void on_nble_gap_connect_evt(const struct nble_gap_connect_evt *ev)
{
struct bt_conn *conn;
BT_DBG("handle %u role %u", ev->conn_handle, ev->role_slave);
conn = conn_get(&ev->peer_bda);
if (!conn) {
BT_ERR("Unable to get bt_conn object");
return;
}
conn->handle = ev->conn_handle;
conn->role = ev->role_slave ? BT_CONN_ROLE_SLAVE : BT_CONN_ROLE_MASTER;
conn->interval = ev->conn_values.interval;
conn->latency = ev->conn_values.latency;
conn->timeout = ev->conn_values.supervision_to;
bt_addr_le_copy(&conn->dst, &ev->peer_bda);
k_delayed_work_init(&conn->update_work, le_conn_update);
conn->state = BT_CONN_CONNECTED;
notify_connected(conn);
/*
* Core 4.2 Vol 3, Part C, 9.3.12.2
* The Peripheral device should not perform a Connection Parameter
* Update procedure within 5 s after establishing a connection.
*/
k_delayed_work_submit(&conn->update_work,
conn->role == BT_HCI_ROLE_MASTER ? K_NO_WAIT :
CONN_UPDATE_TIMEOUT);
}
void Session::on_event(const SessionEvent& event) {
switch (event.type) {
case SessionEvent::CONNECT: {
int port = config_.port();
const Config::ContactPointList& contact_points = config_.contact_points();
for (Config::ContactPointList::const_iterator it = contact_points.begin(),
end = contact_points.end();
it != end; ++it) {
const std::string& seed = *it;
Address address;
if (Address::from_string(seed, port, &address)) {
add_host(address);
} else {
pending_resolve_count_++;
Resolver::resolve(loop(), seed, port, this, on_resolve);
}
}
if (pending_resolve_count_ == 0) {
internal_connect();
}
break;
}
case SessionEvent::NOTIFY_READY:
if (pending_pool_count_ > 0) {
if (--pending_pool_count_ == 0) {
LOG_DEBUG("Session is connected");
notify_connected();
}
LOG_DEBUG("Session pending pool count %d", pending_pool_count_);
}
break;
case SessionEvent::NOTIFY_WORKER_CLOSED:
if (--pending_workers_count_ == 0) {
LOG_DEBUG("Session is disconnected");
control_connection_.close();
close_handles();
}
break;
case SessionEvent::NOTIFY_UP:
control_connection_.on_up(event.address);
break;
case SessionEvent::NOTIFY_DOWN:
control_connection_.on_down(event.address);
break;
default:
assert(false);
break;
}
}
void on_nble_gap_connect_evt(const struct nble_gap_connect_evt *ev)
{
struct bt_conn *conn;
BT_DBG("handle %u role %u", ev->conn_handle, ev->role_slave);
conn = conn_new();
if (!conn) {
BT_ERR("Unable to create new bt_conn object");
return;
}
conn->handle = ev->conn_handle;
conn->role = ev->role_slave;
conn->interval = ev->conn_values.interval;
conn->latency = ev->conn_values.latency;
conn->timeout = ev->conn_values.supervision_to;
bt_addr_le_copy(&conn->dst, &ev->peer_bda);
conn->state = BT_CONN_CONNECTED;
notify_connected(conn);
}
void Session::on_event(const SessionEvent& event) {
switch (event.type) {
case SessionEvent::CONNECT: {
int port = config_.port();
const ContactPointList& contact_points = config_.contact_points();
for (ContactPointList::const_iterator it = contact_points.begin(),
end = contact_points.end();
it != end; ++it) {
const std::string& seed = *it;
Address address;
if (Address::from_string(seed, port, &address)) {
add_host(address);
} else {
pending_resolve_count_++;
Resolver::resolve(loop(), seed, port, this, on_resolve);
}
}
if (pending_resolve_count_ == 0) {
internal_connect();
}
break;
}
case SessionEvent::NOTIFY_READY:
if (pending_pool_count_ > 0) {
if (--pending_pool_count_ == 0) {
LOG_DEBUG("Session is connected");
notify_connected();
}
LOG_DEBUG("Session pending pool count %d", pending_pool_count_);
}
break;
case SessionEvent::NOTIFY_KEYSPACE_ERROR: {
// Currently, this is only called when the keyspace does not exist
// and not for any other keyspace related errors.
const CopyOnWritePtr<std::string> keyspace(keyspace_);
notify_connect_error(CASS_ERROR_LIB_UNABLE_TO_SET_KEYSPACE,
"Keyspace '" + *keyspace + "' does not exist");
break;
}
case SessionEvent::NOTIFY_WORKER_CLOSED:
if (--pending_workers_count_ == 0) {
LOG_DEBUG("Session is disconnected");
control_connection_.close();
close_handles();
}
break;
case SessionEvent::NOTIFY_UP:
control_connection_.on_up(event.address);
break;
case SessionEvent::NOTIFY_DOWN:
control_connection_.on_down(event.address);
break;
default:
assert(false);
break;
}
}
void bt_conn_set_state(struct bt_conn *conn, bt_conn_state_t state)
{
bt_conn_state_t old_state;
BT_DBG("%s -> %s", state2str(conn->state), state2str(state));
if (conn->state == state) {
BT_WARN("no transition");
return;
}
old_state = conn->state;
conn->state = state;
/* Actions needed for exiting the old state */
switch (old_state) {
case BT_CONN_DISCONNECTED:
/* Take a reference for the first state transition after
* bt_conn_add_le() and keep it until reaching DISCONNECTED
* again.
*/
bt_conn_ref(conn);
break;
case BT_CONN_CONNECT:
if (conn->timeout) {
fiber_delayed_start_cancel(conn->timeout);
conn->timeout = NULL;
/* Drop the reference taken by timeout fiber */
bt_conn_unref(conn);
}
break;
default:
break;
}
/* Actions needed for entering the new state */
switch (conn->state) {
case BT_CONN_CONNECTED:
nano_fifo_init(&conn->tx_queue);
fiber_start(conn->stack, sizeof(conn->stack), conn_tx_fiber,
(int)bt_conn_ref(conn), 0, 7, 0);
bt_l2cap_connected(conn);
notify_connected(conn);
break;
case BT_CONN_DISCONNECTED:
/* Notify disconnection and queue a dummy buffer to wake
* up and stop the tx fiber for states where it was
* running.
*/
if (old_state == BT_CONN_CONNECTED ||
old_state == BT_CONN_DISCONNECT) {
bt_l2cap_disconnected(conn);
notify_disconnected(conn);
nano_fifo_put(&conn->tx_queue, net_buf_get(&dummy, 0));
} else if (old_state == BT_CONN_CONNECT) {
/* conn->err will be set in this case */
notify_connected(conn);
} else if (old_state == BT_CONN_CONNECT_SCAN && conn->err) {
/* this indicate LE Create Connection failed */
notify_connected(conn);
}
/* Release the reference we took for the very first
* state transition.
*/
bt_conn_unref(conn);
break;
case BT_CONN_CONNECT_SCAN:
break;
case BT_CONN_CONNECT:
/*
* Timer is needed only for LE. For other link types controller
* will handle connection timeout.
*/
if (conn->type != BT_CONN_TYPE_LE) {
break;
}
/* Add LE Create Connection timeout */
conn->timeout = fiber_delayed_start(conn->stack,
sizeof(conn->stack),
timeout_fiber,
(int)bt_conn_ref(conn),
0, 7, 0, CONN_TIMEOUT);
break;
case BT_CONN_DISCONNECT:
break;
default:
BT_WARN("no valid (%u) state was set", state);
break;
}
}
void Session::on_event(const SessionEvent& event) {
switch (event.type) {
case SessionEvent::CONNECT: {
int port = config_.port();
// This needs to be done on the session thread because it could pause
// generating a new random seed.
if (config_.use_randomized_contact_points()) {
random_.reset(new Random());
}
MultiResolver<Session*>::Ptr resolver(
new MultiResolver<Session*>(this, on_resolve,
#if UV_VERSION_MAJOR >= 1
on_resolve_name,
#endif
on_resolve_done));
const ContactPointList& contact_points = config_.contact_points();
for (ContactPointList::const_iterator it = contact_points.begin(),
end = contact_points.end();
it != end; ++it) {
const std::string& seed = *it;
Address address;
if (Address::from_string(seed, port, &address)) {
#if UV_VERSION_MAJOR >= 1
if (config_.use_hostname_resolution()) {
resolver->resolve_name(loop(), address, config_.resolve_timeout_ms());
} else {
#endif
add_host(address);
#if UV_VERSION_MAJOR >= 1
}
#endif
} else {
resolver->resolve(loop(), seed, port, config_.resolve_timeout_ms());
}
}
break;
}
case SessionEvent::NOTIFY_READY:
if (pending_pool_count_ > 0) {
if (--pending_pool_count_ == 0) {
LOG_DEBUG("Session is connected");
notify_connected();
}
LOG_DEBUG("Session pending pool count %d", pending_pool_count_);
}
break;
case SessionEvent::NOTIFY_KEYSPACE_ERROR: {
// Currently, this is only called when the keyspace does not exist
// and not for any other keyspace related errors.
notify_connect_error(CASS_ERROR_LIB_UNABLE_TO_SET_KEYSPACE,
"Keyspace '" + keyspace() + "' does not exist");
break;
}
case SessionEvent::NOTIFY_WORKER_CLOSED:
if (--pending_workers_count_ == 0) {
LOG_DEBUG("Session is disconnected");
control_connection_.close();
close_handles();
}
break;
case SessionEvent::NOTIFY_UP:
control_connection_.on_up(event.address);
break;
case SessionEvent::NOTIFY_DOWN:
control_connection_.on_down(event.address);
break;
default:
assert(false);
break;
}
}
