/*
* platform-specific code to shutdown a CPU
* Called with IRQs disabled
*/
void platform_cpu_die(unsigned int cpu)
{
unsigned int this_cpu;
flush_cache_all();
dsb();
/*
* we're ready for shutdown now, so do it
*/
if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
pr_err("Secure clear status failed\n");
for (;;) {
/*
* Enter into low power state
*/
omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
this_cpu = smp_processor_id();
if (omap_read_auxcoreboot0() == this_cpu) {
/*
* OK, proper wakeup, we're done
*/
break;
}
pr_debug("CPU%u: spurious wakeup call\n", cpu);
}
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
/*
* Set synchronisation state between this boot processor
* and the secondary one
*/
spin_lock(&boot_lock);
/*
* Update the AuxCoreBoot0 with boot state for secondary core.
* omap_secondary_startup() routine will hold the secondary core till
* the AuxCoreBoot1 register is updated with cpu state
* A barrier is added to ensure that write buffer is drained
*/
flush_cache_all();
outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
omap_modify_auxcoreboot0(0x200, 0xfffffdff);
smp_cross_call(cpumask_of(cpu));
set_event();
flush_cache_all();
smp_wmb();
/*
* Now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
spin_unlock(&boot_lock);
return 0;
}
/*
* platform-specific code to shutdown a CPU
* Called with IRQs disabled
*/
void platform_cpu_die(unsigned int cpu)
{
flush_cache_all();
dsb();
/*
* we're ready for shutdown now, so do it
*/
if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
printk(KERN_CRIT "Secure clear status failed\n");
for (;;) {
/*
* Execute WFI
*/
do_wfi();
if (omap_read_auxcoreboot0() == cpu) {
/*
* OK, proper wakeup, we're done
*/
break;
}
pr_debug("CPU%u: spurious wakeup call\n", cpu);
}
}
static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
static struct clockdomain *cpu1_clkdm;
static bool booted;
void __iomem *base = omap_get_wakeupgen_base();
/*
* Set synchronisation state between this boot processor
* and the secondary one
*/
spin_lock(&boot_lock);
/*
* Update the AuxCoreBoot0 with boot state for secondary core.
* omap_secondary_startup() routine will hold the secondary core till
* the AuxCoreBoot1 register is updated with cpu state
* A barrier is added to ensure that write buffer is drained
*/
if (omap_secure_apis_support())
omap_modify_auxcoreboot0(0x200, 0xfffffdff);
else
__raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
flush_cache_all();
smp_wmb();
if (!cpu1_clkdm)
cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
/*
* The SGI(Software Generated Interrupts) are not wakeup capable
* from low power states. This is known limitation on OMAP4 and
* needs to be worked around by using software forced clockdomain
* wake-up. To wakeup CPU1, CPU0 forces the CPU1 clockdomain to
* software force wakeup. The clockdomain is then put back to
* hardware supervised mode.
* More details can be found in OMAP4430 TRM - Version J
* Section :
* 4.3.4.2 Power States of CPU0 and CPU1
*/
if (booted) {
clkdm_wakeup(cpu1_clkdm);
clkdm_allow_idle(cpu1_clkdm);
} else {
dsb_sev();
booted = true;
}
gic_raise_softirq(cpumask_of(cpu), 0);
/*
* Now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
spin_unlock(&boot_lock);
return 0;
}
/*
* platform-specific code to shutdown a CPU
* Called with IRQs disabled
*/
void platform_cpu_die(unsigned int cpu)
{
unsigned int this_cpu = hard_smp_processor_id();
struct clockdomain *cpu1_clkdm;
if (cpu != this_cpu) {
pr_crit("platform_cpu_die running on %u, should be %u\n",
this_cpu, cpu);
BUG();
}
complete(&cpu_killed);
flush_cache_all();
wmb();
/*
* we're ready for shutdown now, so do it
*/
if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
pr_err("Secure clear status failed\n");
for (;;) {
/*
* Enter into low power state
* clear all interrupt wakeup sources
*/
omap4_wakeupgen_clear_all(cpu);
#ifdef CONFIG_PM
omap4_enter_lowpower(cpu, PWRDM_POWER_OFF);
#else
wmb();
do_wfi();
#endif
if (omap_read_auxcoreboot0() == cpu) {
/*
* OK, proper wakeup, we're done
*/
this_cpu = hard_smp_processor_id();
omap4_wakeupgen_set_all(this_cpu);
/*
* Restore clock domain to HW_AUTO
*/
cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
omap2_clkdm_allow_idle(cpu1_clkdm);
break;
}
pr_debug("CPU%u: spurious wakeup call\n", cpu);
}
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
struct clockdomain *cpu1_clkdm;
static bool booted;
/*
* Set synchronisation state between this boot processor
* and the secondary one
*/
spin_lock(&boot_lock);
/*
* Update the AuxCoreBoot0 with boot state for secondary core.
* omap_secondary_startup() routine will hold the secondary core till
* the AuxCoreBoot1 register is updated with cpu state
* A barrier is added to ensure that write buffer is drained
*/
omap_modify_auxcoreboot0(0x200, 0xfffffdff);
flush_cache_all();
smp_wmb();
/*
* SGI isn't wakeup capable from low power states. This is
* known limitation and can be worked around by using software
* forced wake-up. After the wakeup, the CPU will restore it
* to hw_auto. This code also gets initialised but pm init code
* initialises the CPUx clockdomain to hw-auto mode
*/
if (booted) {
cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
omap2_clkdm_wakeup(cpu1_clkdm);
smp_cross_call(cpumask_of(cpu));
} else {
set_event();
booted = true;
}
/*
* Now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
spin_unlock(&boot_lock);
return 0;
}
void __ref platform_cpu_die(unsigned int cpu)
{
unsigned int this_cpu;
flush_cache_all();
dsb();
if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
pr_err("Secure clear status failed\n");
for (;;) {
omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
this_cpu = smp_processor_id();
if (omap_read_auxcoreboot0() == this_cpu) {
break;
}
pr_debug("CPU%u: spurious wakeup call\n", cpu);
}
}
static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
static struct clockdomain *cpu1_clkdm;
static bool booted;
static struct powerdomain *cpu1_pwrdm;
void __iomem *base = omap_get_wakeupgen_base();
/*
* Set synchronisation state between this boot processor
* and the secondary one
*/
spin_lock(&boot_lock);
/*
* Update the AuxCoreBoot0 with boot state for secondary core.
* omap4_secondary_startup() routine will hold the secondary core till
* the AuxCoreBoot1 register is updated with cpu state
* A barrier is added to ensure that write buffer is drained
*/
if (omap_secure_apis_support())
omap_modify_auxcoreboot0(0x200, 0xfffffdff);
else
__raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
if (!cpu1_clkdm && !cpu1_pwrdm) {
cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
cpu1_pwrdm = pwrdm_lookup("cpu1_pwrdm");
}
/*
* The SGI(Software Generated Interrupts) are not wakeup capable
* from low power states. This is known limitation on OMAP4 and
* needs to be worked around by using software forced clockdomain
* wake-up. To wakeup CPU1, CPU0 forces the CPU1 clockdomain to
* software force wakeup. The clockdomain is then put back to
* hardware supervised mode.
* More details can be found in OMAP4430 TRM - Version J
* Section :
* 4.3.4.2 Power States of CPU0 and CPU1
*/
if (booted && cpu1_pwrdm && cpu1_clkdm) {
/*
* GIC distributor control register has changed between
* CortexA9 r1pX and r2pX. The Control Register secure
* banked version is now composed of 2 bits:
* bit 0 == Secure Enable
* bit 1 == Non-Secure Enable
* The Non-Secure banked register has not changed
* Because the ROM Code is based on the r1pX GIC, the CPU1
* GIC restoration will cause a problem to CPU0 Non-Secure SW.
* The workaround must be:
* 1) Before doing the CPU1 wakeup, CPU0 must disable
* the GIC distributor
* 2) CPU1 must re-enable the GIC distributor on
* it's wakeup path.
*/
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) {
local_irq_disable();
gic_dist_disable();
}
/*
* Ensure that CPU power state is set to ON to avoid CPU
* powerdomain transition on wfi
*/
clkdm_wakeup(cpu1_clkdm);
omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON);
clkdm_allow_idle(cpu1_clkdm);
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) {
while (gic_dist_disabled()) {
udelay(1);
cpu_relax();
}
gic_timer_retrigger();
local_irq_enable();
}
} else {
dsb_sev();
booted = true;
}
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
/*
* Now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
spin_unlock(&boot_lock);
return 0;
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
static struct clockdomain *cpu1_clkdm;
static bool booted;
/*
* Set synchronisation state between this boot processor
* and the secondary one
*/
spin_lock(&boot_lock);
/*
* Update the AuxCoreBoot0 with boot state for secondary core.
* omap_secondary_startup() routine will hold the secondary core till
* the AuxCoreBoot1 register is updated with cpu state
* A barrier is added to ensure that write buffer is drained
*/
omap_modify_auxcoreboot0(0x200, 0xfffffdff);
flush_cache_all();
smp_wmb();
if (!cpu1_clkdm)
cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
/*
* The SGI(Software Generated Interrupts) are not wakeup capable
* from low power states. This is known limitation on OMAP4 and
* needs to be worked around by using software forced clockdomain
* wake-up. To wakeup CPU1, CPU0 forces the CPU1 clockdomain to
* software force wakeup. After the wakeup, CPU1 restores its
* clockdomain hardware supervised mode.
* More details can be found in OMAP4430 TRM - Version J
* Section :
* 4.3.4.2 Power States of CPU0 and CPU1
*/
if (booted) {
/*
* GIC distributor control register has changed between
* CortexA9 r1pX and r2pX. The Control Register secure
* banked version is now composed of 2 bits:
* bit 0 == Secure Enable
* bit 1 == Non-Secure Enable
* The Non-Secure banked register has not changed
* Because the ROM Code is based on the r1pX GIC, the CPU1
* GIC restoration will cause a problem to CPU0 Non-Secure SW.
* The workaround must be:
* 1) Before doing the CPU1 wakeup, CPU0 must disable
* the GIC distributor
* 2) CPU1 must re-enable the GIC distributor on
* it's wakeup path.
*/
if (!cpu_is_omap443x()) {
local_irq_disable();
gic_dist_disable();
}
clkdm_wakeup(cpu1_clkdm);
if (!cpu_is_omap443x()) {
while (gic_dist_disabled()) {
udelay(1);
cpu_relax();
}
gic_timer_retrigger();
local_irq_enable();
}
} else {
clkdm_init_mpu1(cpu1_clkdm);
dsb_sev();
booted = true;
}
/*
* Now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
spin_unlock(&boot_lock);
return 0;
}
