static int pvscsi_host_reset(struct scsi_cmnd *cmd)
{
struct Scsi_Host *host = cmd->device->host;
struct pvscsi_adapter *adapter = shost_priv(host);
unsigned long flags;
bool use_msg;
scmd_printk(KERN_INFO, cmd, "SCSI Host reset\n");
spin_lock_irqsave(&adapter->hw_lock, flags);
use_msg = adapter->use_msg;
if (use_msg) {
adapter->use_msg = 0;
spin_unlock_irqrestore(&adapter->hw_lock, flags);
/*
* Now that we know that the ISR won't add more work on the
* workqueue we can safely flush any outstanding work.
*/
flush_workqueue(adapter->workqueue);
spin_lock_irqsave(&adapter->hw_lock, flags);
}
/*
* We're going to tear down the entire ring structure and set it back
* up, so stalling new requests until all completions are flushed and
* the rings are back in place.
*/
pvscsi_process_request_ring(adapter);
ll_adapter_reset(adapter);
/*
* Now process any completions. Note we do this AFTER adapter reset,
* which is strange, but stops races where completions get posted
* between processing the ring and issuing the reset. The backend will
* not touch the ring memory after reset, so the immediately pre-reset
* completion ring state is still valid.
*/
pvscsi_process_completion_ring(adapter);
pvscsi_reset_all(adapter);
adapter->use_msg = use_msg;
pvscsi_setup_all_rings(adapter);
pvscsi_unmask_intr(adapter);
spin_unlock_irqrestore(&adapter->hw_lock, flags);
return SUCCESS;
}
static int __devinit pvscsi_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct pvscsi_adapter *adapter;
struct Scsi_Host *host;
unsigned int i;
unsigned long flags = 0;
int error;
error = -ENODEV;
if (pci_enable_device(pdev))
return error;
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0 &&
pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) {
printk(KERN_INFO "vmw_pvscsi: using 64bit dma\n");
} else if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) == 0 &&
pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) == 0) {
printk(KERN_INFO "vmw_pvscsi: using 32bit dma\n");
} else {
printk(KERN_ERR "vmw_pvscsi: failed to set DMA mask\n");
goto out_disable_device;
}
pvscsi_template.can_queue =
min(PVSCSI_MAX_NUM_PAGES_REQ_RING, pvscsi_ring_pages) *
PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE;
pvscsi_template.cmd_per_lun =
min(pvscsi_template.can_queue, pvscsi_cmd_per_lun);
host = scsi_host_alloc(&pvscsi_template, sizeof(struct pvscsi_adapter));
if (!host) {
printk(KERN_ERR "vmw_pvscsi: failed to allocate host\n");
goto out_disable_device;
}
adapter = shost_priv(host);
memset(adapter, 0, sizeof(*adapter));
adapter->dev = pdev;
adapter->host = host;
spin_lock_init(&adapter->hw_lock);
host->max_channel = 0;
host->max_id = 16;
host->max_lun = 1;
host->max_cmd_len = 16;
adapter->rev = pdev->revision;
if (pci_request_regions(pdev, "vmw_pvscsi")) {
printk(KERN_ERR "vmw_pvscsi: pci memory selection failed\n");
goto out_free_host;
}
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
if ((pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO))
continue;
if (pci_resource_len(pdev, i) < PVSCSI_MEM_SPACE_SIZE)
continue;
break;
}
if (i == DEVICE_COUNT_RESOURCE) {
printk(KERN_ERR
"vmw_pvscsi: adapter has no suitable MMIO region\n");
goto out_release_resources;
}
adapter->mmioBase = pci_iomap(pdev, i, PVSCSI_MEM_SPACE_SIZE);
if (!adapter->mmioBase) {
printk(KERN_ERR
"vmw_pvscsi: can't iomap for BAR %d memsize %lu\n",
i, PVSCSI_MEM_SPACE_SIZE);
goto out_release_resources;
}
pci_set_master(pdev);
pci_set_drvdata(pdev, host);
ll_adapter_reset(adapter);
adapter->use_msg = pvscsi_setup_msg_workqueue(adapter);
error = pvscsi_allocate_rings(adapter);
if (error) {
printk(KERN_ERR "vmw_pvscsi: unable to allocate ring memory\n");
goto out_release_resources;
}
/*
* From this point on we should reset the adapter if anything goes
* wrong.
*/
pvscsi_setup_all_rings(adapter);
adapter->cmd_map = kcalloc(adapter->req_depth,
sizeof(struct pvscsi_ctx), GFP_KERNEL);
if (!adapter->cmd_map) {
printk(KERN_ERR "vmw_pvscsi: failed to allocate memory.\n");
error = -ENOMEM;
goto out_reset_adapter;
}
INIT_LIST_HEAD(&adapter->cmd_pool);
for (i = 0; i < adapter->req_depth; i++) {
struct pvscsi_ctx *ctx = adapter->cmd_map + i;
list_add(&ctx->list, &adapter->cmd_pool);
}
error = pvscsi_allocate_sg(adapter);
if (error) {
printk(KERN_ERR "vmw_pvscsi: unable to allocate s/g table\n");
goto out_reset_adapter;
}
if (!pvscsi_disable_msix &&
pvscsi_setup_msix(adapter, &adapter->irq) == 0) {
printk(KERN_INFO "vmw_pvscsi: using MSI-X\n");
adapter->use_msix = 1;
} else if (!pvscsi_disable_msi && pci_enable_msi(pdev) == 0) {
printk(KERN_INFO "vmw_pvscsi: using MSI\n");
adapter->use_msi = 1;
adapter->irq = pdev->irq;
} else {
printk(KERN_INFO "vmw_pvscsi: using INTx\n");
adapter->irq = pdev->irq;
flags = IRQF_SHARED;
}
error = request_irq(adapter->irq, pvscsi_isr, flags,
"vmw_pvscsi", adapter);
if (error) {
printk(KERN_ERR
"vmw_pvscsi: unable to request IRQ: %d\n", error);
adapter->irq = 0;
goto out_reset_adapter;
}
error = scsi_add_host(host, &pdev->dev);
if (error) {
printk(KERN_ERR
"vmw_pvscsi: scsi_add_host failed: %d\n", error);
goto out_reset_adapter;
}
dev_info(&pdev->dev, "VMware PVSCSI rev %d host #%u\n",
adapter->rev, host->host_no);
pvscsi_unmask_intr(adapter);
scsi_scan_host(host);
return 0;
out_reset_adapter:
ll_adapter_reset(adapter);
out_release_resources:
pvscsi_release_resources(adapter);
out_free_host:
scsi_host_put(host);
out_disable_device:
pci_set_drvdata(pdev, NULL);
pci_disable_device(pdev);
return error;
}
static int pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct pvscsi_adapter *adapter;
struct pvscsi_adapter adapter_temp;
struct Scsi_Host *host = NULL;
unsigned int i;
unsigned long flags = 0;
int error;
u32 max_id;
error = -ENODEV;
if (pci_enable_device(pdev))
return error;
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0 &&
pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) {
printk(KERN_INFO "vmw_pvscsi: using 64bit dma\n");
} else if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) == 0 &&
pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) == 0) {
printk(KERN_INFO "vmw_pvscsi: using 32bit dma\n");
} else {
printk(KERN_ERR "vmw_pvscsi: failed to set DMA mask\n");
goto out_disable_device;
}
/*
* Let's use a temp pvscsi_adapter struct until we find the number of
* targets on the adapter, after that we will switch to the real
* allocated struct.
*/
adapter = &adapter_temp;
memset(adapter, 0, sizeof(*adapter));
adapter->dev = pdev;
adapter->rev = pdev->revision;
if (pci_request_regions(pdev, "vmw_pvscsi")) {
printk(KERN_ERR "vmw_pvscsi: pci memory selection failed\n");
goto out_disable_device;
}
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
if ((pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO))
continue;
if (pci_resource_len(pdev, i) < PVSCSI_MEM_SPACE_SIZE)
continue;
break;
}
if (i == DEVICE_COUNT_RESOURCE) {
printk(KERN_ERR
"vmw_pvscsi: adapter has no suitable MMIO region\n");
goto out_release_resources_and_disable;
}
adapter->mmioBase = pci_iomap(pdev, i, PVSCSI_MEM_SPACE_SIZE);
if (!adapter->mmioBase) {
printk(KERN_ERR
"vmw_pvscsi: can't iomap for BAR %d memsize %lu\n",
i, PVSCSI_MEM_SPACE_SIZE);
goto out_release_resources_and_disable;
}
pci_set_master(pdev);
/*
* Ask the device for max number of targets before deciding the
* default pvscsi_ring_pages value.
*/
max_id = pvscsi_get_max_targets(adapter);
printk(KERN_INFO "vmw_pvscsi: max_id: %u\n", max_id);
if (pvscsi_ring_pages == 0)
/*
* Set the right default value. Up to 16 it is 8, above it is
* max.
*/
pvscsi_ring_pages = (max_id > 16) ?
PVSCSI_SETUP_RINGS_MAX_NUM_PAGES :
PVSCSI_DEFAULT_NUM_PAGES_PER_RING;
printk(KERN_INFO
"vmw_pvscsi: setting ring_pages to %d\n",
pvscsi_ring_pages);
pvscsi_template.can_queue =
min(PVSCSI_MAX_NUM_PAGES_REQ_RING, pvscsi_ring_pages) *
PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE;
pvscsi_template.cmd_per_lun =
min(pvscsi_template.can_queue, pvscsi_cmd_per_lun);
host = scsi_host_alloc(&pvscsi_template, sizeof(struct pvscsi_adapter));
if (!host) {
printk(KERN_ERR "vmw_pvscsi: failed to allocate host\n");
goto out_release_resources_and_disable;
}
/*
* Let's use the real pvscsi_adapter struct here onwards.
*/
adapter = shost_priv(host);
memset(adapter, 0, sizeof(*adapter));
adapter->dev = pdev;
adapter->host = host;
/*
* Copy back what we already have to the allocated adapter struct.
*/
adapter->rev = adapter_temp.rev;
adapter->mmioBase = adapter_temp.mmioBase;
spin_lock_init(&adapter->hw_lock);
host->max_channel = 0;
host->max_lun = 1;
host->max_cmd_len = 16;
host->max_id = max_id;
pci_set_drvdata(pdev, host);
ll_adapter_reset(adapter);
adapter->use_msg = pvscsi_setup_msg_workqueue(adapter);
error = pvscsi_allocate_rings(adapter);
if (error) {
printk(KERN_ERR "vmw_pvscsi: unable to allocate ring memory\n");
goto out_release_resources;
}
/*
* From this point on we should reset the adapter if anything goes
* wrong.
*/
pvscsi_setup_all_rings(adapter);
adapter->cmd_map = kcalloc(adapter->req_depth,
sizeof(struct pvscsi_ctx), GFP_KERNEL);
if (!adapter->cmd_map) {
printk(KERN_ERR "vmw_pvscsi: failed to allocate memory.\n");
error = -ENOMEM;
goto out_reset_adapter;
}
INIT_LIST_HEAD(&adapter->cmd_pool);
for (i = 0; i < adapter->req_depth; i++) {
struct pvscsi_ctx *ctx = adapter->cmd_map + i;
list_add(&ctx->list, &adapter->cmd_pool);
}
error = pvscsi_allocate_sg(adapter);
if (error) {
printk(KERN_ERR "vmw_pvscsi: unable to allocate s/g table\n");
goto out_reset_adapter;
}
if (!pvscsi_disable_msix &&
pvscsi_setup_msix(adapter, &adapter->irq) == 0) {
printk(KERN_INFO "vmw_pvscsi: using MSI-X\n");
adapter->use_msix = 1;
} else if (!pvscsi_disable_msi && pci_enable_msi(pdev) == 0) {
printk(KERN_INFO "vmw_pvscsi: using MSI\n");
adapter->use_msi = 1;
adapter->irq = pdev->irq;
} else {
printk(KERN_INFO "vmw_pvscsi: using INTx\n");
adapter->irq = pdev->irq;
flags = IRQF_SHARED;
}
adapter->use_req_threshold = pvscsi_setup_req_threshold(adapter, true);
printk(KERN_DEBUG "vmw_pvscsi: driver-based request coalescing %sabled\n",
adapter->use_req_threshold ? "en" : "dis");
error = request_irq(adapter->irq, pvscsi_isr, flags,
"vmw_pvscsi", adapter);
if (error) {
printk(KERN_ERR
"vmw_pvscsi: unable to request IRQ: %d\n", error);
adapter->irq = 0;
goto out_reset_adapter;
}
error = scsi_add_host(host, &pdev->dev);
if (error) {
printk(KERN_ERR
"vmw_pvscsi: scsi_add_host failed: %d\n", error);
goto out_reset_adapter;
}
dev_info(&pdev->dev, "VMware PVSCSI rev %d host #%u\n",
adapter->rev, host->host_no);
pvscsi_unmask_intr(adapter);
scsi_scan_host(host);
return 0;
out_reset_adapter:
ll_adapter_reset(adapter);
out_release_resources:
pvscsi_release_resources(adapter);
scsi_host_put(host);
out_disable_device:
pci_disable_device(pdev);
return error;
out_release_resources_and_disable:
pvscsi_release_resources(adapter);
goto out_disable_device;
}
