int trv_servertask(int argc, char *argv[])
{
FAR struct fb_vtable_s *fbdev;
int ret;
/* Get the framebuffer device */
fbdev = trv_get_fbdev();
/* Then start the server */
ret = nx_run(dev);
trv_abort("nx_run returned: %d\n", errno);
}
int nxcon_server(int argc, char *argv[])
{
FAR NX_DRIVERTYPE *dev;
int ret;
#if defined(CONFIG_EXAMPLES_NXCON_EXTERNINIT)
/* Use external graphics driver initialization */
message("nxcon_server: Initializing external graphics device\n");
dev = up_nxdrvinit(CONFIG_EXAMPLES_NXCON_DEVNO);
if (!dev)
{
message("nxcon_server: up_nxdrvinit failed, devno=%d\n", CONFIG_EXAMPLES_NXCON_DEVNO);
return ERROR;
}
#elif defined(CONFIG_NX_LCDDRIVER)
/* Initialize the LCD device */
message("nxcon_server: Initializing LCD\n");
ret = up_lcdinitialize();
if (ret < 0)
{
message("nxcon_server: up_lcdinitialize failed: %d\n", -ret);
return 1;
}
/* Get the device instance */
dev = up_lcdgetdev(CONFIG_EXAMPLES_NXCON_DEVNO);
if (!dev)
{
message("nxcon_server: up_lcdgetdev failed, devno=%d\n", CONFIG_EXAMPLES_NXCON_DEVNO);
return 2;
}
/* Turn the LCD on at 75% power */
(void)dev->setpower(dev, ((3*CONFIG_LCD_MAXPOWER + 3)/4));
#else
/* Initialize the frame buffer device */
message("nxcon_server: Initializing framebuffer\n");
ret = up_fbinitialize();
if (ret < 0)
{
message("nxcon_server: up_fbinitialize failed: %d\n", -ret);
return 1;
}
dev = up_fbgetvplane(CONFIG_EXAMPLES_NXCON_VPLANE);
if (!dev)
{
message("nxcon_server: up_fbgetvplane failed, vplane=%d\n", CONFIG_EXAMPLES_NXCON_VPLANE);
return 2;
}
#endif
/* Then start the server */
ret = nx_run(dev);
gvdbg("nx_run returned: %d\n", errno);
return 3;
}
int nx_servertask(int argc, char *argv[])
{
FAR NX_DRIVERTYPE *dev;
int ret;
#if defined(CONFIG_EXAMPLES_NX_EXTERNINIT)
/* Use external graphics driver initialization */
printf("nxeg_initialize: Initializing external graphics device\n");
dev = boardctl(BOARDIOC_GRAPHICS_SETUP, CONFIG_EXAMPLES_NX_DEVNO);
if (!dev)
{
printf("nxeg_initialize: boardctl failed, devno=%d\n",
CONFIG_EXAMPLES_NX_DEVNO);
g_exitcode = NXEXIT_EXTINITIALIZE;
return ERROR;
}
#elif defined(CONFIG_NX_LCDDRIVER)
/* Initialize the LCD device */
printf("nx_servertask: Initializing LCD\n");
ret = board_lcd_initialize();
if (ret < 0)
{
printf("nx_servertask: board_lcd_initialize failed: %d\n", -ret);
return 1;
}
/* Get the device instance */
dev = board_lcd_getdev(CONFIG_EXAMPLES_NX_DEVNO);
if (!dev)
{
printf("nx_servertask: board_lcd_getdev failed, devno=%d\n",
CONFIG_EXAMPLES_NX_DEVNO);
return 2;
}
/* Turn the LCD on at 75% power */
(void)dev->setpower(dev, ((3*CONFIG_LCD_MAXPOWER + 3)/4));
#else
/* Initialize the frame buffer device */
printf("nx_servertask: Initializing framebuffer\n");
ret = up_fbinitialize();
if (ret < 0)
{
printf("nx_servertask: up_fbinitialize failed: %d\n", -ret);
return 1;
}
dev = up_fbgetvplane(CONFIG_EXAMPLES_NX_VPLANE);
if (!dev)
{
printf("nx_servertask: up_fbgetvplane failed, vplane=%d\n", CONFIG_EXAMPLES_NX_VPLANE);
return 2;
}
#endif
/* Then start the server */
ret = nx_run(dev);
printf("nx_servertask: nx_run returned: %d\n", errno);
return 3;
}
int nx_server(int argc, char *argv[])
{
FAR NX_DRIVERTYPE *dev;
int ret;
#if defined(CONFIG_NXSTART_EXTERNINIT)
/* Use external graphics driver initialization */
dev = up_nxdrvinit(CONFIG_NXSTART_DEVNO);
if (!dev)
{
gdbg("ERROR: up_nxdrvinit failed, devno=%d\n", CONFIG_NXSTART_DEVNO);
return EXIT_FAILURE;
}
#elif defined(CONFIG_NX_LCDDRIVER)
/* Initialize the LCD device */
ret = up_lcdinitialize();
if (ret < 0)
{
gdbg("ERROR: up_lcdinitialize failed: %d\n", ret);
return EXIT_FAILURE;
}
/* Get the device instance */
dev = up_lcdgetdev(CONFIG_NXSTART_DEVNO);
if (!dev)
{
gdbg("ERROR: up_lcdgetdev failed, devno=%d\n", CONFIG_NXSTART_DEVNO);
return EXIT_FAILURE;
}
/* Turn the LCD on at 75% power */
(void)dev->setpower(dev, ((3*CONFIG_LCD_MAXPOWER + 3)/4));
#else /* CONFIG_NX_LCDDRIVER */
/* Initialize the frame buffer device */
ret = up_fbinitialize();
if (ret < 0)
{
gdbg("ERROR: up_fbinitialize failed: %d\n", ret);
return EXIT_FAILURE;
}
dev = up_fbgetvplane(CONFIG_NXSTART_VPLANE);
if (!dev)
{
gdbg("ERROR: up_fbgetvplane failed, vplane=%d\n", CONFIG_NXSTART_VPLANE);
return EXIT_FAILURE;
}
#endif /* CONFIG_NX_LCDDRIVER */
/* Then start the server (nx_run does not normally return) */
ret = nx_run(dev);
gvdbg("nx_run returned: %d\n", ret);
return EXIT_FAILURE;
}
int nxterm_server(int argc, char *argv[])
{
FAR NX_DRIVERTYPE *dev;
int ret;
#if defined(CONFIG_EXAMPLES_NXTERM_EXTERNINIT)
struct boardioc_graphics_s devinfo;
int ret;
/* Use external graphics driver initialization */
printf("nxterm_server: Initializing external graphics device\n");
devinfo.devno = CONFIG_EXAMPLES_NXTERM_DEVNO;
devinfo.dev = NULL;
ret = boardctl(BOARDIOC_GRAPHICS_SETUP, (uintptr_t)&devinfo);
if (ret < 0)
{
printf("nxterm_server: boardctl failed, devno=%d: %d\n",
CONFIG_EXAMPLES_NXTERM_DEVNO, errno);
return ERROR;
}
dev = devinfo.dev;
#elif defined(CONFIG_NX_LCDDRIVER)
/* Initialize the LCD device */
printf("nxterm_server: Initializing LCD\n");
ret = board_lcd_initialize();
if (ret < 0)
{
printf("nxterm_server: board_lcd_initialize failed: %d\n", -ret);
return 1;
}
/* Get the device instance */
dev = board_lcd_getdev(CONFIG_EXAMPLES_NXTERM_DEVNO);
if (!dev)
{
printf("nxterm_server: board_lcd_getdev failed, devno=%d\n",
CONFIG_EXAMPLES_NXTERM_DEVNO);
return 2;
}
/* Turn the LCD on at 75% power */
(void)dev->setpower(dev, ((3*CONFIG_LCD_MAXPOWER + 3)/4));
#else
/* Initialize the frame buffer device */
printf("nxterm_server: Initializing framebuffer\n");
ret = up_fbinitialize(0);
if (ret < 0)
{
printf("nxterm_server: up_fbinitialize failed: %d\n", -ret);
return 1;
}
dev = up_fbgetvplane(0, CONFIG_EXAMPLES_NXTERM_VPLANE);
if (!dev)
{
printf("nxterm_server: up_fbgetvplane failed, vplane=%d\n",
CONFIG_EXAMPLES_NXTERM_VPLANE);
return 2;
}
#endif
/* Then start the server */
ret = nx_run(dev);
gvdbg("nx_run returned: %d\n", errno);
return 3;
}