static int
settunnel(prop_dictionary_t env, prop_dictionary_t oenv)
{
const struct paddr_prefix *srcpfx, *dstpfx;
struct if_laddrreq req;
prop_data_t srcdata, dstdata;
srcdata = (prop_data_t)prop_dictionary_get(env, "tunsrc");
dstdata = (prop_data_t)prop_dictionary_get(env, "tundst");
if (srcdata == NULL || dstdata == NULL) {
warnx("%s.%d", __func__, __LINE__);
errno = ENOENT;
return -1;
}
srcpfx = prop_data_data_nocopy(srcdata);
dstpfx = prop_data_data_nocopy(dstdata);
if (srcpfx->pfx_addr.sa_family != dstpfx->pfx_addr.sa_family)
errx(EXIT_FAILURE,
"source and destination address families do not match");
memset(&req, 0, sizeof(req));
memcpy(&req.addr, &srcpfx->pfx_addr,
MIN(sizeof(req.addr), srcpfx->pfx_addr.sa_len));
memcpy(&req.dstaddr, &dstpfx->pfx_addr,
MIN(sizeof(req.dstaddr), dstpfx->pfx_addr.sa_len));
#ifdef INET6
if (req.addr.ss_family == AF_INET6) {
struct sockaddr_in6 *s6, *d;
s6 = (struct sockaddr_in6 *)&req.addr;
d = (struct sockaddr_in6 *)&req.dstaddr;
if (s6->sin6_scope_id != d->sin6_scope_id) {
errx(EXIT_FAILURE, "scope mismatch");
/* NOTREACHED */
}
if (IN6_IS_ADDR_MULTICAST(&d->sin6_addr) ||
IN6_IS_ADDR_MULTICAST(&s6->sin6_addr))
errx(EXIT_FAILURE, "tunnel src/dst is multicast");
/* embed scopeid */
if (s6->sin6_scope_id &&
IN6_IS_ADDR_LINKLOCAL(&s6->sin6_addr)) {
*(u_int16_t *)&s6->sin6_addr.s6_addr[2] =
htons(s6->sin6_scope_id);
}
if (d->sin6_scope_id && IN6_IS_ADDR_LINKLOCAL(&d->sin6_addr)) {
*(u_int16_t *)&d->sin6_addr.s6_addr[2] =
htons(d->sin6_scope_id);
}
}
#endif /* INET6 */
if (direct_ioctl(env, SIOCSLIFPHYADDR, &req) == -1)
warn("SIOCSLIFPHYADDR");
return 0;
}
/*
* return appropriate mode for HID descriptor
*/
const char *
hid_mode(prop_data_t desc)
{
report_desc_t r;
hid_data_t d;
struct hid_item h;
const char *mode;
hid_init(NULL);
mode = BTDEVauth; /* default */
r = hid_use_report_desc(prop_data_data_nocopy(desc),
prop_data_size(desc));
if (r == NULL)
err(EXIT_FAILURE, "hid_use_report_desc");
d = hid_start_parse(r, ~0, -1);
while (hid_get_item(d, &h) > 0) {
if (h.kind == hid_collection
&& HID_PAGE(h.usage) == HUP_GENERIC_DESKTOP
&& HID_USAGE(h.usage) == HUG_KEYBOARD)
mode = BTDEVencrypt;
}
hid_end_parse(d);
hid_dispose_report_desc(r);
return mode;
}
static int __noinline
npf_mk_ncode(prop_object_t obj, void **code, size_t *csize,
prop_dictionary_t errdict)
{
const void *ncptr;
int nc_err, errat;
size_t nc_size;
void *nc;
/*
* Allocate, copy and validate n-code. XXX: Inefficient.
*/
ncptr = prop_data_data_nocopy(obj);
nc_size = prop_data_size(obj);
if (ncptr == NULL || nc_size > NPF_NCODE_LIMIT) {
NPF_ERR_DEBUG(errdict);
return ERANGE;
}
nc = npf_ncode_alloc(nc_size);
if (nc == NULL) {
NPF_ERR_DEBUG(errdict);
return ENOMEM;
}
memcpy(nc, ncptr, nc_size);
nc_err = npf_ncode_validate(nc, nc_size, &errat);
if (nc_err) {
npf_ncode_free(nc, nc_size);
prop_dictionary_set_int32(errdict, "ncode-error", nc_err);
prop_dictionary_set_int32(errdict, "ncode-errat", errat);
return EINVAL;
}
*code = nc;
*csize = nc_size;
return 0;
}
static void
epe_attach(device_t parent, device_t self, void *aux)
{
struct epe_softc *sc = device_private(self);
struct epsoc_attach_args *sa;
prop_data_t enaddr;
aprint_normal("\n");
sa = aux;
sc->sc_dev = self;
sc->sc_iot = sa->sa_iot;
sc->sc_intr = sa->sa_intr;
sc->sc_dmat = sa->sa_dmat;
if (bus_space_map(sa->sa_iot, sa->sa_addr, sa->sa_size,
0, &sc->sc_ioh))
panic("%s: Cannot map registers", device_xname(self));
/* Fetch the Ethernet address from property if set. */
enaddr = prop_dictionary_get(device_properties(self), "mac-address");
if (enaddr != NULL) {
KASSERT(prop_object_type(enaddr) == PROP_TYPE_DATA);
KASSERT(prop_data_size(enaddr) == ETHER_ADDR_LEN);
memcpy(sc->sc_enaddr, prop_data_data_nocopy(enaddr),
ETHER_ADDR_LEN);
bus_space_write_4(sc->sc_iot, sc->sc_ioh, EPE_AFP, 0);
bus_space_write_region_1(sc->sc_iot, sc->sc_ioh, EPE_IndAd,
sc->sc_enaddr, ETHER_ADDR_LEN);
}
ep93xx_intr_establish(sc->sc_intr, IPL_NET, epe_intr, sc);
epe_init(sc);
}
static int __noinline
npf_mk_table_entries(npf_table_t *t, prop_array_t entries)
{
prop_object_iterator_t eit;
prop_dictionary_t ent;
int error = 0;
if (prop_object_type(entries) != PROP_TYPE_ARRAY) {
return EINVAL;
}
eit = prop_array_iterator(entries);
while ((ent = prop_object_iterator_next(eit)) != NULL) {
const npf_addr_t *addr;
npf_netmask_t mask;
int alen;
/* Get address and mask. Add a table entry. */
prop_object_t obj = prop_dictionary_get(ent, "addr");
addr = (const npf_addr_t *)prop_data_data_nocopy(obj);
prop_dictionary_get_uint8(ent, "mask", &mask);
alen = prop_data_size(obj);
error = npf_table_insert(t, alen, addr, mask);
if (error)
break;
}
prop_object_iterator_release(eit);
return error;
}
static int __noinline
npf_mk_code(prop_object_t obj, int type, void **code, size_t *csize,
prop_dictionary_t errdict)
{
const void *cptr;
size_t clen;
void *bc;
if (type != NPF_CODE_BPF) {
return ENOTSUP;
}
cptr = prop_data_data_nocopy(obj);
if (cptr == NULL || (clen = prop_data_size(obj)) == 0) {
NPF_ERR_DEBUG(errdict);
return EINVAL;
}
if (!npf_bpf_validate(cptr, clen)) {
NPF_ERR_DEBUG(errdict);
return EINVAL;
}
bc = kmem_alloc(clen, KM_SLEEP);
memcpy(bc, cptr, clen);
*code = bc;
*csize = clen;
return 0;
}
const void *
npf_rule_getinfo(nl_rule_t *rl, size_t *len)
{
prop_dictionary_t rldict = rl->nrl_dict;
prop_object_t obj = prop_dictionary_get(rldict, "info");
*len = prop_data_size(obj);
return prop_data_data_nocopy(obj);
}
void
npf_nat_getmap(nl_nat_t *nt, npf_addr_t *addr, size_t *alen, in_port_t *port)
{
prop_dictionary_t rldict = nt->nrl_dict;
prop_object_t obj = prop_dictionary_get(rldict, "translation-ip");
*alen = prop_data_size(obj);
memcpy(addr, prop_data_data_nocopy(obj), *alen);
*port = 0;
prop_dictionary_get_uint16(rldict, "translation-port", port);
}
static void
emac_attach(device_t parent, device_t self, void *aux)
{
struct emac_softc *sc = device_private(self);
struct at91bus_attach_args *sa = aux;
prop_data_t enaddr;
uint32_t u;
printf("\n");
sc->sc_dev = self;
sc->sc_iot = sa->sa_iot;
sc->sc_pid = sa->sa_pid;
sc->sc_dmat = sa->sa_dmat;
if (bus_space_map(sa->sa_iot, sa->sa_addr, sa->sa_size, 0, &sc->sc_ioh))
panic("%s: Cannot map registers", device_xname(self));
/* enable peripheral clock */
at91_peripheral_clock(sc->sc_pid, 1);
/* configure emac: */
EMAC_WRITE(ETH_CTL, 0); // disable everything
EMAC_WRITE(ETH_IDR, -1); // disable interrupts
EMAC_WRITE(ETH_RBQP, 0); // clear receive
EMAC_WRITE(ETH_CFG, ETH_CFG_CLK_32 | ETH_CFG_SPD | ETH_CFG_FD | ETH_CFG_BIG);
EMAC_WRITE(ETH_TCR, 0); // send nothing
//(void)EMAC_READ(ETH_ISR);
u = EMAC_READ(ETH_TSR);
EMAC_WRITE(ETH_TSR, (u & (ETH_TSR_UND | ETH_TSR_COMP | ETH_TSR_BNQ
| ETH_TSR_IDLE | ETH_TSR_RLE
| ETH_TSR_COL|ETH_TSR_OVR)));
u = EMAC_READ(ETH_RSR);
EMAC_WRITE(ETH_RSR, (u & (ETH_RSR_OVR|ETH_RSR_REC|ETH_RSR_BNA)));
/* Fetch the Ethernet address from property if set. */
enaddr = prop_dictionary_get(device_properties(self), "mac-addr");
if (enaddr != NULL) {
KASSERT(prop_object_type(enaddr) == PROP_TYPE_DATA);
KASSERT(prop_data_size(enaddr) == ETHER_ADDR_LEN);
memcpy(sc->sc_enaddr, prop_data_data_nocopy(enaddr),
ETHER_ADDR_LEN);
} else {
static const uint8_t hardcoded[ETHER_ADDR_LEN] = {
0x00, 0x0d, 0x10, 0x81, 0x0c, 0x94
};
memcpy(sc->sc_enaddr, hardcoded, ETHER_ADDR_LEN);
}
at91_intr_establish(sc->sc_pid, IPL_NET, INTR_HIGH_LEVEL, emac_intr, sc);
emac_init(sc);
}
ssize_t
getargstr(prop_dictionary_t env, const char *key, char *buf, size_t buflen)
{
prop_data_t data;
size_t datalen;
data = (prop_data_t)prop_dictionary_get(env, key);
if (data == NULL) {
errno = ENOENT;
return -1;
}
datalen = prop_data_size(data);
if (datalen >= buflen) {
errno = ENAMETOOLONG;
return -1;
}
memset(buf, 0, buflen);
memcpy(buf, prop_data_data_nocopy(data), datalen);
return datalen;
}
int
wsdisplayio_get_edid(device_t dev, struct wsdisplayio_edid_info *d)
{
prop_data_t edid_data;
int edid_size;
edid_data = prop_dictionary_get(device_properties(dev), "EDID");
if (edid_data != NULL) {
edid_size = prop_data_size(edid_data);
/* less than 128 bytes is bogus */
if (edid_size < 128)
return ENODEV;
d->data_size = edid_size;
if (d->buffer_size < edid_size)
return EAGAIN;
return copyout(prop_data_data_nocopy(edid_data),
d->edid_data, edid_size);
}
return ENODEV;
}
/* ARGSUSED */
static void
smsh_axi_attach(device_t parent, device_t self, void *aux)
{
struct lan9118_softc *sc = device_private(self);
struct axi_attach_args *aa = aux;
prop_dictionary_t dict = device_properties(self);
void *ih;
sc->sc_dev = self;
/*
* Prefer the Ethernet address in device properties.
*/
prop_data_t ea = prop_dictionary_get(dict, "mac-address");
if (ea != NULL) {
KASSERT(prop_object_type(ea) == PROP_TYPE_DATA);
KASSERT(prop_data_size(ea) == ETHER_ADDR_LEN);
memcpy(sc->sc_enaddr, prop_data_data_nocopy(ea),
ETHER_ADDR_LEN);
sc->sc_flags |= LAN9118_FLAGS_NO_EEPROM;
}
/* Map i/o space. */
if (bus_space_map(aa->aa_iot, aa->aa_addr, LAN9118_IOSIZE, 0,
&sc->sc_ioh))
panic("smsh_axi_attach: can't map i/o space");
sc->sc_iot = aa->aa_iot;
if (lan9118_attach(sc) != 0) {
bus_space_unmap(sc->sc_iot, sc->sc_ioh, LAN9118_IOSIZE);
return;
}
/* Establish the interrupt handler. */
ih = intr_establish(aa->aa_irq, IPL_NET, IST_LEVEL,
lan9118_intr, sc);
if (ih == NULL) {
aprint_error_dev(self,
"couldn't establish interrupt handler\n");
bus_space_unmap(sc->sc_iot, sc->sc_ioh, LAN9118_IOSIZE);
return;
}
}
int
setcarp_passwd(prop_dictionary_t env, prop_dictionary_t oenv)
{
struct carpreq carpr;
prop_data_t data;
data = (prop_data_t)prop_dictionary_get(env, "pass");
if (data == NULL) {
errno = ENOENT;
return -1;
}
carp_get(env, &carpr);
memset(carpr.carpr_key, 0, sizeof(carpr.carpr_key));
/* XXX Should hash the password into the key here, perhaps? */
strlcpy((char *)carpr.carpr_key, prop_data_data_nocopy(data),
MIN(CARP_KEY_LEN, prop_data_size(data)));
carp_set(env, &carpr);
return 0;
}
static int
bthub_print(void *aux, const char *pnp)
{
prop_dictionary_t dict = aux;
prop_object_t obj;
const bdaddr_t *raddr;
if (pnp != NULL) {
obj = prop_dictionary_get(dict, BTDEVtype);
aprint_normal("%s: %s '%s',", pnp, BTDEVtype,
prop_string_cstring_nocopy(obj));
}
obj = prop_dictionary_get(dict, BTDEVraddr);
raddr = prop_data_data_nocopy(obj);
aprint_verbose(" %s %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x",
BTDEVraddr,
raddr->b[5], raddr->b[4], raddr->b[3],
raddr->b[2], raddr->b[1], raddr->b[0]);
return UNCONF;
}
static int
bthub_pioctl(dev_t devno, unsigned long cmd, prop_dictionary_t dict,
int flag, struct lwp *l)
{
prop_data_t laddr, raddr;
prop_string_t service;
prop_dictionary_t prop;
prop_object_t obj;
device_t dev, self;
deviter_t di;
int unit;
/* validate local address */
laddr = prop_dictionary_get(dict, BTDEVladdr);
if (prop_data_size(laddr) != sizeof(bdaddr_t))
return EINVAL;
/* locate the relevant bthub */
for (unit = 0 ; ; unit++) {
if (unit == bthub_cd.cd_ndevs)
return ENXIO;
self = device_lookup(&bthub_cd, unit);
if (self == NULL)
continue;
prop = device_properties(self);
obj = prop_dictionary_get(prop, BTDEVladdr);
if (prop_data_equals(laddr, obj))
break;
}
/* validate remote address */
raddr = prop_dictionary_get(dict, BTDEVraddr);
if (prop_data_size(raddr) != sizeof(bdaddr_t)
|| bdaddr_any(prop_data_data_nocopy(raddr)))
return EINVAL;
/* validate service name */
service = prop_dictionary_get(dict, BTDEVservice);
if (prop_object_type(service) != PROP_TYPE_STRING)
return EINVAL;
/* locate matching child device, if any */
deviter_init(&di, 0);
while ((dev = deviter_next(&di)) != NULL) {
if (device_parent(dev) != self)
continue;
prop = device_properties(dev);
obj = prop_dictionary_get(prop, BTDEVraddr);
if (!prop_object_equals(raddr, obj))
continue;
obj = prop_dictionary_get(prop, BTDEVservice);
if (!prop_object_equals(service, obj))
continue;
break;
}
deviter_release(&di);
switch (cmd) {
case BTDEV_ATTACH: /* attach BTDEV */
if (dev != NULL)
return EADDRINUSE;
dev = config_found(self, dict, bthub_print);
if (dev == NULL)
return ENXIO;
prop = device_properties(dev);
prop_dictionary_set(prop, BTDEVladdr, laddr);
prop_dictionary_set(prop, BTDEVraddr, raddr);
prop_dictionary_set(prop, BTDEVservice, service);
break;
case BTDEV_DETACH: /* detach BTDEV */
if (dev == NULL)
return ENXIO;
config_detach(dev, DETACH_FORCE);
break;
}
return 0;
}
/*
* ae_attach:
*
* Attach an ae interface to the system.
*/
void
ae_attach(device_t parent, device_t self, void *aux)
{
const uint8_t *enaddr;
prop_data_t ea;
struct ae_softc *sc = device_private(self);
struct arbus_attach_args *aa = aux;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
int i, error;
sc->sc_dev = self;
callout_init(&sc->sc_tick_callout, 0);
printf(": Atheros AR531X 10/100 Ethernet\n");
/*
* Try to get MAC address.
*/
ea = prop_dictionary_get(device_properties(sc->sc_dev), "mac-address");
if (ea == NULL) {
printf("%s: unable to get mac-addr property\n",
device_xname(sc->sc_dev));
return;
}
KASSERT(prop_object_type(ea) == PROP_TYPE_DATA);
KASSERT(prop_data_size(ea) == ETHER_ADDR_LEN);
enaddr = prop_data_data_nocopy(ea);
/* Announce ourselves. */
printf("%s: Ethernet address %s\n", device_xname(sc->sc_dev),
ether_sprintf(enaddr));
sc->sc_cirq = aa->aa_cirq;
sc->sc_mirq = aa->aa_mirq;
sc->sc_st = aa->aa_bst;
sc->sc_dmat = aa->aa_dmat;
SIMPLEQ_INIT(&sc->sc_txfreeq);
SIMPLEQ_INIT(&sc->sc_txdirtyq);
/*
* Map registers.
*/
sc->sc_size = aa->aa_size;
if ((error = bus_space_map(sc->sc_st, aa->aa_addr, sc->sc_size, 0,
&sc->sc_sh)) != 0) {
printf("%s: unable to map registers, error = %d\n",
device_xname(sc->sc_dev), error);
goto fail_0;
}
/*
* Allocate the control data structures, and create and load the
* DMA map for it.
*/
if ((error = bus_dmamem_alloc(sc->sc_dmat,
sizeof(struct ae_control_data), PAGE_SIZE, 0, &sc->sc_cdseg,
1, &sc->sc_cdnseg, 0)) != 0) {
printf("%s: unable to allocate control data, error = %d\n",
device_xname(sc->sc_dev), error);
goto fail_1;
}
if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg,
sizeof(struct ae_control_data), (void **)&sc->sc_control_data,
BUS_DMA_COHERENT)) != 0) {
printf("%s: unable to map control data, error = %d\n",
device_xname(sc->sc_dev), error);
goto fail_2;
}
if ((error = bus_dmamap_create(sc->sc_dmat,
sizeof(struct ae_control_data), 1,
sizeof(struct ae_control_data), 0, 0, &sc->sc_cddmamap)) != 0) {
printf("%s: unable to create control data DMA map, "
"error = %d\n", device_xname(sc->sc_dev), error);
goto fail_3;
}
if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap,
sc->sc_control_data, sizeof(struct ae_control_data), NULL,
0)) != 0) {
printf("%s: unable to load control data DMA map, error = %d\n",
device_xname(sc->sc_dev), error);
goto fail_4;
}
/*
* Create the transmit buffer DMA maps.
*/
for (i = 0; i < AE_TXQUEUELEN; i++) {
if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
AE_NTXSEGS, MCLBYTES, 0, 0,
&sc->sc_txsoft[i].txs_dmamap)) != 0) {
printf("%s: unable to create tx DMA map %d, "
"error = %d\n", device_xname(sc->sc_dev), i, error);
goto fail_5;
}
}
/*
* Create the receive buffer DMA maps.
*/
for (i = 0; i < AE_NRXDESC; i++) {
if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) {
printf("%s: unable to create rx DMA map %d, "
"error = %d\n", device_xname(sc->sc_dev), i, error);
goto fail_6;
}
sc->sc_rxsoft[i].rxs_mbuf = NULL;
}
/*
* Reset the chip to a known state.
*/
ae_reset(sc);
/*
* From this point forward, the attachment cannot fail. A failure
* before this point releases all resources that may have been
* allocated.
*/
sc->sc_flags |= AE_ATTACHED;
/*
* Initialize our media structures. This may probe the MII, if
* present.
*/
sc->sc_mii.mii_ifp = ifp;
sc->sc_mii.mii_readreg = ae_mii_readreg;
sc->sc_mii.mii_writereg = ae_mii_writereg;
sc->sc_mii.mii_statchg = ae_mii_statchg;
sc->sc_ethercom.ec_mii = &sc->sc_mii;
ifmedia_init(&sc->sc_mii.mii_media, 0, ether_mediachange,
ether_mediastatus);
mii_attach(sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
MII_OFFSET_ANY, 0);
if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
} else
ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
sc->sc_tick = ae_mii_tick;
strcpy(ifp->if_xname, device_xname(sc->sc_dev));
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
sc->sc_if_flags = ifp->if_flags;
ifp->if_ioctl = ae_ioctl;
ifp->if_start = ae_start;
ifp->if_watchdog = ae_watchdog;
ifp->if_init = ae_init;
ifp->if_stop = ae_stop;
IFQ_SET_READY(&ifp->if_snd);
/*
* We can support 802.1Q VLAN-sized frames.
*/
sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU;
/*
* Attach the interface.
*/
if_attach(ifp);
ether_ifattach(ifp, enaddr);
ether_set_ifflags_cb(&sc->sc_ethercom, ae_ifflags_cb);
rnd_attach_source(&sc->sc_rnd_source, device_xname(sc->sc_dev),
RND_TYPE_NET, RND_FLAG_DEFAULT);
/*
* Make sure the interface is shutdown during reboot.
*/
sc->sc_sdhook = shutdownhook_establish(ae_shutdown, sc);
if (sc->sc_sdhook == NULL)
printf("%s: WARNING: unable to establish shutdown hook\n",
device_xname(sc->sc_dev));
/*
* Add a suspend hook to make sure we come back up after a
* resume.
*/
sc->sc_powerhook = powerhook_establish(device_xname(sc->sc_dev),
ae_power, sc);
if (sc->sc_powerhook == NULL)
printf("%s: WARNING: unable to establish power hook\n",
device_xname(sc->sc_dev));
return;
/*
* Free any resources we've allocated during the failed attach
* attempt. Do this in reverse order and fall through.
*/
fail_6:
for (i = 0; i < AE_NRXDESC; i++) {
if (sc->sc_rxsoft[i].rxs_dmamap != NULL)
bus_dmamap_destroy(sc->sc_dmat,
sc->sc_rxsoft[i].rxs_dmamap);
}
fail_5:
for (i = 0; i < AE_TXQUEUELEN; i++) {
if (sc->sc_txsoft[i].txs_dmamap != NULL)
bus_dmamap_destroy(sc->sc_dmat,
sc->sc_txsoft[i].txs_dmamap);
}
bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap);
fail_4:
bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap);
fail_3:
bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data,
sizeof(struct ae_control_data));
fail_2:
bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg);
fail_1:
bus_space_unmap(sc->sc_st, sc->sc_sh, sc->sc_size);
fail_0:
return;
}
static int __noinline
npf_mk_tables(npf_tableset_t *tblset, prop_array_t tables,
prop_dictionary_t errdict)
{
prop_object_iterator_t it;
prop_dictionary_t tbldict;
int error = 0;
/* Tables - array. */
if (prop_object_type(tables) != PROP_TYPE_ARRAY) {
NPF_ERR_DEBUG(errdict);
return EINVAL;
}
it = prop_array_iterator(tables);
while ((tbldict = prop_object_iterator_next(it)) != NULL) {
prop_dictionary_t ent;
prop_object_iterator_t eit;
prop_array_t entries;
npf_table_t *t;
u_int tid;
int type;
/* Table - dictionary. */
if (prop_object_type(tbldict) != PROP_TYPE_DICTIONARY) {
NPF_ERR_DEBUG(errdict);
error = EINVAL;
break;
}
/* Table ID and type. */
prop_dictionary_get_uint32(tbldict, "id", &tid);
prop_dictionary_get_int32(tbldict, "type", &type);
/* Validate them, check for duplicate IDs. */
error = npf_table_check(tblset, tid, type);
if (error)
break;
/* Create and insert the table. */
t = npf_table_create(tid, type, 1024); /* XXX */
if (t == NULL) {
NPF_ERR_DEBUG(errdict);
error = ENOMEM;
break;
}
error = npf_tableset_insert(tblset, t);
KASSERT(error == 0);
/* Entries. */
entries = prop_dictionary_get(tbldict, "entries");
if (prop_object_type(entries) != PROP_TYPE_ARRAY) {
NPF_ERR_DEBUG(errdict);
error = EINVAL;
break;
}
eit = prop_array_iterator(entries);
while ((ent = prop_object_iterator_next(eit)) != NULL) {
const npf_addr_t *addr;
npf_netmask_t mask;
int alen;
/* Get address and mask. Add a table entry. */
prop_object_t obj = prop_dictionary_get(ent, "addr");
addr = (const npf_addr_t *)prop_data_data_nocopy(obj);
prop_dictionary_get_uint8(ent, "mask", &mask);
alen = prop_data_size(obj);
error = npf_table_insert(tblset, tid, alen, addr, mask);
if (error)
break;
}
prop_object_iterator_release(eit);
if (error)
break;
}
prop_object_iterator_release(it);
/*
* Note: in a case of error, caller will free the tableset.
*/
return error;
}
static void
btsco_attach(device_t parent, device_t self, void *aux)
{
struct btsco_softc *sc = device_private(self);
prop_dictionary_t dict = aux;
prop_object_t obj;
/*
* Init softc
*/
sc->sc_vgs = 200;
sc->sc_vgm = 200;
sc->sc_state = BTSCO_CLOSED;
sc->sc_name = device_xname(self);
cv_init(&sc->sc_connect, "connect");
mutex_init(&sc->sc_intr_lock, MUTEX_DEFAULT, IPL_NONE);
/*
* copy in our configuration info
*/
obj = prop_dictionary_get(dict, BTDEVladdr);
bdaddr_copy(&sc->sc_laddr, prop_data_data_nocopy(obj));
obj = prop_dictionary_get(dict, BTDEVraddr);
bdaddr_copy(&sc->sc_raddr, prop_data_data_nocopy(obj));
obj = prop_dictionary_get(dict, BTDEVservice);
if (prop_string_equals_cstring(obj, "HF")) {
sc->sc_flags |= BTSCO_LISTEN;
aprint_verbose(" listen mode");
}
obj = prop_dictionary_get(dict, BTSCOchannel);
if (prop_object_type(obj) != PROP_TYPE_NUMBER
|| prop_number_integer_value(obj) < RFCOMM_CHANNEL_MIN
|| prop_number_integer_value(obj) > RFCOMM_CHANNEL_MAX) {
aprint_error(" invalid %s", BTSCOchannel);
return;
}
sc->sc_channel = prop_number_integer_value(obj);
aprint_verbose(" channel %d", sc->sc_channel);
aprint_normal("\n");
DPRINTF("sc=%p\n", sc);
/*
* set up transmit interrupt
*/
sc->sc_intr = softint_establish(SOFTINT_NET, btsco_intr, sc);
if (sc->sc_intr == NULL) {
aprint_error_dev(self, "softint_establish failed\n");
return;
}
/*
* attach audio device
*/
sc->sc_audio = audio_attach_mi(&btsco_if, sc, self);
if (sc->sc_audio == NULL) {
aprint_error_dev(self, "audio_attach_mi failed\n");
return;
}
pmf_device_register(self, NULL, NULL);
}
static void
tlp_pci_attach(device_t parent, device_t self, void *aux)
{
struct tulip_pci_softc *psc = device_private(self);
struct tulip_softc *sc = &psc->sc_tulip;
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
pci_intr_handle_t ih;
const char *intrstr = NULL;
bus_space_tag_t iot, memt;
bus_space_handle_t ioh, memh;
int ioh_valid, memh_valid, i, j;
const struct tulip_pci_product *tpp;
prop_data_t ea;
uint8_t enaddr[ETHER_ADDR_LEN];
uint32_t val = 0;
pcireg_t reg;
int error;
bus_size_t iosize = 0, memsize = 0;
sc->sc_dev = self;
sc->sc_devno = pa->pa_device;
psc->sc_pc = pa->pa_pc;
psc->sc_pcitag = pa->pa_tag;
LIST_INIT(&psc->sc_intrslaves);
tpp = tlp_pci_lookup(pa);
if (tpp == NULL) {
printf("\n");
panic("tlp_pci_attach: impossible");
}
sc->sc_chip = tpp->tpp_chip;
/*
* By default, Tulip registers are 8 bytes long (4 bytes
* followed by a 4 byte pad).
*/
sc->sc_regshift = 3;
/*
* No power management hooks.
* XXX Maybe we should add some!
*/
sc->sc_flags |= TULIPF_ENABLED;
/*
* Get revision info, and set some chip-specific variables.
*/
sc->sc_rev = PCI_REVISION(pa->pa_class);
switch (sc->sc_chip) {
case TULIP_CHIP_21140:
if (sc->sc_rev >= 0x20)
sc->sc_chip = TULIP_CHIP_21140A;
break;
case TULIP_CHIP_21142:
if (sc->sc_rev >= 0x20)
sc->sc_chip = TULIP_CHIP_21143;
break;
case TULIP_CHIP_82C168:
if (sc->sc_rev >= 0x20)
sc->sc_chip = TULIP_CHIP_82C169;
break;
case TULIP_CHIP_MX98713:
if (sc->sc_rev >= 0x10)
sc->sc_chip = TULIP_CHIP_MX98713A;
break;
case TULIP_CHIP_MX98715:
if (sc->sc_rev >= 0x20)
sc->sc_chip = TULIP_CHIP_MX98715A;
if (sc->sc_rev >= 0x25)
sc->sc_chip = TULIP_CHIP_MX98715AEC_X;
if (sc->sc_rev >= 0x30)
sc->sc_chip = TULIP_CHIP_MX98725;
break;
case TULIP_CHIP_WB89C840F:
sc->sc_regshift = 2;
break;
case TULIP_CHIP_AN985:
/*
* The AN983 and AN985 are very similar, and are
* differentiated by a "signature" register that
* is like, but not identical, to a PCI ID register.
*/
reg = pci_conf_read(pc, pa->pa_tag, 0x80);
switch (reg) {
case 0x09811317:
sc->sc_chip = TULIP_CHIP_AN985;
break;
case 0x09851317:
sc->sc_chip = TULIP_CHIP_AN983;
break;
default:
/* Unknown -- use default. */
break;
}
break;
case TULIP_CHIP_AX88140:
if (sc->sc_rev >= 0x10)
sc->sc_chip = TULIP_CHIP_AX88141;
break;
case TULIP_CHIP_DM9102:
if (sc->sc_rev >= 0x30)
sc->sc_chip = TULIP_CHIP_DM9102A;
break;
default:
/* Nothing. */
break;
}
aprint_normal(": %s Ethernet, pass %d.%d\n",
tlp_chip_name(sc->sc_chip),
(sc->sc_rev >> 4) & 0xf, sc->sc_rev & 0xf);
switch (sc->sc_chip) {
case TULIP_CHIP_21040:
if (sc->sc_rev < 0x20) {
aprint_normal_dev(self,
"21040 must be at least pass 2.0\n");
return;
}
break;
case TULIP_CHIP_21140:
if (sc->sc_rev < 0x11) {
aprint_normal_dev(self,
"21140 must be at least pass 1.1\n");
return;
}
break;
default:
/* Nothing. */
break;
}
/*
* Check to see if the device is in power-save mode, and
* being it out if necessary.
*/
switch (sc->sc_chip) {
case TULIP_CHIP_21140:
case TULIP_CHIP_21140A:
case TULIP_CHIP_21142:
case TULIP_CHIP_21143:
case TULIP_CHIP_MX98713A:
case TULIP_CHIP_MX98715:
case TULIP_CHIP_MX98715A:
case TULIP_CHIP_MX98715AEC_X:
case TULIP_CHIP_MX98725:
case TULIP_CHIP_DM9102:
case TULIP_CHIP_DM9102A:
case TULIP_CHIP_AX88140:
case TULIP_CHIP_AX88141:
case TULIP_CHIP_RS7112:
/*
* Clear the "sleep mode" bit in the CFDA register.
*/
reg = pci_conf_read(pc, pa->pa_tag, TULIP_PCI_CFDA);
if (reg & (CFDA_SLEEP|CFDA_SNOOZE))
pci_conf_write(pc, pa->pa_tag, TULIP_PCI_CFDA,
reg & ~(CFDA_SLEEP|CFDA_SNOOZE));
break;
default:
/* Nothing. */
break;
}
/* power up chip */
if ((error = pci_activate(pa->pa_pc, pa->pa_tag, self,
NULL)) && error != EOPNOTSUPP) {
aprint_error_dev(self, "cannot activate %d\n",
error);
return;
}
/*
* Map the device.
*/
ioh_valid = (pci_mapreg_map(pa, TULIP_PCI_IOBA,
PCI_MAPREG_TYPE_IO, 0,
&iot, &ioh, NULL, &iosize) == 0);
memh_valid = (pci_mapreg_map(pa, TULIP_PCI_MMBA,
PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
&memt, &memh, NULL, &memsize) == 0);
if (memh_valid) {
sc->sc_st = memt;
sc->sc_sh = memh;
psc->sc_mapsize = memsize;
if (ioh_valid) {
bus_space_unmap(iot, ioh, iosize);
ioh_valid = 0;
}
} else if (ioh_valid) {
sc->sc_st = iot;
sc->sc_sh = ioh;
psc->sc_mapsize = iosize;
if (memh_valid) {
bus_space_unmap(memt, memh, memsize);
memh_valid = 0;
}
} else {
aprint_error_dev(self, "unable to map device registers\n");
goto fail;
}
sc->sc_dmat = pa->pa_dmat;
/*
* Make sure bus mastering is enabled.
*/
pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG) |
PCI_COMMAND_MASTER_ENABLE);
/*
* Get the cacheline size.
*/
sc->sc_cacheline = PCI_CACHELINE(pci_conf_read(pc, pa->pa_tag,
PCI_BHLC_REG));
/*
* Get PCI data moving command info.
*/
if (pa->pa_flags & PCI_FLAGS_MRL_OKAY)
sc->sc_flags |= TULIPF_MRL;
if (pa->pa_flags & PCI_FLAGS_MRM_OKAY)
sc->sc_flags |= TULIPF_MRM;
if (pa->pa_flags & PCI_FLAGS_MWI_OKAY)
sc->sc_flags |= TULIPF_MWI;
/*
* Read the contents of the Ethernet Address ROM/SROM.
*/
switch (sc->sc_chip) {
case TULIP_CHIP_21040:
sc->sc_srom_addrbits = 6;
sc->sc_srom = malloc(TULIP_ROM_SIZE(6), M_DEVBUF, M_NOWAIT);
TULIP_WRITE(sc, CSR_MIIROM, MIIROM_SROMCS);
for (i = 0; i < TULIP_ROM_SIZE(6); i++) {
for (j = 0; j < 10000; j++) {
val = TULIP_READ(sc, CSR_MIIROM);
if ((val & MIIROM_DN) == 0)
break;
}
sc->sc_srom[i] = val & MIIROM_DATA;
}
break;
case TULIP_CHIP_82C168:
case TULIP_CHIP_82C169:
{
sc->sc_srom_addrbits = 2;
sc->sc_srom = malloc(TULIP_ROM_SIZE(2), M_DEVBUF, M_NOWAIT);
/*
* The Lite-On PNIC stores the Ethernet address in
* the first 3 words of the EEPROM. EEPROM access
* is not like the other Tulip chips.
*/
for (i = 0; i < 6; i += 2) {
TULIP_WRITE(sc, CSR_PNIC_SROMCTL,
PNIC_SROMCTL_READ | (i >> 1));
for (j = 0; j < 500; j++) {
delay(2);
val = TULIP_READ(sc, CSR_MIIROM);
if ((val & PNIC_MIIROM_BUSY) == 0)
break;
}
if (val & PNIC_MIIROM_BUSY) {
aprint_error_dev(self, "EEPROM timed out\n");
goto fail;
}
val &= PNIC_MIIROM_DATA;
sc->sc_srom[i] = val >> 8;
sc->sc_srom[i + 1] = val & 0xff;
}
break;
}
default:
/*
* XXX This isn't quite the right way to do this; we should
* XXX be attempting to fetch the mac-addr property in the
* XXX bus-agnostic part of the driver independently. But
* XXX that requires a larger change in the SROM handling
* XXX logic, and for now we can at least remove a machine-
* XXX dependent wart from the PCI front-end.
*/
ea = prop_dictionary_get(device_properties(self),
"mac-address");
if (ea != NULL) {
extern int tlp_srom_debug;
KASSERT(prop_object_type(ea) == PROP_TYPE_DATA);
KASSERT(prop_data_size(ea) == ETHER_ADDR_LEN);
memcpy(enaddr, prop_data_data_nocopy(ea),
ETHER_ADDR_LEN);
sc->sc_srom_addrbits = 6;
sc->sc_srom = malloc(TULIP_ROM_SIZE(6), M_DEVBUF,
M_NOWAIT|M_ZERO);
memcpy(sc->sc_srom, enaddr, sizeof(enaddr));
if (tlp_srom_debug) {
aprint_normal("SROM CONTENTS:");
for (i = 0; i < TULIP_ROM_SIZE(6); i++) {
if ((i % 8) == 0)
aprint_normal("\n\t");
aprint_normal("0x%02x ", sc->sc_srom[i]);
}
aprint_normal("\n");
}
break;
}
/* Check for a slaved ROM on a multi-port board. */
tlp_pci_check_slaved(psc, TULIP_PCI_SHAREDROM,
TULIP_PCI_SLAVEROM);
if (psc->sc_flags & TULIP_PCI_SLAVEROM) {
sc->sc_srom_addrbits =
psc->sc_master->sc_tulip.sc_srom_addrbits;
sc->sc_srom = psc->sc_master->sc_tulip.sc_srom;
enaddr[5] +=
sc->sc_devno - psc->sc_master->sc_tulip.sc_devno;
}
else if (tlp_read_srom(sc) == 0)
goto cant_cope;
break;
}
/*
* Deal with chip/board quirks. This includes setting up
* the mediasw, and extracting the Ethernet address from
* the rombuf.
*/
switch (sc->sc_chip) {
case TULIP_CHIP_21040:
/*
* Parse the Ethernet Address ROM.
*/
if (tlp_parse_old_srom(sc, enaddr) == 0)
goto cant_cope;
/*
* All 21040 boards start out with the same
* media switch.
*/
sc->sc_mediasw = &tlp_21040_mediasw;
/*
* Deal with any quirks this board might have.
*/
tlp_pci_get_quirks(psc, enaddr, tlp_pci_21040_quirks);
break;
case TULIP_CHIP_21041:
/* Check for new format SROM. */
if (tlp_isv_srom_enaddr(sc, enaddr) == 0) {
/*
* Not an ISV SROM; try the old DEC Ethernet Address
* ROM format.
*/
if (tlp_parse_old_srom(sc, enaddr) == 0)
goto cant_cope;
}
/*
* All 21041 boards use the same media switch; they all
* work basically the same! Yippee!
*/
sc->sc_mediasw = &tlp_21041_mediasw;
/*
* Deal with any quirks this board might have.
*/
tlp_pci_get_quirks(psc, enaddr, tlp_pci_21041_quirks);
break;
case TULIP_CHIP_21140:
case TULIP_CHIP_21140A:
/* Check for new format SROM. */
if (tlp_isv_srom_enaddr(sc, enaddr) == 0) {
/*
* Not an ISV SROM; try the old DEC Ethernet Address
* ROM format.
*/
if (tlp_parse_old_srom(sc, enaddr) == 0)
goto cant_cope;
} else {
/*
* We start out with the 2114x ISV media switch.
* When we search for quirks, we may change to
* a different switch.
*/
sc->sc_mediasw = &tlp_2114x_isv_mediasw;
}
/*
* Deal with any quirks this board might have.
*/
tlp_pci_get_quirks(psc, enaddr, tlp_pci_21140_quirks);
/*
* Bail out now if we can't deal with this board.
*/
if (sc->sc_mediasw == NULL)
goto cant_cope;
break;
case TULIP_CHIP_21142:
case TULIP_CHIP_21143:
/* Check for new format SROM. */
if (tlp_isv_srom_enaddr(sc, enaddr) == 0) {
/*
* Not an ISV SROM; try the old DEC Ethernet Address
* ROM format.
*/
if (tlp_parse_old_srom(sc, enaddr) == 0) {
/*
* One last try: just copy the address
* from offset 20 and try to look
* up quirks.
*/
memcpy(enaddr, &sc->sc_srom[20],
ETHER_ADDR_LEN);
}
} else {
/*
* We start out with the 2114x ISV media switch.
* When we search for quirks, we may change to
* a different switch.
*/
sc->sc_mediasw = &tlp_2114x_isv_mediasw;
}
/*
* Deal with any quirks this board might have.
*/
tlp_pci_get_quirks(psc, enaddr, tlp_pci_21142_quirks);
/*
* Bail out now if we can't deal with this board.
*/
if (sc->sc_mediasw == NULL)
goto cant_cope;
break;
case TULIP_CHIP_82C168:
case TULIP_CHIP_82C169:
/*
* Lite-On PNIC's Ethernet address is the first 6
* bytes of its EEPROM.
*/
memcpy(enaddr, sc->sc_srom, ETHER_ADDR_LEN);
/*
* Lite-On PNICs always use the same mediasw; we
* select MII vs. internal NWAY automatically.
*/
sc->sc_mediasw = &tlp_pnic_mediasw;
break;
case TULIP_CHIP_MX98713:
/*
* The Macronix MX98713 has an MII and GPIO, but no
* internal Nway block. This chip is basically a
* perfect 21140A clone, with the exception of the
* a magic register frobbing in order to make the
* interface function.
*/
if (tlp_isv_srom_enaddr(sc, enaddr)) {
sc->sc_mediasw = &tlp_2114x_isv_mediasw;
break;
}
/* FALLTHROUGH */
case TULIP_CHIP_82C115:
/*
* Yippee! The Lite-On 82C115 is a clone of
* the MX98725 (the data sheet even says `MXIC'
* on it)! Imagine that, a clone of a clone.
*
* The differences are really minimal:
*
* - Wake-On-LAN support
* - 128-bit multicast hash table, rather than
* the standard 512-bit hash table
*/
/* FALLTHROUGH */
case TULIP_CHIP_MX98713A:
case TULIP_CHIP_MX98715A:
case TULIP_CHIP_MX98715AEC_X:
case TULIP_CHIP_MX98725:
/*
* The MX98713A has an MII as well as an internal Nway block,
* but no GPIO. The MX98715 and MX98725 have an internal
* Nway block only.
*
* The internal Nway block, unlike the Lite-On PNIC's, does
* just that - performs Nway. Once autonegotiation completes,
* we must program the GPR media information into the chip.
*
* The byte offset of the Ethernet address is stored at
* offset 0x70.
*/
memcpy(enaddr, &sc->sc_srom[sc->sc_srom[0x70]], ETHER_ADDR_LEN);
sc->sc_mediasw = &tlp_pmac_mediasw;
break;
case TULIP_CHIP_WB89C840F:
/*
* Winbond 89C840F's Ethernet address is the first
* 6 bytes of its EEPROM.
*/
memcpy(enaddr, sc->sc_srom, ETHER_ADDR_LEN);
/*
* Winbond 89C840F has an MII attached to the SIO.
*/
sc->sc_mediasw = &tlp_sio_mii_mediasw;
break;
case TULIP_CHIP_AL981:
/*
* The ADMtek AL981's Ethernet address is located
* at offset 8 of its EEPROM.
*/
memcpy(enaddr, &sc->sc_srom[8], ETHER_ADDR_LEN);
/*
* ADMtek AL981 has a built-in PHY accessed through
* special registers.
*/
sc->sc_mediasw = &tlp_al981_mediasw;
break;
case TULIP_CHIP_AN983:
case TULIP_CHIP_AN985:
/*
* The ADMtek AN985's Ethernet address is located
* at offset 8 of its EEPROM.
*/
memcpy(enaddr, &sc->sc_srom[8], ETHER_ADDR_LEN);
/*
* The ADMtek AN985 can be configured in Single-Chip
* mode or MAC-only mode. Single-Chip uses the built-in
* PHY, MAC-only has an external PHY (usually HomePNA).
* The selection is based on an EEPROM setting, and both
* PHYs are accessed via MII attached to SIO.
*
* The AN985 "ghosts" the internal PHY onto all
* MII addresses, so we have to use a media init
* routine that limits the search.
* XXX How does this work with MAC-only mode?
*/
sc->sc_mediasw = &tlp_an985_mediasw;
break;
case TULIP_CHIP_DM9102:
case TULIP_CHIP_DM9102A:
/*
* Some boards with the Davicom chip have an ISV
* SROM (mostly DM9102A boards -- trying to describe
* the HomePNA PHY, probably) although the data in
* them is generally wrong. Check for ISV format
* and grab the Ethernet address that way, and if
* that fails, fall back on grabbing it from an
* observed offset of 20 (which is where it would
* be in an ISV SROM anyhow, tho ISV can cope with
* multi-port boards).
*/
if (!tlp_isv_srom_enaddr(sc, enaddr)) {
prop_data_t eaddrprop;
eaddrprop = prop_dictionary_get(
device_properties(self), "mac-address");
if (eaddrprop != NULL
&& prop_data_size(eaddrprop) == ETHER_ADDR_LEN)
memcpy(enaddr,
prop_data_data_nocopy(eaddrprop),
ETHER_ADDR_LEN);
else
memcpy(enaddr, &sc->sc_srom[20],
ETHER_ADDR_LEN);
}
/*
* Davicom chips all have an internal MII interface
* and a built-in PHY. DM9102A also has a an external
* MII interface, usually with a HomePNA PHY attached
* to it.
*/
sc->sc_mediasw = &tlp_dm9102_mediasw;
break;
case TULIP_CHIP_AX88140:
case TULIP_CHIP_AX88141:
/*
* ASIX AX88140/AX88141 Ethernet Address is located at offset
* 20 of the SROM.
*/
memcpy(enaddr, &sc->sc_srom[20], ETHER_ADDR_LEN);
/*
* ASIX AX88140A/AX88141 chip can have a built-in PHY or
* an external MII interface.
*/
sc->sc_mediasw = &tlp_asix_mediasw;
break;
case TULIP_CHIP_RS7112:
/*
* RS7112 Ethernet Address is located of offset 0x19a
* of the SROM
*/
memcpy(enaddr, &sc->sc_srom[0x19a], ETHER_ADDR_LEN);
/* RS7112 chip has a PHY at MII address 1 */
sc->sc_mediasw = &tlp_rs7112_mediasw;
break;
default:
cant_cope:
aprint_error_dev(self, "sorry, unable to handle your board\n");
goto fail;
}
/*
* Handle shared interrupts.
*/
if (psc->sc_flags & TULIP_PCI_SHAREDINTR) {
if (psc->sc_master)
psc->sc_flags |= TULIP_PCI_SLAVEINTR;
else {
tlp_pci_check_slaved(psc, TULIP_PCI_SHAREDINTR,
TULIP_PCI_SLAVEINTR);
if (psc->sc_master == NULL)
psc->sc_master = psc;
}
LIST_INSERT_HEAD(&psc->sc_master->sc_intrslaves,
psc, sc_intrq);
}
if (psc->sc_flags & TULIP_PCI_SLAVEINTR) {
aprint_normal_dev(self, "sharing interrupt with %s\n",
device_xname(psc->sc_master->sc_tulip.sc_dev));
} else {
/*
* Map and establish our interrupt.
*/
if (pci_intr_map(pa, &ih)) {
aprint_error_dev(self, "unable to map interrupt\n");
goto fail;
}
intrstr = pci_intr_string(pc, ih);
psc->sc_ih = pci_intr_establish(pc, ih, IPL_NET,
(psc->sc_flags & TULIP_PCI_SHAREDINTR) ?
tlp_pci_shared_intr : tlp_intr, sc);
if (psc->sc_ih == NULL) {
aprint_error_dev(self, "unable to establish interrupt");
if (intrstr != NULL)
aprint_error(" at %s", intrstr);
aprint_error("\n");
goto fail;
}
aprint_normal_dev(self, "interrupting at %s\n",
intrstr);
}
/*
* Finish off the attach.
*/
error = tlp_attach(sc, enaddr);
if (error)
goto fail;
return;
fail:
if (psc->sc_ih != NULL) {
pci_intr_disestablish(psc->sc_pc, psc->sc_ih);
psc->sc_ih = NULL;
}
if (ioh_valid)
bus_space_unmap(iot, ioh, iosize);
if (memh_valid)
bus_space_unmap(memt, memh, memsize);
psc->sc_mapsize = 0;
return;
}
/*
* npfctl_rule: add or remove dynamic rules in the specified ruleset.
*/
int
npfctl_rule(u_long cmd, void *data)
{
struct plistref *pref = data;
prop_dictionary_t npf_rule, retdict = NULL;
npf_ruleset_t *rlset;
npf_rule_t *rl = NULL;
const char *ruleset_name;
uint32_t rcmd = 0;
int error;
error = prop_dictionary_copyin_ioctl(pref, cmd, &npf_rule);
if (error) {
return error;
}
prop_dictionary_get_uint32(npf_rule, "command", &rcmd);
if (!prop_dictionary_get_cstring_nocopy(npf_rule,
"ruleset-name", &ruleset_name)) {
error = EINVAL;
goto out;
}
if (rcmd == NPF_CMD_RULE_ADD) {
retdict = prop_dictionary_create();
if (npf_mk_singlerule(npf_rule, NULL, &rl, retdict) != 0) {
error = EINVAL;
goto out;
}
}
npf_config_enter();
rlset = npf_config_ruleset();
switch (rcmd) {
case NPF_CMD_RULE_ADD: {
if ((error = npf_ruleset_add(rlset, ruleset_name, rl)) == 0) {
/* Success. */
uint64_t id = npf_rule_getid(rl);
prop_dictionary_set_uint64(retdict, "id", id);
rl = NULL;
}
break;
}
case NPF_CMD_RULE_REMOVE: {
uint64_t id;
if (!prop_dictionary_get_uint64(npf_rule, "id", &id)) {
error = EINVAL;
break;
}
error = npf_ruleset_remove(rlset, ruleset_name, id);
break;
}
case NPF_CMD_RULE_REMKEY: {
prop_object_t obj = prop_dictionary_get(npf_rule, "key");
const void *key = prop_data_data_nocopy(obj);
size_t len = prop_data_size(obj);
if (len == 0 || len > NPF_RULE_MAXKEYLEN) {
error = EINVAL;
break;
}
error = npf_ruleset_remkey(rlset, ruleset_name, key, len);
break;
}
case NPF_CMD_RULE_LIST: {
retdict = npf_ruleset_list(rlset, ruleset_name);
if (!retdict) {
error = ESRCH;
}
break;
}
case NPF_CMD_RULE_FLUSH: {
error = npf_ruleset_flush(rlset, ruleset_name);
break;
}
default:
error = EINVAL;
break;
}
/* Destroy any removed rules. */
if (!error && rcmd != NPF_CMD_RULE_ADD && rcmd != NPF_CMD_RULE_LIST) {
npf_config_sync();
npf_ruleset_gc(rlset);
}
npf_config_exit();
if (rl) {
KASSERT(error);
npf_rule_free(rl);
}
out:
if (retdict) {
prop_object_release(npf_rule);
prop_dictionary_copyout_ioctl(pref, cmd, retdict);
prop_object_release(retdict);
}
return error;
}
void
smsc_attach(device_t parent, device_t self, void *aux)
{
struct smsc_softc *sc = device_private(self);
struct usb_attach_arg *uaa = aux;
usbd_device_handle dev = uaa->device;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
char *devinfop;
struct mii_data *mii;
struct ifnet *ifp;
int err, s, i;
uint32_t mac_h, mac_l;
sc->sc_dev = self;
sc->sc_udev = dev;
aprint_naive("\n");
aprint_normal("\n");
devinfop = usbd_devinfo_alloc(sc->sc_udev, 0);
aprint_normal_dev(self, "%s\n", devinfop);
usbd_devinfo_free(devinfop);
err = usbd_set_config_no(dev, SMSC_CONFIG_INDEX, 1);
if (err) {
aprint_error_dev(self, "failed to set configuration"
", err=%s\n", usbd_errstr(err));
return;
}
/* Setup the endpoints for the SMSC LAN95xx device(s) */
usb_init_task(&sc->sc_tick_task, smsc_tick_task, sc, 0);
usb_init_task(&sc->sc_stop_task, (void (*)(void *))smsc_stop, sc, 0);
mutex_init(&sc->sc_mii_lock, MUTEX_DEFAULT, IPL_NONE);
err = usbd_device2interface_handle(dev, SMSC_IFACE_IDX, &sc->sc_iface);
if (err) {
aprint_error_dev(self, "getting interface handle failed\n");
return;
}
id = usbd_get_interface_descriptor(sc->sc_iface);
if (sc->sc_udev->speed >= USB_SPEED_HIGH)
sc->sc_bufsz = SMSC_MAX_BUFSZ;
else
sc->sc_bufsz = SMSC_MIN_BUFSZ;
/* Find endpoints. */
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (!ed) {
aprint_error_dev(self, "couldn't get ep %d\n", i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_ed[SMSC_ENDPT_RX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_ed[SMSC_ENDPT_TX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->sc_ed[SMSC_ENDPT_INTR] = ed->bEndpointAddress;
}
}
s = splnet();
ifp = &sc->sc_ec.ec_if;
ifp->if_softc = sc;
strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ);
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_init = smsc_init;
ifp->if_ioctl = smsc_ioctl;
ifp->if_start = smsc_start;
ifp->if_stop = smsc_stop;
#ifdef notyet
/*
* We can do TCPv4, and UDPv4 checksums in hardware.
*/
ifp->if_capabilities |=
/*IFCAP_CSUM_TCPv4_Tx |*/ IFCAP_CSUM_TCPv4_Rx |
/*IFCAP_CSUM_UDPv4_Tx |*/ IFCAP_CSUM_UDPv4_Rx;
#endif
sc->sc_ec.ec_capabilities = ETHERCAP_VLAN_MTU;
/* Setup some of the basics */
sc->sc_phyno = 1;
/*
* Attempt to get the mac address, if an EEPROM is not attached this
* will just return FF:FF:FF:FF:FF:FF, so in such cases we invent a MAC
* address based on urandom.
*/
memset(sc->sc_enaddr, 0xff, ETHER_ADDR_LEN);
prop_dictionary_t dict = device_properties(self);
prop_data_t eaprop = prop_dictionary_get(dict, "mac-address");
if (eaprop != NULL) {
KASSERT(prop_object_type(eaprop) == PROP_TYPE_DATA);
KASSERT(prop_data_size(eaprop) == ETHER_ADDR_LEN);
memcpy(sc->sc_enaddr, prop_data_data_nocopy(eaprop),
ETHER_ADDR_LEN);
} else
/* Check if there is already a MAC address in the register */
if ((smsc_read_reg(sc, SMSC_MAC_ADDRL, &mac_l) == 0) &&
(smsc_read_reg(sc, SMSC_MAC_ADDRH, &mac_h) == 0)) {
sc->sc_enaddr[5] = (uint8_t)((mac_h >> 8) & 0xff);
sc->sc_enaddr[4] = (uint8_t)((mac_h) & 0xff);
sc->sc_enaddr[3] = (uint8_t)((mac_l >> 24) & 0xff);
sc->sc_enaddr[2] = (uint8_t)((mac_l >> 16) & 0xff);
sc->sc_enaddr[1] = (uint8_t)((mac_l >> 8) & 0xff);
sc->sc_enaddr[0] = (uint8_t)((mac_l) & 0xff);
}
static void
bthidev_attach(device_t parent, device_t self, void *aux)
{
struct bthidev_softc *sc = device_private(self);
prop_dictionary_t dict = aux;
prop_object_t obj;
device_t dev;
struct bthidev_attach_args bha;
struct bthidev *hidev;
struct hid_data *d;
struct hid_item h;
const void *desc;
int locs[BTHIDBUSCF_NLOCS];
int maxid, rep, dlen;
/*
* Init softc
*/
sc->sc_dev = self;
LIST_INIT(&sc->sc_list);
callout_init(&sc->sc_reconnect, 0);
callout_setfunc(&sc->sc_reconnect, bthidev_timeout, sc);
sc->sc_state = BTHID_CLOSED;
sc->sc_flags = BTHID_CONNECTING;
sc->sc_ctlpsm = L2CAP_PSM_HID_CNTL;
sc->sc_intpsm = L2CAP_PSM_HID_INTR;
sockopt_init(&sc->sc_mode, BTPROTO_L2CAP, SO_L2CAP_LM, 0);
/*
* extract config from proplist
*/
obj = prop_dictionary_get(dict, BTDEVladdr);
bdaddr_copy(&sc->sc_laddr, prop_data_data_nocopy(obj));
obj = prop_dictionary_get(dict, BTDEVraddr);
bdaddr_copy(&sc->sc_raddr, prop_data_data_nocopy(obj));
obj = prop_dictionary_get(dict, BTDEVmode);
if (prop_object_type(obj) == PROP_TYPE_STRING) {
if (prop_string_equals_cstring(obj, BTDEVauth))
sockopt_setint(&sc->sc_mode, L2CAP_LM_AUTH);
else if (prop_string_equals_cstring(obj, BTDEVencrypt))
sockopt_setint(&sc->sc_mode, L2CAP_LM_ENCRYPT);
else if (prop_string_equals_cstring(obj, BTDEVsecure))
sockopt_setint(&sc->sc_mode, L2CAP_LM_SECURE);
else {
aprint_error(" unknown %s\n", BTDEVmode);
return;
}
aprint_verbose(" %s %s", BTDEVmode,
prop_string_cstring_nocopy(obj));
}
obj = prop_dictionary_get(dict, BTHIDEVcontrolpsm);
if (prop_object_type(obj) == PROP_TYPE_NUMBER) {
sc->sc_ctlpsm = prop_number_integer_value(obj);
if (L2CAP_PSM_INVALID(sc->sc_ctlpsm)) {
aprint_error(" invalid %s\n", BTHIDEVcontrolpsm);
return;
}
}
obj = prop_dictionary_get(dict, BTHIDEVinterruptpsm);
if (prop_object_type(obj) == PROP_TYPE_NUMBER) {
sc->sc_intpsm = prop_number_integer_value(obj);
if (L2CAP_PSM_INVALID(sc->sc_intpsm)) {
aprint_error(" invalid %s\n", BTHIDEVinterruptpsm);
return;
}
}
obj = prop_dictionary_get(dict, BTHIDEVdescriptor);
if (prop_object_type(obj) == PROP_TYPE_DATA) {
dlen = prop_data_size(obj);
desc = prop_data_data_nocopy(obj);
} else {
aprint_error(" no %s\n", BTHIDEVdescriptor);
return;
}
obj = prop_dictionary_get(dict, BTHIDEVreconnect);
if (prop_object_type(obj) == PROP_TYPE_BOOL
&& !prop_bool_true(obj))
sc->sc_flags |= BTHID_RECONNECT;
/*
* Parse the descriptor and attach child devices, one per report.
*/
maxid = -1;
h.report_ID = 0;
d = hid_start_parse(desc, dlen, hid_none);
while (hid_get_item(d, &h)) {
if (h.report_ID > maxid)
maxid = h.report_ID;
}
hid_end_parse(d);
if (maxid < 0) {
aprint_error(" no reports found\n");
return;
}
aprint_normal("\n");
for (rep = 0 ; rep <= maxid ; rep++) {
if (hid_report_size(desc, dlen, hid_feature, rep) == 0
&& hid_report_size(desc, dlen, hid_input, rep) == 0
&& hid_report_size(desc, dlen, hid_output, rep) == 0)
continue;
bha.ba_desc = desc;
bha.ba_dlen = dlen;
bha.ba_input = bthidev_null;
bha.ba_feature = bthidev_null;
bha.ba_output = bthidev_output;
bha.ba_id = rep;
locs[BTHIDBUSCF_REPORTID] = rep;
dev = config_found_sm_loc(self, "bthidbus",
locs, &bha, bthidev_print, config_stdsubmatch);
if (dev != NULL) {
hidev = device_private(dev);
hidev->sc_dev = dev;
hidev->sc_parent = self;
hidev->sc_id = rep;
hidev->sc_input = bha.ba_input;
hidev->sc_feature = bha.ba_feature;
LIST_INSERT_HEAD(&sc->sc_list, hidev, sc_next);
}
}
/*
* start bluetooth connections
*/
mutex_enter(bt_lock);
if ((sc->sc_flags & BTHID_RECONNECT) == 0)
bthidev_listen(sc);
if (sc->sc_flags & BTHID_CONNECTING)
bthidev_connect(sc);
mutex_exit(bt_lock);
}
static void
admsw_attach(device_t parent, device_t self, void *aux)
{
uint8_t enaddr[ETHER_ADDR_LEN];
struct admsw_softc *sc = device_private(self);
struct obio_attach_args *aa = aux;
struct ifnet *ifp;
bus_dma_segment_t seg;
int error, i, rseg;
prop_data_t pd;
printf(": ADM5120 Switch Engine, %d ports\n", SW_DEVS);
sc->sc_dev = self;
sc->sc_dmat = aa->oba_dt;
sc->sc_st = aa->oba_st;
pd = prop_dictionary_get(device_properties(self), "mac-address");
if (pd == NULL) {
enaddr[0] = 0x02;
enaddr[1] = 0xaa;
enaddr[2] = 0xbb;
enaddr[3] = 0xcc;
enaddr[4] = 0xdd;
enaddr[5] = 0xee;
} else
memcpy(enaddr, prop_data_data_nocopy(pd), sizeof(enaddr));
memcpy(sc->sc_enaddr, enaddr, sizeof(sc->sc_enaddr));
printf("%s: base Ethernet address %s\n", device_xname(sc->sc_dev),
ether_sprintf(enaddr));
/* Map the device. */
if (bus_space_map(sc->sc_st, aa->oba_addr, 512, 0, &sc->sc_ioh) != 0) {
printf("%s: unable to map device\n", device_xname(sc->sc_dev));
return;
}
/* Hook up the interrupt handler. */
sc->sc_ih = adm5120_intr_establish(aa->oba_irq, INTR_IRQ, admsw_intr, sc);
if (sc->sc_ih == NULL) {
printf("%s: unable to register interrupt handler\n",
device_xname(sc->sc_dev));
return;
}
/*
* Allocate the control data structures, and create and load the
* DMA map for it.
*/
if ((error = bus_dmamem_alloc(sc->sc_dmat,
sizeof(struct admsw_control_data), PAGE_SIZE, 0, &seg, 1, &rseg,
0)) != 0) {
printf("%s: unable to allocate control data, error = %d\n",
device_xname(sc->sc_dev), error);
return;
}
if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
sizeof(struct admsw_control_data), (void *)&sc->sc_control_data,
0)) != 0) {
printf("%s: unable to map control data, error = %d\n",
device_xname(sc->sc_dev), error);
return;
}
if ((error = bus_dmamap_create(sc->sc_dmat,
sizeof(struct admsw_control_data), 1,
sizeof(struct admsw_control_data), 0, 0, &sc->sc_cddmamap)) != 0) {
printf("%s: unable to create control data DMA map, "
"error = %d\n", device_xname(sc->sc_dev), error);
return;
}
if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap,
sc->sc_control_data, sizeof(struct admsw_control_data), NULL,
0)) != 0) {
printf("%s: unable to load control data DMA map, error = %d\n",
device_xname(sc->sc_dev), error);
return;
}
/*
* Create the transmit buffer DMA maps.
*/
for (i = 0; i < ADMSW_NTXHDESC; i++) {
if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
2, MCLBYTES, 0, 0,
&sc->sc_txhsoft[i].ds_dmamap)) != 0) {
printf("%s: unable to create txh DMA map %d, "
"error = %d\n", device_xname(sc->sc_dev), i, error);
return;
}
sc->sc_txhsoft[i].ds_mbuf = NULL;
}
for (i = 0; i < ADMSW_NTXLDESC; i++) {
if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
2, MCLBYTES, 0, 0,
&sc->sc_txlsoft[i].ds_dmamap)) != 0) {
printf("%s: unable to create txl DMA map %d, "
"error = %d\n", device_xname(sc->sc_dev), i, error);
return;
}
sc->sc_txlsoft[i].ds_mbuf = NULL;
}
/*
* Create the receive buffer DMA maps.
*/
for (i = 0; i < ADMSW_NRXHDESC; i++) {
if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
MCLBYTES, 0, 0, &sc->sc_rxhsoft[i].ds_dmamap)) != 0) {
printf("%s: unable to create rxh DMA map %d, "
"error = %d\n", device_xname(sc->sc_dev), i, error);
return;
}
sc->sc_rxhsoft[i].ds_mbuf = NULL;
}
for (i = 0; i < ADMSW_NRXLDESC; i++) {
if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
MCLBYTES, 0, 0, &sc->sc_rxlsoft[i].ds_dmamap)) != 0) {
printf("%s: unable to create rxl DMA map %d, "
"error = %d\n", device_xname(sc->sc_dev), i, error);
return;
}
sc->sc_rxlsoft[i].ds_mbuf = NULL;
}
admsw_init_bufs(sc);
admsw_reset(sc);
for (i = 0; i < SW_DEVS; i++) {
ifmedia_init(&sc->sc_ifmedia[i], 0, admsw_mediachange, admsw_mediastatus);
ifmedia_add(&sc->sc_ifmedia[i], IFM_ETHER|IFM_10_T, 0, NULL);
ifmedia_add(&sc->sc_ifmedia[i], IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
ifmedia_add(&sc->sc_ifmedia[i], IFM_ETHER|IFM_100_TX, 0, NULL);
ifmedia_add(&sc->sc_ifmedia[i], IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL);
ifmedia_add(&sc->sc_ifmedia[i], IFM_ETHER|IFM_AUTO, 0, NULL);
ifmedia_set(&sc->sc_ifmedia[i], IFM_ETHER|IFM_AUTO);
ifp = &sc->sc_ethercom[i].ec_if;
strcpy(ifp->if_xname, device_xname(sc->sc_dev));
ifp->if_xname[5] += i;
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = admsw_ioctl;
ifp->if_start = admsw_start;
ifp->if_watchdog = admsw_watchdog;
ifp->if_init = admsw_init;
ifp->if_stop = admsw_stop;
ifp->if_capabilities |= IFCAP_CSUM_IPv4_Tx | IFCAP_CSUM_IPv4_Rx;
IFQ_SET_MAXLEN(&ifp->if_snd, max(ADMSW_NTXLDESC, IFQ_MAXLEN));
IFQ_SET_READY(&ifp->if_snd);
/* Attach the interface. */
if_attach(ifp);
ether_ifattach(ifp, enaddr);
enaddr[5]++;
}
#ifdef ADMSW_EVENT_COUNTERS
evcnt_attach_dynamic(&sc->sc_ev_txstall, EVCNT_TYPE_MISC,
NULL, device_xname(sc->sc_dev), "txstall");
evcnt_attach_dynamic(&sc->sc_ev_rxstall, EVCNT_TYPE_MISC,
NULL, device_xname(sc->sc_dev), "rxstall");
evcnt_attach_dynamic(&sc->sc_ev_txintr, EVCNT_TYPE_MISC,
NULL, device_xname(sc->sc_dev), "txintr");
evcnt_attach_dynamic(&sc->sc_ev_rxintr, EVCNT_TYPE_MISC,
NULL, device_xname(sc->sc_dev), "rxintr");
#if 1
evcnt_attach_dynamic(&sc->sc_ev_rxsync, EVCNT_TYPE_MISC,
NULL, device_xname(sc->sc_dev), "rxsync");
#endif
#endif
admwdog_attach(sc);
/* Make sure the interface is shutdown during reboot. */
sc->sc_sdhook = shutdownhook_establish(admsw_shutdown, sc);
if (sc->sc_sdhook == NULL)
printf("%s: WARNING: unable to establish shutdown hook\n",
device_xname(sc->sc_dev));
/* leave interrupts and cpu port disabled */
return;
}
