Ejemplo n.º 1
0
 void Spinner::setStepSize(float step)
 {
     if (step != d_stepSize)
     {
         d_stepSize = step;
         
         WindowEventArgs args(this);
         onStepChanged(args);
     }
 }
Ejemplo n.º 2
0
VESPERSSpatialLineScanConfigurationView::VESPERSSpatialLineScanConfigurationView(VESPERSSpatialLineScanConfiguration *config, QWidget *parent)
	: VESPERSScanConfigurationView(parent)
{
	config_ = config;
	AMTopFrame *frame = new AMTopFrame("VESPERS Line Scan Configuration");

	// Setup the group box for setting the start and end points.
	QGroupBox *positionsBox = new QGroupBox("Positions");

	start_ = buildPositionDoubleSpinBox("", " mm", config_->start(), 3);
	connect(start_, SIGNAL(editingFinished()), this, SLOT(onStartChanged()));
	connect(config_, SIGNAL(startChanged(double)), start_, SLOT(setValue(double)));

	QPushButton *startUseCurrentButton = new QPushButton("Use Current");
	connect(startUseCurrentButton, SIGNAL(clicked()), this, SLOT(onSetStartPosition()));

	QHBoxLayout *startPointLayout = new QHBoxLayout;
	startPointLayout->addWidget(new QLabel("Start:"));
	startPointLayout->addWidget(start_);
	startPointLayout->addWidget(startUseCurrentButton);

	end_ = buildPositionDoubleSpinBox("", " mm", config_->end(), 3);
	connect(end_, SIGNAL(editingFinished()), this, SLOT(onEndChanged()));
	connect(config_, SIGNAL(endChanged(double)), end_, SLOT(setValue(double)));

	QPushButton *endUseCurrentButton = new QPushButton("Use Current");
	connect(endUseCurrentButton, SIGNAL(clicked()), this, SLOT(onSetEndPosition()));

	QHBoxLayout *endPointLayout = new QHBoxLayout;
	endPointLayout->addWidget(new QLabel("End:"));
	endPointLayout->addWidget(end_);
	endPointLayout->addWidget(endUseCurrentButton);

	step_ = buildPositionDoubleSpinBox("", QString(" %1").arg(QString::fromUtf8("µm")), config_->step()*1000, 1);	// xStep needs to be in mm.
	connect(step_, SIGNAL(editingFinished()), this, SLOT(onStepChanged()));
	connect(config_, SIGNAL(stepChanged(double)), this, SLOT(updateStep(double)));

	QHBoxLayout *stepSizeLayout = new QHBoxLayout;
	stepSizeLayout->addWidget(new QLabel("Step Size:"));
	stepSizeLayout->addWidget(step_);
	stepSizeLayout->addStretch();

	otherPositionLabel_ = new QLabel(config_->otherMotorString(config_->motor()));
	otherPosition_ = buildPositionDoubleSpinBox("", " mm", config_->hasOtherPosition() ? config_->otherPosition() : 0, 3);
	connect(otherPosition_, SIGNAL(editingFinished()), this, SLOT(onOtherPositionChanged()));
	connect(config_, SIGNAL(otherPositionChanged(double)), otherPosition_, SLOT(setValue(double)));

	QHBoxLayout *otherPositionLayout = new QHBoxLayout;
	otherPositionLayout->addWidget(otherPositionLabel_);
	otherPositionLayout->addWidget(otherPosition_);
	otherPositionLayout->addStretch();

	mapInfo_ = new QLabel;
	updateMapInfo();

	QVBoxLayout *positionsLayout = new QVBoxLayout;
	positionsLayout->addLayout(startPointLayout);
	positionsLayout->addLayout(endPointLayout);
	positionsLayout->addLayout(stepSizeLayout);
	positionsLayout->addLayout(otherPositionLayout);
	positionsLayout->addWidget(mapInfo_);

	positionsBox->setLayout(positionsLayout);

	// Dwell time.
	dwellTime_ = addDwellTimeWidget(config_->time());
	connect(dwellTime_, SIGNAL(editingFinished()), this, SLOT(onDwellTimeChanged()));
	connect(config_, SIGNAL(timeChanged(double)), dwellTime_, SLOT(setValue(double)));

	QHBoxLayout *timeLayout = new QHBoxLayout;
	timeLayout->addWidget(new QLabel("Dwell Time:"));
	timeLayout->addWidget(dwellTime_);

	// The estimated scan time.
	estimatedTime_ = new QLabel;
	connect(config_, SIGNAL(totalTimeChanged(double)), this, SLOT(onEstimatedTimeChanged()));
	onEstimatedTimeChanged();

	QVBoxLayout *timeBoxLayout = new QVBoxLayout;
	timeBoxLayout->addLayout(timeLayout);
	timeBoxLayout->addWidget(estimatedTime_);

	QGroupBox *timeGroupBox = new QGroupBox("Time");
	timeGroupBox->setLayout(timeBoxLayout);

	// Using the CCD.
	QGroupBox *ccdBox = addCCDDetectorSelectionView();
	connect(ccdButtonGroup_, SIGNAL(buttonClicked(int)), this, SLOT(onCCDDetectorChanged(int)));
	connect(config_->dbObject(), SIGNAL(ccdDetectorChanged(int)), this, SLOT(updateCCDDetectorButtons(int)));
	ccdButtonGroup_->button(int(config_->ccdDetector()))->setChecked(true);
	ccdButtonGroup_->button((int)VESPERS::Roper)->hide();
	ccdButtonGroup_->button((int)VESPERS::Mar)->hide();

	configureCCDButton_ = new QPushButton(QIcon(":/hammer-wrench.png"), "Configure CCD");
	configureCCDButton_->setEnabled(config_->ccdDetector());
	connect(configureCCDButton_, SIGNAL(clicked()), this, SLOT(onConfigureCCDDetectorClicked()));

	// The fluorescence detector setup
	QGroupBox *fluorescenceDetectorGroupBox  = addFluorescenceDetectorSelectionView();
	connect(fluorescenceButtonGroup_, SIGNAL(buttonClicked(int)), this, SLOT(onFluorescenceDetectorChanged(int)));
	connect(config_->dbObject(), SIGNAL(fluorescenceDetectorChanged(int)), this, SLOT(updateFluorescenceDetector(int)));
	fluorescenceButtonGroup_->button((int)config_->fluorescenceDetector())->setChecked(true);

	// Ion chamber selection
	QGroupBox *ItGroupBox = addItSelectionView();
	connect(ItGroup_, SIGNAL(buttonClicked(int)), this, SLOT(onItClicked(int)));
	connect(config_->dbObject(), SIGNAL(transmissionChoiceChanged(int)), this, SLOT(updateItButtons(int)));

	QGroupBox *I0GroupBox = addI0SelectionView();
	connect(I0Group_, SIGNAL(buttonClicked(int)), this, SLOT(onI0Clicked(int)));
	connect(config_->dbObject(), SIGNAL(incomingChoiceChanged(int)), this, SLOT(updateI0Buttons(int)));

	I0Group_->button((int)config_->incomingChoice())->click();
	ItGroup_->button((int)config_->transmissionChoice())->click();

	QHBoxLayout *ionChambersLayout = new QHBoxLayout;
	ionChambersLayout->addWidget(I0GroupBox);
	ionChambersLayout->addWidget(ItGroupBox);

	// Motor selection.
	QGroupBox *motorSetChoiceBox = addMotorSelectionView(QStringList() << "H" << "X" << "V" << "Z", QList<int>() << VESPERS::H << VESPERS::X << VESPERS::V << VESPERS::Z);
	motorButtonGroup_->button(int(config_->motor()))->click();
	connect(motorButtonGroup_, SIGNAL(buttonClicked(int)), this, SLOT(onMotorChanged(int)));

	// CCD label.
	ccdText_ = new QLabel;
	ccdHelpText_ = new QLabel;
	ccdTextBox_ = new QGroupBox("CCD Detector Info");
	QVBoxLayout *ccdTextLayout = new QVBoxLayout;
	ccdTextLayout->addWidget(ccdText_);
	ccdTextLayout->addWidget(ccdHelpText_);
	ccdTextBox_->setLayout(ccdTextLayout);
	ccdTextBox_->setVisible(config_->ccdDetector() != VESPERS::NoCCD);

	// Scan name selection
	scanName_ = addScanNameView(config_->name());
	connect(scanName_, SIGNAL(editingFinished()), this, SLOT(onScanNameEdited()));
	connect(config_, SIGNAL(nameChanged(QString)), scanName_, SLOT(setText(QString)));
	onScanNameEdited();

	QFormLayout *scanNameLayout = new QFormLayout;
	scanNameLayout->addRow("Scan Name:", scanName_);

	// The roi text edit and configuration.
	roiText_ = new QTextEdit;
	roiText_->setReadOnly(true);

	QPushButton *configureXRFDetectorButton = new QPushButton(QIcon(":/hammer-wrench.png"), "Configure XRF Detector");
	connect(configureXRFDetectorButton, SIGNAL(clicked()), this, SLOT(onConfigureXRFDetectorClicked()));

	QFormLayout *roiTextLayout = new QFormLayout;
	roiTextLayout->addRow(roiText_);
	roiTextLayout->addRow(configureXRFDetectorButton);

	QGroupBox *roiTextBox = new QGroupBox("Regions Of Interest");
	roiTextBox->setLayout(roiTextLayout);

	// Label showing where the data will be saved.
	QLabel *exportPath = addExportPathLabel();

	QGroupBox *timeOffsetBox = addTimeOffsetLabel(config_->timeOffset());
	connect(timeOffset_, SIGNAL(valueChanged(double)), this, SLOT(setTimeOffset(double)));

	// Auto-export option.
	QGroupBox *autoExportGroupBox = addExporterOptionsView(QStringList(), config_->exportSpectraSources());
	connect(autoExportSpectra_, SIGNAL(toggled(bool)), config_, SLOT(setExportSpectraSources(bool)));
	connect(autoExportSpectra_, SIGNAL(toggled(bool)), config_, SLOT(setExportSpectraSources(bool)));

	// Setting up the layout.
	QGridLayout *contentsLayout = new QGridLayout;
	contentsLayout->addWidget(positionsBox, 0, 0, 2, 3);
	contentsLayout->addWidget(timeGroupBox, 2, 0, 1, 1);
	contentsLayout->addWidget(ccdBox, 3, 0, 1, 1);
	contentsLayout->addLayout(scanNameLayout, 4, 0, 1, 1);
	contentsLayout->addWidget(timeOffsetBox, 5, 0, 1, 1);
	contentsLayout->addWidget(configureCCDButton_, 6, 0, 1, 1);
	contentsLayout->addWidget(motorSetChoiceBox, 0, 3, 1, 1);
	contentsLayout->addWidget(fluorescenceDetectorGroupBox, 1, 3, 2, 1);
	contentsLayout->addLayout(ionChambersLayout, 3, 3, 2, 1);
	contentsLayout->addWidget(ccdTextBox_, 7, 0, 1, 6);
	contentsLayout->addWidget(roiTextBox, 0, 5, 3, 3);
	contentsLayout->addWidget(autoExportGroupBox, 3, 5, 1, 3);

	QHBoxLayout *squeezeContents = new QHBoxLayout;
	squeezeContents->addStretch();
	squeezeContents->addLayout(contentsLayout);
	squeezeContents->addStretch();

	QVBoxLayout *configViewLayout = new QVBoxLayout;
	configViewLayout->addWidget(frame);
	configViewLayout->addStretch();
	configViewLayout->addLayout(squeezeContents);
	configViewLayout->addStretch();
	configViewLayout->addWidget(exportPath, 0, Qt::AlignCenter);
	configViewLayout->addSpacing(30);

	setLayout(configViewLayout);
}