//*********************************************************************************************
//function one byte read //
//argument device group information //
//return read byte //
//*********************************************************************************************
uint8_t owi_read_byte(sGrpDev* pGrpDev)
{
uint8_t i,result = 0;
for(i=0;i<8;i++)
if(owi_read_bit(pGrpDev)) result |= 1<<i;
return result;
}
////////////////////////////////////////////////////////////////////////////////////
//
// uint8_t owi_receive_byte(gpio_pin_id_t owi_pin_id)
//
// Description:
// This function automates the task of receiving a complete byte of data from the OWI
//
// Parameters:
// gpio_pin_id_t owi_pin_id - ID of the OWI pin
//
// Return value:
// uint8_t - The byte read from the OWI
//
////////////////////////////////////////////////////////////////////////////////////
uint8_t owi_receive_byte(gpio_pin_id_t owi_pin_id)
{
// Clear the input variable.
register uint8_t mask = 0x01;
register uint8_t data = 0x00;
// Do once for each bit
do
{
// Set the msb if a '1' value is read from the bus.
// Leave as it is ('0') else.
if (owi_read_bit(owi_pin_id))
{
// Set current bit
data |= mask;
}
// Left shift the mask.
mask <<= 1;
}
while (mask);
return data;
}
////////////////////////////////////////////////////////////////////////////////////
//
// void owi_search_rom(gpio_pin_id_t owi_pin_id, uint8_t * ptr_rom, uint8_t last)
//
// Description:
// Sends the SEARCH ROM command and returns 1 id found on the OWI
//
// Parameters:
// gpio_pin_id_t owi_pin_id - ID of the OWI pin
// uint8_t * ptr_rom - A pointer to an 8 byte char array where the
// discovered identifier will be placed. When
// searching for several slaves, a copy of the
// last found identifier should be supplied in
// the array, or the search will fail
// uint8_t last_bit - The bit position where the algorithm made a
// choice the last time it was run. This argument
// should be 0 when a search is initiated. Supplying
// the return argument of this function when calling
// repeatedly will go through the complete slave
// search.
//
// Return value:
// uint8_t - The last bit position where there was a discrepancy between
// slave addresses the last time this function was run.
// Returns OWI_SEARCH_ROM_FAILED if an error was detected
// (e.g. a device was connected to the bus during the search),
// or OWI_SEARCH_ROM_FINISHED when there are no more
// devices to be discovered.
//
////////////////////////////////////////////////////////////////////////////////////
uint8_t owi_search_rom(gpio_pin_id_t owi_pin_id, uint8_t * ptr_rom, uint8_t last_bit)
{
uint8_t bit, bit_a, bit_b;
uint8_t next_bit = 0x00;
uint8_t mask = 0x01;
// Send SEARCH ROM command on the bus.
owi_send_byte(owi_pin_id, OWI_SEARCH_ROM);
// Walk through all 64 bits.
for (bit = 1; bit <= 64; bit++)
{
// Read bit from bus twice.
bit_a = owi_read_bit(owi_pin_id);
bit_b = owi_read_bit(owi_pin_id);
if (bit_a && bit_b)
{
// Both bits 1 (Error).
return OWI_SEARCH_ROM_FAILED;
}
else if (bit_a ^ bit_b)
{
// Bits A and B are different. All devices have the same bit here.
// Set the bit in ROM to this value.
if (bit_a)
{
(*ptr_rom) |= mask;
}
else
{
(*ptr_rom) &= ~mask;
}
}
else // Both bits 0
{
// If this is where a choice was made the last time,
// a '1' bit is selected this time.
if (bit == last_bit)
{
(*ptr_rom) |= mask;
}
// For the rest of the ROM, '0' bits are selected when
// discrepancies occur.
else if (bit > last_bit)
{
(*ptr_rom) &= ~mask;
next_bit = bit;
}
// If current bit in bit pattern = 0, then this is
// out new deviation.
else if (!(*ptr_rom & mask))
{
next_bit = bit;
}
}
// Send the selected bit to the bus.
if ((*ptr_rom) & mask)
{
owi_write_bit_1(owi_pin_id);
}
else
{
owi_write_bit_0(owi_pin_id);
}
// Adjust mask and ROM pointer.
mask <<= 1;
if (!mask)
{
mask = 0x01;
ptr_rom++;
}
}
return next_bit;
}