struct edge_list *
pre_edge_lcm (int n_exprs, sbitmap *transp,
sbitmap *avloc, sbitmap *antloc, sbitmap *kill,
sbitmap **insert, sbitmap **del)
{
struct edge_list *edge_list;
sbitmap *avin, *avout;
avin = sbitmap_vector_alloc (last_basic_block_for_fn (cfun), n_exprs);
avout = sbitmap_vector_alloc (last_basic_block_for_fn (cfun), n_exprs);
edge_list = pre_edge_lcm_avs (n_exprs, transp, avloc, antloc, kill,
avin, avout, insert, del);
sbitmap_vector_free (avout);
sbitmap_vector_free (avin);
return edge_list;
}
static int
optimize_mode_switching (void)
{
int e;
basic_block bb;
bool need_commit = false;
static const int num_modes[] = NUM_MODES_FOR_MODE_SWITCHING;
#define N_ENTITIES ARRAY_SIZE (num_modes)
int entity_map[N_ENTITIES];
struct bb_info *bb_info[N_ENTITIES];
int i, j;
int n_entities = 0;
int max_num_modes = 0;
bool emitted ATTRIBUTE_UNUSED = false;
basic_block post_entry = 0;
basic_block pre_exit = 0;
struct edge_list *edge_list = 0;
/* These bitmaps are used for the LCM algorithm. */
sbitmap *kill, *del, *insert, *antic, *transp, *comp;
sbitmap *avin, *avout;
for (e = N_ENTITIES - 1; e >= 0; e--)
if (OPTIMIZE_MODE_SWITCHING (e))
{
int entry_exit_extra = 0;
/* Create the list of segments within each basic block.
If NORMAL_MODE is defined, allow for two extra
blocks split from the entry and exit block. */
if (targetm.mode_switching.entry && targetm.mode_switching.exit)
entry_exit_extra = 3;
bb_info[n_entities]
= XCNEWVEC (struct bb_info,
last_basic_block_for_fn (cfun) + entry_exit_extra);
entity_map[n_entities++] = e;
if (num_modes[e] > max_num_modes)
max_num_modes = num_modes[e];
}
if (! n_entities)
return 0;
/* Make sure if MODE_ENTRY is defined MODE_EXIT is defined. */
gcc_assert ((targetm.mode_switching.entry && targetm.mode_switching.exit)
|| (!targetm.mode_switching.entry
&& !targetm.mode_switching.exit));
if (targetm.mode_switching.entry && targetm.mode_switching.exit)
{
/* Split the edge from the entry block, so that we can note that
there NORMAL_MODE is supplied. */
post_entry = split_edge (single_succ_edge (ENTRY_BLOCK_PTR_FOR_FN (cfun)));
pre_exit = create_pre_exit (n_entities, entity_map, num_modes);
}
df_analyze ();
/* Create the bitmap vectors. */
antic = sbitmap_vector_alloc (last_basic_block_for_fn (cfun),
n_entities * max_num_modes);
transp = sbitmap_vector_alloc (last_basic_block_for_fn (cfun),
n_entities * max_num_modes);
comp = sbitmap_vector_alloc (last_basic_block_for_fn (cfun),
n_entities * max_num_modes);
avin = sbitmap_vector_alloc (last_basic_block_for_fn (cfun),
n_entities * max_num_modes);
avout = sbitmap_vector_alloc (last_basic_block_for_fn (cfun),
n_entities * max_num_modes);
kill = sbitmap_vector_alloc (last_basic_block_for_fn (cfun),
n_entities * max_num_modes);
bitmap_vector_ones (transp, last_basic_block_for_fn (cfun));
bitmap_vector_clear (antic, last_basic_block_for_fn (cfun));
bitmap_vector_clear (comp, last_basic_block_for_fn (cfun));
for (j = n_entities - 1; j >= 0; j--)
{
int e = entity_map[j];
int no_mode = num_modes[e];
struct bb_info *info = bb_info[j];
rtx_insn *insn;
/* Determine what the first use (if any) need for a mode of entity E is.
This will be the mode that is anticipatable for this block.
Also compute the initial transparency settings. */
FOR_EACH_BB_FN (bb, cfun)
{
struct seginfo *ptr;
int last_mode = no_mode;
bool any_set_required = false;
HARD_REG_SET live_now;
info[bb->index].mode_out = info[bb->index].mode_in = no_mode;
REG_SET_TO_HARD_REG_SET (live_now, df_get_live_in (bb));
/* Pretend the mode is clobbered across abnormal edges. */
{
edge_iterator ei;
edge eg;
FOR_EACH_EDGE (eg, ei, bb->preds)
if (eg->flags & EDGE_COMPLEX)
break;
if (eg)
{
rtx_insn *ins_pos = BB_HEAD (bb);
if (LABEL_P (ins_pos))
ins_pos = NEXT_INSN (ins_pos);
gcc_assert (NOTE_INSN_BASIC_BLOCK_P (ins_pos));
if (ins_pos != BB_END (bb))
ins_pos = NEXT_INSN (ins_pos);
ptr = new_seginfo (no_mode, ins_pos, bb->index, live_now);
add_seginfo (info + bb->index, ptr);
for (i = 0; i < no_mode; i++)
clear_mode_bit (transp[bb->index], j, i);
}
}
FOR_BB_INSNS (bb, insn)
{
if (INSN_P (insn))
{
int mode = targetm.mode_switching.needed (e, insn);
rtx link;
if (mode != no_mode && mode != last_mode)
{
any_set_required = true;
last_mode = mode;
ptr = new_seginfo (mode, insn, bb->index, live_now);
add_seginfo (info + bb->index, ptr);
for (i = 0; i < no_mode; i++)
clear_mode_bit (transp[bb->index], j, i);
}
if (targetm.mode_switching.after)
last_mode = targetm.mode_switching.after (e, last_mode,
insn);
/* Update LIVE_NOW. */
for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
if (REG_NOTE_KIND (link) == REG_DEAD)
reg_dies (XEXP (link, 0), &live_now);
note_stores (PATTERN (insn), reg_becomes_live, &live_now);
for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
if (REG_NOTE_KIND (link) == REG_UNUSED)
reg_dies (XEXP (link, 0), &live_now);
}
}
info[bb->index].computing = last_mode;
/* Check for blocks without ANY mode requirements.
N.B. because of MODE_AFTER, last_mode might still
be different from no_mode, in which case we need to
mark the block as nontransparent. */
if (!any_set_required)
{
ptr = new_seginfo (no_mode, BB_END (bb), bb->index, live_now);
add_seginfo (info + bb->index, ptr);
if (last_mode != no_mode)
for (i = 0; i < no_mode; i++)
clear_mode_bit (transp[bb->index], j, i);
}
}
if (targetm.mode_switching.entry && targetm.mode_switching.exit)
{
int mode = targetm.mode_switching.entry (e);
info[post_entry->index].mode_out =
info[post_entry->index].mode_in = no_mode;
if (pre_exit)
{
info[pre_exit->index].mode_out =
info[pre_exit->index].mode_in = no_mode;
}
if (mode != no_mode)
{
bb = post_entry;
/* By always making this nontransparent, we save
an extra check in make_preds_opaque. We also
need this to avoid confusing pre_edge_lcm when
antic is cleared but transp and comp are set. */
for (i = 0; i < no_mode; i++)
clear_mode_bit (transp[bb->index], j, i);
/* Insert a fake computing definition of MODE into entry
blocks which compute no mode. This represents the mode on
entry. */
info[bb->index].computing = mode;
if (pre_exit)
info[pre_exit->index].seginfo->mode =
targetm.mode_switching.exit (e);
}
}
/* Set the anticipatable and computing arrays. */
for (i = 0; i < no_mode; i++)
{
int m = targetm.mode_switching.priority (entity_map[j], i);
FOR_EACH_BB_FN (bb, cfun)
{
if (info[bb->index].seginfo->mode == m)
set_mode_bit (antic[bb->index], j, m);
if (info[bb->index].computing == m)
set_mode_bit (comp[bb->index], j, m);
}
}
}
/* Calculate the optimal locations for the
placement mode switches to modes with priority I. */
FOR_EACH_BB_FN (bb, cfun)
bitmap_not (kill[bb->index], transp[bb->index]);
edge_list = pre_edge_lcm_avs (n_entities * max_num_modes, transp, comp, antic,
kill, avin, avout, &insert, &del);
for (j = n_entities - 1; j >= 0; j--)
{
int no_mode = num_modes[entity_map[j]];
/* Insert all mode sets that have been inserted by lcm. */
for (int ed = NUM_EDGES (edge_list) - 1; ed >= 0; ed--)
{
edge eg = INDEX_EDGE (edge_list, ed);
eg->aux = (void *)(intptr_t)-1;
for (i = 0; i < no_mode; i++)
{
int m = targetm.mode_switching.priority (entity_map[j], i);
if (mode_bit_p (insert[ed], j, m))
{
eg->aux = (void *)(intptr_t)m;
break;
}
}
}
FOR_EACH_BB_FN (bb, cfun)
{
struct bb_info *info = bb_info[j];
int last_mode = no_mode;
/* intialize mode in availability for bb. */
for (i = 0; i < no_mode; i++)
if (mode_bit_p (avout[bb->index], j, i))
{
if (last_mode == no_mode)
last_mode = i;
if (last_mode != i)
{
last_mode = no_mode;
break;
}
}
info[bb->index].mode_out = last_mode;
/* intialize mode out availability for bb. */
last_mode = no_mode;
for (i = 0; i < no_mode; i++)
if (mode_bit_p (avin[bb->index], j, i))
{
if (last_mode == no_mode)
last_mode = i;
if (last_mode != i)
{
last_mode = no_mode;
break;
}
}
info[bb->index].mode_in = last_mode;
for (i = 0; i < no_mode; i++)
if (mode_bit_p (del[bb->index], j, i))
info[bb->index].seginfo->mode = no_mode;
}
/* Now output the remaining mode sets in all the segments. */
/* In case there was no mode inserted. the mode information on the edge
might not be complete.
Update mode info on edges and commit pending mode sets. */
need_commit |= commit_mode_sets (edge_list, entity_map[j], bb_info[j]);
/* Reset modes for next entity. */
clear_aux_for_edges ();
FOR_EACH_BB_FN (bb, cfun)
{
struct seginfo *ptr, *next;
int cur_mode = bb_info[j][bb->index].mode_in;
for (ptr = bb_info[j][bb->index].seginfo; ptr; ptr = next)
{
next = ptr->next;
if (ptr->mode != no_mode)
{
rtx_insn *mode_set;
rtl_profile_for_bb (bb);
start_sequence ();
targetm.mode_switching.emit (entity_map[j], ptr->mode,
cur_mode, ptr->regs_live);
mode_set = get_insns ();
end_sequence ();
/* modes kill each other inside a basic block. */
cur_mode = ptr->mode;
/* Insert MODE_SET only if it is nonempty. */
if (mode_set != NULL_RTX)
{
emitted = true;
if (NOTE_INSN_BASIC_BLOCK_P (ptr->insn_ptr))
/* We need to emit the insns in a FIFO-like manner,
i.e. the first to be emitted at our insertion
point ends up first in the instruction steam.
Because we made sure that NOTE_INSN_BASIC_BLOCK is
only used for initially empty basic blocks, we
can achieve this by appending at the end of
the block. */
emit_insn_after
(mode_set, BB_END (NOTE_BASIC_BLOCK (ptr->insn_ptr)));
else
emit_insn_before (mode_set, ptr->insn_ptr);
}
default_rtl_profile ();
}
free (ptr);
}
}
free (bb_info[j]);
}
free_edge_list (edge_list);
/* Finished. Free up all the things we've allocated. */
sbitmap_vector_free (del);
sbitmap_vector_free (insert);
sbitmap_vector_free (kill);
sbitmap_vector_free (antic);
sbitmap_vector_free (transp);
sbitmap_vector_free (comp);
sbitmap_vector_free (avin);
sbitmap_vector_free (avout);
if (need_commit)
commit_edge_insertions ();
if (targetm.mode_switching.entry && targetm.mode_switching.exit)
cleanup_cfg (CLEANUP_NO_INSN_DEL);
else if (!need_commit && !emitted)
return 0;
return 1;
}