//! Updates GUI from internal state
//!
//! @note values are validated
//!
void AdvancedPanel::updateFlashNVM() {
#if (TARGET==CFV1) || (TARGET==ARM) || (TARGET==ARM_SWD)
static const double writeEfficiency = 0.5; // Assume 16/32-bit writes
static const double endurance = 10000.0; // From JU128 specification sheet
print("FlashPanel::updateFlashNVM()\n");
populateEepromControl();
eeepromSizeChoiceControl->SetSelection(eeepromSizeChoice);
populatePartitionControl();
FlexNVMInfoPtr flexNVMInfo = currentDevice->getflexNVMInfo();
if (flexNVMInfo == NULL) {
flexNvmDescriptionStaticControl->SetLabel(_("EEPROM emulation not available"));
eeepromSizeChoice = 0;
flexNvmPartitionIndex = 0;
return;
}
if (eeepromSizeChoice == 0) {
flexNvmDescriptionStaticControl->SetLabel(_("EEPROM emulation will be disabled if device is mass-erased"));
return;
}
vector<FlexNVMInfo::EeepromSizeValue> &eeepromSizeValues(flexNVMInfo->getEeepromSizeValues());
vector<FlexNVMInfo::FlexNvmPartitionValue> &flexNvmPartitionValues(flexNVMInfo->getFlexNvmPartitionValues());
unsigned eeepromSize = eeepromSizeValues[eeepromSizeChoice].size;
unsigned eepromSize = flexNvmPartitionValues[flexNvmPartitionIndex].backingStore;
double estimatedFlexRamWrites = (writeEfficiency*endurance*(eepromSize-2*eeepromSize))/eeepromSize;
char buff[100];
print(" eeepromSize=%d, eepromSize=%d, ratio=%.2g, estimatedFlexRamWrites=%.2g\n",
eeepromSize, eepromSize, (double)eepromSize/eeepromSize, estimatedFlexRamWrites);
snprintf(buff, sizeof(buff),"Estimated 16-bit write cycles (based on JU128 specs) = %.2g", estimatedFlexRamWrites);
flexNvmDescriptionStaticControl->SetLabel(wxString(buff, wxConvUTF8));
#endif
}
//! Control creation for USBDM Flash programming settings
//!
bool AdvancedPanel::CreateControls() {
print("AdvancedPanel::CreateControls()\n");
wxPanel* panel = this;
wxBoxSizer* panelBoxSizerV = new wxBoxSizer(wxVERTICAL);
panel->SetSizer(panelBoxSizerV);
wxStaticBox* itemStaticBox = new wxStaticBox(panel, wxID_ANY, _("BDM Parameters"));
wxStaticBoxSizer* itemStaticBoxSizer = new wxStaticBoxSizer(itemStaticBox, wxHORIZONTAL);
panelBoxSizerV->Add(itemStaticBoxSizer, 0, wxGROW|wxLEFT|wxRIGHT|wxTOP, 5);
wxGridBagSizer* gridBagSizer = new wxGridBagSizer(0,0);
itemStaticBoxSizer->Add(gridBagSizer, 0, wxGROW|wxALL, 5);
wxStaticText* itemStaticText;
int row = 0;
TimeIntervalValidator timeIntervalValidator(NULL, NULL, 100, 10000);
//===
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Power Off duration"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,2), wxLEFT|wxRIGHT|wxTOP, 5);
timeIntervalValidator.setObject("Power Off Duration", &bdmOptions.powerOffDuration);
powerOffDurationTextControl = new NumberTextEditCtrl( panel, ID_POWER_OFF_DURATION_TEXT, wxEmptyString, wxDefaultPosition, wxSize(80, -1), 0, timeIntervalValidator );
gridBagSizer->Add(powerOffDurationTextControl, wxGBPosition(row,2), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
powerOffDurationTextControl->SetToolTip(_("Duration to power off when cycling target power"));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("ms"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,3), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
row++;
//===
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Power On Recovery interval"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,2), wxLEFT|wxRIGHT|wxTOP, 5);
timeIntervalValidator.setObject("Power On Recovery interval", &bdmOptions.powerOnRecoveryInterval);
powerOnRecoveryIntervalTextControl = new NumberTextEditCtrl( panel, ID_POWER_RECOVERY_INTERVAL_TEXT, wxEmptyString, wxDefaultPosition, wxSize(80, -1), 0, timeIntervalValidator );
gridBagSizer->Add(powerOnRecoveryIntervalTextControl, wxGBPosition(row,2), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
powerOnRecoveryIntervalTextControl->SetToolTip(_("Interval to wait after power on of target"));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("ms"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,3), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
row++;
//===
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Reset duration"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,2), wxLEFT|wxRIGHT|wxTOP, 5);
timeIntervalValidator.setObject("Reset duration", &bdmOptions.resetDuration);
resetDurationTextControl = new NumberTextEditCtrl( panel, ID_RESET_DURATION_TEXT, wxEmptyString, wxDefaultPosition, wxSize(80, -1), 0, timeIntervalValidator );
gridBagSizer->Add(resetDurationTextControl, wxGBPosition(row,2), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
resetDurationTextControl->SetToolTip(_("Duration to apply reset to target"));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("ms"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,3), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
row++;
//===
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Reset Release interval"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,2), wxLEFT|wxRIGHT|wxTOP, 5);
timeIntervalValidator.setObject("Reset Release interval", &bdmOptions.resetReleaseInterval);
resetReleaseIntervalTextControl = new NumberTextEditCtrl( panel, ID_RESET_RELEASE_INTERVAL_TEXT, wxEmptyString, wxDefaultPosition, wxSize(80, -1), 0, timeIntervalValidator );
gridBagSizer->Add(resetReleaseIntervalTextControl, wxGBPosition(row,2), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
resetReleaseIntervalTextControl->SetToolTip(_("Interval to hold other target signals after reset release"));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("ms"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,3), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
row++;
//===
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Reset Recovery interval"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,2), wxLEFT|wxRIGHT|wxTOP, 5);
timeIntervalValidator.setObject("Reset Recovery interval", &bdmOptions.resetRecoveryInterval);
resetRecoveryIntervalTextControl = new NumberTextEditCtrl( panel, ID_RESET_RECOVERY_INTERVAL_TEXT, wxEmptyString, wxDefaultPosition, wxSize(80, -1), 0, timeIntervalValidator );
gridBagSizer->Add(resetRecoveryIntervalTextControl, wxGBPosition(row,2), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
resetRecoveryIntervalTextControl->SetToolTip(_("Interval to wait after target reset"));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("ms"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,3), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
row++;
#if (TARGET==CFV1) || (TARGET==ARM) || (TARGET==ARM_SWD)
//================================================================================
itemStaticBox = new wxStaticBox(panel, wxID_ANY, _("FlexNVM Parameters"));
itemStaticBoxSizer = new wxStaticBoxSizer(itemStaticBox, wxHORIZONTAL);
panelBoxSizerV->Add(itemStaticBoxSizer, 0, wxGROW|wxLEFT|wxRIGHT|wxTOP, 5);
gridBagSizer = new wxGridBagSizer(0,0);
itemStaticBoxSizer->Add(gridBagSizer, 0, wxGROW|wxALL, 5);
row = 0;
//===
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("EEEPROM Size"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
eeepromSizeChoiceControl = new wxChoice( panel, ID_EEPROM_SIZE_CHOICE, wxDefaultPosition , wxSize(150, -1));
gridBagSizer->Add(eeepromSizeChoiceControl, wxGBPosition(row,1), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP|wxEXPAND, 5);
eeepromSizeChoiceControl->SetToolTip(_("Controls size of emulated EEPROM region(s) in FlexRAM"));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("bytes"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,2), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
row++;
//===
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("FlexNVM Partition"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
flexNvmPartitionChoiceControl = new wxChoice( panel, ID_FLEXNVM_PARTITION_CHOICE, wxDefaultPosition , wxSize(150, -1));
gridBagSizer->Add(flexNvmPartitionChoiceControl, wxGBPosition(row,1), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
flexNvmPartitionChoiceControl->SetToolTip(_("Controls how FlexNVM is divided between Data Flash and EEPROM backing store\n"
"EEPROM backing store size >= 16 x EEEPROM size - affects flash lifetime"));
// flexNvmPartitionChoiceControl->SetMinSize(wxSize(100,0));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Kbytes"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,2), wxGBSpan(1,1), wxLEFT|wxRIGHT|wxTOP, 5);
wxSize sz(flexNvmPartitionChoiceControl->GetMinSize());
sz.x += 10;
flexNvmPartitionChoiceControl->SetMinSize(sz);
row++;
//===
flexNvmDescriptionStaticControl = new wxStaticText( panel, wxID_STATIC, _("Estimated 16-bit write cycles (based on JU128 specs) = ----------"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(flexNvmDescriptionStaticControl, wxGBPosition(row,0), wxGBSpan(1,3), wxLEFT|wxRIGHT|wxTOP, 5);
row++;
populateEepromControl();
populatePartitionControl();
#endif
return true;
}
//! Control creation for USBDM Flash programming settings
//!
bool AdvancedPanel::CreateControls() {
Logging log("AdvancedPanel::CreateControls");
wxPanel* panel = this;
wxBoxSizer* panelBoxSizerV = new wxBoxSizer(wxVERTICAL);
panel->SetSizer(panelBoxSizerV);
wxStaticBox* itemStaticBox = new wxStaticBox(panel, wxID_ANY, _("BDM Parameters"));
wxStaticBoxSizer* itemStaticBoxSizer = new wxStaticBoxSizer(itemStaticBox, wxHORIZONTAL);
panelBoxSizerV->Add(itemStaticBoxSizer, 0, wxGROW|wxLEFT|wxRIGHT|wxTOP, 5);
wxGridBagSizer* gridBagSizer = new wxGridBagSizer(0,0);
itemStaticBoxSizer->Add(gridBagSizer, 0, wxGROW|wxALL, 5);
const int borderWidth = 3;
wxStaticText* itemStaticText;
int row = 0;
// Note: copies are used so original is shared!
TimeIntervalValidator timeIntervalValidator(NULL, NULL, 10, 10000);
//===
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Power Off duration"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,2), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT, borderWidth);
timeIntervalValidator.setMin(100);
timeIntervalValidator.setMax(10000);
timeIntervalValidator.setObject("Power Off Duration", &bdmOptions.powerOffDuration);
powerOffDurationTextControl = new NumberTextEditCtrl( panel, ID_POWER_OFF_DURATION_TEXT, wxEmptyString, wxDefaultPosition, wxSize(80, -1), 0, timeIntervalValidator );
gridBagSizer->Add(powerOffDurationTextControl, wxGBPosition(row,2), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT, borderWidth);
powerOffDurationTextControl->SetToolTip(_("Duration to power off when cycling target power"));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("ms"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,3), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT, borderWidth);
row++;
//===
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Power On Recovery interval"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,2), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
timeIntervalValidator.setMin(100);
timeIntervalValidator.setMax(10000);
timeIntervalValidator.setObject("Power On Recovery interval", &bdmOptions.powerOnRecoveryInterval);
powerOnRecoveryIntervalTextControl = new NumberTextEditCtrl( panel, ID_POWER_RECOVERY_INTERVAL_TEXT, wxEmptyString, wxDefaultPosition, wxSize(80, -1), 0, timeIntervalValidator );
gridBagSizer->Add(powerOnRecoveryIntervalTextControl, wxGBPosition(row,2), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
powerOnRecoveryIntervalTextControl->SetToolTip(_("Interval to wait after power on of target"));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("ms"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,3), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
row++;
//===
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Reset duration"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,2), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
timeIntervalValidator.setMin(100);
timeIntervalValidator.setMax(10000);
timeIntervalValidator.setObject("Reset duration", &bdmOptions.resetDuration);
resetDurationTextControl = new NumberTextEditCtrl( panel, ID_RESET_DURATION_TEXT, wxEmptyString, wxDefaultPosition, wxSize(80, -1), 0, timeIntervalValidator );
gridBagSizer->Add(resetDurationTextControl, wxGBPosition(row,2), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
resetDurationTextControl->SetToolTip(_("Duration to apply reset to target"));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("ms"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,3), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
row++;
//===
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Reset Release interval"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,2), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
timeIntervalValidator.setMin(10);
timeIntervalValidator.setMax(10000);
timeIntervalValidator.setObject("Reset Release interval", &bdmOptions.resetReleaseInterval);
resetReleaseIntervalTextControl = new NumberTextEditCtrl( panel, ID_RESET_RELEASE_INTERVAL_TEXT, wxEmptyString, wxDefaultPosition, wxSize(80, -1), 0, timeIntervalValidator );
gridBagSizer->Add(resetReleaseIntervalTextControl, wxGBPosition(row,2), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
resetReleaseIntervalTextControl->SetToolTip(_("Interval to hold other target signals after reset release"));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("ms"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,3), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
row++;
//===
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Reset Recovery interval"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,2), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
timeIntervalValidator.setMin(10);
timeIntervalValidator.setMax(10000);
timeIntervalValidator.setObject("Reset Recovery interval", &bdmOptions.resetRecoveryInterval);
resetRecoveryIntervalTextControl = new NumberTextEditCtrl( panel, ID_RESET_RECOVERY_INTERVAL_TEXT, wxEmptyString, wxDefaultPosition, wxSize(80, -1), 0, timeIntervalValidator );
gridBagSizer->Add(resetRecoveryIntervalTextControl, wxGBPosition(row,2), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
resetRecoveryIntervalTextControl->SetToolTip(_("Interval to wait after target reset"));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("ms"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,3), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
row++;
#if ((TARGET==CFV1) || (TARGET==ARM)) && !defined(GDB_SERVER)
//================================================================================
itemStaticBox = new wxStaticBox(panel, wxID_ANY, _("FlexNVM Parameters"));
itemStaticBoxSizer = new wxStaticBoxSizer(itemStaticBox, wxHORIZONTAL);
panelBoxSizerV->Add(itemStaticBoxSizer, 0, wxGROW|wxLEFT|wxRIGHT|wxTOP, borderWidth);
gridBagSizer = new wxGridBagSizer(0,0);
itemStaticBoxSizer->Add(gridBagSizer, 0, wxGROW|wxALL, borderWidth);
row = 0;
//===
eeepromSizeStaticText = new wxStaticText( panel, wxID_STATIC, _("EEEPROM Size (FF)"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(eeepromSizeStaticText, wxGBPosition(row,0), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT, borderWidth);
eeepromSizeChoiceControl = new wxChoice( panel, ID_EEPROM_SIZE_CHOICE, wxDefaultPosition , wxSize(150, -1));
gridBagSizer->Add(eeepromSizeChoiceControl, wxGBPosition(row,1), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxEXPAND, borderWidth);
eeepromSizeChoiceControl->SetToolTip(_("Controls size of emulated EEPROM region(s) in FlexRAM"));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("bytes"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,2), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT, borderWidth);
row++;
//===
flexNvmPartitionStaticText = new wxStaticText( panel, wxID_STATIC, _("FlexNVM Partition (FF)"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(flexNvmPartitionStaticText, wxGBPosition(row,0), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT, borderWidth);
flexNvmPartitionChoiceControl = new wxChoice( panel, ID_FLEXNVM_PARTITION_CHOICE, wxDefaultPosition , wxSize(150, -1));
gridBagSizer->Add(flexNvmPartitionChoiceControl, wxGBPosition(row,1), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxTOP, borderWidth);
flexNvmPartitionChoiceControl->SetToolTip(_("Controls how FlexNVM is divided between Data Flash and EEPROM backing store\n"
"EEPROM backing store size >= 16 x EEEPROM size - affects flash lifetime"));
// flexNvmPartitionChoiceControl->SetMinSize(wxSize(100,0));
itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Kbytes"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(itemStaticText, wxGBPosition(row,2), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
wxSize sz(flexNvmPartitionChoiceControl->GetMinSize());
sz.x += 10;
flexNvmPartitionChoiceControl->SetMinSize(sz);
row++;
//===
flexNvmDescriptionStaticControl = new wxStaticText( panel, wxID_STATIC, _("Estimated 16-bit write cycles (based on JU128 specs) = ----------"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(flexNvmDescriptionStaticControl, wxGBPosition(row,0), wxGBSpan(1,3), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
row++;
populateEeepromControl();
populatePartitionControl();
#endif
#if !defined(LEGACY) && !defined(GDB_SERVER)
//================================================================================
itemStaticBox = new wxStaticBox(panel, wxID_ANY, _("Custom Security Parameters"));
itemStaticBoxSizer = new wxStaticBoxSizer(itemStaticBox, wxHORIZONTAL);
panelBoxSizerV->Add(itemStaticBoxSizer, 0, wxGROW|wxLEFT|wxRIGHT|wxTOP, borderWidth);
gridBagSizer = new wxGridBagSizer(0,0);
itemStaticBoxSizer->Add(gridBagSizer, 0, wxGROW|wxALL, borderWidth);
row = 0;
//===
customSecurityCheckbox = new wxCheckBox( panel, ID_ENABLE_CUSTOM_SECURITY_CHECKBOX, _("Enable"), wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(customSecurityCheckbox, wxGBPosition(row,0), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT, borderWidth);
// itemStaticText = new wxStaticText( panel, wxID_STATIC, _("Region"), wxDefaultPosition, wxDefaultSize, 0 );
// gridBagSizer->Add(itemStaticText, wxGBPosition(row,0), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT, borderWidth);
securityMemoryRegionChoice = new wxChoice( panel, ID_SECURITY_REGION_CHOICE, wxDefaultPosition , wxSize(130, -1));
gridBagSizer->Add(securityMemoryRegionChoice, wxGBPosition(row,1), wxGBSpan(1,1), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT, borderWidth);
securityMemoryRegionChoice->SetToolTip(_("Security information is programmed to this memory region"));
resetCustomButtonControl = new wxButton( panel, ID_RESET_CUSTOM_VALUES_BUTTON, _("&Reset Values"), wxDefaultPosition, wxDefaultSize, 0 );
resetCustomButtonControl->SetToolTip(_("Reset custom values to unsecured default"));
gridBagSizer->Add(resetCustomButtonControl, wxGBPosition(row,2), wxGBSpan(1,2), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT, borderWidth);
row++;
//===
securityValuesTextControl = new wxTextCtrl( panel, ID_SECURITY_TEXT_ENTRY, _(""), wxDefaultPosition , wxSize(300, 20), 0);
gridBagSizer->Add(securityValuesTextControl, wxGBPosition(row,0), wxGBSpan(1,3), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
securityValuesTextControl->SetToolTip(_("Security value used for device"));
securityValuesTextControl->SetValidator(SecurityValidator("Security value", SecurityInfoPtr()));
row++;
//===
securityMemoryRegionSecurityAddress = new wxStaticText( panel, wxID_STATIC, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
gridBagSizer->Add(securityMemoryRegionSecurityAddress, wxGBPosition(row,0), wxGBSpan(1,2), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT|wxTOP, borderWidth);
row++;
//===
#ifdef _WIN32
#define CONTROL_WIDTH (320)
#else
#define CONTROL_WIDTH (380)
#endif
securityDescriptionStaticText = new wxStaticText( panel, wxID_STATIC, _("...Status..."), wxDefaultPosition, wxSize(CONTROL_WIDTH, 75), wxALIGN_LEFT|wxST_NO_AUTORESIZE );
gridBagSizer->Add(securityDescriptionStaticText, wxGBPosition(row,0), wxGBSpan(1,3), wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT, borderWidth);
securityDescriptionStaticText->SetToolTip(_("See Target tab to change how these value are used"));
row++;
#endif
return true;
}