void *pvPortMalloc( size_t xWantedSize )
{
BlockLink_t *pxBlock, *pxPreviousBlock, *pxNewBlockLink;
void *pvReturn = NULL;
vTaskSuspendAll();
{
/* If this is the first call to malloc then the heap will require
initialisation to setup the list of free blocks. */
if( pxEnd == NULL )
{
prvHeapInit();
}
else
{
mtCOVERAGE_TEST_MARKER();
}
/* Check the requested block size is not so large that the top bit is
set. The top bit of the block size member of the BlockLink_t structure
is used to determine who owns the block - the application or the
kernel, so it must be free. */
if( ( xWantedSize & xBlockAllocatedBit ) == 0 )
{
/* The wanted size is increased so it can contain a BlockLink_t
structure in addition to the requested amount of bytes. */
if( xWantedSize > 0 )
{
xWantedSize += xHeapStructSize;
/* Ensure that blocks are always aligned to the required number
of bytes. */
if( ( xWantedSize & portBYTE_ALIGNMENT_MASK ) != 0x00 )
{
/* Byte alignment required. */
xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );
configASSERT( ( xWantedSize & portBYTE_ALIGNMENT_MASK ) == 0 );
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
else
{
mtCOVERAGE_TEST_MARKER();
}
if( ( xWantedSize > 0 ) && ( xWantedSize <= xFreeBytesRemaining ) )
{
/* Traverse the list from the start (lowest address) block until
one of adequate size is found. */
pxPreviousBlock = &xStart;
pxBlock = xStart.pxNextFreeBlock;
while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock != NULL ) )
{
pxPreviousBlock = pxBlock;
pxBlock = pxBlock->pxNextFreeBlock;
}
/* If the end marker was reached then a block of adequate size
was not found. */
if( pxBlock != pxEnd )
{
/* Return the memory space pointed to - jumping over the
BlockLink_t structure at its start. */
pvReturn = ( void * ) ( ( ( uint8_t * ) pxPreviousBlock->pxNextFreeBlock ) + xHeapStructSize );
/* This block is being returned for use so must be taken out
of the list of free blocks. */
pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
/* If the block is larger than required it can be split into
two. */
if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )
{
/* This block is to be split into two. Create a new
block following the number of bytes requested. The void
cast is used to prevent byte alignment warnings from the
compiler. */
pxNewBlockLink = ( void * ) ( ( ( uint8_t * ) pxBlock ) + xWantedSize );
configASSERT( ( ( ( size_t ) pxNewBlockLink ) & portBYTE_ALIGNMENT_MASK ) == 0 );
/* Calculate the sizes of two blocks split from the
single block. */
pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;
pxBlock->xBlockSize = xWantedSize;
/* Insert the new block into the list of free blocks. */
prvInsertBlockIntoFreeList( pxNewBlockLink );
}
else
{
mtCOVERAGE_TEST_MARKER();
}
xFreeBytesRemaining -= pxBlock->xBlockSize;
if( xFreeBytesRemaining < xMinimumEverFreeBytesRemaining )
{
xMinimumEverFreeBytesRemaining = xFreeBytesRemaining;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
/* The block is being returned - it is allocated and owned
by the application and has no "next" block. */
pxBlock->xBlockSize |= xBlockAllocatedBit;
pxBlock->pxNextFreeBlock = NULL;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
else
{
mtCOVERAGE_TEST_MARKER();
}
traceMALLOC( pvReturn, xWantedSize );
}
( void ) xTaskResumeAll();
#if( configUSE_MALLOC_FAILED_HOOK == 1 )
{
if( pvReturn == NULL )
{
extern void vApplicationMallocFailedHook( void );
vApplicationMallocFailedHook();
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
#endif
configASSERT( ( ( ( size_t ) pvReturn ) & ( size_t ) portBYTE_ALIGNMENT_MASK ) == 0 );
return pvReturn;
}
void *pvPortMalloc( size_t xWantedSize )
{
BlockLink_t *pxBlock, *pxPreviousBlock, *pxNewBlockLink;
static BaseType_t xHeapHasBeenInitialised = pdFALSE;
void *pvReturn = NULL;
vTaskSuspendAll();
{
/* If this is the first call to malloc then the heap will require
initialisation to setup the list of free blocks. */
if( xHeapHasBeenInitialised == pdFALSE )
{
prvHeapInit();
xHeapHasBeenInitialised = pdTRUE;
}
/* The wanted size is increased so it can contain a BlockLink_t
structure in addition to the requested amount of bytes. */
if( xWantedSize > 0 )
{
xWantedSize += heapSTRUCT_SIZE;
/* Ensure that blocks are always aligned to the required number of bytes. */
if( ( xWantedSize & portBYTE_ALIGNMENT_MASK ) != 0 )
{
/* Byte alignment required. */
xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );
}
}
if( ( xWantedSize > 0 ) && ( xWantedSize < configADJUSTED_HEAP_SIZE ) )
{
/* Blocks are stored in byte order - traverse the list from the start
(smallest) block until one of adequate size is found. */
pxPreviousBlock = &xStart;
pxBlock = xStart.pxNextFreeBlock;
while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock != NULL ) )
{
pxPreviousBlock = pxBlock;
pxBlock = pxBlock->pxNextFreeBlock;
}
/* If we found the end marker then a block of adequate size was not found. */
if( pxBlock != &xEnd )
{
/* Return the memory space - jumping over the BlockLink_t structure
at its start. */
pvReturn = ( void * ) ( ( ( uint8_t * ) pxPreviousBlock->pxNextFreeBlock ) + heapSTRUCT_SIZE );
/* This block is being returned for use so must be taken out of the
list of free blocks. */
pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
/* If the block is larger than required it can be split into two. */
if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )
{
/* This block is to be split into two. Create a new block
following the number of bytes requested. The void cast is
used to prevent byte alignment warnings from the compiler. */
pxNewBlockLink = ( void * ) ( ( ( uint8_t * ) pxBlock ) + xWantedSize );
/* Calculate the sizes of two blocks split from the single
block. */
pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;
pxBlock->xBlockSize = xWantedSize;
/* Insert the new block into the list of free blocks. */
prvInsertBlockIntoFreeList( ( pxNewBlockLink ) );
}
xFreeBytesRemaining -= pxBlock->xBlockSize;
}
}
traceMALLOC( pvReturn, xWantedSize );
}
( void ) xTaskResumeAll();
#if( configUSE_MALLOC_FAILED_HOOK == 1 )
{
if( pvReturn == NULL )
{
extern void vApplicationMallocFailedHook( void );
vApplicationMallocFailedHook();
}
}
#endif
return pvReturn;
}
void *pvPortMalloc( size_t xWantedSize )
{
xBlockLink *pxBlock = NULL, *pxPreviousBlock, *pxNewBlockLink;
void *pvReturn = NULL;
if(!xWantedSize)
return NULL;
pre_alloc_hook( xWantedSize );
vTaskSuspendAll();
{
/* If this is the first call to malloc then the heap will require
initialisation to setup the list of free blocks. */
if( xHeapHasBeenInitialised == pdFALSE )
{
prvHeapInit();
xHeapHasBeenInitialised = pdTRUE;
}
/* The wanted size is increased so it can contain a xBlockLink
structure in addition to the requested amount of bytes. */
if( xWantedSize > 0 )
{
xWantedSize += heapSTRUCT_SIZE;
/* Ensure that blocks are always aligned to the required number of bytes. */
if( xWantedSize & portBYTE_ALIGNMENT_MASK )
{
/* Byte alignment required. */
xWantedSize += ( portBYTE_ALIGNMENT -
( xWantedSize & portBYTE_ALIGNMENT_MASK ) );
}
}
if( ( xWantedSize > 0 ) && ( xWantedSize < configTOTAL_HEAP_SIZE ) )
{
/* Blocks are stored in byte order - traverse the list from the start
(smallest) block until one of adequate size is found. */
pxPreviousBlock = &xStart;
pxBlock = xStart.pxNextFreeBlock;
while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock ) )
{
pxPreviousBlock = pxBlock;
pxBlock = pxBlock->pxNextFreeBlock;
}
/* If we found the end marker then a block of adequate size was not found. */
if( pxBlock != &xEnd )
{
/* Return the memory space - jumping over the xBlockLink structure
at its start. */
pvReturn = ( void * ) ( ( ( unsigned char * ) pxPreviousBlock->pxNextFreeBlock )
+ heapSTRUCT_SIZE );
#ifdef FREERTOS_ENABLE_MALLOC_STATS
hI.totalAllocations++;
#endif // FREERTOS_ENABLE_MALLOC_STATS
/* This block is being returned for use so must be taken off the
list of free blocks. */
pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
pxBlock->pxNextFreeBlock = NULL;
/* If the block is larger than required it can be split into two. */
if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )
{
/* This block is to be split into two. Create a new block
following the number of bytes requested. The void cast is
used to prevent byte alignment warnings from the compiler. */
pxNewBlockLink = ( void * ) ( ( ( unsigned char * ) pxBlock ) + xWantedSize );
/* Calculate the sizes of two blocks split from the single
block. */
pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;
/* Assume bit 0 is 0 i.e. BLOCK_ALLOCATED flag is clear */
pxBlock->xBlockSize = xWantedSize;
/* Add the new block to the serial list */
pxNewBlockLink->pxPrev = pxBlock;
if( ! IS_LAST_BLOCK(pxNewBlockLink) )
NEXT_BLOCK( pxNewBlockLink )->pxPrev =
pxNewBlockLink;
SET_ALLOCATED(pxBlock);
/* insert the new block into the list of free blocks. */
prvInsertBlockIntoFreeList( pxNewBlockLink );
}
else {
SET_ALLOCATED(pxBlock);
}
xFreeBytesRemaining -= BLOCK_SIZE(pxBlock);
}
}
}
xTaskResumeAll();
#if( configUSE_MALLOC_FAILED_HOOK == 1 )
{
if( pvReturn == NULL )
{
DTRACE("Heap allocation failed.\n\r"
"Requested: %d\n\r"
"Available : %d\n\r", xWantedSize, xFreeBytesRemaining);
extern void vApplicationMallocFailedHook( void );
vApplicationMallocFailedHook();
}
}
#else
if( pvReturn == NULL ) {
DTRACE("Heap allocation failed.\n\r"
"Requested: %d\n\r"
"Available : %d\n\r", xWantedSize, xFreeBytesRemaining);
#ifdef FREERTOS_ENABLE_MALLOC_STATS
hI.failedAllocations++;
#endif /* FREERTOS_ENABLE_MALLOC_STATS */
}
#endif
if(pvReturn) {
SET_ACTUAL_SIZE( pxBlock );
SET_CALLER_ADDR( pxBlock );
ATRACE("MDC A %10x %6d %10d R: %x\r\n", pvReturn ,
BLOCK_SIZE( pxBlock ),
xFreeBytesRemaining, __builtin_return_address(0));
randomizeAreaData((unsigned char*)pvReturn,
BLOCK_SIZE( pxBlock ) - heapSTRUCT_SIZE);
post_alloc_hook( pvReturn );
#ifdef FREERTOS_ENABLE_MALLOC_STATS
if ((configTOTAL_HEAP_SIZE - xFreeBytesRemaining) > hI.peakHeapUsage) {
hI.peakHeapUsage =
(configTOTAL_HEAP_SIZE - xFreeBytesRemaining);
}
#endif
}
return pvReturn;
}
int prvHeapAddMemBank(char *chunk_start, size_t size)
{
xBlockLink *pxIterator;
xBlockLink *pxNewBlock;
xBlockLink *pxAllocBlock;
xBlockLink *p;
/* Ensure that blocks are always aligned to the required number of bytes. */
DTRACE("AddMemBank: Received size: %u\r\n", size);
/* Make sure chunk_start is on portBYTE_ALIGNMENT */
if( (unsigned long) chunk_start & portBYTE_ALIGNMENT_MASK )
{
chunk_start += ( portBYTE_ALIGNMENT -
( (unsigned long) chunk_start & portBYTE_ALIGNMENT_MASK ) );
size -= ( portBYTE_ALIGNMENT -
( (unsigned long) chunk_start & portBYTE_ALIGNMENT_MASK ) );
}
if( size & portBYTE_ALIGNMENT_MASK )
{
/* Let go of the last few bytes */
size -= ( size & portBYTE_ALIGNMENT_MASK ) ;
}
DTRACE("AddMemBank: Fixed size: %u\r\n", size);
vTaskSuspendAll();
/* Initialize heap if not already */
if( xHeapHasBeenInitialised == pdFALSE ) {
prvHeapInit();
xHeapHasBeenInitialised = pdTRUE;
}
for( pxIterator = ( xBlockLink * )xHeap.ucHeap;
NEXT_BLOCK(pxIterator) != (void *)lastHeapAddress;
pxIterator = NEXT_BLOCK(pxIterator) ) { }
if (!IS_FREE_BLOCK(pxIterator)) {
/* For adding a new chunk it is important that the last part of the
* previous chunk is empty (ie end of SRAM0 should be available)
*/
DTRACE("End of the first bank is not free. Cannot add new memory bank");
return pdFAIL;
}
if ((chunk_start - (char *)lastHeapAddress) < heapMINIMUM_BLOCK_SIZE) {
/* Too small hole in between */
DTRACE("Too Small Hole in between %p %p %d\r\n", chunk_start, lastHeapAddress, heapMINIMUM_BLOCK_SIZE);
return pdFAIL;
}
if (chunk_start < (char *)startHeapAddress) {
DTRACE("Adding of a memory bank BEFORE the default heap is not supported");
return pdFAIL;
}
/* pxIterator should now point to the free block that contains the end
* of the previous chunk.
* We have to split this now, such that end of the previous chunk
* contains the heapSTRUCT. This heapSTRUCT should say that the entire
* hole from end of SRAM0 to start of the free space in SRAM1 is a huge
* allocation.
*/
/* Fix the size of the last free block */
/* XXX Check if we are creating a block lesser than the minimum allowed
* block size */
DTRACE("AddMemBank: Last Block: %p size %u\r\n", pxIterator, pxIterator->xBlockSize);
pxIterator->xBlockSize -= heapSTRUCT_SIZE;
unsigned unalignment = (pxIterator->xBlockSize & portBYTE_ALIGNMENT_MASK);
if (unalignment) {
pxIterator->xBlockSize -= unalignment;
}
DTRACE("AddMemBank: Fixed Last Block size %u\r\n", pxIterator->xBlockSize);
/* Create a new block that marks the hole as allocated */
pxAllocBlock = NEXT_BLOCK(pxIterator);
DTRACE("AddMemBank: Alloc Block: %p \r\n", pxAllocBlock);
pxAllocBlock->xBlockSize = chunk_start - (char *)lastHeapAddress +
heapSTRUCT_SIZE +
unalignment;
DTRACE("AddMemBank: Alloc Block: %p size %u\r\n", pxAllocBlock, pxAllocBlock->xBlockSize);
/* These are never used for an allocated block*/
pxAllocBlock->pxNextFreeBlock = NULL;
pxAllocBlock->pxPrev = pxIterator;
SET_ALLOCATED(pxAllocBlock);
/* Manage all accounting variables */
lastHeapAddress = (size_t)(chunk_start + size);
xFreeBytesRemaining += size;
configTOTAL_HEAP_SIZE += size;
#ifdef FREERTOS_ENABLE_MALLOC_STATS
hI.heapSize += size;
#endif // FREERTOS_ENABLE_MALLOC_STATS
xEnd.xBlockSize = configTOTAL_HEAP_SIZE;
/* Create a new block at the start of the chunk_start */
/* Ensure the allocation flags aren't part of the block size */
pxNewBlock = NEXT_BLOCK(pxAllocBlock);
DTRACE("AddMemBank: New Block: %p \r\n", pxNewBlock);
pxNewBlock->xBlockSize = size;
pxNewBlock->pxNextFreeBlock = &xEnd;
pxNewBlock->pxPrev = pxAllocBlock;
/* Iterate through the list until a block is found that has a larger size */
/* than the block we are inserting. */
for( p = &xStart; (p->pxNextFreeBlock != &xEnd) && (p->pxNextFreeBlock->xBlockSize < size);
p = p->pxNextFreeBlock )
{
/* There is nothing to do here - just iterate to the correct position. */
}
if (p->pxNextFreeBlock == &xEnd) {
/* Ours is the largest block */
p->pxNextFreeBlock = pxNewBlock;
} else {
/* Update the list to include the block being inserted in the correct */
/* position. */
pxNewBlock->pxNextFreeBlock = p->pxNextFreeBlock;
p->pxNextFreeBlock = pxNewBlock;
}
DTRACE("AddMemBank: New Block: %p size %u\r\n", pxNewBlock, pxNewBlock->xBlockSize);
xTaskResumeAll();
return pdPASS;
}
void *mem_4_malloc(size_t xWantedSize)
{
xBlockLink *pxBlock, *pxPreviousBlock, *pxNewBlockLink;
void *pvReturn = NULL;
raw_disable_sche();
{
/* If this is the first call to malloc then the heap will require
initialisation to setup the list of free blocks. */
if( pxEnd == NULL )
{
prvHeapInit();
}
/* Check the requested block size is not so large that the top bit is
set. The top bit of the block size member of the xBlockLink structure
is used to determine who owns the block - the application or the
kernel, so it must be free. */
if( ( xWantedSize & xBlockAllocatedBit ) == 0 )
{
/* The wanted size is increased so it can contain a xBlockLink
structure in addition to the requested amount of bytes. */
if( xWantedSize > 0 )
{
xWantedSize += heapSTRUCT_SIZE;
/* Ensure that blocks are always aligned to the required number
of bytes. */
if( ( xWantedSize & portBYTE_ALIGNMENT_MASK ) != 0x00 )
{
/* Byte alignment required. */
xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );
}
}
if( ( xWantedSize > 0 ) && ( xWantedSize <= xFreeBytesRemaining ) )
{
/* Traverse the list from the start (lowest address) block until
one of adequate size is found. */
pxPreviousBlock = &xStart;
pxBlock = xStart.pxNextFreeBlock;
while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock != NULL ) )
{
pxPreviousBlock = pxBlock;
pxBlock = pxBlock->pxNextFreeBlock;
}
/* If the end marker was reached then a block of adequate size
was not found. */
if( pxBlock != pxEnd )
{
/* Return the memory space pointed to - jumping over the
xBlockLink structure at its start. */
pvReturn = ( void * ) ( ( ( unsigned char * ) pxPreviousBlock->pxNextFreeBlock ) + heapSTRUCT_SIZE );
/* This block is being returned for use so must be taken out
of the list of free blocks. */
pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
/* If the block is larger than required it can be split into
two. */
if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )
{
/* This block is to be split into two. Create a new
block following the number of bytes requested. The void
cast is used to prevent byte alignment warnings from the
compiler. */
pxNewBlockLink = ( void * ) ( ( ( unsigned char * ) pxBlock ) + xWantedSize );
/* Calculate the sizes of two blocks split from the
single block. */
pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;
pxBlock->xBlockSize = xWantedSize;
/* Insert the new block into the list of free blocks. */
prvInsertBlockIntoFreeList( ( pxNewBlockLink ) );
}
xFreeBytesRemaining -= pxBlock->xBlockSize;
/* The block is being returned - it is allocated and owned
by the application and has no "next" block. */
pxBlock->xBlockSize |= xBlockAllocatedBit;
pxBlock->pxNextFreeBlock = NULL;
}
}
}
}
raw_enable_sche();
return pvReturn;
}
void *pvPortMalloc( size_t xWantedSize )
{
xBlockLink *pxBlock, *pxPreviousBlock, *pxNewBlockLink;
void *pvReturn = NULL;
// printf("%s %d %d\n", __func__, xWantedSize, xFreeBytesRemaining);
// vTaskSuspendAll();
ETS_INTR_LOCK();
{
/* If this is the first call to malloc then the heap will require
initialisation to setup the list of free blocks. */
if( pxEnd == NULL )
{
prvHeapInit();
}
/* Check the requested block size is not so large that the top bit is
set. The top bit of the block size member of the xBlockLink structure
is used to determine who owns the block - the application or the
kernel, so it must be free. */
if( ( xWantedSize & xBlockAllocatedBit ) == 0 )
{
/* The wanted size is increased so it can contain a xBlockLink
structure in addition to the requested amount of bytes. */
if( xWantedSize > 0 )
{
xWantedSize = xPortWantedSizeAlign(xWantedSize);
}
if( ( xWantedSize > 0 ) && ( xWantedSize <= xFreeBytesRemaining ) )
{
/* Traverse the list from the start (lowest address) block until
one of adequate size is found. */
pxPreviousBlock = &xStart;
pxBlock = xStart.pxNextFreeBlock;
while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock != NULL ) )
{
pxPreviousBlock = pxBlock;
pxBlock = pxBlock->pxNextFreeBlock;
}
/* If the end marker was reached then a block of adequate size
was not found. */
if( pxBlock != pxEnd )
{
/* Return the memory space pointed to - jumping over the
xBlockLink structure at its start. */
pvReturn = ( void * ) ( ( ( unsigned char * ) pxPreviousBlock->pxNextFreeBlock ) + heapSTRUCT_SIZE );
/* This block is being returned for use so must be taken out
of the list of free blocks. */
pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
/* If the block is larger than required it can be split into
two. */
if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )
{
/* This block is to be split into two. Create a new
block following the number of bytes requested. The void
cast is used to prevent byte alignment warnings from the
compiler. */
pxNewBlockLink = ( void * ) ( ( ( unsigned char * ) pxBlock ) + xWantedSize );
/* Calculate the sizes of two blocks split from the
single block. */
pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;
pxBlock->xBlockSize = xWantedSize;
/* Insert the new block into the list of free blocks. */
prvInsertBlockIntoFreeList( ( pxNewBlockLink ) );
}
xFreeBytesRemaining -= pxBlock->xBlockSize;
/* The block is being returned - it is allocated and owned
by the application and has no "next" block. */
pxBlock->xBlockSize |= xBlockAllocatedBit;
pxBlock->pxNextFreeBlock = NULL;
}
}
}
}
// xTaskResumeAll();
ETS_INTR_UNLOCK();
#if( configUSE_MALLOC_FAILED_HOOK == 1 )
{
if( pvReturn == NULL )
{
extern void vApplicationMallocFailedHook( void );
vApplicationMallocFailedHook();
}
}
#endif
// printf("%s %x %x\n", __func__, pvReturn, pxBlock);
return pvReturn;
}
void *pvPortMalloc( size_t xWantedSize )
{
xBlockLink *pxBlock, *pxPreviousBlock, *pxNewBlockLink;
void *pvReturn = NULL;
taskENTER_CRITICAL( &xMemLock );
{
/* If this is the first call to malloc then the heap will require
initialisation to setup the list of free blocks. */
if( pxEnd == NULL )
{
prvHeapInit();
}
/* The wanted size is increased so it can contain a xBlockLink
structure in addition to the requested amount of bytes. */
if( xWantedSize > 0 )
{
xWantedSize += heapSTRUCT_SIZE;
/* Ensure that blocks are always aligned to the required number of
bytes. */
if( xWantedSize & portBYTE_ALIGNMENT_MASK )
{
/* Byte alignment required. */
xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );
}
}
if( ( xWantedSize > 0 ) && ( xWantedSize < xTotalHeapSize ) )
{
/* Traverse the list from the start (lowest address) block until one
of adequate size is found. */
pxPreviousBlock = &xStart;
pxBlock = xStart.pxNextFreeBlock;
while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock != NULL ) )
{
pxPreviousBlock = pxBlock;
pxBlock = pxBlock->pxNextFreeBlock;
}
/* If the end marker was reached then a block of adequate size was
not found. */
if( pxBlock != pxEnd )
{
/* Return the memory space - jumping over the xBlockLink structure
at its start. */
pvReturn = ( void * ) ( ( ( unsigned char * ) pxPreviousBlock->pxNextFreeBlock ) + heapSTRUCT_SIZE );
/* This block is being returned for use so must be taken out of
the list of free blocks. */
pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
/* If the block is larger than required it can be split into two. */
if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )
{
/* This block is to be split into two. Create a new block
following the number of bytes requested. The void cast is
used to prevent byte alignment warnings from the compiler. */
pxNewBlockLink = ( void * ) ( ( ( unsigned char * ) pxBlock ) + xWantedSize );
/* Calculate the sizes of two blocks split from the single
block. */
pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;
pxBlock->xBlockSize = xWantedSize;
/* Insert the new block into the list of free blocks. */
prvInsertBlockIntoFreeList( ( pxNewBlockLink ) );
}
xFreeBytesRemaining -= pxBlock->xBlockSize;
}
}
}
taskEXIT_CRITICAL( &xMemLock );
#if( configUSE_MALLOC_FAILED_HOOK == 1 )
{
if( pvReturn == NULL )
{
extern void vApplicationMallocFailedHook( void );
vApplicationMallocFailedHook();
}
}
#endif
return pvReturn;
}
