Ejemplos de pcibios_enable_device en C++ (Cpp)

Ejemplo n.º 1

static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
{
	u8 lat;

	if (dev->bus->ops != &ssb_pcicore_pciops) {
		
		return;
	}
	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
		return;

	ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));

	
	pci_set_master(dev);
	if (pcibios_enable_device(dev, ~0) < 0) {
		ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
		return;
	}

	
	pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);

	
	lat = 168;
	ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
		   pci_name(dev), lat);
	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}

Ejemplo n.º 2

/* Early PCI fixup for a device on the PCI-core bridge. */
static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
{
	u8 lat;

	if (dev->bus->ops != &ssb_pcicore_pciops) {
		/* This is not a device on the PCI-core bridge. */
		return;
	}
	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
		return;

	ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));

	/* Enable PCI bridge bus mastering and memory space */
	pci_set_master(dev);
	if (pcibios_enable_device(dev, ~0) < 0) {
		ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
		return;
	}

	/* Enable PCI bridge BAR1 prefetch and burst */
	pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);

	/* Make sure our latency is high enough to handle the devices behind us */
	lat = 168;
	ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
		   pci_name(dev), lat);
	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}

Ejemplo n.º 3

Archivo: driver_pcicore.c Proyecto: Cribstone/linino

static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
{
	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
		return;

	ssb_printk(KERN_INFO "PCI: fixing up bridge\n");

	/* Enable PCI bridge bus mastering and memory space */
	pci_set_master(dev);
	pcibios_enable_device(dev, ~0);

	/* Enable PCI bridge BAR1 prefetch and burst */
	pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);

	/* Make sure our latency is high enough to handle the devices behind us */
	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8);
}

Ejemplo n.º 4

Archivo: driver_pci_host.c Proyecto: schidler/RT5350

/* Early PCI fixup for a device on the PCI-core bridge. */
static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev)
{
    if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
        /* This is not a device on the PCI-core bridge. */
        return;
    }
    if (PCI_SLOT(dev->devfn) != 0)
        return;

    pr_info("PCI: Fixing up bridge %s\n", pci_name(dev));

    /* Enable PCI bridge bus mastering and memory space */
    pci_set_master(dev);
    if (pcibios_enable_device(dev, ~0) < 0) {
        pr_err("PCI: BCMA bridge enable failed\n");
        return;
    }

    /* Enable PCI bridge BAR1 prefetch and burst */
    pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3);
}