AudioSink::AudioSink(long const srate, int const latency, int const periods)
: rbuf_(nearestPowerOf2(srate * latency / ((periods + 1) * 1000)) * periods * 2)
, rateEst_(srate, rbuf_.size() / periods)
, mut_(SDL_CreateMutex())
, bufReadyCond_(SDL_CreateCond())
, failed_(openAudio(srate, rbuf_.size() / 2 / periods, fillBuffer, this) < 0)
{
rbuf_.fill(0);
}
void
SDL_sound_handler::unpause()
{
if (hasInputStreams()) {
openAudio();
SDL_PauseAudio(0);
}
sound_handler::unpause();
}
void
SDL_sound_handler::initAudio()
{
// NOTE: we open and close the audio card for the sole purpose
// of throwing an exception on error (unavailable audio
// card). Normally we'd want to open the audio card only
// when needed (it has a cost in number of wakeups).
//
openAudio();
closeAudio();
}
/** Initialise the device */
int sa_stream_open(sa_stream_t *s) {
int status = SA_SUCCESS;
ERROR_IF_NO_INIT(s);
switch (s->rwMode) {
case SA_MODE_WRONLY:
status = openAudio(s);
break;
default:
status = SA_ERROR_NOT_SUPPORTED;
break;
}
return status;
}
void
SDL_sound_handler::plugInputStream(std::auto_ptr<InputStream> newStreamer)
{
boost::mutex::scoped_lock lock(_mutex);
sound_handler::plugInputStream(newStreamer);
{ // TODO: this whole block should only be executed when adding
// the first stream.
#ifdef GNASH_DEBUG_SDL_AUDIO_PAUSING
log_debug("Unpausing SDL Audio on inpust stream plug...");
#endif
openAudio(); // lazy sound card initialization
SDL_PauseAudio(0); // start polling data from us
}
}
void
Mkit_sound_handler::plugInputStream(std::auto_ptr<InputStream> newStreamer)
{
boost::mutex::scoped_lock lock(_mutex);
sound_handler::plugInputStream(newStreamer);
{ // TODO: this whole block should only be executed when adding
// the first stream.
#ifdef GNASH_DEBUG_Mkit_AUDIO_PAUSING
log_debug("Unpausing Mkit Audio on inpust stream plug...");
#endif
openAudio();
sound_handler::unpause();
}
}
void
SDL_sound_handler::initAudio()
{
// NOTE: we open and close the audio card for the sole purpose
// of throwing an exception on error (unavailable audio
// card). Normally we'd want to open the audio card only
// when needed (it has a cost in number of wakeups).
openAudio();
#ifdef WIN32
// SDL can hang on windows if SDL_CloseAudio() is called immediately
// after SDL_OpenAudio(). It's evidently to do with threading, but
// internal to SDL. This is a tacky solution, but it's only windows.
gnashSleep(1);
#endif
closeAudio();
}
int ONScripter::playAVI( const char *filename, bool click_flag )
{
unsigned long length = script_h.cBR->getFileLength( filename );
if (length == 0){
fprintf( stderr, " *** can't find file [%s] ***\n", filename );
return 0;
}
#ifdef ANDROID
playVideoAndroid(filename);
return 0;
#endif
#if defined(USE_AVIFILE) && !defined(USE_SDL_RENDERER)
char *absolute_filename = new char[ strlen(archive_path) + strlen(filename) + 1 ];
sprintf( absolute_filename, "%s%s", archive_path, filename );
for ( unsigned int i=0 ; i<strlen( absolute_filename ) ; i++ )
if ( absolute_filename[i] == '/' ||
absolute_filename[i] == '\\' )
absolute_filename[i] = DELIMITER;
if ( audio_open_flag ) Mix_CloseAudio();
AVIWrapper *avi = new AVIWrapper();
if ( avi->init( absolute_filename, false ) == 0 &&
avi->initAV( screen_surface, audio_open_flag ) == 0 ){
if (avi->play( click_flag )) return 1;
}
delete avi;
delete[] absolute_filename;
if ( audio_open_flag ){
Mix_CloseAudio();
openAudio();
}
#else
fprintf( stderr, "avi command is disabled.\n" );
#endif
return 0;
}
/* AudioEntryPanel::open
* Opens the current entry and performs the appropriate conversions
*******************************************************************/
bool AudioEntryPanel::open()
{
// Check if already opened
if (opened)
return true;
// Stop if sound currently playing
resetStream();
subsong = 0;
num_tracks = 1;
// Get entry data
MemChunk& mcdata = entry->getMCData();
// Setup temp filename
wxFileName path(appPath(entry->getName(), DIR_TEMP));
// Add extension if missing
if (path.GetExt().IsEmpty())
path.SetExt(entry->getType()->getExtension());
// Convert if necessary, then write to file
MemChunk convdata;
if (entry->getType()->getFormat() == "snd_doom" || // Doom Sound -> WAV
entry->getType()->getFormat() == "snd_doom_mac")
Conversions::doomSndToWav(mcdata, convdata);
else if (entry->getType()->getFormat() == "snd_speaker") // Doom PC Speaker Sound -> WAV
Conversions::spkSndToWav(mcdata, convdata);
else if (entry->getType()->getFormat() == "snd_audiot") // AudioT PC Speaker Sound -> WAV
Conversions::spkSndToWav(mcdata, convdata, true);
else if (entry->getType()->getFormat() == "snd_wolf") // Wolfenstein 3D Sound -> WAV
Conversions::wolfSndToWav(mcdata, convdata);
else if (entry->getType()->getFormat() == "snd_voc") // Creative Voice File -> WAV
Conversions::vocToWav(mcdata, convdata);
else if (entry->getType()->getFormat() == "snd_jaguar") // Jaguar Doom Sound -> WAV
Conversions::jagSndToWav(mcdata, convdata);
else if (entry->getType()->getFormat() == "snd_bloodsfx") // Blood Sound -> WAV
Conversions::bloodToWav(entry, convdata);
else if (entry->getType()->getFormat() == "midi_mus") // MUS -> MIDI
{
Conversions::musToMidi(mcdata, convdata);
path.SetExt("mid");
}
else if (entry->getType()->getFormat() == "midi_xmi" || // HMI/HMP/XMI -> MIDI
entry->getType()->getFormat() == "midi_hmi" || entry->getType()->getFormat() == "midi_hmp")
{
Conversions::zmusToMidi(mcdata, convdata, 0, &num_tracks);
path.SetExt("mid");
}
else if (entry->getType()->getFormat() == "midi_gmid") // GMID -> MIDI
{
Conversions::gmidToMidi(mcdata, convdata);
path.SetExt("mid");
}
else
convdata.importMem(mcdata.getData(), mcdata.getSize());
// MIDI format
if (entry->getType()->getFormat().StartsWith("midi_"))
{
audio_type = AUTYPE_MIDI;
openMidi(convdata, path.GetFullPath());
}
// MOD format
else if (entry->getType()->getFormat().StartsWith("mod_"))
openMod(convdata);
// Other format
else
openAudio(convdata, path.GetFullPath());
// Keep filename so we can delete it later
prevfile = path.GetFullPath();
txt_title->SetLabel(entry->getPath(true));
txt_track->SetLabel(S_FMT("%d/%d", subsong+1, num_tracks));
updateInfo();
// Disable prev/next track buttons if only one track is available
if (num_tracks < 2)
{
btn_prev->Disable();
btn_next->Disable();
}
opened = true;
return true;
}
void InitSDLAudio()
{
SDL_Init(SDL_INIT_AUDIO);
openAudio();
}
int estimateChannelMean()
{
int result;
int retval = 0; /***** return value */
int width = 45, height = 11, i, j; /***** ncurses related variables */
WINDOW *channelscr = popupWindow (width, height);
wattrset (channelscr, color_term ? COLOR_PAIR(2) | A_BOLD : A_NORMAL); /***** set bg color of the dialog */
/*****
* draw a box around the dialog window
* and empty it.
*****/
werase (channelscr);
box (channelscr, 0, 0);
for (i = 1; i < width-1; i++)
for (j = 1; j < height-1; j++)
mvwaddch(channelscr, j, i, ' ');
/***** dialog header */
mvwaddstr(channelscr, 1, 2, "Estimating Channel Characteristics:");
mvwaddseparator(channelscr, 2, width);
/***** dialog message */
mvwaddstr(channelscr, 4, 2, "I'll calculate the characteristics of");
mvwaddstr(channelscr, 5, 2, "the recording channel now. Please remain");
mvwaddstr(channelscr, 6, 2, "silent until I say I'm done:");
mvwaddstrcntr(channelscr, 8, width, "Press any key to start ...");
wmove(channelscr, 1, 38); /***** set cursor to an appropriate location */
wrefresh (channelscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
/***** clear dialog */
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(channelscr, j, i, ' ');
/***** update dialog */
mvwaddstrcntr(channelscr, 5, width, "stand by ...");
wmove(channelscr, 1, 38); /***** set cursor to an appropriate location */
wrefresh (channelscr); /***** refresh the dialog */
if (openAudio() == AUDIO_ERR)
{
/*****
* if the audio device could not be opened,
* show a warning dialog and return to main menu
*****/
/***** clear dialog */
for (i = 1; i < width-1; i++)
mvwaddch(channelscr, 1, i, ' ');
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(channelscr, j, i, ' ');
/***** show header and message */
mvwaddstr(channelscr, 1, 2, "Warning!");
mvwaddstr(channelscr, 5, 2, "Failed to open sound device!!");
mvwaddstrcntr(channelscr, 8, width, "Press any key to return to menu ...");
wmove(channelscr, 1, 11); /***** set cursor to an appropriate location */
wrefresh (channelscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
retval = 0; /***** set return value to ERROR */
goto estimateChannelMeanReturn;
}
result = calculateChannelMean(); /***** calculate the characteristics of the recording channel */
closeAudio(); /***** disconnect from the microphone */
/***** clear dialog */
for (i = 1; i < width-1; i++)
mvwaddch(channelscr, 1, i, ' ');
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(channelscr, j, i, ' ');
if (result == AUDIO_ERR)
{
/***** if an error occurred during the calculation of the channel mean ... */
retval = 0; /***** set return value to ERROR */
/***** dialog header and message */
mvwaddstr(channelscr, 1, 2, "Error!");
mvwaddstr(channelscr, 3, 2, "I didn't manage to estimate the channel");
mvwaddstr(channelscr, 4, 2, "characteristics for some unknown reason!");
mvwaddstr(channelscr, 5, 2, "Make sure that no application uses the");
mvwaddstr(channelscr, 6, 2, "sound card and then try again!");
mvwaddstrcntr(channelscr, 8, width, "Press any key to return to menu ...");
wmove(channelscr, 1, 9); /***** set cursor to an appropriate location */
wrefresh (channelscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
}
else /***** channel mean calculation was ok */
{
retval = 1; /***** set return value to ok */
/***** dialog header and message */
mvwaddstr(channelscr, 1, 2, "Success!");
mvwaddstr(channelscr, 4, 2, "You may stop talking now! The channel");
mvwaddstr(channelscr, 5, 2, "characteristics have been estimated!");
mvwaddstrcntr(channelscr, 8, width, "Press any key to return to menu ...");
wmove(channelscr, 1, 11); /***** set cursor to an appropriate location */
wrefresh (channelscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
}
estimateChannelMeanReturn:
delwin(channelscr); /***** delete ncurses dialog window */
return(retval);
}
int calculateThresholds()
{
int samples;
int max = 0, value;
int silence_level_tmp; /***** need int (instead of short) to sum up several values */
int silence_max;
int retval = 0; /***** return value */
int width = 45, height = 11, i, j; /***** ncurses related variables */
WINDOW *threshscr = popupWindow (width, height);
/*****
* first step: define silence level
*****/
wattrset (threshscr, color_term ? COLOR_PAIR(2) | A_BOLD : A_NORMAL); /***** set bg color of the dialog */
/*****
* draw a box around the dialog window
* and empty it.
*****/
werase (threshscr);
box (threshscr, 0, 0);
for (i = 1; i < width-1; i++)
for (j = 1; j < height-1; j++)
mvwaddch(threshscr, j, i, ' ');
/***** dialog header */
mvwaddstr(threshscr, 1, 2, "Calculate Thresholds:");
mvwaddseparator(threshscr, 2, width);
/***** dialog message */
mvwaddstr(threshscr, 3, 2, "I'll calculate some values now. First,");
mvwaddstr(threshscr, 4, 2, "I need to know the silence level of the");
mvwaddstr(threshscr, 5, 2, "microphone. Please be silent until I");
mvwaddstr(threshscr, 6, 2, "say I'm done:");
mvwaddstrcntr(threshscr, 8, width, "Press any key to start ...");
wmove(threshscr, 1, 24); /***** set cursor to an appropriate location */
wrefresh (threshscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
/***** clear dialog window */
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(threshscr, j, i, ' ');
mvwaddstrcntr(threshscr, 5, width, "stand by ..."); /***** update dialog */
wmove(threshscr, 1, 24); /***** set cursor to an appropriate location */
wrefresh (threshscr); /***** refresh the dialog */
if (openAudio() == AUDIO_ERR)
{
/*****
* if the audio device could not be opened,
* show a warning dialog and return to main menu
*****/
/***** clear dialog */
for (i = 1; i < width-1; i++)
mvwaddch(threshscr, 1, i, ' ');
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(threshscr, j, i, ' ');
/***** show header and message */
mvwaddstr(threshscr, 1, 2, "Warning!");
mvwaddstr(threshscr, 5, 2, "Failed to open sound device!!");
mvwaddstrcntr(threshscr, 8, width, "Press any key to return to menu ...");
wmove(threshscr, 1, 11); /***** set cursor to an appropriate location */
wrefresh (threshscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
retval = 0; /***** set return value to ERROR */
goto calculateThresholdsReturn;
}
/*****
* define the silence_level as the average of a specified number
* of subsequent block maxima
*****/
samples = 40;
silence_level_tmp = 0;
silence_max = 0;
for (i = 0; i < samples; i++)
{
int value = getBlockMax(); /***** should check for value == -1 (case of an error!) */
silence_level_tmp += value;
if (value > silence_max)
silence_max = value;
}
silence_level_tmp /= samples;
silence_level = silence_level_tmp;
/***** rec_level and stop_level */
/***** clear dialog */
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(threshscr, j, i, ' ');
/***** update dialog */
mvwaddstr(threshscr, 3, 2, "Now, I'll define the thresholds at which");
mvwaddstr(threshscr, 4, 2, "to start/stop recording. Please talk");
mvwaddstr(threshscr, 5, 2, "at a conversational volume (speech");
mvwaddstr(threshscr, 6, 2, "recognition volume) until I say stop!");
mvwaddstrcntr(threshscr, 8, width, "Press any key to start ...");
wmove(threshscr, 1, 24); /***** set cursor to an appropriate location */
wrefresh (threshscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
/***** clear dialog */
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(threshscr, j, i, ' ');
mvwaddstrcntr(threshscr, 5, width, "keep on talking ..."); /***** update dialog */
wmove(threshscr, 1, 24); /***** set cursor to an appropriate location */
wrefresh (threshscr); /***** refresh the dialog */
/***** get maximum value 'max' of a prespecified number of subsequent block maxima */
samples = 80;
for (i = 0; i < samples; i++)
{
value = getBlockMax(); /***** should check for value == -1 (case of an error!) */
if (value > max)
max = value;
}
/***** set the rec_level to be the average of silence_level and 'max' */
/***** set the stop_level to be three quarters of silence_level plus one quarter of 'max' */
rec_level = (silence_level + max) / 2;
stop_level = (3*silence_level + max) / 4;
closeAudio(); /***** disconnect from microphone */
/***** clear dialog */
for (i = 1; i < width-1; i++)
mvwaddch(threshscr, 1, i, ' ');
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(threshscr, j, i, ' ');
/***** check that the thresholds are reasonable */
if (silence_level >= stop_level ||
silence_max >= stop_level ||
silence_level < 0 || stop_level < 0 || rec_level < 0)
{
/***** dialog header */
mvwaddstr(threshscr, 1, 2, "Warning!");
/***** dialog message */
mvwaddstr(threshscr, 4, 2, "You have to run this step once again!");
mvwaddstr(threshscr, 5, 2, "The calculated thresholds don't look");
mvwaddstr(threshscr, 6, 2, "reasonable to me!");
mvwaddstrcntr(threshscr, 8, width, "Press any key to return to menu ...");
wmove(threshscr, 1, 11); /***** set cursor to an appropriate location */
wrefresh (threshscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
retval = 0;
}
else /***** the values seem ok */
{
/***** dialog header */
mvwaddstr(threshscr, 1, 2, "Success!");
/***** dialog message */
mvwaddstr(threshscr, 4, 2, "You may stop talking now! The thresholds");
mvwaddstr(threshscr, 5, 2, "have been defined!");
/* Debugging stuff:
mvwaddint(threshscr, 6, 2, silence_level);
mvwaddint(threshscr, 6,10, stop_level);
mvwaddint(threshscr, 6,20, rec_level);
*/
mvwaddstrcntr(threshscr, 8, width, "Press any key to return to menu ...");
wmove(threshscr, 1, 11); /***** set cursor to an appropriate location */
wrefresh (threshscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
retval = 1; /***** set return value = ok */
}
calculateThresholdsReturn:
delwin(threshscr); /***** delete ncurses dialog window */
return(retval);
}
int adjustMixerLevels()
{
int mic_level = 99; /***** initial values for Microphone and */
int igain_level = 0; /***** Input Gain level */
int max_sample = 32500; /***** max 16-bit sample value coming from the sound card */
int count; /**** temporary variables */
int max_gain;
char tmp_string[10];
int width = 45, height = 11, i, j; /***** ncurses related variables */
WINDOW *adjustscr = popupWindow (width, height);
int retval = 0; /***** return value */
/* ***** display information */
wattrset (adjustscr, color_term ? COLOR_PAIR(2) | A_BOLD : A_NORMAL); /***** set bg color of the dialog */
/*****
* draw a box around the dialog window
* and empty it.
*****/
werase (adjustscr);
box (adjustscr, 0, 0);
for (i = 1; i < width-1; i++)
for (j = 1; j < height-1; j++)
mvwaddch(adjustscr, j, i, ' ');
setMicLevel(mic_level);
if (mixerHasIGain() == MIXER_OK)
{
igain_level = 1;
setIGainLevel(igain_level); /***** set initial levels in mixer */
}
else
goto no_igain;
/***** dialog header */
mvwaddstr(adjustscr, 1, 2, "Adjust Input Gain Level:");
mvwaddseparator(adjustscr, 2, width);
/***** dialog message */
mvwaddstr(adjustscr, 3, 2, "Please grab your microphone and speak");
mvwaddstr(adjustscr, 4, 2, "nonsense at a conversational volume");
mvwaddstr(adjustscr, 5, 2, "(speech recognition volume) until I");
mvwaddstr(adjustscr, 6, 2, "say stop:");
mvwaddstrcntr(adjustscr, 8, width, "Press any key to start ...");
wmove(adjustscr, 1, 27); /***** set cursor to an appropriate location */
wrefresh (adjustscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
/***** update dialog */
mvwaddstr(adjustscr, 8, 2, "Current Gain Level: ");
sprintf(tmp_string, "%d", igain_level);
mvwaddstr(adjustscr, 8, 22, tmp_string);
wmove(adjustscr, 1, 27); /***** set cursor to an appropriate location */
wrefresh (adjustscr); /***** refresh the dialog */
count = 0;
max_gain = 0;
if (openAudio() == AUDIO_ERR)
{
/*****
* if the audio device could not be opened,
* show a warning dialog and return to main menu
*****/
/***** empty dialog */
for (i = 1; i < width-1; i++)
mvwaddch(adjustscr, 1, i, ' ');
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(adjustscr, j, i, ' ');
/***** show header and message */
mvwaddstr(adjustscr, 1, 2, "Warning!");
mvwaddstr(adjustscr, 5, 2, "Failed to open sound device!!");
mvwaddstrcntr(adjustscr, 8, width, "Press any key to return to menu ...");
wmove(adjustscr, 1, 11); /***** set cursor to an appropriate location */
wrefresh (adjustscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
retval = 0; /***** set return value to ERROR */
goto adjustMixerLevelsReturn;
}
/***** repeat until the input gain level has been adjusted properly */
while (1)
{
int max; /***** maximum sample value in a sequence of audio samples */
int samples = 10; /***** number of blocks to get from the audio device */
count++;
/*****
* get the maximum values of 'samples' blocks of data from the sound card
* the maximum of these values is stored in 'max'9
*****/
max = 0;
for (i = 0; i < samples; i++)
{
int value = getBlockMax(); /***** should check for value == -1 (case of an error!) */
if (value > max)
max = value;
}
/***** max_gain holds the highest maximum sample found */
if (max > max_gain)
max_gain = max;
if (count == 5) /***** after five iterations, check the value of 'max_gain' */
{
/*****
* if max_gain is too low (i.e. it is between silence and low_volume)
* the input gain level is increased
*****/
if (max_gain >= silence * max_sample && max_gain < low_volume * max_sample)
{
igain_level++;
if (igain_level > 99)
igain_level = 99;
setIGainLevel(igain_level);
sprintf(tmp_string, "%d", igain_level); /***** update display of igain level */
mvwaddstr(adjustscr, 8, 22, tmp_string);
wmove(adjustscr, 1, 27); /***** set cursor to an appropriate location */
wrefresh (adjustscr); /***** refresh the dialog */
}
/*****
* if the level is above 'low_volume'
* we assume that the input gain is high enough and break the current while loop
*****/
else if (max_gain >= low_volume * max_sample)
break;
/***** reset count and max_gain */
count = 0;
max_gain = 0;
}
}
closeAudio(); /***** disconnect from microphone */
/***** update dialog window */
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(adjustscr, j, i, ' ');
mvwaddstrcntr(adjustscr, 5, width, "STOP!!");
mvwaddstrcntr(adjustscr, 8, width, "Press any key to continue ...");
wmove(adjustscr, 1, 27); /***** set cursor to an appropriate location */
wrefresh (adjustscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
no_igain:
count = 0; /***** reset count */
/***** adjusting microphone level */
/***** dialog header */
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(adjustscr, j, i, ' ');
mvwaddstr(adjustscr, 1, 2, "Adjust Microphone Level:");
/***** dialog message */
mvwaddstr(adjustscr, 3, 2, "Please grab your microphone and speak");
mvwaddstr(adjustscr, 4, 2, "very loudly (laughing loudly is good)");
mvwaddstr(adjustscr, 5, 2, "until I say stop:");
mvwaddstrcntr(adjustscr, 8, width, "Press any key to start ...");
wmove(adjustscr, 1, 27); /***** set cursor to an appropriate location */
wrefresh (adjustscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
/***** update dialog */
mvwaddstr(adjustscr, 8, 2, "Current Microphone Level: ");
sprintf(tmp_string, "%d", mic_level);
mvwaddstr(adjustscr, 8, 28, tmp_string);
wmove(adjustscr, 1, 27); /***** set cursor to an appropriate location */
wrefresh (adjustscr); /***** refresh the dialog */
if (openAudio() == AUDIO_ERR)
{
/*****
* if the audio device could not be opened,
* show a warning dialog and return to main menu
*****/
/***** empty dialog */
for (i = 1; i < width-1; i++)
mvwaddch(adjustscr, 1, i, ' ');
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(adjustscr, j, i, ' ');
/***** show header and message */
mvwaddstr(adjustscr, 1, 2, "Warning!");
mvwaddstr(adjustscr, 5, 2, "Failed to open sound device!!");
mvwaddstrcntr(adjustscr, 8, width, "Press any key to return to menu ...");
wmove(adjustscr, 1, 11); /***** set cursor to an appropriate location */
wrefresh (adjustscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
retval = 0; /***** set return value to ERROR */
goto adjustMixerLevelsReturn;
}
/***** repeat until the microphone level has been adjusted properly */
while (1)
{
int max; /***** maximum sample value in a sequence of audio samples */
int samples = 4; /***** number of blocks to get from the audio device */
/*****
* get the maximum values of 'samples' blocks of data from the sound card
* the maximum of these values is stored in 'max'9
*****/
max = 0;
for (i = 0; i < samples; i++)
{
int value = getBlockMax(); /***** should check for value == -1 (case of an error!) */
if (value > max)
max = value;
}
if (max >= high_volume * max_sample)
{
/*****
* if max is too high (i.e. above high_volume)
* the microphone level is dereased
*****/
mic_level -= 1;
if (mic_level < 5)
mic_level = 5;
setMicLevel(mic_level);
count = 0; /***** reset count */
sprintf(tmp_string, "%d", mic_level); /***** update display of mic level */
mvwaddstr(adjustscr, 8, 28, tmp_string);
wmove(adjustscr, 1, 27); /***** set cursor to an appropriate location */
wrefresh (adjustscr); /***** refresh the dialog */
}
else if (max >= silence * max_sample)
{
/*****
* if there is a signal above silence coming in,
* increase count
* if count >= a specified constant, we assume that
* the microphone level is not too high any more and
* thus, break the while loop
****/
count++;
if (count >= 20)
break;
}
else
{
/*****
* this was a silence frame, decrease count if it is > 0
*****/
if (count > 0)
count--;
}
}
closeAudio(); /***** disconnect from microphone */
/***** clear dialog window */
for (i = 1; i < width-1; i++)
mvwaddch(adjustscr, 1, i, ' ');
for (i = 1; i < width-1; i++)
for (j = 3; j < height-1; j++)
mvwaddch(adjustscr, j, i, ' ');
/***** check the mixer values, to make sure they look reasonable */
if (igain_level >= mic_level ||
mic_level < MIN_REASONABLE_MIC_LEVEL ||
igain_level > MAX_REASONABLE_IGAIN_LEVEL)
{
int pos = 0;
/***** dialog header */
mvwaddstr(adjustscr, 1, 2, "Warning!");
/***** dialog message */
mvwaddstr(adjustscr, 3, 2, "You have to run this step once again!");
mvwaddstr(adjustscr, 4, 2, "The estimated level results don't look");
mvwaddstr(adjustscr, 5, 2, "reasonable to me!");
if (igain_level >= mic_level || igain_level > MAX_REASONABLE_IGAIN_LEVEL)
mvwaddstr(adjustscr, 6+(pos++), 2, "- Input gain level looks too high!");
if (igain_level >= mic_level || mic_level < MIN_REASONABLE_MIC_LEVEL)
mvwaddstr(adjustscr, 6+(pos++), 2, "- Microphone level looks too low?!");
mvwaddstrcntr(adjustscr, 8, width, "Press any key to return to menu ...");
wmove(adjustscr, 1, 11); /***** set cursor to an appropriate location */
wrefresh (adjustscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
retval = 0;
}
else /***** the mixer values seem ok */
{
/***** dialog header */
mvwaddstr(adjustscr, 1, 2, "Success!");
/***** dialog message */
mvwaddstrcntr(adjustscr, 4, width, "The mixer levels have been");
mvwaddstrcntr(adjustscr, 5, width, "adjusted successfully!");
mvwaddstrcntr(adjustscr, 8, width, "Press any key to return to menu ...");
wmove(adjustscr, 1, 11); /***** set cursor to an appropriate location */
wrefresh (adjustscr); /***** refresh the dialog */
getch(); /***** wait for keyboard reaction */
retval = 1; /***** set return value = ok */
}
adjustMixerLevelsReturn:
delwin(adjustscr); /***** delete ncurses dialog window */
return(retval);
}
// setup libAV related structs.
bool AV::setupAV() {
ct.of = av_guess_format(NULL, "roxlu.flv", NULL);
if(!ct.of) {
printf("Cannot create flv AVOutputFormat\n");
return false;
}
ct.c = avformat_alloc_context();
if(!ct.c) {
printf("Cannot allocate the AVFormatContext\n");
return false;
}
ct.c->video_codec_id = CODEC_ID_H264;
ct.c->debug = 3;
ct.c->oformat = ct.of;
// const char* output_filename = "tcp://127.0.0.1:6665";
// const char* output_filename = "rtmp://gethinlewis.rtmphost.com";
const char* output_filename = "rtmp://gethinlewis.rtmphost.com/event/_definst_";
// const char* output_filename = "test.flv";
snprintf(ct.c->filename, sizeof(ct.c->filename), "%s", output_filename);
//ct.vs = addVideoStream(ct, ct.of->video_codec);
printf("%d -- %d \n", CODEC_ID_H264, ct.of->video_codec);
ct.of->video_codec = CODEC_ID_H264;
ct.vs = addVideoStream(ct, ct.of->video_codec);
if(!ct.vs) {
printf("Cannot create video stream: %d.\n", ct.of->video_codec);
return false;
}
if(!openVideo(ct)) {
printf("Cannot open video stream.\n");
return false;
}
//av_dict_set(&ct.c->metadata, "streamName", "video_test", 0);
av_dict_set(&ct.c->metadata, "streamName", "livefeed", 0);
if(use_audio) {
bool use_mp3 = true;
if(!use_mp3) {
ct.asample_fmt = AV_SAMPLE_FMT_S16;
ct.abit_rate = 64000;
ct.asample_rate = 8000;
ct.as = addAudioStream(ct, CODEC_ID_SPEEX);
}
else {
ct.asample_fmt = AV_SAMPLE_FMT_S16;
ct.abit_rate = 64000;
ct.asample_rate = 44100;
ct.as = addAudioStream(ct, CODEC_ID_MP3);
}
if(!ct.as) {
printf("Cannot create audio stream.\n");
return false;
}
if(!openAudio(ct)) {
printf("Cannot open audio stream.\n");
return false;
}
}
av_dump_format(ct.c, 0, output_filename, 1);
if(!(ct.of->flags & AVFMT_NOFILE)) {
if(avio_open(&ct.c->pb, output_filename, AVIO_FLAG_WRITE) < 0) {
printf("Cannot open: %s\n", output_filename);
return false;
}
}
avformat_write_header(ct.c, NULL);
return true;
}
int EncoderFfmpegCore::initEncoder(int bitrate, int samplerate) {
#ifndef avformat_alloc_output_context2
qDebug() << "EncoderFfmpegCore::initEncoder: Old Style initialization";
m_pEncodeFormatCtx = avformat_alloc_context();
#endif
m_lBitrate = bitrate * 1000;
m_lSampleRate = samplerate;
#if LIBAVCODEC_VERSION_INT > 3544932
if (m_SCcodecId == AV_CODEC_ID_MP3) {
#else
if (m_SCcodecId == CODEC_ID_MP3) {
#endif // LIBAVCODEC_VERSION_INT > 3544932
qDebug() << "EncoderFfmpegCore::initEncoder: Codec MP3";
#ifdef avformat_alloc_output_context2
avformat_alloc_output_context2(&m_pEncodeFormatCtx, NULL, NULL, "output.mp3");
#else
m_pEncoderFormat = av_guess_format(NULL, "output.mp3", NULL);
#endif // avformat_alloc_output_context2
#if LIBAVCODEC_VERSION_INT > 3544932
} else if (m_SCcodecId == AV_CODEC_ID_AAC) {
#else
} else if (m_SCcodecId == CODEC_ID_AAC) {
#endif // LIBAVCODEC_VERSION_INT > 3544932
qDebug() << "EncoderFfmpegCore::initEncoder: Codec M4A";
#ifdef avformat_alloc_output_context2
avformat_alloc_output_context2(&m_pEncodeFormatCtx, NULL, NULL, "output.m4a");
#else
m_pEncoderFormat = av_guess_format(NULL, "output.m4a", NULL);
#endif // avformat_alloc_output_context2
} else {
qDebug() << "EncoderFfmpegCore::initEncoder: Codec OGG/Vorbis";
#ifdef avformat_alloc_output_context2
avformat_alloc_output_context2(&m_pEncodeFormatCtx, NULL, NULL, "output.ogg");
m_pEncodeFormatCtx->oformat->audio_codec=AV_CODEC_ID_VORBIS;
#else
m_pEncoderFormat = av_guess_format(NULL, "output.ogg", NULL);
#if LIBAVCODEC_VERSION_INT > 3544932
m_pEncoderFormat->audio_codec=AV_CODEC_ID_VORBIS;
#else
m_pEncoderFormat->audio_codec=CODEC_ID_VORBIS;
#endif // LIBAVCODEC_VERSION_INT > 3544932
#endif // avformat_alloc_output_context2
}
#ifdef avformat_alloc_output_context2
m_pEncoderFormat = m_pEncodeFormatCtx->oformat;
#else
m_pEncodeFormatCtx->oformat = m_pEncoderFormat;
#endif // avformat_alloc_output_context2
m_pEncoderAudioStream = addStream(m_pEncodeFormatCtx, &m_pEncoderAudioCodec,
m_pEncoderFormat->audio_codec);
openAudio(m_pEncoderAudioCodec, m_pEncoderAudioStream);
// qDebug() << "jepusti";
return 0;
}
// Private methods
int EncoderFfmpegCore::writeAudioFrame(AVFormatContext *formatctx,
AVStream *stream) {
AVCodecContext *l_SCodecCtx = NULL;;
AVPacket l_SPacket;
AVFrame *l_SFrame = avcodec_alloc_frame();
int l_iGotPacket;
int l_iRet;
#ifdef av_make_error_string
char l_strErrorBuff[256];
#endif // av_make_error_string
av_init_packet(&l_SPacket);
l_SPacket.size = 0;
l_SPacket.data = NULL;
// Calculate correct DTS for FFMPEG
m_lDts = round(((double)m_lRecordedBytes / (double)44100 / (double)2. *
(double)m_pEncoderAudioStream->time_base.den));
m_lPts = m_lDts;
l_SCodecCtx = stream->codec;
#ifdef av_make_error_string
memset(l_strErrorBuff, 0x00, 256);
#endif // av_make_error_string
l_SFrame->nb_samples = m_iAudioInputFrameSize;
// Mixxx uses float (32 bit) samples..
l_SFrame->format = AV_SAMPLE_FMT_FLT;
#ifndef __FFMPEGOLDAPI__
l_SFrame->channel_layout = l_SCodecCtx->channel_layout;
#endif // __FFMPEGOLDAPI__
l_iRet = avcodec_fill_audio_frame(l_SFrame,
l_SCodecCtx->channels,
AV_SAMPLE_FMT_FLT,
(const uint8_t *)m_pFltSamples,
m_iFltAudioCpyLen,
1);
if (l_iRet != 0) {
#ifdef av_make_error_string
qDebug() << "Can't fill FFMPEG frame: error " << l_iRet << "String '" <<
av_make_error_string(l_strErrorBuff, 256, l_iRet) << "'" <<
m_iFltAudioCpyLen;
#endif // av_make_error_string
qDebug() << "Can't refill 1st FFMPEG frame!";
return -1;
}
// If we have something else than AV_SAMPLE_FMT_FLT we have to convert it
// to something that fits..
if (l_SCodecCtx->sample_fmt != AV_SAMPLE_FMT_FLT) {
reSample(l_SFrame);
// After we have turned our samples to destination
// Format we must re-alloc l_SFrame.. it easier like this..
#if LIBAVCODEC_VERSION_INT > 3544932
avcodec_free_frame(&l_SFrame);
#else
av_free(l_SFrame);
#endif // LIBAVCODEC_VERSION_INT > 3544932
l_SFrame = NULL;
l_SFrame = avcodec_alloc_frame();
l_SFrame->nb_samples = m_iAudioInputFrameSize;
l_SFrame->format = l_SCodecCtx->sample_fmt;
#ifndef __FFMPEGOLDAPI__
l_SFrame->channel_layout = m_pEncoderAudioStream->codec->channel_layout;
#endif // __FFMPEGOLDAPI__
l_iRet = avcodec_fill_audio_frame(l_SFrame, l_SCodecCtx->channels,
l_SCodecCtx->sample_fmt,
(const uint8_t *)m_pResample->getBuffer(),
m_iAudioCpyLen,
1);
if (l_iRet != 0) {
#ifdef av_make_error_string
qDebug() << "Can't refill FFMPEG frame: error " << l_iRet << "String '" <<
av_make_error_string(l_strErrorBuff, 256,
l_iRet) << "'" << m_iAudioCpyLen <<
" " << av_samples_get_buffer_size(
NULL, 2,
m_iAudioInputFrameSize,
m_pEncoderAudioStream->codec->sample_fmt,
1) << " " << m_pOutSize;
#endif // av_make_error_string
qDebug() << "Can't refill 2nd FFMPEG frame!";
return -1;
}
}
//qDebug() << "!!" << l_iRet;
l_iRet = avcodec_encode_audio2(l_SCodecCtx, &l_SPacket, l_SFrame,
&l_iGotPacket);
if (l_iRet < 0) {
qDebug() << "Error encoding audio frame";
return -1;
}
if (!l_iGotPacket) {
// qDebug() << "No packet! Can't encode audio!!";
return -1;
}
l_SPacket.stream_index = stream->index;
// Let's calculate DTS/PTS and give it to FFMPEG..
// THEN codecs like OGG/Voris works ok!!
l_SPacket.dts = m_lDts;
l_SPacket.pts = m_lDts;
// Some times den is zero.. so 0 dived by 0 is
// Something?
if (m_pEncoderAudioStream->pts.den == 0) {
qDebug() << "Time hack!";
m_pEncoderAudioStream->pts.den = 1;
}
// Write the compressed frame to the media file. */
l_iRet = av_interleaved_write_frame(formatctx, &l_SPacket);
if (l_iRet != 0) {
qDebug() << "Error while writing audio frame";
return -1;
}
av_free_packet(&l_SPacket);
av_destruct_packet(&l_SPacket);
av_free(l_SFrame);
return 0;
}
/**
* Initialises OpenJazz.
*
* Establishes the paths from which to read files, loads configuration, sets up
* the game window and loads required data.
*
* @param argc Number of arguments, as passed to main function
* @param argv Array of argument strings, as passed to main function
*/
void startUp (int argc, char *argv[]) {
File* file;
unsigned char* pixels = NULL;
int count;
int screenW = DEFAULT_SCREEN_WIDTH;
int screenH = DEFAULT_SCREEN_HEIGHT;
int scaleFactor = 1;
#ifdef FULLSCREEN_ONLY
bool fullscreen = true;
#else
bool fullscreen = false;
#endif
// Determine paths
// Use hard-coded paths, if available
#ifdef DATAPATH
firstPath = new Path(NULL, createString(DATAPATH));
#else
firstPath = NULL;
#endif
#ifdef __HAIKU__
dev_t volume = dev_for_path("/boot");
char buffer[10 + B_PATH_NAME_LENGTH + B_FILE_NAME_LENGTH];
status_t result;
result = find_directory(B_SYSTEM_DATA_DIRECTORY,
volume, false, buffer, sizeof(buffer));
strncat(buffer, "/openjazz/", sizeof(buffer));
firstPath = new Path(firstPath, createString(buffer));
result = find_directory(B_USER_NONPACKAGED_DATA_DIRECTORY,
volume, false, buffer, sizeof(buffer));
strncat(buffer, "/openjazz/", sizeof(buffer));
firstPath = new Path(firstPath, createString(buffer));
#endif
#ifdef __SYMBIAN32__
#ifdef UIQ3
firstPath = new Path(firstPath, createString("c:\\shared\\openjazz\\"));
#else
firstPath = new Path(firstPath, createString("c:\\data\\openjazz\\"));
#endif
firstPath = new Path(firstPath, createString(KOpenJazzPath));
#endif
// Use any provided paths, appending a directory separator as necessary
for (count = 1; count < argc; count++) {
// If it isn't an option, it should be a path
if (argv[count][0] != '-') {
#ifdef _WIN32
if (argv[count][strlen(argv[count]) - 1] != '\\') {
firstPath = new Path(firstPath, createString(argv[count], "\\"));
#else
if (argv[count][strlen(argv[count]) - 1] != '/') {
firstPath = new Path(firstPath, createString(argv[count], "/"));
#endif
} else {
firstPath = new Path(firstPath, createString(argv[count]));
}
}
}
// Use the path of the program, but not on Wii as this does crash in
// dolphin emulator. Also is not needed, because CWD is used there
#ifndef WII
count = strlen(argv[0]) - 1;
// Search for directory separator
#ifdef _WIN32
while ((argv[0][count] != '\\') && (count >= 0)) count--;
#else
while ((argv[0][count] != '/') && (count >= 0)) count--;
#endif
// If a directory was found, copy it to the path
if (count > 0) {
firstPath = new Path(firstPath, new char[count + 2]);
memcpy(firstPath->path, argv[0], count + 1);
firstPath->path[count + 1] = 0;
}
#endif
// Use the user's home directory, if available
#ifdef HOMEDIR
#ifdef _WIN32
firstPath = new Path(firstPath, createString(getenv("HOME"), "\\"));
#else
firstPath = new Path(firstPath, createString(getenv("HOME"), "/."));
#endif
#endif
// Use the current working directory
firstPath = new Path(firstPath, createString(""));
// Default settings
// Sound settings
#if defined(WIZ) || defined(GP2X)
volume = 40;
#endif
// Create the network address
netAddress = createString(NET_ADDRESS);
// Load settings from config file
setup.load(&screenW, &screenH, &fullscreen, &scaleFactor);
// Get command-line override
for (count = 1; count < argc; count++) {
// If there's a hyphen, it should be an option
if (argv[count][0] == '-') {
#ifndef FULLSCREEN_ONLY
if (argv[count][1] == 'f') fullscreen = true;
#endif
if (argv[count][1] == 'm') {
setMusicVolume(0);
setSoundVolume(0);
}
}
}
// Create the game's window
canvas = NULL;
if (!video.init(screenW, screenH, fullscreen)) {
delete firstPath;
throw E_VIDEO;
}
#ifdef SCALE
video.setScaleFactor(scaleFactor);
#endif
if (SDL_NumJoysticks() > 0) SDL_JoystickOpen(0);
// Set up audio
openAudio();
// Load fonts
// Open the panel, which contains two fonts
try {
file = new File("PANEL.000", false);
} catch (int e) {
closeAudio();
delete firstPath;
log("Unable to find game data files. When launching OpenJazz, pass the location");
log("of the original game data, eg:");
log(" OpenJazz ~/jazz1");
#ifdef __HAIKU__
char alertBuffer[100+B_PATH_NAME_LENGTH+B_FILE_NAME_LENGTH];
strcpy(alertBuffer, "Unable to find game data files!\n"
"Put the data into the folder:\n");
strncat(alertBuffer, buffer, sizeof(alertBuffer));
BAlert* alert = new BAlert("OpenJazz", alertBuffer, "Exit", NULL, NULL,
B_WIDTH_AS_USUAL, B_STOP_ALERT);
alert->Go();
#endif
throw e;
}
pixels = file->loadRLE(46272);
delete file;
panelBigFont = NULL;
panelSmallFont = NULL;
font2 = NULL;
fontbig = NULL;
fontiny = NULL;
fontmn1 = NULL;
try {
panelBigFont = new Font(pixels + (40 * 320), true);
panelSmallFont = new Font(pixels + (48 * 320), false);
font2 = new Font("FONT2.0FN");
fontbig = new Font("FONTBIG.0FN");
fontiny = new Font("FONTINY.0FN");
fontmn1 = new Font("FONTMN1.0FN");
fontmn2 = new Font("FONTMN2.0FN");
} catch (int e) {
if (panelBigFont) delete panelBigFont;
if (panelSmallFont) delete panelSmallFont;
if (font2) delete font2;
if (fontbig) delete fontbig;
if (fontiny) delete fontiny;
if (fontmn1) delete fontmn1;
delete[] pixels;
closeAudio();
delete firstPath;
throw e;
}
delete[] pixels;
// Establish arbitrary timing
globalTicks = SDL_GetTicks() - 20;
// Fill trigonometric function look-up tables
for (count = 0; count < 1024; count++)
sinLut[count] = fixed(sinf(2 * PI * float(count) / 1024.0f) * 1024.0f);
// Initiate networking
net = new Network();
level = NULL;
jj2Level = NULL;
}
/**
* De-initialises OpenJazz.
*
* Frees data, writes configuration, and shuts down SDL.
*/
void shutDown () {
delete net;
delete panelBigFont;
delete panelSmallFont;
delete font2;
delete fontbig;
delete fontiny;
delete fontmn1;
delete fontmn2;
#ifdef SCALE
if (video.getScaleFactor() > 1) SDL_FreeSurface(canvas);
#endif
closeAudio();
// Save settings to config file
setup.save();
delete firstPath;
}
ModelItemSample *recordSample()
{
/***** allocate memory for the new sample */
ModelItemSample *new_sample = (ModelItemSample *)malloc(sizeof(ModelItemSample));
char *tmp_string;
time_t timer; /***** used to get the current time, which will become */
time(&timer); /***** the main part of the new utterance's ID */
/***** initialize the audio device */
if (initMixer() == MIXER_ERR) /***** if mixer error, return nothing */
{
free(new_sample);
return NULL;
}
if (igain_level > 0)
setIGainLevel(igain_level); /***** set IGain and Mic level according */
setMicLevel(mic_level); /***** to configuration */
if (initAudio() == AUDIO_ERR) /***** if audio error, return nothing */
{
free(new_sample);
return NULL;
}
/***** connect to microphone, get utterance, disconnect */
openAudio();
new_sample->wav_data = getUtterance(&new_sample->wav_length);
closeAudio();
if (new_sample->wav_data == NULL) /***** if nothing was recorded, return nothing */
{
new_sample->wav_length = 0;
new_sample->has_wav = 0;
free(new_sample);
return NULL;
}
else
/***** flag says that this sample utterance also contains its original
* wave data, not only the preprocessed feature vectors
*****/
new_sample->has_wav = 1;
/***** preprocess the wave data */
new_sample->data = preprocessUtterance(new_sample->wav_data, new_sample->wav_length, &new_sample->length);
if (new_sample->data == NULL) /***** if preprocessing failed, return nothing */
{
new_sample->length = 0;
free(new_sample->wav_data);
free(new_sample);
return NULL;
}
/***** set ID */
tmp_string = ctime(&timer); /***** get current time */
/***** set sample ID looks like: [Thu Feb 10 12:10:53 2000] */
new_sample->id = malloc(strlen(tmp_string)+2);
new_sample->id[0] = '[';
strcpy(new_sample->id+1, tmp_string);
new_sample->id[strlen(tmp_string)] = ']';
new_sample->next = NULL; /***** next sample pointer is NULL */
{
int i;
for (i = 0; i < 3; i++)
new_sample->matrix[i] = NULL;
}
modified = 1; /***** speaker model has been modified now */
return(new_sample);
}
