Ejemplos de omap_sfh7741prox_init en C++ (Cpp)

Ejemplo n.º 1

Archivo: board-4430sdp.c Proyecto: bittorf/linux

static void __init omap_4430sdp_init(void)
{
	int status;
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	omap4_i2c_init();
	omap_sfh7741prox_init();
	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
	board_serial_init();
	omap4_sdp4430_wifi_init();
	omap4_twl6030_hsmmc_init(mmc);

	usb_musb_init(&musb_board_data);

	status = omap_ethernet_init();
	if (status) {
		pr_err("Ethernet initialization failed: %d\n", status);
	} else {
		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
		spi_register_board_info(sdp4430_spi_board_info,
				ARRAY_SIZE(sdp4430_spi_board_info));
	}

	status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
	if (status)
		pr_err("Keypad initialization failed: %d\n", status);

	omap_4430sdp_display_init();
}

Ejemplo n.º 2

Archivo: board-4430sdp.c Proyecto: KalenAnson/NestDFUAttack

static void __init omap_4430sdp_init(void)
{
	int status;
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, package);

	omap4_i2c_init();
	omap_sfh7741prox_init();
	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
	omap_serial_init();
	omap4_twl6030_hsmmc_init(mmc);
	/* OMAP4 SDP uses internal transceiver so register nop transceiver */
	usb_nop_xceiv_register(0);
	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
	if (!cpu_is_omap44xx())
		usb_musb_init(&musb_board_data);

	status = omap_ethernet_init();
	if (status) {
		pr_err("Ethernet initialization failed: %d\n", status);
	} else {
		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
		spi_register_board_info(sdp4430_spi_board_info,
				ARRAY_SIZE(sdp4430_spi_board_info));
	}
}

Ejemplo n.º 3

Archivo: board-44xx-blaze-sensors.c Proyecto: robacklin/omap-android

int __init blaze_sensor_init(void)
{
    omap_sfh7741prox_init();
    omap_cma3000accl_init();

    omap_register_i2c_bus(3, 400, blaze_bus3_sensor_boardinfo,
                          ARRAY_SIZE(blaze_bus3_sensor_boardinfo));

    omap_register_i2c_bus(4, 400, blaze_bus4_sensor_boardinfo,
                          ARRAY_SIZE(blaze_bus4_sensor_boardinfo));

    platform_device_register(&blaze_proximity_device);

    return 0;
}

Ejemplo n.º 4

Archivo: board-4430sdp.c Proyecto: BobZhome/gt-p3113-kernel

static void __init omap_4430sdp_init(void)
{
	int status;
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	omap_emif_setup_device_details(&emif_devices, &emif_devices);

	omap_board_config = sdp4430_config;
	omap_board_config_size = ARRAY_SIZE(sdp4430_config);

	omap4_i2c_init();
	omap_sfh7741prox_init();
	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
	board_serial_init();
	omap4_twl6030_hsmmc_init(mmc);

	usb_musb_init(&musb_board_data);

	status = omap_ethernet_init();
	if (status) {
		pr_err("Ethernet initialization failed: %d\n", status);
	} else {
		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
		spi_register_board_info(sdp4430_spi_board_info,
				ARRAY_SIZE(sdp4430_spi_board_info));
	}

	status = omap4_keyboard_init(&sdp4430_keypad_data);
	if (status)
		pr_err("Keypad initialization failed: %d\n", status);

	omap_dmm_init();
	omap_4430sdp_display_init();

	if (cpu_is_omap446x()) {
		/* Vsel0 = gpio, vsel1 = gnd */
		status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
					OMAP_PIN_OFF_OUTPUT_HIGH, -1);
		if (status)
			pr_err("TPS62361 initialization failed: %d\n", status);
	}
}

Ejemplo n.º 5

Archivo: board-4430sdp.c Proyecto: bossino/panda_es_kernel

static void __init omap_4430sdp_init(void)
{
	int status;
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;

	/* Modification for ELPIDA LPDDR2-s4 8Gb memory device */
	omap_emif_set_device_details(1, &lpddr2_elpida_8G_S4_x2_info,
			lpddr2_elpida_8G_S4_timings,
			ARRAY_SIZE(lpddr2_elpida_8G_S4_timings),
			&lpddr2_elpida_S4_min_tck,
			&custom_configs);

	omap_emif_set_device_details(2, &lpddr2_elpida_8G_S4_x2_info,
			lpddr2_elpida_8G_S4_timings,
			ARRAY_SIZE(lpddr2_elpida_8G_S4_timings),
			&lpddr2_elpida_S4_min_tck,
			&custom_configs);

	omap4_mux_init(board_mux, NULL, package);

	omap_board_config = sdp4430_config;
	omap_board_config_size = ARRAY_SIZE(sdp4430_config);

	omap4_i2c_init();
	omap4_twl6030_hsmmc_init(mmc);
	omap_sfh7741prox_init();
	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
	omap_serial_init();
	omap_sdrc_init(NULL, NULL);
	omap4_sdp4430_wifi_init();

	usb_musb_init(&musb_board_data);

	status = omap_ethernet_init();
	if (status) {
		pr_err("Ethernet initialization failed: %d\n", status);
	} else {
		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
		spi_register_board_info(sdp4430_spi_board_info,
				ARRAY_SIZE(sdp4430_spi_board_info));
	}

	status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
	if (status)
		pr_err("Keypad initialization failed: %d\n", status);

	omap_4430sdp_display_init();

	if (cpu_is_omap446x()) {
		/* Vsel0 = gpio, vsel1 = gnd */
		status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
					OMAP_PIN_OFF_OUTPUT_HIGH, -1);
		if (status)
			pr_err("TPS62361 initialization failed: %d\n", status);
	}
	omap_enable_smartreflex_on_init();
	omap_rprm_regulator_init(sdp4430_rprm_regulators,
				 ARRAY_SIZE(sdp4430_rprm_regulators));

	enable_board_wakeups();
}