static void __iomem *wsp_h8_getaddr(void)
{
struct device_node *aliases;
struct device_node *uart;
struct property *path;
void __iomem *va = NULL;
/*
* there is nothing in the devtree to tell us which is mapped
* to the H8, but se know it is the second serial port.
*/
aliases = of_find_node_by_path("/aliases");
if (aliases == NULL)
return NULL;
path = of_find_property(aliases, "serial1", NULL);
if (path == NULL)
goto out;
uart = of_find_node_by_path(path->value);
if (uart == NULL)
goto out;
va = of_iomap(uart, 0);
/* remove it so no one messes with it */
of_detach_node(uart);
of_node_put(uart);
out:
of_node_put(aliases);
return va;
}
static void __iomem *wsp_h8_getaddr(void)
{
struct device_node *aliases;
struct device_node *uart;
struct property *path;
void __iomem *va = NULL;
/*
*/
aliases = of_find_node_by_path("/aliases");
if (aliases == NULL)
return NULL;
path = of_find_property(aliases, "serial1", NULL);
if (path == NULL)
goto out;
uart = of_find_node_by_path(path->value);
if (uart == NULL)
goto out;
va = of_iomap(uart, 0);
/* */
of_detach_node(uart);
of_node_put(uart);
out:
of_node_put(aliases);
return va;
}
int dlpar_detach_node(struct device_node *dn)
{
int rc;
rc = of_detach_node(dn);
if (rc)
return rc;
of_node_put(dn); /* Must decrement the refcount */
return 0;
}
int dlpar_detach_node(struct device_node *dn)
{
struct device_node *child;
int rc;
child = of_get_next_child(dn, NULL);
while (child) {
dlpar_detach_node(child);
child = of_get_next_child(dn, child);
}
rc = of_detach_node(dn);
if (rc)
return rc;
return 0;
}
int dlpar_detach_node(struct device_node *dn)
{
struct device_node *child;
int rc;
child = of_get_next_child(dn, NULL);
while (child) {
dlpar_detach_node(child);
child = of_get_next_child(dn, child);
}
rc = of_detach_node(dn);
if (rc)
return rc;
of_node_put(dn); /* Must decrement the refcount */
return 0;
}
int dlpar_detach_node(struct device_node *dn)
{
#ifdef CONFIG_PROC_DEVICETREE
struct device_node *parent = dn->parent;
struct property *prop = dn->properties;
while (prop) {
remove_proc_entry(prop->name, dn->pde);
prop = prop->next;
}
if (dn->pde)
remove_proc_entry(dn->pde->name, parent->pde);
#endif
pSeries_reconfig_notify(PSERIES_RECONFIG_REMOVE, dn);
of_detach_node(dn);
of_node_put(dn); /* Must decrement the refcount */
return 0;
}
static void __init mpc885ads_setup_arch(void)
{
struct device_node *np;
cpm_reset();
init_ioports();
np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr");
if (!np) {
printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
return;
}
bcsr = of_iomap(np, 0);
bcsr5 = of_iomap(np, 1);
of_node_put(np);
if (!bcsr || !bcsr5) {
printk(KERN_CRIT "Could not remap BCSR\n");
return;
}
clrbits32(&bcsr[1], BCSR1_RS232EN_1);
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
setbits32(&bcsr[1], BCSR1_RS232EN_2);
#else
clrbits32(&bcsr[1], BCSR1_RS232EN_2);
#endif
clrbits32(bcsr5, BCSR5_MII1_EN);
setbits32(bcsr5, BCSR5_MII1_RST);
udelay(1000);
clrbits32(bcsr5, BCSR5_MII1_RST);
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
clrbits32(bcsr5, BCSR5_MII2_EN);
setbits32(bcsr5, BCSR5_MII2_RST);
udelay(1000);
clrbits32(bcsr5, BCSR5_MII2_RST);
#else
setbits32(bcsr5, BCSR5_MII2_EN);
#endif
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
clrbits32(&bcsr[4], BCSR4_ETH10_RST);
udelay(1000);
setbits32(&bcsr[4], BCSR4_ETH10_RST);
setbits32(&bcsr[1], BCSR1_ETHEN);
np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80");
#else
np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40");
#endif
/* The SCC3 enet registers overlap the SMC1 registers, so
* one of the two must be removed from the device tree.
*/
if (np) {
of_detach_node(np);
of_node_put(np);
}
}