void annexCode(void)
{
int32_t throttleValue;
// Compute ROLL PITCH and YAW command
rcCommand[ROLL] = getAxisRcCommand(rcData[ROLL], currentControlRateProfile->rcExpo8, currentProfile->rcControlsConfig.deadband);
rcCommand[PITCH] = getAxisRcCommand(rcData[PITCH], currentControlRateProfile->rcExpo8, currentProfile->rcControlsConfig.deadband);
rcCommand[YAW] = -getAxisRcCommand(rcData[YAW], currentControlRateProfile->rcYawExpo8, currentProfile->rcControlsConfig.yaw_deadband);
//Compute THROTTLE command
throttleValue = constrain(rcData[THROTTLE], masterConfig.rxConfig.mincheck, PWM_RANGE_MAX);
throttleValue = (uint32_t)(throttleValue - masterConfig.rxConfig.mincheck) * PWM_RANGE_MIN / (PWM_RANGE_MAX - masterConfig.rxConfig.mincheck); // [MINCHECK;2000] -> [0;1000]
rcCommand[THROTTLE] = rcLookupThrottle(throttleValue);
if (FLIGHT_MODE(HEADFREE_MODE)) {
const float radDiff = degreesToRadians(DECIDEGREES_TO_DEGREES(attitude.values.yaw) - headFreeModeHold);
const float cosDiff = cos_approx(radDiff);
const float sinDiff = sin_approx(radDiff);
const int16_t rcCommand_PITCH = rcCommand[PITCH] * cosDiff + rcCommand[ROLL] * sinDiff;
rcCommand[ROLL] = rcCommand[ROLL] * cosDiff - rcCommand[PITCH] * sinDiff;
rcCommand[PITCH] = rcCommand_PITCH;
}
if (ARMING_FLAG(ARMED)) {
LED0_ON;
} else {
if (IS_RC_MODE_ACTIVE(BOXARM) == 0) {
ENABLE_ARMING_FLAG(OK_TO_ARM);
}
if (!STATE(SMALL_ANGLE)) {
DISABLE_ARMING_FLAG(OK_TO_ARM);
}
if (isCalibrating() || isSystemOverloaded()) {
warningLedFlash();
DISABLE_ARMING_FLAG(OK_TO_ARM);
}
#if defined(NAV)
if (naivationBlockArming()) {
DISABLE_ARMING_FLAG(OK_TO_ARM);
}
#endif
if (ARMING_FLAG(OK_TO_ARM)) {
warningLedDisable();
} else {
warningLedFlash();
}
warningLedUpdate();
}
// Read out gyro temperature. can use it for something somewhere. maybe get MCU temperature instead? lots of fun possibilities.
if (gyro.temperature)
gyro.temperature(&telemTemperature1);
}
void annexCode(void)
{
int32_t tmp;
for (int axis = 0; axis < 3; axis++) {
tmp = MIN(ABS(rcData[axis] - masterConfig.rxConfig.midrc), 500);
if (axis == ROLL || axis == PITCH) {
if (currentProfile->rcControlsConfig.deadband) {
if (tmp > currentProfile->rcControlsConfig.deadband) {
tmp -= currentProfile->rcControlsConfig.deadband;
} else {
tmp = 0;
}
}
rcCommand[axis] = rcLookupPitchRoll(tmp);
} else if (axis == YAW) {
if (currentProfile->rcControlsConfig.yaw_deadband) {
if (tmp > currentProfile->rcControlsConfig.yaw_deadband) {
tmp -= currentProfile->rcControlsConfig.yaw_deadband;
} else {
tmp = 0;
}
}
rcCommand[axis] = rcLookupYaw(tmp) * -1;
}
if (rcData[axis] < masterConfig.rxConfig.midrc) {
rcCommand[axis] = -rcCommand[axis];
}
}
tmp = constrain(rcData[THROTTLE], masterConfig.rxConfig.mincheck, PWM_RANGE_MAX);
tmp = (uint32_t)(tmp - masterConfig.rxConfig.mincheck) * PWM_RANGE_MIN / (PWM_RANGE_MAX - masterConfig.rxConfig.mincheck); // [MINCHECK;2000] -> [0;1000]
rcCommand[THROTTLE] = rcLookupThrottle(tmp);
if (FLIGHT_MODE(HEADFREE_MODE)) {
const float radDiff = degreesToRadians(DECIDEGREES_TO_DEGREES(attitude.values.yaw) - headFreeModeHold);
const float cosDiff = cos_approx(radDiff);
const float sinDiff = sin_approx(radDiff);
const int16_t rcCommand_PITCH = rcCommand[PITCH] * cosDiff + rcCommand[ROLL] * sinDiff;
rcCommand[ROLL] = rcCommand[ROLL] * cosDiff - rcCommand[PITCH] * sinDiff;
rcCommand[PITCH] = rcCommand_PITCH;
}
if (ARMING_FLAG(ARMED)) {
LED0_ON;
} else {
if (IS_RC_MODE_ACTIVE(BOXARM) == 0) {
ENABLE_ARMING_FLAG(OK_TO_ARM);
}
if (!STATE(SMALL_ANGLE)) {
DISABLE_ARMING_FLAG(OK_TO_ARM);
}
if (isCalibrating() || isSystemOverloaded()) {
warningLedFlash();
DISABLE_ARMING_FLAG(OK_TO_ARM);
}
#if defined(NAV)
if (naivationBlockArming()) {
DISABLE_ARMING_FLAG(OK_TO_ARM);
}
#endif
if (ARMING_FLAG(OK_TO_ARM)) {
warningLedDisable();
} else {
warningLedFlash();
}
warningLedUpdate();
}
// Read out gyro temperature. can use it for something somewhere. maybe get MCU temperature instead? lots of fun possibilities.
if (gyro.temperature)
gyro.temperature(&telemTemperature1);
}
