void EDA_DRAW_FRAME::RefreshCrossHair( const wxPoint &aOldPos,
const wxPoint &aEvtPos,
wxDC* aDC )
{
wxPoint newpos = GetCrossHairPosition();
// Redraw the crosshair if it moved
if( aOldPos != newpos )
{
SetCrossHairPosition( aOldPos, false );
m_canvas->CrossHairOff( aDC );
SetCrossHairPosition( newpos, false );
m_canvas->CrossHairOn( aDC );
if( m_canvas->IsMouseCaptured() )
{
#ifdef USE_WX_OVERLAY
wxDCOverlay oDC( m_overlay, (wxWindowDC*)aDC );
oDC.Clear();
m_canvas->CallMouseCapture( aDC, aEvtPos, false );
#else
m_canvas->CallMouseCapture( aDC, aEvtPos, true );
#endif
}
#ifdef USE_WX_OVERLAY
else
{
m_overlay.Reset();
}
#endif
}
}
void PCB_EDIT_FRAME::GeneralControl( wxDC* aDC, const wxPoint& aPosition, int aHotKey )
{
wxRealPoint gridSize;
wxPoint oldpos;
wxPoint pos = aPosition;
// when moving mouse, use the "magnetic" grid, unless the shift+ctrl keys is pressed
// for next cursor position
// ( shift or ctrl key down are PAN command with mouse wheel)
bool snapToGrid = true;
if( !aHotKey && wxGetKeyState( WXK_SHIFT ) && wxGetKeyState( WXK_CONTROL ) )
snapToGrid = false;
if( snapToGrid )
pos = GetNearestGridPosition( pos );
oldpos = GetCrossHairPosition();
gridSize = GetScreen()->GetGridSize();
switch( aHotKey )
{
case WXK_NUMPAD8:
case WXK_UP:
pos.y -= KiROUND( gridSize.y );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD2:
case WXK_DOWN:
pos.y += KiROUND( gridSize.y );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD4:
case WXK_LEFT:
pos.x -= KiROUND( gridSize.x );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD6:
case WXK_RIGHT:
pos.x += KiROUND( gridSize.x );
m_canvas->MoveCursor( pos );
break;
default:
break;
}
// Put cursor in new position, according to the zoom keys (if any).
SetCrossHairPosition( pos, snapToGrid );
/* Put cursor on grid or a pad centre if requested. If the tool DELETE is active the
* cursor is left off grid this is better to reach items to delete off grid,
*/
if( GetToolId() == ID_PCB_DELETE_ITEM_BUTT )
snapToGrid = false;
// Cursor is left off grid if no block in progress
if( GetScreen()->m_BlockLocate.GetState() != STATE_NO_BLOCK )
snapToGrid = true;
wxPoint curs_pos = pos;
wxSize igridsize;
igridsize.x = KiROUND( gridSize.x );
igridsize.y = KiROUND( gridSize.y );
if( Magnetize( this, GetToolId(), igridsize, curs_pos, &pos ) )
{
SetCrossHairPosition( pos, false );
}
else
{
// If there's no intrusion and DRC is active, we pass the cursor
// "as is", and let ShowNewTrackWhenMovingCursor figure out what to do.
if( !g_Drc_On || !g_CurrentTrackSegment ||
(BOARD_ITEM*)g_CurrentTrackSegment != this->GetCurItem() ||
!LocateIntrusion( m_Pcb->m_Track, g_CurrentTrackSegment,
GetScreen()->m_Active_Layer, RefPos( true ) ) )
{
SetCrossHairPosition( curs_pos, snapToGrid );
}
}
if( oldpos != GetCrossHairPosition() )
{
pos = GetCrossHairPosition();
SetCrossHairPosition( oldpos, false );
m_canvas->CrossHairOff( aDC );
SetCrossHairPosition( pos, false );
m_canvas->CrossHairOn( aDC );
if( m_canvas->IsMouseCaptured() )
{
#ifdef USE_WX_OVERLAY
wxDCOverlay oDC( m_overlay, (wxWindowDC*)aDC );
oDC.Clear();
m_canvas->CallMouseCapture( aDC, aPosition, false );
#else
m_canvas->CallMouseCapture( aDC, aPosition, true );
#endif
}
#ifdef USE_WX_OVERLAY
else
{
m_overlay.Reset();
}
#endif
}
if( aHotKey )
{
OnHotKey( aDC, aHotKey, aPosition );
}
UpdateStatusBar(); // Display new cursor coordinates
}
void FOOTPRINT_EDIT_FRAME::GeneralControl( wxDC* aDC, const wxPoint& aPosition, int aHotKey )
{
wxRealPoint gridSize;
wxPoint oldpos;
wxPoint pos = aPosition;
// when moving mouse, use the "magnetic" grid, unless the shift+ctrl keys is pressed
// for next cursor position
// ( shift or ctrl key down are PAN command with mouse wheel)
bool snapToGrid = true;
if( !aHotKey && wxGetKeyState( WXK_SHIFT ) && wxGetKeyState( WXK_CONTROL ) )
snapToGrid = false;
if( snapToGrid )
pos = GetNearestGridPosition( pos );
oldpos = GetCrossHairPosition();
gridSize = GetScreen()->GetGridSize();
switch( aHotKey )
{
case WXK_NUMPAD8:
case WXK_UP:
pos.y -= KiROUND( gridSize.y );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD2:
case WXK_DOWN:
pos.y += KiROUND( gridSize.y );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD4:
case WXK_LEFT:
pos.x -= KiROUND( gridSize.x );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD6:
case WXK_RIGHT:
pos.x += KiROUND( gridSize.x );
m_canvas->MoveCursor( pos );
break;
default:
break;
}
SetCrossHairPosition( pos, snapToGrid );
if( oldpos != GetCrossHairPosition() )
{
pos = GetCrossHairPosition();
SetCrossHairPosition( oldpos, false );
m_canvas->CrossHairOff( aDC );
SetCrossHairPosition( pos, snapToGrid );
m_canvas->CrossHairOn( aDC );
if( m_canvas->IsMouseCaptured() )
{
#ifdef USE_WX_OVERLAY
wxDCOverlay oDC( m_overlay, (wxWindowDC*)aDC );
oDC.Clear();
m_canvas->CallMouseCapture( aDC, aPosition, false );
#else
m_canvas->CallMouseCapture( aDC, aPosition, true );
#endif
}
#ifdef USE_WX_OVERLAY
else
{
m_overlay.Reset();
}
#endif
}
if( aHotKey )
{
OnHotKey( aDC, aHotKey, aPosition );
}
UpdateStatusBar();
}
void SCH_EDIT_FRAME::GeneralControl( wxDC* aDC, const wxPoint& aPosition, int aHotKey )
{
wxRealPoint gridSize;
SCH_SCREEN* screen = GetScreen();
wxPoint oldpos;
wxPoint pos = aPosition;
// when moving mouse, use the "magnetic" grid, unless the shift+ctrl keys is pressed
// for next cursor position
// ( shift or ctrl key down are PAN command with mouse wheel)
bool snapToGrid = true;
if( !aHotKey && wxGetKeyState( WXK_SHIFT ) && wxGetKeyState( WXK_CONTROL ) )
snapToGrid = false;
// Cursor is left off grid only if no block in progress
if( GetScreen()->m_BlockLocate.GetState() != STATE_NO_BLOCK )
snapToGrid = true;
if( snapToGrid )
pos = screen->GetNearestGridPosition( pos );
oldpos = screen->GetCrossHairPosition();
gridSize = screen->GetGridSize();
switch( aHotKey )
{
case 0:
break;
case WXK_NUMPAD8:
case WXK_UP:
pos.y -= KiROUND( gridSize.y );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD2:
case WXK_DOWN:
pos.y += KiROUND( gridSize.y );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD4:
case WXK_LEFT:
pos.x -= KiROUND( gridSize.x );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD6:
case WXK_RIGHT:
pos.x += KiROUND( gridSize.x );
m_canvas->MoveCursor( pos );
break;
default:
break;
}
// Update cursor position.
screen->SetCrossHairPosition( pos, snapToGrid );
if( oldpos != screen->GetCrossHairPosition() )
{
pos = screen->GetCrossHairPosition();
screen->SetCrossHairPosition( oldpos, false);
m_canvas->CrossHairOff( aDC );
screen->SetCrossHairPosition( pos, snapToGrid );
m_canvas->CrossHairOn( aDC );
if( m_canvas->IsMouseCaptured() )
{
#ifdef USE_WX_OVERLAY
wxDCOverlay oDC( m_overlay, (wxWindowDC*)aDC );
oDC.Clear();
m_canvas->CallMouseCapture( aDC, aPosition, false );
#else
m_canvas->CallMouseCapture( aDC, aPosition, true );
#endif
}
#ifdef USE_WX_OVERLAY
else
{
m_overlay.Reset();
}
#endif
}
if( aHotKey )
{
if( screen->GetCurItem() && screen->GetCurItem()->GetFlags() )
OnHotKey( aDC, aHotKey, aPosition, screen->GetCurItem() );
else
OnHotKey( aDC, aHotKey, aPosition, NULL );
}
UpdateStatusBar(); /* Display cursor coordinates info */
}
void FOOTPRINT_EDIT_FRAME::GeneralControl( wxDC* aDC, const wxPoint& aPosition, int aHotKey )
{
wxRealPoint gridSize;
wxPoint oldpos;
wxPoint pos = aPosition;
pos = GetScreen()->GetNearestGridPosition( aPosition );
oldpos = GetScreen()->GetCrossHairPosition();
gridSize = GetScreen()->GetGridSize();
switch( aHotKey )
{
case WXK_NUMPAD8:
case WXK_UP:
pos.y -= wxRound( gridSize.y );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD2:
case WXK_DOWN:
pos.y += wxRound( gridSize.y );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD4:
case WXK_LEFT:
pos.x -= wxRound( gridSize.x );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD6:
case WXK_RIGHT:
pos.x += wxRound( gridSize.x );
m_canvas->MoveCursor( pos );
break;
default:
break;
}
GetScreen()->SetCrossHairPosition( pos );
if( oldpos != GetScreen()->GetCrossHairPosition() )
{
pos = GetScreen()->GetCrossHairPosition();
GetScreen()->SetCrossHairPosition( oldpos );
m_canvas->CrossHairOff( aDC );
GetScreen()->SetCrossHairPosition( pos );
m_canvas->CrossHairOn( aDC );
if( m_canvas->IsMouseCaptured() )
{
#ifdef USE_WX_OVERLAY
wxDCOverlay oDC( m_overlay, (wxWindowDC*)aDC );
oDC.Clear();
m_canvas->CallMouseCapture( aDC, aPosition, false );
#else
m_canvas->CallMouseCapture( aDC, aPosition, true );
#endif
}
#ifdef USE_WX_OVERLAY
else
{
m_overlay.Reset();
}
#endif
}
if( aHotKey )
{
OnHotKey( aDC, aHotKey, aPosition );
}
UpdateStatusBar();
}
void PCB_EDIT_FRAME::GeneralControl( wxDC* aDC, const wxPoint& aPosition, int aHotKey )
{
wxRealPoint gridSize;
wxPoint oldpos;
wxPoint pos = GetScreen()->GetNearestGridPosition( aPosition );
oldpos = GetScreen()->GetCrossHairPosition();
gridSize = GetScreen()->GetGridSize();
switch( aHotKey )
{
case WXK_NUMPAD8:
case WXK_UP:
pos.y -= wxRound( gridSize.y );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD2:
case WXK_DOWN:
pos.y += wxRound( gridSize.y );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD4:
case WXK_LEFT:
pos.x -= wxRound( gridSize.x );
m_canvas->MoveCursor( pos );
break;
case WXK_NUMPAD6:
case WXK_RIGHT:
pos.x += wxRound( gridSize.x );
m_canvas->MoveCursor( pos );
break;
default:
break;
}
// Put cursor in new position, according to the zoom keys (if any).
GetScreen()->SetCrossHairPosition( pos );
/* Put cursor on grid or a pad centre if requested. If the tool DELETE is active the
* cursor is left off grid this is better to reach items to delete off grid,
*/
bool keep_on_grid = true;
if( GetToolId() == ID_PCB_DELETE_ITEM_BUTT )
keep_on_grid = false;
/* Cursor is left off grid if no block in progress and no moving object */
if( GetScreen()->m_BlockLocate.m_State != STATE_NO_BLOCK )
keep_on_grid = true;
EDA_ITEM* DrawStruct = GetScreen()->GetCurItem();
if( DrawStruct && DrawStruct->GetFlags() )
keep_on_grid = true;
if( keep_on_grid )
{
wxPoint on_grid = GetScreen()->GetNearestGridPosition( pos );
wxSize grid;
grid.x = (int) GetScreen()->GetGridSize().x;
grid.y = (int) GetScreen()->GetGridSize().y;
if( Magnetize( m_Pcb, this, GetToolId(), grid, on_grid, &pos ) )
{
GetScreen()->SetCrossHairPosition( pos, false );
}
else
{
// If there's no intrusion and DRC is active, we pass the cursor
// "as is", and let ShowNewTrackWhenMovingCursor figure out what to do.
if( !Drc_On || !g_CurrentTrackSegment
|| (BOARD_ITEM*)g_CurrentTrackSegment != this->GetCurItem()
|| !LocateIntrusion( m_Pcb->m_Track, g_CurrentTrackSegment,
GetScreen()->m_Active_Layer, GetScreen()->RefPos( true ) ) )
{
GetScreen()->SetCrossHairPosition( on_grid );
}
}
}
if( oldpos != GetScreen()->GetCrossHairPosition() )
{
pos = GetScreen()->GetCrossHairPosition();
GetScreen()->SetCrossHairPosition( oldpos, false );
m_canvas->CrossHairOff( aDC );
GetScreen()->SetCrossHairPosition( pos, false );
m_canvas->CrossHairOn( aDC );
if( m_canvas->IsMouseCaptured() )
{
#ifdef USE_WX_OVERLAY
wxDCOverlay oDC( m_overlay, (wxWindowDC*)aDC );
oDC.Clear();
m_canvas->CallMouseCapture( aDC, aPosition, false );
#else
m_canvas->CallMouseCapture( aDC, aPosition, true );
#endif
}
#ifdef USE_WX_OVERLAY
else
{
m_overlay.Reset();
}
#endif
}
if( aHotKey )
{
OnHotKey( aDC, aHotKey, aPosition );
}
UpdateStatusBar(); /* Display new cursor coordinates */
}
