static void sp804_realize(DeviceState *dev, Error **errp)
{
SP804State *s = SP804(dev);
s->timer[0] = arm_timer_init(s->freq0);
s->timer[1] = arm_timer_init(s->freq1);
s->timer[0]->irq = qemu_allocate_irq(sp804_set_irq, s, 0);
s->timer[1]->irq = qemu_allocate_irq(sp804_set_irq, s, 1);
}
CBus *cbus_init(qemu_irq dat)
{
CBusPriv *s = (CBusPriv *) g_malloc0(sizeof(*s));
s->dat_out = dat;
s->cbus.clk = qemu_allocate_irq(cbus_clk, s, 0);
s->cbus.dat = qemu_allocate_irq(cbus_dat, s, 0);
s->cbus.sel = qemu_allocate_irq(cbus_sel, s, 0);
s->sel = 1;
s->clk = 0;
s->dat = 0;
return &s->cbus;
}
static void pxa2xx_pcmcia_initfn(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
PXA2xxPCMCIAState *s = PXA2XX_PCMCIA(obj);
memory_region_init(&s->container_mem, obj, "container", 0x10000000);
sysbus_init_mmio(sbd, &s->container_mem);
/* Socket I/O Memory Space */
memory_region_init_io(&s->iomem, NULL, &pxa2xx_pcmcia_io_ops, s,
"pxa2xx-pcmcia-io", 0x04000000);
memory_region_add_subregion(&s->container_mem, 0x00000000,
&s->iomem);
/* Then next 64 MB is reserved */
/* Socket Attribute Memory Space */
memory_region_init_io(&s->attr_iomem, NULL, &pxa2xx_pcmcia_attr_ops, s,
"pxa2xx-pcmcia-attribute", 0x04000000);
memory_region_add_subregion(&s->container_mem, 0x08000000,
&s->attr_iomem);
/* Socket Common Memory Space */
memory_region_init_io(&s->common_iomem, NULL, &pxa2xx_pcmcia_common_ops, s,
"pxa2xx-pcmcia-common", 0x04000000);
memory_region_add_subregion(&s->container_mem, 0x0c000000,
&s->common_iomem);
s->slot.irq = qemu_allocate_irq(pxa2xx_pcmcia_set_irq, s, 0);
object_property_add_link(obj, "card", TYPE_PCMCIA_CARD,
(Object **)&s->card,
NULL, /* read-only property */
0, NULL);
}
static void puv3_soc_init(CPUUniCore32State *env)
{
qemu_irq cpu_intc, irqs[PUV3_IRQS_NR];
DeviceState *dev;
MemoryRegion *i8042 = g_new(MemoryRegion, 1);
int i;
/* Initialize interrupt controller */
cpu_intc = qemu_allocate_irq(puv3_intc_cpu_handler,
uc32_env_get_cpu(env), 0);
dev = sysbus_create_simple("puv3_intc", PUV3_INTC_BASE, cpu_intc);
for (i = 0; i < PUV3_IRQS_NR; i++) {
irqs[i] = qdev_get_gpio_in(dev, i);
}
/* Initialize minimal necessary devices for kernel booting */
sysbus_create_simple("puv3_pm", PUV3_PM_BASE, NULL);
sysbus_create_simple("puv3_dma", PUV3_DMA_BASE, NULL);
sysbus_create_simple("puv3_ost", PUV3_OST_BASE, irqs[PUV3_IRQS_OST0]);
sysbus_create_varargs("puv3_gpio", PUV3_GPIO_BASE,
irqs[PUV3_IRQS_GPIOLOW0], irqs[PUV3_IRQS_GPIOLOW1],
irqs[PUV3_IRQS_GPIOLOW2], irqs[PUV3_IRQS_GPIOLOW3],
irqs[PUV3_IRQS_GPIOLOW4], irqs[PUV3_IRQS_GPIOLOW5],
irqs[PUV3_IRQS_GPIOLOW6], irqs[PUV3_IRQS_GPIOLOW7],
irqs[PUV3_IRQS_GPIOHIGH], NULL);
/* Keyboard (i8042), mouse disabled for nographic */
i8042_mm_init(irqs[PUV3_IRQS_PS2_KBD], NULL, i8042, PUV3_REGS_OFFSET, 4);
memory_region_add_subregion(get_system_memory(), PUV3_PS2_BASE, i8042);
}
static void via_ide_realize(PCIDevice *dev, Error **errp)
{
PCIIDEState *d = PCI_IDE(dev);
uint8_t *pci_conf = dev->config;
int i;
pci_config_set_prog_interface(pci_conf, 0x8f); /* native PCI ATA mode */
pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
dev->wmask[PCI_INTERRUPT_LINE] = 0xf;
qemu_register_reset(via_ide_reset, d);
memory_region_init_io(&d->data_bar[0], OBJECT(d), &pci_ide_data_le_ops,
&d->bus[0], "via-ide0-data", 8);
pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[0]);
memory_region_init_io(&d->cmd_bar[0], OBJECT(d), &pci_ide_cmd_le_ops,
&d->bus[0], "via-ide0-cmd", 4);
pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd_bar[0]);
memory_region_init_io(&d->data_bar[1], OBJECT(d), &pci_ide_data_le_ops,
&d->bus[1], "via-ide1-data", 8);
pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[1]);
memory_region_init_io(&d->cmd_bar[1], OBJECT(d), &pci_ide_cmd_le_ops,
&d->bus[1], "via-ide1-cmd", 4);
pci_register_bar(dev, 3, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd_bar[1]);
bmdma_setup_bar(d);
pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
vmstate_register(DEVICE(dev), 0, &vmstate_ide_pci, d);
for (i = 0; i < 2; i++) {
ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(d), i, 2);
ide_init2(&d->bus[i], qemu_allocate_irq(via_ide_set_irq, d, i));
bmdma_init(&d->bus[i], &d->bmdma[i], d);
d->bmdma[i].bus = &d->bus[i];
ide_register_restart_cb(&d->bus[i]);
}
}
TC6393xbState *tc6393xb_init(MemoryRegion *sysmem, uint32_t base, qemu_irq irq)
{
TC6393xbState *s;
DriveInfo *nand;
static const MemoryRegionOps tc6393xb_ops = {
.read = tc6393xb_readb,
.write = tc6393xb_writeb,
.endianness = DEVICE_NATIVE_ENDIAN,
.impl = {
.min_access_size = 1,
.max_access_size = 1,
},
};
s = (TC6393xbState *) g_malloc0(sizeof(TC6393xbState));
s->irq = irq;
s->gpio_in = qemu_allocate_irqs(tc6393xb_gpio_set, s, TC6393XB_GPIOS);
s->l3v = qemu_allocate_irq(tc6393xb_l3v, s, 0);
s->blanked = 1;
s->sub_irqs = qemu_allocate_irqs(tc6393xb_sub_irq, s, TC6393XB_NR_IRQS);
nand = drive_get(IF_MTD, 0, 0);
s->flash = nand_init(nand ? blk_by_legacy_dinfo(nand) : NULL,
NAND_MFR_TOSHIBA, 0x76);
memory_region_init_io(&s->iomem, NULL, &tc6393xb_ops, s, "tc6393xb", 0x10000);
memory_region_add_subregion(sysmem, base, &s->iomem);
memory_region_init_ram(&s->vram, NULL, "tc6393xb.vram", 0x100000,
&error_fatal);
vmstate_register_ram_global(&s->vram);
s->vram_ptr = memory_region_get_ram_ptr(&s->vram);
memory_region_add_subregion(sysmem, base + 0x100000, &s->vram);
s->scr_width = 480;
s->scr_height = 640;
s->con = graphic_console_init(NULL, 0, &tc6393xb_gfx_ops, s);
return s;
}
static void tosa_gpio_setup(PXA2xxState *cpu,
DeviceState *scp0,
DeviceState *scp1,
TC6393xbState *tmio)
{
qemu_irq *outsignals = qemu_allocate_irqs(tosa_out_switch, cpu, 4);
qemu_irq reset;
/* MMC/SD host */
pxa2xx_mmci_handlers(cpu->mmc,
qdev_get_gpio_in(scp0, TOSA_GPIO_SD_WP),
qemu_irq_invert(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_nSD_DETECT)));
/* Handle reset */
reset = qemu_allocate_irq(tosa_reset, cpu, 0);
qdev_connect_gpio_out(cpu->gpio, TOSA_GPIO_ON_RESET, reset);
/* PCMCIA signals: card's IRQ and Card-Detect */
pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_IRQ),
qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_CD));
pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_JC_CF_IRQ),
NULL);
qdev_connect_gpio_out(scp1, TOSA_GPIO_BT_LED, outsignals[0]);
qdev_connect_gpio_out(scp1, TOSA_GPIO_NOTE_LED, outsignals[1]);
qdev_connect_gpio_out(scp1, TOSA_GPIO_CHRG_ERR_LED, outsignals[2]);
qdev_connect_gpio_out(scp1, TOSA_GPIO_WLAN_LED, outsignals[3]);
qdev_connect_gpio_out(scp1, TOSA_GPIO_TC6393XB_L3V_ON, tc6393xb_l3v_get(tmio));
/* UDC Vbus */
qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_USB_IN));
}
/* PC hardware initialisation */
static void pc_init1(MachineState *machine,
const char *host_type, const char *pci_type)
{
PCMachineState *pcms = PC_MACHINE(machine);
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *system_io = get_system_io();
int i;
PCIBus *pci_bus;
ISABus *isa_bus;
PCII440FXState *i440fx_state;
int piix3_devfn = -1;
qemu_irq *gsi;
qemu_irq *i8259;
qemu_irq smi_irq;
GSIState *gsi_state;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
BusState *idebus[MAX_IDE_BUS];
ISADevice *rtc_state;
MemoryRegion *ram_memory;
MemoryRegion *pci_memory;
MemoryRegion *rom_memory;
PcGuestInfo *guest_info;
ram_addr_t lowmem;
/* Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory).
* If it doesn't, we need to split it in chunks below and above 4G.
* In any case, try to make sure that guest addresses aligned at
* 1G boundaries get mapped to host addresses aligned at 1G boundaries.
* For old machine types, use whatever split we used historically to avoid
* breaking migration.
*/
if (machine->ram_size >= 0xe0000000) {
lowmem = gigabyte_align ? 0xc0000000 : 0xe0000000;
} else {
lowmem = 0xe0000000;
}
/* Handle the machine opt max-ram-below-4g. It is basically doing
* min(qemu limit, user limit).
*/
if (lowmem > pcms->max_ram_below_4g) {
lowmem = pcms->max_ram_below_4g;
if (machine->ram_size - lowmem > lowmem &&
lowmem & ((1ULL << 30) - 1)) {
error_report("Warning: Large machine and max_ram_below_4g(%"PRIu64
") not a multiple of 1G; possible bad performance.",
pcms->max_ram_below_4g);
}
}
if (machine->ram_size >= lowmem) {
pcms->above_4g_mem_size = machine->ram_size - lowmem;
pcms->below_4g_mem_size = lowmem;
} else {
pcms->above_4g_mem_size = 0;
pcms->below_4g_mem_size = machine->ram_size;
}
if (xen_enabled() && xen_hvm_init(pcms, &ram_memory) != 0) {
fprintf(stderr, "xen hardware virtual machine initialisation failed\n");
exit(1);
}
pc_cpus_init(pcms);
if (kvm_enabled() && kvmclock_enabled) {
kvmclock_create();
}
if (pci_enabled) {
pci_memory = g_new(MemoryRegion, 1);
memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
rom_memory = pci_memory;
} else {
pci_memory = NULL;
rom_memory = system_memory;
}
guest_info = pc_guest_info_init(pcms);
guest_info->has_acpi_build = has_acpi_build;
guest_info->legacy_acpi_table_size = legacy_acpi_table_size;
guest_info->isapc_ram_fw = !pci_enabled;
guest_info->has_reserved_memory = has_reserved_memory;
guest_info->rsdp_in_ram = rsdp_in_ram;
if (smbios_defaults) {
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* These values are guest ABI, do not change */
smbios_set_defaults("QEMU", "Standard PC (i440FX + PIIX, 1996)",
mc->name, smbios_legacy_mode, smbios_uuid_encoded,
SMBIOS_ENTRY_POINT_21);
}
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
pc_memory_init(pcms, system_memory,
rom_memory, &ram_memory, guest_info);
} else if (machine->kernel_filename != NULL) {
/* For xen HVM direct kernel boot, load linux here */
xen_load_linux(pcms, guest_info);
}
gsi_state = g_malloc0(sizeof(*gsi_state));
if (kvm_ioapic_in_kernel()) {
kvm_pc_setup_irq_routing(pci_enabled);
gsi = qemu_allocate_irqs(kvm_pc_gsi_handler, gsi_state,
GSI_NUM_PINS);
} else {
gsi = qemu_allocate_irqs(gsi_handler, gsi_state, GSI_NUM_PINS);
}
if (pci_enabled) {
pci_bus = i440fx_init(host_type,
pci_type,
&i440fx_state, &piix3_devfn, &isa_bus, gsi,
system_memory, system_io, machine->ram_size,
pcms->below_4g_mem_size,
pcms->above_4g_mem_size,
pci_memory, ram_memory);
} else {
pci_bus = NULL;
i440fx_state = NULL;
isa_bus = isa_bus_new(NULL, get_system_memory(), system_io);
no_hpet = 1;
}
isa_bus_irqs(isa_bus, gsi);
if (kvm_pic_in_kernel()) {
i8259 = kvm_i8259_init(isa_bus);
} else if (xen_enabled()) {
i8259 = xen_interrupt_controller_init();
} else {
i8259 = i8259_init(isa_bus, pc_allocate_cpu_irq());
}
for (i = 0; i < ISA_NUM_IRQS; i++) {
gsi_state->i8259_irq[i] = i8259[i];
}
g_free(i8259);
if (pci_enabled) {
ioapic_init_gsi(gsi_state, "i440fx");
}
pc_register_ferr_irq(gsi[13]);
pc_vga_init(isa_bus, pci_enabled ? pci_bus : NULL);
assert(pcms->vmport != ON_OFF_AUTO__MAX);
if (pcms->vmport == ON_OFF_AUTO_AUTO) {
pcms->vmport = xen_enabled() ? ON_OFF_AUTO_OFF : ON_OFF_AUTO_ON;
}
/* init basic PC hardware */
pc_basic_device_init(isa_bus, gsi, &rtc_state, true,
(pcms->vmport != ON_OFF_AUTO_ON), 0x4);
pc_nic_init(isa_bus, pci_bus);
ide_drive_get(hd, ARRAY_SIZE(hd));
if (pci_enabled) {
PCIDevice *dev;
if (xen_enabled()) {
dev = pci_piix3_xen_ide_init(pci_bus, hd, piix3_devfn + 1);
} else {
dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
}
idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
} else {
for(i = 0; i < MAX_IDE_BUS; i++) {
ISADevice *dev;
char busname[] = "ide.0";
dev = isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i],
ide_irq[i],
hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
/*
* The ide bus name is ide.0 for the first bus and ide.1 for the
* second one.
*/
busname[4] = '0' + i;
idebus[i] = qdev_get_child_bus(DEVICE(dev), busname);
}
}
pc_cmos_init(pcms, idebus[0], idebus[1], rtc_state);
if (pci_enabled && usb_enabled()) {
pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
}
if (pci_enabled && acpi_enabled) {
DeviceState *piix4_pm;
I2CBus *smbus;
smi_irq = qemu_allocate_irq(pc_acpi_smi_interrupt, first_cpu, 0);
/* TODO: Populate SPD eeprom data. */
smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
gsi[9], smi_irq,
pc_machine_is_smm_enabled(pcms),
&piix4_pm);
smbus_eeprom_init(smbus, 8, NULL, 0);
object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP,
TYPE_HOTPLUG_HANDLER,
(Object **)&pcms->acpi_dev,
object_property_allow_set_link,
OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort);
object_property_set_link(OBJECT(machine), OBJECT(piix4_pm),
PC_MACHINE_ACPI_DEVICE_PROP, &error_abort);
}
if (pci_enabled) {
pc_pci_device_init(pci_bus);
}
}
static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,
MachineState *machine)
{
const char *cpu_model = machine->cpu_model;
unsigned int i;
void *iommu, *espdma, *ledma, *nvram;
qemu_irq *cpu_irqs[MAX_CPUS], slavio_irq[32], slavio_cpu_irq[MAX_CPUS],
espdma_irq, ledma_irq;
qemu_irq esp_reset, dma_enable;
qemu_irq fdc_tc;
unsigned long kernel_size;
DriveInfo *fd[MAX_FD];
FWCfgState *fw_cfg;
unsigned int num_vsimms;
/* init CPUs */
if (!cpu_model)
cpu_model = hwdef->default_cpu_model;
for(i = 0; i < smp_cpus; i++) {
cpu_devinit(cpu_model, i, hwdef->slavio_base, &cpu_irqs[i]);
}
for (i = smp_cpus; i < MAX_CPUS; i++)
cpu_irqs[i] = qemu_allocate_irqs(dummy_cpu_set_irq, NULL, MAX_PILS);
/* set up devices */
ram_init(0, machine->ram_size, hwdef->max_mem);
/* models without ECC don't trap when missing ram is accessed */
if (!hwdef->ecc_base) {
empty_slot_init(machine->ram_size, hwdef->max_mem - machine->ram_size);
}
prom_init(hwdef->slavio_base, bios_name);
slavio_intctl = slavio_intctl_init(hwdef->intctl_base,
hwdef->intctl_base + 0x10000ULL,
cpu_irqs);
for (i = 0; i < 32; i++) {
slavio_irq[i] = qdev_get_gpio_in(slavio_intctl, i);
}
for (i = 0; i < MAX_CPUS; i++) {
slavio_cpu_irq[i] = qdev_get_gpio_in(slavio_intctl, 32 + i);
}
if (hwdef->idreg_base) {
idreg_init(hwdef->idreg_base);
}
if (hwdef->afx_base) {
afx_init(hwdef->afx_base);
}
iommu = iommu_init(hwdef->iommu_base, hwdef->iommu_version,
slavio_irq[30]);
if (hwdef->iommu_pad_base) {
/* On the real hardware (SS-5, LX) the MMU is not padded, but aliased.
Software shouldn't use aliased addresses, neither should it crash
when does. Using empty_slot instead of aliasing can help with
debugging such accesses */
empty_slot_init(hwdef->iommu_pad_base,hwdef->iommu_pad_len);
}
espdma = sparc32_dma_init(hwdef->dma_base, slavio_irq[18],
iommu, &espdma_irq, 0);
ledma = sparc32_dma_init(hwdef->dma_base + 16ULL,
slavio_irq[16], iommu, &ledma_irq, 1);
if (graphic_depth != 8 && graphic_depth != 24) {
error_report("Unsupported depth: %d", graphic_depth);
exit (1);
}
num_vsimms = 0;
if (num_vsimms == 0) {
if (vga_interface_type == VGA_CG3) {
if (graphic_depth != 8) {
error_report("Unsupported depth: %d", graphic_depth);
exit(1);
}
if (!(graphic_width == 1024 && graphic_height == 768) &&
!(graphic_width == 1152 && graphic_height == 900)) {
error_report("Unsupported resolution: %d x %d", graphic_width,
graphic_height);
exit(1);
}
/* sbus irq 5 */
cg3_init(hwdef->tcx_base, slavio_irq[11], 0x00100000,
graphic_width, graphic_height, graphic_depth);
} else {
/* If no display specified, default to TCX */
if (graphic_depth != 8 && graphic_depth != 24) {
error_report("Unsupported depth: %d", graphic_depth);
exit(1);
}
if (!(graphic_width == 1024 && graphic_height == 768)) {
error_report("Unsupported resolution: %d x %d",
graphic_width, graphic_height);
exit(1);
}
tcx_init(hwdef->tcx_base, slavio_irq[11], 0x00100000,
graphic_width, graphic_height, graphic_depth);
}
}
for (i = num_vsimms; i < MAX_VSIMMS; i++) {
/* vsimm registers probed by OBP */
if (hwdef->vsimm[i].reg_base) {
empty_slot_init(hwdef->vsimm[i].reg_base, 0x2000);
}
}
if (hwdef->sx_base) {
empty_slot_init(hwdef->sx_base, 0x2000);
}
lance_init(&nd_table[0], hwdef->le_base, ledma, ledma_irq);
nvram = m48t59_init(slavio_irq[0], hwdef->nvram_base, 0, 0x2000, 1968, 8);
slavio_timer_init_all(hwdef->counter_base, slavio_irq[19], slavio_cpu_irq, smp_cpus);
slavio_serial_ms_kbd_init(hwdef->ms_kb_base, slavio_irq[14],
display_type == DT_NOGRAPHIC, ESCC_CLOCK, 1);
/* Slavio TTYA (base+4, Linux ttyS0) is the first QEMU serial device
Slavio TTYB (base+0, Linux ttyS1) is the second QEMU serial device */
escc_init(hwdef->serial_base, slavio_irq[15], slavio_irq[15],
serial_hds[0], serial_hds[1], ESCC_CLOCK, 1);
if (hwdef->apc_base) {
apc_init(hwdef->apc_base, qemu_allocate_irq(cpu_halt_signal, NULL, 0));
}
if (hwdef->fd_base) {
/* there is zero or one floppy drive */
memset(fd, 0, sizeof(fd));
fd[0] = drive_get(IF_FLOPPY, 0, 0);
sun4m_fdctrl_init(slavio_irq[22], hwdef->fd_base, fd,
&fdc_tc);
} else {
fdc_tc = qemu_allocate_irq(dummy_fdc_tc, NULL, 0);
}
slavio_misc_init(hwdef->slavio_base, hwdef->aux1_base, hwdef->aux2_base,
slavio_irq[30], fdc_tc);
if (drive_get_max_bus(IF_SCSI) > 0) {
fprintf(stderr, "qemu: too many SCSI bus\n");
exit(1);
}
esp_init(hwdef->esp_base, 2,
espdma_memory_read, espdma_memory_write,
espdma, espdma_irq, &esp_reset, &dma_enable);
qdev_connect_gpio_out(espdma, 0, esp_reset);
qdev_connect_gpio_out(espdma, 1, dma_enable);
if (hwdef->cs_base) {
sysbus_create_simple("SUNW,CS4231", hwdef->cs_base,
slavio_irq[5]);
}
if (hwdef->dbri_base) {
/* ISDN chip with attached CS4215 audio codec */
/* prom space */
empty_slot_init(hwdef->dbri_base+0x1000, 0x30);
/* reg space */
empty_slot_init(hwdef->dbri_base+0x10000, 0x100);
}
if (hwdef->bpp_base) {
/* parallel port */
empty_slot_init(hwdef->bpp_base, 0x20);
}
kernel_size = sun4m_load_kernel(machine->kernel_filename,
machine->initrd_filename,
machine->ram_size);
nvram_init(nvram, (uint8_t *)&nd_table[0].macaddr, machine->kernel_cmdline,
machine->boot_order, machine->ram_size, kernel_size,
graphic_width, graphic_height, graphic_depth,
hwdef->nvram_machine_id, "Sun4m");
if (hwdef->ecc_base)
ecc_init(hwdef->ecc_base, slavio_irq[28],
hwdef->ecc_version);
fw_cfg = fw_cfg_init_mem(CFG_ADDR, CFG_ADDR + 2);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, hwdef->machine_id);
fw_cfg_add_i16(fw_cfg, FW_CFG_SUN4M_DEPTH, graphic_depth);
fw_cfg_add_i16(fw_cfg, FW_CFG_SUN4M_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_SUN4M_HEIGHT, graphic_height);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, KERNEL_LOAD_ADDR);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (machine->kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, CMDLINE_ADDR);
pstrcpy_targphys("cmdline", CMDLINE_ADDR, TARGET_PAGE_SIZE,
machine->kernel_cmdline);
fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, machine->kernel_cmdline);
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
strlen(machine->kernel_cmdline) + 1);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, 0);
}
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, INITRD_LOAD_ADDR);
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, 0); // not used
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, machine->boot_order[0]);
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
static void lm32_evr_init(MachineState *machine)
{
const char *cpu_model = machine->cpu_model;
const char *kernel_filename = machine->kernel_filename;
LM32CPU *cpu;
CPULM32State *env;
DriveInfo *dinfo;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq irq[32];
ResetInfo *reset_info;
int i;
/* memory map */
hwaddr flash_base = 0x04000000;
size_t flash_sector_size = 256 * 1024;
size_t flash_size = 32 * 1024 * 1024;
hwaddr ram_base = 0x08000000;
size_t ram_size = 64 * 1024 * 1024;
hwaddr timer0_base = 0x80002000;
hwaddr uart0_base = 0x80006000;
hwaddr timer1_base = 0x8000a000;
int uart0_irq = 0;
int timer0_irq = 1;
int timer1_irq = 3;
reset_info = g_malloc0(sizeof(ResetInfo));
if (cpu_model == NULL) {
cpu_model = "lm32-full";
}
cpu = cpu_lm32_init(cpu_model);
if (cpu == NULL) {
fprintf(stderr, "qemu: unable to find CPU '%s'\n", cpu_model);
exit(1);
}
env = &cpu->env;
reset_info->cpu = cpu;
reset_info->flash_base = flash_base;
memory_region_allocate_system_memory(phys_ram, NULL, "lm32_evr.sdram",
ram_size);
memory_region_add_subregion(address_space_mem, ram_base, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
/* Spansion S29NS128P */
pflash_cfi02_register(flash_base, NULL, "lm32_evr.flash", flash_size,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
flash_sector_size, flash_size / flash_sector_size,
1, 2, 0x01, 0x7e, 0x43, 0x00, 0x555, 0x2aa, 1);
/* create irq lines */
env->pic_state = lm32_pic_init(qemu_allocate_irq(cpu_irq_handler, cpu, 0));
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(env->pic_state, i);
}
lm32_uart_create(uart0_base, irq[uart0_irq], serial_hds[0]);
sysbus_create_simple("lm32-timer", timer0_base, irq[timer0_irq]);
sysbus_create_simple("lm32-timer", timer1_base, irq[timer1_irq]);
/* make sure juart isn't the first chardev */
env->juart_state = lm32_juart_init(serial_hds[1]);
reset_info->bootstrap_pc = flash_base;
if (kernel_filename) {
uint64_t entry;
int kernel_size;
kernel_size = load_elf(kernel_filename, NULL, NULL, &entry, NULL, NULL,
1, EM_LATTICEMICO32, 0, 0);
reset_info->bootstrap_pc = entry;
if (kernel_size < 0) {
kernel_size = load_image_targphys(kernel_filename, ram_base,
ram_size);
reset_info->bootstrap_pc = ram_base;
}
if (kernel_size < 0) {
fprintf(stderr, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
}
qemu_register_reset(main_cpu_reset, reset_info);
}
static void z2_init(MachineState *machine)
{
const char *cpu_model = machine->cpu_model;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
MemoryRegion *address_space_mem = get_system_memory();
uint32_t sector_len = 0x10000;
PXA2xxState *mpu;
DriveInfo *dinfo;
int be;
void *z2_lcd;
I2CBus *bus;
DeviceState *wm;
if (!cpu_model) {
cpu_model = "pxa270-c5";
}
/* Setup CPU & memory */
mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, cpu_model);
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo && !qtest_enabled()) {
fprintf(stderr, "Flash image must be given with the "
"'pflash' parameter\n");
exit(1);
}
if (!pflash_cfi01_register(Z2_FLASH_BASE,
NULL, "z2.flash0", Z2_FLASH_SIZE,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
sector_len, Z2_FLASH_SIZE / sector_len,
4, 0, 0, 0, 0, be)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
exit(1);
}
/* setup keypad */
pxa27x_register_keypad(mpu->kp, map, 0x100);
/* MMC/SD host */
pxa2xx_mmci_handlers(mpu->mmc,
NULL,
qdev_get_gpio_in(mpu->gpio, Z2_GPIO_SD_DETECT));
type_register_static(&zipit_lcd_info);
type_register_static(&aer915_info);
z2_lcd = ssi_create_slave(mpu->ssp[1], "zipit-lcd");
bus = pxa2xx_i2c_bus(mpu->i2c[0]);
i2c_create_slave(bus, TYPE_AER915, 0x55);
wm = i2c_create_slave(bus, "wm8750", 0x1b);
mpu->i2s->opaque = wm;
mpu->i2s->codec_out = wm8750_dac_dat;
mpu->i2s->codec_in = wm8750_adc_dat;
wm8750_data_req_set(wm, mpu->i2s->data_req, mpu->i2s);
qdev_connect_gpio_out(mpu->gpio, Z2_GPIO_LCD_CS,
qemu_allocate_irq(z2_lcd_cs, z2_lcd, 0));
z2_binfo.kernel_filename = kernel_filename;
z2_binfo.kernel_cmdline = kernel_cmdline;
z2_binfo.initrd_filename = initrd_filename;
z2_binfo.board_id = 0x6dd;
arm_load_kernel(mpu->cpu, &z2_binfo);
}
PCIBus *dino_init(MemoryRegion *addr_space,
qemu_irq *p_rtc_irq, qemu_irq *p_ser_irq)
{
DeviceState *dev;
DinoState *s;
PCIBus *b;
int i;
dev = qdev_create(NULL, TYPE_DINO_PCI_HOST_BRIDGE);
s = DINO_PCI_HOST_BRIDGE(dev);
/* Dino PCI access from main memory. */
memory_region_init_io(&s->this_mem, OBJECT(s), &dino_chip_ops,
s, "dino", 4096);
memory_region_add_subregion(addr_space, DINO_HPA, &s->this_mem);
/* Dino PCI config. */
memory_region_init_io(&s->parent_obj.conf_mem, OBJECT(&s->parent_obj),
&pci_host_conf_be_ops, dev, "pci-conf-idx", 4);
memory_region_init_io(&s->parent_obj.data_mem, OBJECT(&s->parent_obj),
&dino_config_data_ops, dev, "pci-conf-data", 4);
memory_region_add_subregion(&s->this_mem, DINO_PCI_CONFIG_ADDR,
&s->parent_obj.conf_mem);
memory_region_add_subregion(&s->this_mem, DINO_CONFIG_DATA,
&s->parent_obj.data_mem);
/* Dino PCI bus memory. */
memory_region_init(&s->pci_mem, OBJECT(s), "pci-memory", 1ull << 32);
b = pci_register_root_bus(dev, "pci", dino_set_irq, dino_pci_map_irq, s,
&s->pci_mem, get_system_io(),
PCI_DEVFN(0, 0), 32, TYPE_PCI_BUS);
s->parent_obj.bus = b;
qdev_init_nofail(dev);
/* Set up windows into PCI bus memory. */
for (i = 1; i < 31; i++) {
uint32_t addr = 0xf0000000 + i * DINO_MEM_CHUNK_SIZE;
char *name = g_strdup_printf("PCI Outbound Window %d", i);
memory_region_init_alias(&s->pci_mem_alias[i], OBJECT(s),
name, &s->pci_mem, addr,
DINO_MEM_CHUNK_SIZE);
}
/* Set up PCI view of memory: Bus master address space. */
memory_region_init(&s->bm, OBJECT(s), "bm-dino", 1ull << 32);
memory_region_init_alias(&s->bm_ram_alias, OBJECT(s),
"bm-system", addr_space, 0,
0xf0000000 + DINO_MEM_CHUNK_SIZE);
memory_region_init_alias(&s->bm_pci_alias, OBJECT(s),
"bm-pci", &s->pci_mem,
0xf0000000 + DINO_MEM_CHUNK_SIZE,
30 * DINO_MEM_CHUNK_SIZE);
memory_region_init_alias(&s->bm_cpu_alias, OBJECT(s),
"bm-cpu", addr_space, 0xfff00000,
0xfffff);
memory_region_add_subregion(&s->bm, 0,
&s->bm_ram_alias);
memory_region_add_subregion(&s->bm,
0xf0000000 + DINO_MEM_CHUNK_SIZE,
&s->bm_pci_alias);
memory_region_add_subregion(&s->bm, 0xfff00000,
&s->bm_cpu_alias);
address_space_init(&s->bm_as, &s->bm, "pci-bm");
pci_setup_iommu(b, dino_pcihost_set_iommu, s);
*p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
*p_ser_irq = qemu_allocate_irq(dino_set_serial_irq, s, 0);
return b;
}
/* PC hardware initialisation */
static void pc_init1(MachineState *machine,
const char *host_type, const char *pci_type)
{
PCMachineState *pcms = PC_MACHINE(machine);
PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *system_io = get_system_io();
int i;
PCIBus *pci_bus;
ISABus *isa_bus;
PCII440FXState *i440fx_state;
int piix3_devfn = -1;
qemu_irq *gsi;
qemu_irq *i8259;
qemu_irq smi_irq;
GSIState *gsi_state;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
BusState *idebus[MAX_IDE_BUS];
ISADevice *rtc_state;
MemoryRegion *ram_memory;
MemoryRegion *pci_memory;
MemoryRegion *rom_memory;
ram_addr_t lowmem;
/*
* Calculate ram split, for memory below and above 4G. It's a bit
* complicated for backward compatibility reasons ...
*
* - Traditional split is 3.5G (lowmem = 0xe0000000). This is the
* default value for max_ram_below_4g now.
*
* - Then, to gigabyte align the memory, we move the split to 3G
* (lowmem = 0xc0000000). But only in case we have to split in
* the first place, i.e. ram_size is larger than (traditional)
* lowmem. And for new machine types (gigabyte_align = true)
* only, for live migration compatibility reasons.
*
* - Next the max-ram-below-4g option was added, which allowed to
* reduce lowmem to a smaller value, to allow a larger PCI I/O
* window below 4G. qemu doesn't enforce gigabyte alignment here,
* but prints a warning.
*
* - Finally max-ram-below-4g got updated to also allow raising lowmem,
* so legacy non-PAE guests can get as much memory as possible in
* the 32bit address space below 4G.
*
* - Note that Xen has its own ram setp code in xen_ram_init(),
* called via xen_hvm_init().
*
* Examples:
* qemu -M pc-1.7 -m 4G (old default) -> 3584M low, 512M high
* qemu -M pc -m 4G (new default) -> 3072M low, 1024M high
* qemu -M pc,max-ram-below-4g=2G -m 4G -> 2048M low, 2048M high
* qemu -M pc,max-ram-below-4g=4G -m 3968M -> 3968M low (=4G-128M)
*/
if (xen_enabled()) {
xen_hvm_init(pcms, &ram_memory);
} else {
if (!pcms->max_ram_below_4g) {
pcms->max_ram_below_4g = 0xe0000000; /* default: 3.5G */
}
lowmem = pcms->max_ram_below_4g;
if (machine->ram_size >= pcms->max_ram_below_4g) {
if (pcmc->gigabyte_align) {
if (lowmem > 0xc0000000) {
lowmem = 0xc0000000;
}
if (lowmem & ((1ULL << 30) - 1)) {
error_report("Warning: Large machine and max_ram_below_4g "
"(%" PRIu64 ") not a multiple of 1G; "
"possible bad performance.",
pcms->max_ram_below_4g);
}
}
}
if (machine->ram_size >= lowmem) {
pcms->above_4g_mem_size = machine->ram_size - lowmem;
pcms->below_4g_mem_size = lowmem;
} else {
pcms->above_4g_mem_size = 0;
pcms->below_4g_mem_size = machine->ram_size;
}
}
pc_cpus_init(pcms);
if (kvm_enabled() && pcmc->kvmclock_enabled) {
kvmclock_create();
}
if (pcmc->pci_enabled) {
pci_memory = g_new(MemoryRegion, 1);
memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
rom_memory = pci_memory;
} else {
pci_memory = NULL;
rom_memory = system_memory;
}
pc_guest_info_init(pcms);
if (pcmc->smbios_defaults) {
MachineClass *mc = MACHINE_GET_CLASS(machine);
/* These values are guest ABI, do not change */
smbios_set_defaults("QEMU", "Standard PC (i440FX + PIIX, 1996)",
mc->name, pcmc->smbios_legacy_mode,
pcmc->smbios_uuid_encoded,
SMBIOS_ENTRY_POINT_21);
}
/* allocate ram and load rom/bios */
if (!xen_enabled()) {
pc_memory_init(pcms, system_memory,
rom_memory, &ram_memory);
} else if (machine->kernel_filename != NULL) {
/* For xen HVM direct kernel boot, load linux here */
xen_load_linux(pcms);
}
gsi_state = g_malloc0(sizeof(*gsi_state));
if (kvm_ioapic_in_kernel()) {
kvm_pc_setup_irq_routing(pcmc->pci_enabled);
gsi = qemu_allocate_irqs(kvm_pc_gsi_handler, gsi_state,
GSI_NUM_PINS);
} else {
gsi = qemu_allocate_irqs(gsi_handler, gsi_state, GSI_NUM_PINS);
}
if (pcmc->pci_enabled) {
pci_bus = i440fx_init(host_type,
pci_type,
&i440fx_state, &piix3_devfn, &isa_bus, gsi,
system_memory, system_io, machine->ram_size,
pcms->below_4g_mem_size,
pcms->above_4g_mem_size,
pci_memory, ram_memory);
pcms->bus = pci_bus;
} else {
pci_bus = NULL;
i440fx_state = NULL;
isa_bus = isa_bus_new(NULL, get_system_memory(), system_io,
&error_abort);
no_hpet = 1;
}
isa_bus_irqs(isa_bus, gsi);
if (kvm_pic_in_kernel()) {
i8259 = kvm_i8259_init(isa_bus);
} else if (xen_enabled()) {
i8259 = xen_interrupt_controller_init();
} else {
i8259 = i8259_init(isa_bus, pc_allocate_cpu_irq());
}
for (i = 0; i < ISA_NUM_IRQS; i++) {
gsi_state->i8259_irq[i] = i8259[i];
}
g_free(i8259);
if (pcmc->pci_enabled) {
ioapic_init_gsi(gsi_state, "i440fx");
}
pc_register_ferr_irq(gsi[13]);
pc_vga_init(isa_bus, pcmc->pci_enabled ? pci_bus : NULL);
assert(pcms->vmport != ON_OFF_AUTO__MAX);
if (pcms->vmport == ON_OFF_AUTO_AUTO) {
pcms->vmport = xen_enabled() ? ON_OFF_AUTO_OFF : ON_OFF_AUTO_ON;
}
/* init basic PC hardware */
pc_basic_device_init(isa_bus, gsi, &rtc_state, true,
(pcms->vmport != ON_OFF_AUTO_ON), 0x4);
pc_nic_init(isa_bus, pci_bus);
ide_drive_get(hd, ARRAY_SIZE(hd));
if (pcmc->pci_enabled) {
PCIDevice *dev;
if (xen_enabled()) {
dev = pci_piix3_xen_ide_init(pci_bus, hd, piix3_devfn + 1);
} else {
dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
}
idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
} else {
for(i = 0; i < MAX_IDE_BUS; i++) {
ISADevice *dev;
char busname[] = "ide.0";
dev = isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i],
ide_irq[i],
hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
/*
* The ide bus name is ide.0 for the first bus and ide.1 for the
* second one.
*/
busname[4] = '0' + i;
idebus[i] = qdev_get_child_bus(DEVICE(dev), busname);
}
}
pc_cmos_init(pcms, idebus[0], idebus[1], rtc_state);
if (pcmc->pci_enabled && machine_usb(machine)) {
pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
}
if (pcmc->pci_enabled && acpi_enabled) {
DeviceState *piix4_pm;
I2CBus *smbus;
smi_irq = qemu_allocate_irq(pc_acpi_smi_interrupt, first_cpu, 0);
/* TODO: Populate SPD eeprom data. */
smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
gsi[9], smi_irq,
pc_machine_is_smm_enabled(pcms),
&piix4_pm);
smbus_eeprom_init(smbus, 8, NULL, 0);
object_property_add_link(OBJECT(machine), PC_MACHINE_ACPI_DEVICE_PROP,
TYPE_HOTPLUG_HANDLER,
(Object **)&pcms->acpi_dev,
object_property_allow_set_link,
OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort);
object_property_set_link(OBJECT(machine), OBJECT(piix4_pm),
PC_MACHINE_ACPI_DEVICE_PROP, &error_abort);
}
if (pcmc->pci_enabled) {
pc_pci_device_init(pci_bus);
}
if (pcms->acpi_nvdimm_state.is_enabled) {
nvdimm_init_acpi_state(&pcms->acpi_nvdimm_state, system_io,
pcms->fw_cfg, OBJECT(pcms));
}
}
static void
milkymist_init(MachineState *machine)
{
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
LM32CPU *cpu;
CPULM32State *env;
int kernel_size;
DriveInfo *dinfo;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *phys_sdram = g_new(MemoryRegion, 1);
qemu_irq irq[32];
int i;
char *bios_filename;
ResetInfo *reset_info;
/* memory map */
hwaddr flash_base = 0x00000000;
size_t flash_sector_size = 128 * KiB;
size_t flash_size = 32 * MiB;
hwaddr sdram_base = 0x40000000;
size_t sdram_size = 128 * MiB;
hwaddr initrd_base = sdram_base + 0x1002000;
hwaddr cmdline_base = sdram_base + 0x1000000;
size_t initrd_max = sdram_size - 0x1002000;
reset_info = g_malloc0(sizeof(ResetInfo));
cpu = LM32_CPU(cpu_create(machine->cpu_type));
env = &cpu->env;
reset_info->cpu = cpu;
cpu_lm32_set_phys_msb_ignore(env, 1);
memory_region_allocate_system_memory(phys_sdram, NULL, "milkymist.sdram",
sdram_size);
memory_region_add_subregion(address_space_mem, sdram_base, phys_sdram);
dinfo = drive_get(IF_PFLASH, 0, 0);
/* Numonyx JS28F256J3F105 */
pflash_cfi01_register(flash_base, "milkymist.flash", flash_size,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
flash_sector_size, 2, 0x00, 0x89, 0x00, 0x1d, 1);
/* create irq lines */
env->pic_state = lm32_pic_init(qemu_allocate_irq(cpu_irq_handler, cpu, 0));
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(env->pic_state, i);
}
/* load bios rom */
if (bios_name == NULL) {
bios_name = BIOS_FILENAME;
}
bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (bios_filename) {
if (load_image_targphys(bios_filename, BIOS_OFFSET, BIOS_SIZE) < 0) {
error_report("could not load bios '%s'", bios_filename);
exit(1);
}
}
reset_info->bootstrap_pc = BIOS_OFFSET;
/* if no kernel is given no valid bios rom is a fatal error */
if (!kernel_filename && !dinfo && !bios_filename && !qtest_enabled()) {
error_report("could not load Milkymist One bios '%s'", bios_name);
exit(1);
}
g_free(bios_filename);
milkymist_uart_create(0x60000000, irq[0], serial_hd(0));
milkymist_sysctl_create(0x60001000, irq[1], irq[2], irq[3],
80000000, 0x10014d31, 0x0000041f, 0x00000001);
milkymist_hpdmc_create(0x60002000);
milkymist_vgafb_create(0x60003000, 0x40000000, 0x0fffffff);
milkymist_memcard_create(0x60004000);
milkymist_ac97_create(0x60005000, irq[4], irq[5], irq[6], irq[7]);
milkymist_pfpu_create(0x60006000, irq[8]);
if (machine->enable_graphics) {
milkymist_tmu2_create(0x60007000, irq[9]);
}
milkymist_minimac2_create(0x60008000, 0x30000000, irq[10], irq[11]);
milkymist_softusb_create(0x6000f000, irq[15],
0x20000000, 0x1000, 0x20020000, 0x2000);
/* make sure juart isn't the first chardev */
env->juart_state = lm32_juart_init(serial_hd(1));
if (kernel_filename) {
uint64_t entry;
/* Boots a kernel elf binary. */
kernel_size = load_elf(kernel_filename, NULL, NULL, NULL,
&entry, NULL, NULL,
1, EM_LATTICEMICO32, 0, 0);
reset_info->bootstrap_pc = entry;
if (kernel_size < 0) {
kernel_size = load_image_targphys(kernel_filename, sdram_base,
sdram_size);
reset_info->bootstrap_pc = sdram_base;
}
if (kernel_size < 0) {
error_report("could not load kernel '%s'", kernel_filename);
exit(1);
}
}
if (kernel_cmdline && strlen(kernel_cmdline)) {
pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE,
kernel_cmdline);
reset_info->cmdline_base = (uint32_t)cmdline_base;
}
if (initrd_filename) {
size_t initrd_size;
initrd_size = load_image_targphys(initrd_filename, initrd_base,
initrd_max);
reset_info->initrd_base = (uint32_t)initrd_base;
reset_info->initrd_size = (uint32_t)initrd_size;
}
qemu_register_reset(main_cpu_reset, reset_info);
}
static void lm32_uclinux_init(MachineState *machine)
{
const char *cpu_model = machine->cpu_model;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
LM32CPU *cpu;
CPULM32State *env;
DriveInfo *dinfo;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq irq[32];
HWSetup *hw;
ResetInfo *reset_info;
int i;
/* memory map */
hwaddr flash_base = 0x04000000;
size_t flash_sector_size = 256 * 1024;
size_t flash_size = 32 * 1024 * 1024;
hwaddr ram_base = 0x08000000;
size_t ram_size = 64 * 1024 * 1024;
hwaddr uart0_base = 0x80000000;
hwaddr timer0_base = 0x80002000;
hwaddr timer1_base = 0x80010000;
hwaddr timer2_base = 0x80012000;
int uart0_irq = 0;
int timer0_irq = 1;
int timer1_irq = 20;
int timer2_irq = 21;
hwaddr hwsetup_base = 0x0bffe000;
hwaddr cmdline_base = 0x0bfff000;
hwaddr initrd_base = 0x08400000;
size_t initrd_max = 0x01000000;
reset_info = g_malloc0(sizeof(ResetInfo));
if (cpu_model == NULL) {
cpu_model = "lm32-full";
}
cpu = cpu_lm32_init(cpu_model);
if (cpu == NULL) {
fprintf(stderr, "qemu: unable to find CPU '%s'\n", cpu_model);
exit(1);
}
env = &cpu->env;
reset_info->cpu = cpu;
reset_info->flash_base = flash_base;
memory_region_allocate_system_memory(phys_ram, NULL,
"lm32_uclinux.sdram", ram_size);
memory_region_add_subregion(address_space_mem, ram_base, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
/* Spansion S29NS128P */
pflash_cfi02_register(flash_base, NULL, "lm32_uclinux.flash", flash_size,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
flash_sector_size, flash_size / flash_sector_size,
1, 2, 0x01, 0x7e, 0x43, 0x00, 0x555, 0x2aa, 1);
/* create irq lines */
env->pic_state = lm32_pic_init(qemu_allocate_irq(cpu_irq_handler, env, 0));
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(env->pic_state, i);
}
lm32_uart_create(uart0_base, irq[uart0_irq], serial_hds[0]);
sysbus_create_simple("lm32-timer", timer0_base, irq[timer0_irq]);
sysbus_create_simple("lm32-timer", timer1_base, irq[timer1_irq]);
sysbus_create_simple("lm32-timer", timer2_base, irq[timer2_irq]);
/* make sure juart isn't the first chardev */
env->juart_state = lm32_juart_init(serial_hds[1]);
reset_info->bootstrap_pc = flash_base;
if (kernel_filename) {
uint64_t entry;
int kernel_size;
kernel_size = load_elf(kernel_filename, NULL, NULL, &entry, NULL, NULL,
1, EM_LATTICEMICO32, 0, 0);
reset_info->bootstrap_pc = entry;
if (kernel_size < 0) {
kernel_size = load_image_targphys(kernel_filename, ram_base,
ram_size);
reset_info->bootstrap_pc = ram_base;
}
if (kernel_size < 0) {
fprintf(stderr, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
}
/* generate a rom with the hardware description */
hw = hwsetup_init();
hwsetup_add_cpu(hw, "LM32", 75000000);
hwsetup_add_flash(hw, "flash", flash_base, flash_size);
hwsetup_add_ddr_sdram(hw, "ddr_sdram", ram_base, ram_size);
hwsetup_add_timer(hw, "timer0", timer0_base, timer0_irq);
hwsetup_add_timer(hw, "timer1_dev_only", timer1_base, timer1_irq);
hwsetup_add_timer(hw, "timer2_dev_only", timer2_base, timer2_irq);
hwsetup_add_uart(hw, "uart", uart0_base, uart0_irq);
hwsetup_add_trailer(hw);
hwsetup_create_rom(hw, hwsetup_base);
hwsetup_free(hw);
reset_info->hwsetup_base = hwsetup_base;
if (kernel_cmdline && strlen(kernel_cmdline)) {
pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE,
kernel_cmdline);
reset_info->cmdline_base = cmdline_base;
}
if (initrd_filename) {
size_t initrd_size;
initrd_size = load_image_targphys(initrd_filename, initrd_base,
initrd_max);
reset_info->initrd_base = initrd_base;
reset_info->initrd_size = initrd_size;
}
qemu_register_reset(main_cpu_reset, reset_info);
}
qemu_irq sh7750_irl(SH7750State *s)
{
sh_intc_toggle_source(sh_intc_source(&s->intc, IRL), 1, 0); /* enable */
return qemu_allocate_irq(sh_intc_set_irl, sh_intc_source(&s->intc, IRL), 0);
}
static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)
{
MSF2State *s = MSF2_SOC(dev_soc);
DeviceState *dev, *armv7m;
SysBusDevice *busdev;
Error *err = NULL;
int i;
MemoryRegion *system_memory = get_system_memory();
MemoryRegion *nvm = g_new(MemoryRegion, 1);
MemoryRegion *nvm_alias = g_new(MemoryRegion, 1);
MemoryRegion *sram = g_new(MemoryRegion, 1);
memory_region_init_rom(nvm, NULL, "MSF2.eNVM", s->envm_size,
&error_fatal);
/*
* On power-on, the eNVM region 0x60000000 is automatically
* remapped to the Cortex-M3 processor executable region
* start address (0x0). We do not support remapping other eNVM,
* eSRAM and DDR regions by guest(via Sysreg) currently.
*/
memory_region_init_alias(nvm_alias, NULL, "MSF2.eNVM",
nvm, 0, s->envm_size);
memory_region_add_subregion(system_memory, ENVM_BASE_ADDRESS, nvm);
memory_region_add_subregion(system_memory, 0, nvm_alias);
memory_region_init_ram(sram, NULL, "MSF2.eSRAM", s->esram_size,
&error_fatal);
memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram);
armv7m = DEVICE(&s->armv7m);
qdev_prop_set_uint32(armv7m, "num-irq", 81);
qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type);
qdev_prop_set_bit(armv7m, "enable-bitband", true);
object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()),
"memory", &error_abort);
object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
if (!s->m3clk) {
error_setg(errp, "Invalid m3clk value");
error_append_hint(errp, "m3clk can not be zero\n");
return;
}
qdev_connect_gpio_out_named(DEVICE(&s->armv7m.nvic), "SYSRESETREQ", 0,
qemu_allocate_irq(&do_sys_reset, NULL, 0));
system_clock_scale = NANOSECONDS_PER_SECOND / s->m3clk;
for (i = 0; i < MSF2_NUM_UARTS; i++) {
if (serial_hd(i)) {
serial_mm_init(get_system_memory(), uart_addr[i], 2,
qdev_get_gpio_in(armv7m, uart_irq[i]),
115200, serial_hd(i), DEVICE_NATIVE_ENDIAN);
}
}
dev = DEVICE(&s->timer);
/* APB0 clock is the timer input clock */
qdev_prop_set_uint32(dev, "clock-frequency", s->m3clk / s->apb0div);
object_property_set_bool(OBJECT(&s->timer), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, MSF2_TIMER_BASE);
sysbus_connect_irq(busdev, 0,
qdev_get_gpio_in(armv7m, timer_irq[0]));
sysbus_connect_irq(busdev, 1,
qdev_get_gpio_in(armv7m, timer_irq[1]));
dev = DEVICE(&s->sysreg);
qdev_prop_set_uint32(dev, "apb0divisor", s->apb0div);
qdev_prop_set_uint32(dev, "apb1divisor", s->apb1div);
object_property_set_bool(OBJECT(&s->sysreg), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, MSF2_SYSREG_BASE);
for (i = 0; i < MSF2_NUM_SPIS; i++) {
gchar *bus_name;
object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err);
if (err != NULL) {
error_propagate(errp, err);
return;
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
qdev_get_gpio_in(armv7m, spi_irq[i]));
/* Alias controller SPI bus to the SoC itself */
bus_name = g_strdup_printf("spi%d", i);
object_property_add_alias(OBJECT(s), bus_name,
OBJECT(&s->spi[i]), "spi",
&error_abort);
g_free(bus_name);
}
/* Below devices are not modelled yet. */
create_unimplemented_device("i2c_0", 0x40002000, 0x1000);
create_unimplemented_device("dma", 0x40003000, 0x1000);
create_unimplemented_device("watchdog", 0x40005000, 0x1000);
create_unimplemented_device("i2c_1", 0x40012000, 0x1000);
create_unimplemented_device("gpio", 0x40013000, 0x1000);
create_unimplemented_device("hs-dma", 0x40014000, 0x1000);
create_unimplemented_device("can", 0x40015000, 0x1000);
create_unimplemented_device("rtc", 0x40017000, 0x1000);
create_unimplemented_device("apb_config", 0x40020000, 0x10000);
create_unimplemented_device("emac", 0x40041000, 0x1000);
create_unimplemented_device("usb", 0x40043000, 0x1000);
}
