static void __init omap5panda_display_init(void)
{
struct sgx_omaplfb_config data = {
.tiler2d_buffers = 0,
.swap_chain_length = 2,
.vram_buffers = 2,
};
omapfb_set_platform_data(&panda_fb_pdata);
omap_vram_set_sdram_vram(OMAP5_SEVM_FB_RAM_SIZE, 0);
sgx_omaplfb_set(0, &data);
i2c_register_board_info(0, hdmi_i2c_eeprom,
ARRAY_SIZE(hdmi_i2c_eeprom));
platform_device_register(&hdmi_edid_device);
omap5panda_hdmi_init();
omap_display_init(&panda5_dss_data);
}
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = GPIO_HUB_NRESET,
.reset_gpio_port[2] = GPIO_ETH_NRESET
};
static void __init omap_ehci_ohci_init(void)
{
struct clk *phy_ref_clk;
/* FREF_CLK1 provides the 19.2 MHz reference clock to the PHY */
phy_ref_clk = clk_get(NULL, "auxclk1_ck");
if (IS_ERR(phy_ref_clk)) {
pr_err("Cannot request auxclk1\n");
} else {
clk_set_rate(phy_ref_clk, 19200000);
clk_enable(phy_ref_clk);
}
omap_mux_init_gpio(GPIO_HUB_NRESET,
OMAP_PIN_OUTPUT | OMAP_PIN_OFF_NONE | OMAP_MUX_MODE6);
omap_mux_init_gpio(GPIO_ETH_NRESET,
OMAP_PIN_OUTPUT | OMAP_PIN_OFF_NONE | OMAP_MUX_MODE6);
usbhs_init(&usbhs_bdata);
return;
}
static void __init omap_5_panda_init(void)
{
omap5_mux_init(board_mux, NULL, OMAP_PACKAGE_CBL);
omap_sdrc_init(NULL, NULL);
omap_init_board_version(BOARD_MAKE_VERSION(BOARD_OMAP5_UEVM, 0));
omap_create_board_props();
omap5pandai2c_init();
omap_msecure_init();
omap5_pmic_init(1, PALMAS_NAME, OMAP44XX_IRQ_SYS_1N, PALMAS_DATA,
"twl6040", OMAP44XX_IRQ_SYS_2N, &twl6040_data);
omap5_board_serial_init();
platform_device_register(&dummy_sd_regulator_device);
omap_ehci_ohci_init();
/* TODO: Once the board identification is passed in from the
* bootloader pass in the HACK board ID to the conn board file
*/
omap4plus_connectivity_init();
omap_hsmmc_init(mmc);
usb_dwc3_init();
platform_add_devices(panda5_devices, ARRAY_SIZE(panda5_devices));
omap_init_dmm_tiler();
omap5_register_ion();
omap5panda_display_init();
}
static void __init omap_panda5_reserve(void)
{
omap_rproc_reserve_cma(RPROC_CMA_OMAP5);
omap5_ion_init();
omap_reserve();
}
static void __init omap4_panda_reserve(void)
{
omap_rproc_reserve_cma(RPROC_CMA_OMAP4);
omap_reserve();
}
static void __init omap_4430sdp_reserve(void)
{
omap_rproc_reserve_cma(RPROC_CMA_OMAP4);
omap_reserve();
}