_regulators = msm_pm8018_regulator_pdata_len;
msm_device_otg.dev.platform_data = &msm_otg_pdata;
msm_device_gadget_peripheral.dev.parent = &msm_device_otg.dev;
platform_add_devices(common_devices, ARRAY_SIZE(common_devices));
msm9615_init_mmc();
msm_pm_set_platform_data(msm_pm_data, ARRAY_SIZE(msm_pm_data));
msm_pm_set_rpm_wakeup_irq(RPM_APCC_CPU0_WAKE_UP_IRQ);
msm_cpuidle_set_states(msm_cstates, ARRAY_SIZE(msm_cstates),
msm_pm_data);
}
static void __init msm7x2x_init(void)
{
msm7x2x_misc_init();
/* Initialize regulators first so that other devices can use them */
msm7x27a_init_regulators();
/* Common functions for SURF/FFA/RUMI3 */
msm_device_i2c_init();
msm7x27a_init_ebi2();
msm7x27a_cfg_uart2dm_serial();
#ifdef CONFIG_SERIAL_MSM_HS
msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif
#ifdef CONFIG_USB_MSM_OTG_72K
msm_otg_pdata.swfi_latency =
msm7x27a_pm_data
[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
msm_device_otg.dev.platform_data = &msm_otg_pdata;
#endif
msm_device_gadget_peripheral.dev.platform_data =
&msm_gadget_pdata;
msm7x27a_cfg_smsc911x();
platform_add_devices(msm_footswitch_devices,
msm_num_footswitch_devices);
platform_add_devices(surf_ffa_devices,
ARRAY_SIZE(surf_ffa_devices));
/* Ensure ar6000pm device is registered before MMC/SDC */
msm7x27a_init_ar6000pm();
#ifdef CONFIG_MMC_MSM
msm7627a_init_mmc();
#endif
msm_fb_add_devices();
#ifdef CONFIG_USB_EHCI_MSM_72K
msm7x2x_init_host();
#endif
msm_pm_set_platform_data(msm7x27a_pm_data,
ARRAY_SIZE(msm7x27a_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
register_i2c_devices();
#endif
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm7627a_bt_power_init();
#endif
if (machine_is_msm7625a_surf() || machine_is_msm7625a_ffa()) {
atmel_ts_pdata.min_x = 0;
atmel_ts_pdata.max_x = 480;
atmel_ts_pdata.min_y = 0;
atmel_ts_pdata.max_y = 320;
}
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
atmel_ts_i2c_info,
ARRAY_SIZE(atmel_ts_i2c_info));
#if defined(CONFIG_MSM_CAMERA)
msm7627a_camera_init();
#endif
platform_device_register(&kp_pdev);
platform_device_register(&hs_pdev);
/* configure it as a pdm function*/
if (gpio_tlmm_config(GPIO_CFG(LED_GPIO_PDM, 3,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_8MA), GPIO_CFG_ENABLE))
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, LED_GPIO_PDM);
else
platform_device_register(&led_pdev);
#ifdef CONFIG_MSM_RPC_VIBRATOR
if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
msm_init_pmic_vibrator();
#endif
/*7x25a kgsl initializations*/
msm7x25a_kgsl_3d0_init();
}
static void __init msm7x2x_init(void)
{
if (socinfo_init() < 0)
BUG();
#ifdef CONFIG_HUAWEI_CAMERA
sensor_vreg_disable(sensor_vreg_array,ARRAY_SIZE(sensor_vreg_array));
#endif
#if defined(CONFIG_MSM_SERIAL_DEBUGGER)
msm_serial_debug_init(MSM_UART3_PHYS, INT_UART3,
&msm_device_uart3.dev, 1);
#endif
/*delete*/
msm_acpu_clock_init(&msm7x2x_clock_data);
msm_hsusb_pdata.swfi_latency =
msm7x25_pm_data
[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
if(machine_is_msm7x25_u8110()) {
msm_device_hsusb_peripheral.dev.platform_data = &msm_hsusb_tmo_pdata;
} else {
msm_device_hsusb_peripheral.dev.platform_data = &msm_hsusb_pdata;
}
if(machine_is_msm7x25_u8110()) {
mass_storage_device.dev.platform_data = &usb_mass_storage_tmo_pdata;
}
platform_add_devices(devices, ARRAY_SIZE(devices));
#ifdef CONFIG_MSM_CAMERA
config_camera_off_gpios(); /* might not be necessary */
#endif
msm_device_i2c_init();
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
#ifdef CONFIG_SURF_FFA_GPIO_KEYPAD
if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa())
platform_device_register(&keypad_device_7k_ffa);
else
platform_device_register(&keypad_device_surf);
#endif
#ifdef CONFIG_HUAWEI_GPIO_KEYPAD
if (machine_is_msm7x25_c8600())
platform_device_register(&keypad_device_c8600);
else if (machine_is_msm7x25_u8110()) //machine_is_msm7x25_u8100()
platform_device_register(&keypad_device_u8100);
else if (machine_is_msm7x25_u7610())
platform_device_register(&keypad_device_u7610);
else
platform_device_register(&keypad_device_c8600); //default use c6800 keypad
#endif
lcdc_gpio_init();
#ifdef CONFIG_HUAWEI_JOGBALL
//config_jogball_gpios();
//init_jogball();
if (machine_is_msm7x25_c8600())
platform_device_register(&jogball_device);
#endif
msm_fb_add_devices();
msm7x2x_init_mmc();
bt_power_init();
msm_pm_set_platform_data(msm7x25_pm_data);
#ifdef CONFIG_HUAWEI_MSM_VIBRATOR
msm_init_pmic_vibrator();
#endif
}
static void __init msm7x27_init(void)
{
if (socinfo_init() < 0)
BUG();
#if defined(CONFIG_MSM_SERIAL_DEBUGGER)
msm_serial_debug_init(MSM_UART3_PHYS, INT_UART3,
&msm_device_uart3.dev, 1);
#endif
if (machine_is_msm7x27_ffa()) {
smc91x_resources[0].start = 0x98000300;
smc91x_resources[0].end = 0x980003ff;
smc91x_resources[1].start = MSM_GPIO_TO_INT(85);
smc91x_resources[1].end = MSM_GPIO_TO_INT(85);
if (gpio_tlmm_config(GPIO_CFG(85, 0,
GPIO_INPUT,
GPIO_PULL_DOWN,
GPIO_2MA),
GPIO_ENABLE)) {
printk(KERN_ERR
"%s: Err: Config GPIO-85 INT\n",
__func__);
}
msm7x27_clock_data.max_axi_khz = 160000;
}
if (cpu_is_msm7x27())
msm7x27_clock_data.max_axi_khz = 200000;
msm_acpu_clock_init(&msm7x27_clock_data);
/* This value has been set to 160000 for power savings. */
/* OEMs may modify the value at their discretion for performance */
/* The appropriate maximum replacement for 160000 is: */
/* clk_get_max_axi_khz() */
kgsl_pdata.max_axi_freq = 160000;
msm_hsusb_pdata.swfi_latency =
msm7x27_pm_data
[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
msm_device_hsusb_peripheral.dev.platform_data = &msm_hsusb_pdata;
msm_device_otg.dev.platform_data = &msm_otg_pdata;
msm_device_gadget_peripheral.dev.platform_data = &msm_gadget_pdata;
msm_device_hsusb_host.dev.platform_data = &msm_hsusb_pdata;
platform_add_devices(devices, ARRAY_SIZE(devices));
#ifdef CONFIG_MSM_CAMERA
config_camera_off_gpios(); /* might not be necessary */
#endif
msm_device_i2c_init();
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
#ifdef CONFIG_SURF_FFA_GPIO_KEYPAD
if (machine_is_msm7x27_ffa())
platform_device_register(&keypad_device_7k_ffa);
else
platform_device_register(&keypad_device_surf);
#endif
lcdc_gordon_gpio_init();
msm_fb_add_devices();
msm7x27_init_mmc();
bt_power_init();
if (cpu_is_msm7x27())
msm_pm_set_platform_data(msm7x27_pm_data);
else
msm_pm_set_platform_data(msm7x27_pm_data);
}
static void __init msm7x2x_init(void)
{
if (socinfo_init() < 0)
BUG();
msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);
#if defined(CONFIG_MSM_SERIAL_DEBUGGER)
msm_serial_debug_init(MSM_UART3_PHYS, INT_UART3,
&msm_device_uart3.dev, 1);
#endif
if (cpu_is_msm7x27())
msm7x2x_clock_data.max_axi_khz = 200000;
msm_acpu_clock_init(&msm7x2x_clock_data);
msm_add_pmem_devices();
msm_add_fb_device();
#if !defined(CONFIG_MSM_SERIAL_DEBUGGER)
if (lge_get_uart_mode())
platform_device_register(&msm_device_uart3);
#endif
platform_add_devices(devices, ARRAY_SIZE(devices));
#ifdef CONFIG_ARCH_MSM7X27
msm_add_kgsl_device();
#endif
msm_add_usb_devices();
#ifdef CONFIG_MSM_CAMERA
config_camera_off_gpios(); /* might not be necessary */
#endif
msm_device_i2c_init();
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
if (cpu_is_msm7x27())
msm_pm_set_platform_data(msm7x27_pm_data,
ARRAY_SIZE(msm7x27_pm_data));
else
msm_pm_set_platform_data(msm7x25_pm_data,
ARRAY_SIZE(msm7x25_pm_data));
msm7x27_wlan_init();
swift_init_gpio_i2c_devices();
#ifdef CONFIG_ANDROID_RAM_CONSOLE
lge_add_ramconsole_devices();
lge_add_ers_devices();
lge_add_panic_handler_devices();
#endif
lge_add_camera_devices();
lge_add_lcd_devices();
lge_add_btpower_devices();
lge_add_mmc_devices();
lge_add_input_devices();
lge_add_misc_devices();
lge_add_pm_devices();
/* gpio i2c devices should be registered at latest point */
lge_add_gpio_i2c_devices();
/* initialize timed_output vibrator */
swift_init_timed_vibrator();
}
