/*----------------------------------------------------------------------------*
* NAME
* ProcessDataSentIndication
*
* DESCRIPTION
* This function process the data sent indication.
*
* RETURNS
* Nothing
*
*----------------------------------------------------------------------------*/
extern void ProcessDataSentIndication(bool result)
{
uint8 data[SERIAL_RX_DATA_LENGTH] = {0};
if(result)
{
/* Data sent was a success, pop the sent data from the buffer. */
BQPopBytes(data, length_data_peeked,SEND_QUEUE_ID);
length_data_peeked = 0;
}
/* Send more data. */
processRxData();
}
void interruptFuncs::uart0rxtx_isr()
{
gotoState( ST_RECEIVING );
UART0::clearInterrupts( uart::configOptions::interrupts::receiveInt );
buffRx[rxCount] = UART0::receiveByte();
rxCount++;
if ( rxCount >= BUFF_RX_SIZE )
{
// Has received an entire packet, then, process it
rxCount = 0;
processRxData();
gotoState( ST_IDLE );
}
}
static uint16 uartRxDataCallback(void *p_rx_buffer,
uint16 length,
uint16 *p_additional_req_data_length)
{
if ( length > 0 )
{
/* First copy all the bytes received into the byte queue */
BQForceQueueBytes((const uint8 *)p_rx_buffer, length,SEND_QUEUE_ID);
}
/* Inform the UART driver that we'd like to receive another byte when it
* becomes available
*/
*p_additional_req_data_length = (uint16)NUMBER_OF_BYTES_RECEIVED_NEXT;
if(!IsAppWaitingForRadioEvent())
{
/* Send data */
processRxData();
}
/* Return the number of bytes that have been processed */
return length;
}
/* The main loop for the modem object. Must be called frequently.
Handles UART transfers and multi-block transfers. Returns NULL or a
pointer to a received datapack object.
*/
void HeliumModem::loop(void)
{
uint8_t ch;
static uint8_t stuffed=0;
static uint16_t cnt;
static uint8_t *ptr;
// Check if radio module has data for us.
while (serport->available())
{
ch = serport->read();
// See if we're starting a new frame (in case state is incorrect)
if (ch == SOF_CHAR)
{
stuffed = 0;
ppFrame.state = sof;
if (ppFrame.payload)
{
//free(ppFrame.payload);
ppFrame.payload = 0;
}
}
// Check for stuffed char
if (ch == ESC_CHAR)
{
// See if we have two or more ESC's in a row
if (stuffed)
// Already unstuffing, this is two ESC_CHAR's in a row
// User is exiting PP mode
return;
// Un-stuff next char
stuffed = 1;
continue;
}
// Un-stuff the char
if (stuffed)
{
switch (ch)
{
case SOF_ESC:
ch = SOF_CHAR;
break;
case EOF_ESC:
ch = EOF_CHAR;
break;
case ESC_ESC:
ch = ESC_CHAR;
break;
default:
// Very bad, wrong char, throw out everything
if (ppFrame.payload)
{
// Free the buffer
//free(ppFrame.payload);
ppFrame.payload = 0;
}
// Start over
ppFrame.state = sof;
break;
}
stuffed = false;
}
// Add a char to the frame
switch (ppFrame.state)
{
case sof:
// Waiting for sof
if (ch == SOF_CHAR)
ppFrame.state = sstate_t((int)ppFrame.state + 1);
break;
case len1:
// length low byte
ppFrame.length = ch;
ppFrame.state = sstate_t((int)ppFrame.state + 1);
break;
case len2:
// length high byte
ppFrame.length += ((uint16_t)ch) << 8;
ppFrame.state = sstate_t((int)ppFrame.state + 1);
// Save length to count so we can count the payload as it comes
cnt = ppFrame.length;
// Allocate a buffer for payload
ptr = 0;
if (cnt)
{
if (cnt > PP_FRAME_SIZE)
// Too big
ppFrame.state = sof;
else
ppFrame.payload = ptr = ppPayload;;
}
else
// No payload, quit now
ppFrame.state = eof;
break;
case payload:
// Save the char in buffer
*ptr++ = ch;
cnt--;
if (!cnt)
// Done with payload, move on
ppFrame.state = sstate_t((int)ppFrame.state + 1);
break;
case eof:
if (ch == EOF_CHAR)
{
// Process this frame in application code
processRxData(ppFrame.payload, ppFrame.length);
// Clear the memory pointer
ppFrame.payload = 0;
}
else
{
// Oops, this isn't right, free the buffer
//free(ppFrame.payload);
ppFrame.payload = 0;
}
// Ready for next serial frame
ppFrame.state = sof;
// Prepare for next frame, buffer to be freed by stack
ppFrame.payload = 0;
break;
default:
break;
}
}
}
