Ejemplos de pm8xxx_spk_config en C++ (Cpp)

Ejemplo n.º 1

static int __devinit pm8xxx_spk_probe(struct platform_device *pdev)
{
	const struct pm8xxx_spk_platform_data *pdata = pdev->dev.platform_data;
	int ret = 0;

	if (!pdata) {
		pr_err("missing platform data\n");
		return -EINVAL;
	}

	the_spk_chip = kzalloc(sizeof(struct pm8xxx_spk_chip), GFP_KERNEL);
	if (the_spk_chip == NULL) {
		pr_err("kzalloc() failed.\n");
		return -ENOMEM;
	}

	mutex_init(&the_spk_chip->spk_mutex);

	the_spk_chip->dev = &pdev->dev;
	the_spk_chip->version = pm8xxx_get_version(the_spk_chip->dev->parent);
	switch (pm8xxx_get_version(the_spk_chip->dev->parent)) {
	case PM8XXX_VERSION_8038:
		break;
	default:
		ret = -ENODEV;
		goto err_handle;
	}

	memcpy(&(the_spk_chip->pdata), pdata,
			sizeof(struct pm8xxx_spk_platform_data));

	the_spk_chip->base = pdev->resource[0].start;
	the_spk_chip->end = pdev->resource[0].end;

	if (the_spk_chip->pdata.spk_add_enable) {
		int val;
		val = pm8xxx_spk_read(PM8XXX_SPK_CTL1_REG_OFF);
		if (val < 0) {
			ret = val;
			goto err_handle;
		}
		val |= (the_spk_chip->pdata.spk_add_enable & PM8XXX_ADD_EN);
		ret = pm8xxx_spk_write(PM8XXX_SPK_CTL1_REG_OFF, val);
		if (ret < 0)
			goto err_handle;
	}
	return pm8xxx_spk_config();
err_handle:
	pr_err("pm8xxx_spk_probe failed."
			"Audio unavailable on speaker.\n");
	mutex_destroy(&the_spk_chip->spk_mutex);
	kfree(the_spk_chip);
	return ret;
}

Ejemplo n.º 2

static int __devinit pm8xxx_spk_probe(struct platform_device *pdev)
{
	const struct pm8xxx_spk_platform_data *pdata = pdev->dev.platform_data;
	int ret = 0;
	u8 value = 0;

	if (!pdata) {
		pr_err("missing platform data\n");
		return -EINVAL;
	}

	the_spk_chip = kzalloc(sizeof(struct pm8xxx_spk_chip), GFP_KERNEL);
	if (the_spk_chip == NULL) {
		pr_err("kzalloc() failed.\n");
		return -ENOMEM;
	}

	mutex_init(&the_spk_chip->spk_mutex);

	the_spk_chip->dev = &pdev->dev;
	the_spk_chip->version = pm8xxx_get_version(the_spk_chip->dev->parent);
	switch (pm8xxx_get_version(the_spk_chip->dev->parent)) {
	case PM8XXX_VERSION_8038:
		break;
	default:
		ret = -ENODEV;
		goto err_handle;
	}

	memcpy(&(the_spk_chip->pdata), pdata,
			sizeof(struct pm8xxx_spk_platform_data));

	the_spk_chip->base = pdev->resource[0].start;
	the_spk_chip->end = pdev->resource[0].end;

	if (the_spk_chip->pdata.spk_add_enable) {
		int val;
		val = pm8xxx_spk_read(PM8XXX_SPK_CTL1_REG_OFF);
		if (val < 0) {
			ret = val;
			goto err_handle;
		}
		val |= (the_spk_chip->pdata.spk_add_enable & PM8XXX_ADD_EN);
		ret = pm8xxx_spk_write(PM8XXX_SPK_CTL1_REG_OFF, val);
		if (ret < 0)
			goto err_handle;
	}
	value = ((the_spk_chip->pdata.cd_ng_threshold << 5) |
		the_spk_chip->pdata.cd_nf_preamp_bias << 3);
	pr_debug("Setting SPK_CTL2_REG = %02x\n", value);
	pm8xxx_spk_write(PM8XXX_SPK_CTL2_REG_OFF, value);

	value = ((the_spk_chip->pdata.cd_ng_hold << 5) |
		(the_spk_chip->pdata.cd_ng_max_atten << 1) |
		the_spk_chip->pdata.noise_mute);
	pr_debug("Setting SPK_CTL3_REG = %02x\n", value);
	pm8xxx_spk_write(PM8XXX_SPK_CTL3_REG_OFF, value);

	value = ((the_spk_chip->pdata.cd_ng_decay_rate << 5) |
		(the_spk_chip->pdata.cd_ng_attack_rate << 3) |
		the_spk_chip->pdata.cd_delay << 2);
	pr_debug("Setting SPK_CTL4_REG = %02x\n", value);
	pm8xxx_spk_write(PM8XXX_SPK_CTL4_REG_OFF, value);

	return pm8xxx_spk_config();
err_handle:
	pr_err("pm8xxx_spk_probe failed."
			"Audio unavailable on speaker.\n");
	mutex_destroy(&the_spk_chip->spk_mutex);
	kfree(the_spk_chip);
	return ret;
}