int
netif_news_open(struct romdev *pd)
{
struct iodesc *io;
/* find a free socket */
io = &sdesc;
if (io->io_netif) {
#ifdef DEBUG
printf("netif_open: device busy\n");
#endif
errno = ENFILE;
return -1;
}
memset(io, 0, sizeof(*io));
io->io_netif = pd;
/* Put our ethernet address in io->myea */
prom_getether(pd, io->myea);
return 0;
}
/*
* Called back during autoconfiguration for each device found
*/
void
device_register(device_t dev, void *aux)
{
device_t busdev = device_parent(dev);
int ofnode = 0;
/*
* We don't know the type of 'aux' - it depends on the
* bus this device attaches to. We are only interested in
* certain bus types, this only is used to find the boot
* device.
*/
if (busdev == NULL) {
/*
* Ignore mainbus0 itself, it certainly is not a boot
* device.
*/
} else if (device_is_a(busdev, "mainbus")) {
struct mainbus_attach_args *ma = aux;
ofnode = ma->ma_node;
} else if (device_is_a(busdev, "pci")) {
struct pci_attach_args *pa = aux;
ofnode = PCITAG_NODE(pa->pa_tag);
} else if (device_is_a(busdev, "sbus") || device_is_a(busdev, "dma")
|| device_is_a(busdev, "ledma")) {
struct sbus_attach_args *sa = aux;
ofnode = sa->sa_node;
} else if (device_is_a(busdev, "ebus")) {
struct ebus_attach_args *ea = aux;
ofnode = ea->ea_node;
} else if (device_is_a(busdev, "iic")) {
struct i2c_attach_args *ia = aux;
if (ia->ia_name == NULL) /* indirect config */
return;
ofnode = (int)ia->ia_cookie;
} else if (device_is_a(dev, "sd") || device_is_a(dev, "cd")) {
struct scsipibus_attach_args *sa = aux;
struct scsipi_periph *periph = sa->sa_periph;
int off = 0;
/*
* There are two "cd" attachments:
* atapibus -> atabus -> controller
* scsibus -> controller
* We want the node of the controller.
*/
if (device_is_a(busdev, "atapibus")) {
busdev = device_parent(busdev);
/*
* if the atapibus is connected to the secondary
* channel of the atabus, we need an offset of 2
* to match OF's idea of the target number.
* (i.e. on U5/U10 "cdrom" and "disk2" have the
* same target encoding, though different names)
*/
if (periph->periph_channel->chan_channel == 1)
off = 2;
}
ofnode = device_ofnode(device_parent(busdev));
dev_path_drive_match(dev, ofnode, periph->periph_target + off,
0, periph->periph_lun);
return;
} else if (device_is_a(dev, "wd")) {
struct ata_device *adev = aux;
ofnode = device_ofnode(device_parent(busdev));
dev_path_drive_match(dev, ofnode, adev->adev_channel*2+
adev->adev_drv_data->drive, 0, 0);
return;
}
if (busdev == NULL)
return;
if (ofnode != 0) {
uint8_t eaddr[ETHER_ADDR_LEN];
char tmpstr[32];
char tmpstr2[32];
int node;
uint32_t id = 0;
uint64_t nwwn = 0, pwwn = 0;
prop_dictionary_t dict;
prop_data_t blob;
prop_number_t pwwnd = NULL, nwwnd = NULL;
prop_number_t idd = NULL;
device_setofnode(dev, ofnode);
dev_path_exact_match(dev, ofnode);
if (OF_getprop(ofnode, "name", tmpstr, sizeof(tmpstr)) <= 0)
tmpstr[0] = 0;
if (OF_getprop(ofnode, "device_type", tmpstr2, sizeof(tmpstr2)) <= 0)
tmpstr2[0] = 0;
/*
* If this is a network interface, note the
* mac address.
*/
if (strcmp(tmpstr, "network") == 0
|| strcmp(tmpstr, "ethernet") == 0
|| strcmp(tmpstr2, "network") == 0
|| strcmp(tmpstr2, "ethernet") == 0
|| OF_getprop(ofnode, "mac-address", &eaddr, sizeof(eaddr))
>= ETHER_ADDR_LEN
|| OF_getprop(ofnode, "local-mac-address", &eaddr, sizeof(eaddr))
>= ETHER_ADDR_LEN) {
dict = device_properties(dev);
/*
* Is it a network interface with FCode?
*/
if (strcmp(tmpstr, "network") == 0 ||
strcmp(tmpstr2, "network") == 0) {
prop_dictionary_set_bool(dict,
"without-seeprom", true);
prom_getether(ofnode, eaddr);
} else {
if (!prom_get_node_ether(ofnode, eaddr))
goto noether;
}
blob = prop_data_create_data(eaddr, ETHER_ADDR_LEN);
prop_dictionary_set(dict, "mac-address", blob);
prop_object_release(blob);
of_to_dataprop(dict, ofnode, "shared-pins",
"shared-pins");
}
noether:
/* is this a FC node? */
if (strcmp(tmpstr, "scsi-fcp") == 0) {
dict = device_properties(dev);
if (OF_getprop(ofnode, "port-wwn", &pwwn, sizeof(pwwn))
== sizeof(pwwn)) {
pwwnd =
prop_number_create_unsigned_integer(pwwn);
prop_dictionary_set(dict, "port-wwn", pwwnd);
prop_object_release(pwwnd);
}
if (OF_getprop(ofnode, "node-wwn", &nwwn, sizeof(nwwn))
== sizeof(nwwn)) {
nwwnd =
prop_number_create_unsigned_integer(nwwn);
prop_dictionary_set(dict, "node-wwn", nwwnd);
prop_object_release(nwwnd);
}
}
/* is this an spi device? look for scsi-initiator-id */
if (strcmp(tmpstr2, "scsi") == 0 ||
strcmp(tmpstr2, "scsi-2") == 0) {
dict = device_properties(dev);
for (node = ofnode; node != 0; node = OF_parent(node)) {
if (OF_getprop(node, "scsi-initiator-id", &id,
sizeof(id)) <= 0)
continue;
idd = prop_number_create_unsigned_integer(id);
prop_dictionary_set(dict,
"scsi-initiator-id", idd);
prop_object_release(idd);
break;
}
}
}
/*
* Check for I2C busses and add data for their direct configuration.
*/
if (device_is_a(dev, "iic")) {
int busnode = device_ofnode(busdev);
if (busnode) {
prop_dictionary_t props = device_properties(busdev);
prop_object_t cfg = prop_dictionary_get(props,
"i2c-child-devices");
if (!cfg) {
int node;
const char *name;
/*
* pmu's i2c devices are under the "i2c" node,
* so find it out.
*/
name = prom_getpropstring(busnode, "name");
if (strcmp(name, "pmu") == 0) {
for (node = OF_child(busnode);
node != 0; node = OF_peer(node)) {
name = prom_getpropstring(node,
"name");
if (strcmp(name, "i2c") == 0) {
busnode = node;
break;
}
}
}
of_enter_i2c_devs(props, busnode,
sizeof(cell_t));
}
}
/*
* Add SPARCle spdmem devices (0x50 and 0x51) that the
* firmware does not know about.
*/
if (!strcmp(machine_model, "TAD,SPARCLE")) {
prop_dictionary_t props = device_properties(busdev);
prop_array_t cfg = prop_array_create();
int i;
DPRINTF(ACDB_PROBE, ("\nAdding spdmem for SPARCle "));
for (i = 0x50; i <= 0x51; i++) {
prop_dictionary_t spd =
prop_dictionary_create();
prop_dictionary_set_cstring(spd, "name",
"dimm-spd");
prop_dictionary_set_uint32(spd, "addr", i);
prop_dictionary_set_uint64(spd, "cookie", 0);
prop_array_add(cfg, spd);
prop_object_release(spd);
}
prop_dictionary_set(props, "i2c-child-devices", cfg);
prop_object_release(cfg);
}
}
/* set properties for PCI framebuffers */
if (device_is_a(busdev, "pci")) {
/* see if this is going to be console */
struct pci_attach_args *pa = aux;
prop_dictionary_t dict;
int sub;
int console = 0;
dict = device_properties(dev);
/* we only care about display devices from here on */
if (PCI_CLASS(pa->pa_class) != PCI_CLASS_DISPLAY)
return;
console = (ofnode == console_node);
if (!console) {
/*
* see if any child matches since OF attaches
* nodes for each head and /chosen/stdout
* points to the head rather than the device
* itself in this case
*/
sub = OF_child(ofnode);
while ((sub != 0) && (sub != console_node)) {
sub = OF_peer(sub);
}
if (sub == console_node) {
console = true;
}
}
copyprops(busdev, ofnode, dict, console);
if (console) {
uint64_t cmap_cb;
prop_dictionary_set_uint32(dict,
"instance_handle", console_instance);
gfb_cb.gcc_cookie =
(void *)(intptr_t)console_instance;
gfb_cb.gcc_set_mapreg = of_set_palette;
cmap_cb = (uint64_t)(uintptr_t)&gfb_cb;
prop_dictionary_set_uint64(dict,
"cmap_callback", cmap_cb);
}
#ifdef notyet
else {
int width;
/*
* the idea is to 'open' display devices with no useful
* properties, in the hope that the firmware will
* properly initialize them and we can run things like
* genfb on them
*/
if (OF_getprop(node, "width", &width, sizeof(width))
!= 4) {
instance = OF_open(name);
#endif
}
}
/*
* Called back after autoconfiguration of a device is done
*/
void
device_register_post_config(device_t dev, void *aux)
{
if (booted_device == NULL && device_is_a(dev, "sd")) {
struct scsipibus_attach_args *sa = aux;
struct scsipi_periph *periph = sa->sa_periph;
uint64_t wwn = 0;
int ofnode;
/*
* If this is a FC-AL drive it will have
* aquired its WWN device property by now,
* so we can properly match it.
*/
if (prop_dictionary_get_uint64(device_properties(dev),
"port-wwn", &wwn)) {
/*
* Different to what we do in device_register,
* we do not pass the "controller" ofnode,
* because FC-AL devices attach below a "fp" node,
* E.g.: /pci/SUNW,qlc@4/fp@0,0/disk
* and we need the parent of "disk" here.
*/
ofnode = device_ofnode(
device_parent(device_parent(dev)));
for (ofnode = OF_child(ofnode);
ofnode != 0 && booted_device == NULL;
ofnode = OF_peer(ofnode)) {
dev_path_drive_match(dev, ofnode,
periph->periph_target,
wwn, periph->periph_lun);
}
}
}
}
static void
copyprops(device_t busdev, int node, prop_dictionary_t dict, int is_console)
{
device_t cntrlr;
prop_dictionary_t psycho;
paddr_t fbpa, mem_base = 0;
uint32_t temp, fboffset;
uint32_t fbaddr = 0;
int options;
char output_device[256];
char *pos;
cntrlr = device_parent(busdev);
if (cntrlr != NULL) {
psycho = device_properties(cntrlr);
prop_dictionary_get_uint64(psycho, "mem_base", &mem_base);
}
if (is_console)
prop_dictionary_set_bool(dict, "is_console", 1);
of_to_uint32_prop(dict, node, "width", "width");
of_to_uint32_prop(dict, node, "height", "height");
of_to_uint32_prop(dict, node, "linebytes", "linebytes");
if (!of_to_uint32_prop(dict, node, "depth", "depth") &&
/* Some cards have an extra space in the property name */
!of_to_uint32_prop(dict, node, "depth ", "depth")) {
/*
* XXX we should check linebytes vs. width but those
* FBs that don't have a depth property ( /chaos/control... )
* won't have linebytes either
*/
prop_dictionary_set_uint32(dict, "depth", 8);
}
OF_getprop(node, "address", &fbaddr, sizeof(fbaddr));
if (fbaddr != 0) {
pmap_extract(pmap_kernel(), fbaddr, &fbpa);
#ifdef DEBUG
printf("membase: %lx fbpa: %lx\n", (unsigned long)mem_base,
(unsigned long)fbpa);
#endif
if (mem_base == 0) {
/* XXX this is guesswork */
fboffset = (uint32_t)(fbpa & 0xffffffff);
}
fboffset = (uint32_t)(fbpa - mem_base);
prop_dictionary_set_uint32(dict, "address", fboffset);
}
if (!of_to_dataprop(dict, node, "EDID", "EDID"))
of_to_dataprop(dict, node, "edid", "EDID");
temp = 0;
if (OF_getprop(node, "ATY,RefCLK", &temp, sizeof(temp)) != 4) {
OF_getprop(OF_parent(node), "ATY,RefCLK", &temp,
sizeof(temp));
}
if (temp != 0)
prop_dictionary_set_uint32(dict, "refclk", temp / 10);
/*
* finally, let's see if there's a video mode specified in
* output-device and pass it on so drivers like radeonfb
* can do their thing
*/
if (!is_console)
return;
options = OF_finddevice("/options");
if ((options == 0) || (options == -1))
return;
if (OF_getprop(options, "output-device", output_device, 256) == 0)
return;
/* find the mode string if there is one */
pos = strstr(output_device, ":r");
if (pos == NULL)
return;
prop_dictionary_set_cstring(dict, "videomode", pos + 2);
}
static void
of_set_palette(void *cookie, int index, int r, int g, int b)
{
int ih = (int)((intptr_t)cookie);
OF_call_method_1("color!", ih, 4, r, g, b, index);
}
void
beattach(device_t parent, device_t self, void *aux)
{
struct sbus_attach_args *sa = aux;
struct qec_softc *qec = device_private(parent);
struct be_softc *sc = device_private(self);
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct mii_data *mii = &sc->sc_mii;
struct mii_softc *child;
int node = sa->sa_node;
bus_dma_tag_t dmatag = sa->sa_dmatag;
bus_dma_segment_t seg;
bus_size_t size;
int instance;
int rseg, error;
uint32_t v;
sc->sc_dev = self;
if (sa->sa_nreg < 3) {
printf(": only %d register sets\n", sa->sa_nreg);
return;
}
if (bus_space_map(sa->sa_bustag,
(bus_addr_t)BUS_ADDR(sa->sa_reg[0].oa_space, sa->sa_reg[0].oa_base),
(bus_size_t)sa->sa_reg[0].oa_size,
0, &sc->sc_cr) != 0) {
printf(": cannot map registers\n");
return;
}
if (bus_space_map(sa->sa_bustag,
(bus_addr_t)BUS_ADDR(sa->sa_reg[1].oa_space, sa->sa_reg[1].oa_base),
(bus_size_t)sa->sa_reg[1].oa_size,
0, &sc->sc_br) != 0) {
printf(": cannot map registers\n");
return;
}
if (bus_space_map(sa->sa_bustag,
(bus_addr_t)BUS_ADDR(sa->sa_reg[2].oa_space, sa->sa_reg[2].oa_base),
(bus_size_t)sa->sa_reg[2].oa_size,
0, &sc->sc_tr) != 0) {
printf(": cannot map registers\n");
return;
}
sc->sc_bustag = sa->sa_bustag;
sc->sc_qec = qec;
sc->sc_qr = qec->sc_regs;
sc->sc_rev = prom_getpropint(node, "board-version", -1);
printf(": rev %x,", sc->sc_rev);
callout_init(&sc->sc_tick_ch, 0);
sc->sc_channel = prom_getpropint(node, "channel#", -1);
if (sc->sc_channel == -1)
sc->sc_channel = 0;
sc->sc_burst = prom_getpropint(node, "burst-sizes", -1);
if (sc->sc_burst == -1)
sc->sc_burst = qec->sc_burst;
/* Clamp at parent's burst sizes */
sc->sc_burst &= qec->sc_burst;
/* Establish interrupt handler */
if (sa->sa_nintr)
(void)bus_intr_establish(sa->sa_bustag, sa->sa_pri, IPL_NET,
beintr, sc);
prom_getether(node, sc->sc_enaddr);
printf(" address %s\n", ether_sprintf(sc->sc_enaddr));
/*
* Allocate descriptor ring and buffers.
*/
/* for now, allocate as many bufs as there are ring descriptors */
sc->sc_rb.rb_ntbuf = QEC_XD_RING_MAXSIZE;
sc->sc_rb.rb_nrbuf = QEC_XD_RING_MAXSIZE;
size =
QEC_XD_RING_MAXSIZE * sizeof(struct qec_xd) +
QEC_XD_RING_MAXSIZE * sizeof(struct qec_xd) +
sc->sc_rb.rb_ntbuf * BE_PKT_BUF_SZ +
sc->sc_rb.rb_nrbuf * BE_PKT_BUF_SZ;
/* Get a DMA handle */
if ((error = bus_dmamap_create(dmatag, size, 1, size, 0,
BUS_DMA_NOWAIT, &sc->sc_dmamap)) != 0) {
aprint_error_dev(self, "DMA map create error %d\n", error);
return;
}
/* Allocate DMA buffer */
if ((error = bus_dmamem_alloc(sa->sa_dmatag, size, 0, 0,
&seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) {
aprint_error_dev(self, "DMA buffer alloc error %d\n", error);
return;
}
/* Map DMA memory in CPU addressable space */
if ((error = bus_dmamem_map(sa->sa_dmatag, &seg, rseg, size,
&sc->sc_rb.rb_membase, BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
aprint_error_dev(self, "DMA buffer map error %d\n", error);
bus_dmamem_free(sa->sa_dmatag, &seg, rseg);
return;
}
/* Load the buffer */
if ((error = bus_dmamap_load(dmatag, sc->sc_dmamap,
sc->sc_rb.rb_membase, size, NULL, BUS_DMA_NOWAIT)) != 0) {
aprint_error_dev(self, "DMA buffer map load error %d\n", error);
bus_dmamem_unmap(dmatag, sc->sc_rb.rb_membase, size);
bus_dmamem_free(dmatag, &seg, rseg);
return;
}
sc->sc_rb.rb_dmabase = sc->sc_dmamap->dm_segs[0].ds_addr;
/*
* Initialize our media structures and MII info.
*/
mii->mii_ifp = ifp;
mii->mii_readreg = be_mii_readreg;
mii->mii_writereg = be_mii_writereg;
mii->mii_statchg = be_mii_statchg;
ifmedia_init(&mii->mii_media, 0, be_ifmedia_upd, be_ifmedia_sts);
/*
* Initialize transceiver and determine which PHY connection to use.
*/
be_mii_sync(sc);
v = bus_space_read_4(sc->sc_bustag, sc->sc_tr, BE_TRI_MGMTPAL);
instance = 0;
if ((v & MGMT_PAL_EXT_MDIO) != 0) {
mii_attach(self, mii, 0xffffffff, BE_PHY_EXTERNAL,
MII_OFFSET_ANY, 0);
child = LIST_FIRST(&mii->mii_phys);
if (child == NULL) {
/* No PHY attached */
ifmedia_add(&sc->sc_media,
IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, instance),
0, NULL);
ifmedia_set(&sc->sc_media,
IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, instance));
} else {
/*
* Note: we support just one PHY on the external
* MII connector.
*/
#ifdef DIAGNOSTIC
if (LIST_NEXT(child, mii_list) != NULL) {
aprint_error_dev(self,
"spurious MII device %s attached\n",
device_xname(child->mii_dev));
}
#endif
if (child->mii_phy != BE_PHY_EXTERNAL ||
child->mii_inst > 0) {
aprint_error_dev(self,
"cannot accommodate MII device %s"
" at phy %d, instance %d\n",
device_xname(child->mii_dev),
child->mii_phy, child->mii_inst);
} else {
sc->sc_phys[instance] = child->mii_phy;
}
/*
* XXX - we can really do the following ONLY if the
* phy indeed has the auto negotiation capability!!
*/
ifmedia_set(&sc->sc_media,
IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, instance));
/* Mark our current media setting */
be_pal_gate(sc, BE_PHY_EXTERNAL);
instance++;
}
}
if ((v & MGMT_PAL_INT_MDIO) != 0) {
/*
* The be internal phy looks vaguely like MII hardware,
* but not enough to be able to use the MII device
* layer. Hence, we have to take care of media selection
* ourselves.
*/
sc->sc_mii_inst = instance;
sc->sc_phys[instance] = BE_PHY_INTERNAL;
/* Use `ifm_data' to store BMCR bits */
ifmedia_add(&sc->sc_media,
IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, instance),
0, NULL);
ifmedia_add(&sc->sc_media,
IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, instance),
BMCR_S100, NULL);
ifmedia_add(&sc->sc_media,
IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, instance),
0, NULL);
printf("on-board transceiver at %s: 10baseT, 100baseTX, auto\n",
device_xname(self));
be_mii_reset(sc, BE_PHY_INTERNAL);
/* Only set default medium here if there's no external PHY */
if (instance == 0) {
be_pal_gate(sc, BE_PHY_INTERNAL);
ifmedia_set(&sc->sc_media,
IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, instance));
} else
be_mii_writereg(self,
BE_PHY_INTERNAL, MII_BMCR, BMCR_ISO);
}
memcpy(ifp->if_xname, device_xname(self), IFNAMSIZ);
ifp->if_softc = sc;
ifp->if_start = bestart;
ifp->if_ioctl = beioctl;
ifp->if_watchdog = bewatchdog;
ifp->if_init = beinit;
ifp->if_stop = bestop;
ifp->if_flags =
IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | IFF_MULTICAST;
IFQ_SET_READY(&ifp->if_snd);
/* claim 802.1q capability */
sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU;
/* Attach the interface. */
if_attach(ifp);
ether_ifattach(ifp, sc->sc_enaddr);
}
void
leattach_ledma(device_t parent, device_t self, void *aux)
{
struct le_softc *lesc = device_private(self);
struct lance_softc *sc = &lesc->sc_am7990.lsc;
struct lsi64854_softc *lsi = device_private(parent);
struct sbus_attach_args *sa = aux;
bus_dma_tag_t dmatag = sa->sa_dmatag;
bus_dma_segment_t seg;
int rseg, error;
sc->sc_dev = self;
lesc->sc_bustag = sa->sa_bustag;
/* Establish link to `ledma' device */
lesc->sc_dma = lsi;
lesc->sc_dma->sc_client = lesc;
/* Map device registers */
if (sbus_bus_map(sa->sa_bustag,
sa->sa_slot,
sa->sa_offset,
sa->sa_size,
0, &lesc->sc_reg) != 0) {
aprint_error(": cannot map registers\n");
return;
}
/* Allocate buffer memory */
sc->sc_memsize = MEMSIZE;
/* Get a DMA handle */
if ((error = bus_dmamap_create(dmatag, MEMSIZE, 1, MEMSIZE,
LEDMA_BOUNDARY, BUS_DMA_NOWAIT,
&lesc->sc_dmamap)) != 0) {
aprint_error(": DMA map create error %d\n", error);
return;
}
/* Allocate DMA buffer */
if ((error = bus_dmamem_alloc(dmatag, MEMSIZE, 0, LEDMA_BOUNDARY,
&seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) {
aprint_error(": DMA buffer alloc error %d\n",error);
return;
}
/* Map DMA buffer into kernel space */
if ((error = bus_dmamem_map(dmatag, &seg, rseg, MEMSIZE,
(void **)&sc->sc_mem,
BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
aprint_error(": DMA buffer map error %d\n", error);
bus_dmamem_free(dmatag, &seg, rseg);
return;
}
/* Load DMA buffer */
if ((error = bus_dmamap_load(dmatag, lesc->sc_dmamap, sc->sc_mem,
MEMSIZE, NULL, BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
aprint_error(": DMA buffer map load error %d\n", error);
bus_dmamem_free(dmatag, &seg, rseg);
bus_dmamem_unmap(dmatag, sc->sc_mem, MEMSIZE);
return;
}
lesc->sc_laddr = lesc->sc_dmamap->dm_segs[0].ds_addr;
sc->sc_addr = lesc->sc_laddr & 0xffffff;
sc->sc_conf3 = LE_C3_BSWP | LE_C3_ACON | LE_C3_BCON;
/* Assume SBus is grandparent */
lesc->sc_sd.sd_reset = (void *)lance_reset;
sbus_establish(&lesc->sc_sd, parent);
sc->sc_mediachange = lemediachange;
sc->sc_mediastatus = lemediastatus;
sc->sc_supmedia = lemedia;
sc->sc_nsupmedia = NLEMEDIA;
sc->sc_defaultmedia = IFM_ETHER|IFM_AUTO;
prom_getether(sa->sa_node, sc->sc_enaddr);
sc->sc_copytodesc = lance_copytobuf_contig;
sc->sc_copyfromdesc = lance_copyfrombuf_contig;
sc->sc_copytobuf = lance_copytobuf_contig;
sc->sc_copyfrombuf = lance_copyfrombuf_contig;
sc->sc_zerobuf = lance_zerobuf_contig;
sc->sc_rdcsr = lerdcsr;
sc->sc_wrcsr = lewrcsr;
sc->sc_hwinit = lehwinit;
sc->sc_nocarrier = lenocarrier;
sc->sc_hwreset = lehwreset;
/* Establish interrupt handler */
if (sa->sa_nintr != 0)
(void)bus_intr_establish(sa->sa_bustag, sa->sa_pri, IPL_NET,
am7990_intr, sc);
am7990_config(&lesc->sc_am7990);
/* now initialize DMA */
lehwreset(sc);
}
void
qeattach(device_t parent, device_t self, void *aux)
{
struct sbus_attach_args *sa = aux;
struct qec_softc *qec = device_private(parent);
struct qe_softc *sc = device_private(self);
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
int node = sa->sa_node;
bus_dma_tag_t dmatag = sa->sa_dmatag;
bus_dma_segment_t seg;
bus_size_t size;
int rseg, error;
sc->sc_dev = self;
if (sa->sa_nreg < 2) {
printf("%s: only %d register sets\n",
device_xname(self), sa->sa_nreg);
return;
}
if (bus_space_map(sa->sa_bustag,
(bus_addr_t)BUS_ADDR(
sa->sa_reg[0].oa_space,
sa->sa_reg[0].oa_base),
(bus_size_t)sa->sa_reg[0].oa_size,
0, &sc->sc_cr) != 0) {
aprint_error_dev(self, "cannot map registers\n");
return;
}
if (bus_space_map(sa->sa_bustag,
(bus_addr_t)BUS_ADDR(
sa->sa_reg[1].oa_space,
sa->sa_reg[1].oa_base),
(bus_size_t)sa->sa_reg[1].oa_size,
0, &sc->sc_mr) != 0) {
aprint_error_dev(self, "cannot map registers\n");
return;
}
sc->sc_rev = prom_getpropint(node, "mace-version", -1);
printf(" rev %x", sc->sc_rev);
sc->sc_bustag = sa->sa_bustag;
sc->sc_dmatag = sa->sa_dmatag;
sc->sc_qec = qec;
sc->sc_qr = qec->sc_regs;
sc->sc_channel = prom_getpropint(node, "channel#", -1);
sc->sc_burst = qec->sc_burst;
qestop(sc);
/* Note: no interrupt level passed */
(void)bus_intr_establish(sa->sa_bustag, 0, IPL_NET, qeintr, sc);
prom_getether(node, sc->sc_enaddr);
/*
* Allocate descriptor ring and buffers.
*/
/* for now, allocate as many bufs as there are ring descriptors */
sc->sc_rb.rb_ntbuf = QEC_XD_RING_MAXSIZE;
sc->sc_rb.rb_nrbuf = QEC_XD_RING_MAXSIZE;
size = QEC_XD_RING_MAXSIZE * sizeof(struct qec_xd) +
QEC_XD_RING_MAXSIZE * sizeof(struct qec_xd) +
sc->sc_rb.rb_ntbuf * QE_PKT_BUF_SZ +
sc->sc_rb.rb_nrbuf * QE_PKT_BUF_SZ;
/* Get a DMA handle */
if ((error = bus_dmamap_create(dmatag, size, 1, size, 0,
BUS_DMA_NOWAIT, &sc->sc_dmamap)) != 0) {
aprint_error_dev(self, "DMA map create error %d\n",
error);
return;
}
/* Allocate DMA buffer */
if ((error = bus_dmamem_alloc(dmatag, size, 0, 0,
&seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) {
aprint_error_dev(self, "DMA buffer alloc error %d\n",
error);
return;
}
/* Map DMA buffer in CPU addressable space */
if ((error = bus_dmamem_map(dmatag, &seg, rseg, size,
&sc->sc_rb.rb_membase,
BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
aprint_error_dev(self, "DMA buffer map error %d\n",
error);
bus_dmamem_free(dmatag, &seg, rseg);
return;
}
/* Load the buffer */
if ((error = bus_dmamap_load(dmatag, sc->sc_dmamap,
sc->sc_rb.rb_membase, size, NULL,
BUS_DMA_NOWAIT)) != 0) {
aprint_error_dev(self, "DMA buffer map load error %d\n",
error);
bus_dmamem_unmap(dmatag, sc->sc_rb.rb_membase, size);
bus_dmamem_free(dmatag, &seg, rseg);
return;
}
sc->sc_rb.rb_dmabase = sc->sc_dmamap->dm_segs[0].ds_addr;
/* Initialize media properties */
ifmedia_init(&sc->sc_ifmedia, 0, qe_ifmedia_upd, qe_ifmedia_sts);
ifmedia_add(&sc->sc_ifmedia,
IFM_MAKEWORD(IFM_ETHER,IFM_10_T,0,0),
0, NULL);
ifmedia_add(&sc->sc_ifmedia,
IFM_MAKEWORD(IFM_ETHER,IFM_10_5,0,0),
0, NULL);
ifmedia_add(&sc->sc_ifmedia,
IFM_MAKEWORD(IFM_ETHER,IFM_AUTO,0,0),
0, NULL);
ifmedia_set(&sc->sc_ifmedia, IFM_ETHER|IFM_AUTO);
memcpy(ifp->if_xname, device_xname(self), IFNAMSIZ);
ifp->if_softc = sc;
ifp->if_start = qestart;
ifp->if_ioctl = qeioctl;
ifp->if_watchdog = qewatchdog;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS |
IFF_MULTICAST;
IFQ_SET_READY(&ifp->if_snd);
/* Attach the interface. */
if_attach(ifp);
ether_ifattach(ifp, sc->sc_enaddr);
printf(" address %s\n", ether_sprintf(sc->sc_enaddr));
}
