Ejemplo n.º 1
0
void user_init(void)
{
    uart_set_baud(0, 115200);

    rboot_config conf = rboot_get_config();
    printf("esp-gizmo. Running on flash slot %d / %d\n",
           conf.current_rom, conf.count);

    key_task_init();
    load_driver_init();
    mqtt_task_init();

    struct sdk_station_config config = {
        .ssid = WIFI_SSID,
        .password = WIFI_PASS,
    };

    /* required to call wifi_set_opmode before station_set_config */
    sdk_wifi_set_opmode(STATION_MODE);
    sdk_wifi_station_set_config(&config);

    printf("Starting TFTP server...");
    ota_tftp_init_server(TFTP_PORT);

    xTaskCreate(main_task, "main", 1024, NULL, 1, NULL);
    xTaskCreate(health_state, "health_state", 512, NULL, 1, NULL);
}
Ejemplo n.º 2
0
void otaUpdateHandler()
{
	uint8 slot;
	rboot_config bootconf;
	
	Debug.println("Updating...");
	
	// need a clean object, otherwise if run before and failed will not run again
	if (otaUpdater) delete otaUpdater;
	otaUpdater = new rBootHttpUpdate();
	
	// select rom slot to flash
	bootconf = rboot_get_config();
	slot = bootconf.current_rom;
	if (slot == 0) slot = 1; else slot = 0;

	// flash rom to position indicated in the rBoot config rom table
	otaUpdater->addItem(bootconf.roms[slot], otaBaseUrl + ROM_0_FNAME);
	
#ifndef DISABLE_SPIFFS
	// use user supplied values (defaults for 4mb flash in makefile)
	if (slot == 0) {
		otaUpdater->addItem(RBOOT_SPIFFS_0, otaBaseUrl + SPIFFS_FNAME);
	} else {
		otaUpdater->addItem(RBOOT_SPIFFS_1, otaBaseUrl + SPIFFS_FNAME);
	}
#endif

	// set a callback (called on failure or success without switching requested)
	otaUpdater->setCallback(otaUpdateDelegate(otaUpdate_CallBack));

	// start update
	otaUpdater->start();
}
Ejemplo n.º 3
0
// set current boot rom
bool ICACHE_FLASH_ATTR rboot_set_current_rom(uint8 rom) {
	rboot_config conf;
	conf = rboot_get_config();
	if (rom >= conf.count) return false;
	conf.current_rom = rom;
	return rboot_set_config(&conf);
}
Ejemplo n.º 4
0
rboot_config *get_rboot_config() {
  static rboot_config *cfg = NULL;
  if (cfg == NULL) {
    cfg = malloc(sizeof(*cfg));
    *cfg = rboot_get_config();
  }

  return cfg;
}
Ejemplo n.º 5
0
void OtaUpdate() {
	uint8 slot;
	rboot_config bootconf;

	Serial.println("Updating...");

	hardwareTimer.stop();
	reportTimer.stop();

	sendToClients("Firmware ota update started...");

	// need a clean object, otherwise if run before and failed will not run again
	if (otaUpdater)
		delete otaUpdater;
	otaUpdater = new rBootHttpUpdate();

	sendToClients("Firmware ota update started...1");

	// select rom slot to flash
	bootconf = rboot_get_config();
	slot = bootconf.current_rom;
	if (slot == 0)
		slot = 1;
	else
		slot = 0;

#ifndef RBOOT_TWO_ROMS
	// flash rom to position indicated in the rBoot config rom table
	otaUpdater->addItem(bootconf.roms[slot], ROM_0_URL);
#else
	// flash appropriate rom
	if (slot == 0) {
		otaUpdater->addItem(bootconf.roms[slot], ROM_0_URL);
	} else {
		otaUpdater->addItem(bootconf.roms[slot], ROM_1_URL);
	}
#endif

#ifndef DISABLE_SPIFFS
	// use user supplied values (defaults for 4mb flash in makefile)
	if (slot == 0) {
		otaUpdater->addItem(RBOOT_SPIFFS_0, SPIFFS_URL);
	} else {
		otaUpdater->addItem(RBOOT_SPIFFS_1, SPIFFS_URL);
	}
#endif

	sendToClients("Firmware ota update started...2");
	// request switch and reboot on success
	otaUpdater->switchToRom(slot);
	// and/or set a callback (called on failure or success without switching requested)
	otaUpdater->setCallback(OtaUpdate_CallBack);

	// start update
	sendToClients("Firmware ota update started...3");
	otaUpdater->start();
}
Ejemplo n.º 6
0
void ota_update() {
	
	uint8 slot;
	rboot_config bootconf;
	
	PRINTF_INFO("Updating...\n");
	
	// need a clean object, otherwise if run before and failed will not run again
	if (otaUpdater) delete otaUpdater;
	otaUpdater = new rBootHttpUpdate();
	
	// select rom slot to flash
	bootconf = rboot_get_config();
	slot = bootconf.current_rom;
	if (slot == 0) slot = 1; else slot = 0;

#ifndef RBOOT_TWO_ROMS
	// flash rom to position indicated in the rBoot config rom table
	otaUpdater->addItem(bootconf.roms[slot], ROM_0_URL);
#else
	// flash appropriate rom
	if (slot == 0) {
		otaUpdater->addItem(bootconf.roms[slot], ROM_0_URL);
	} else {
		otaUpdater->addItem(bootconf.roms[slot], ROM_1_URL);
	}
#endif
	
#ifndef DISABLE_SPIFFS
	// use user supplied values (defaults for 4mb flash in makefile)
	if (slot == 0) {
		otaUpdater->addItem(RBOOT_SPIFFS_0, SPIFFS_URL);
	} else {
		otaUpdater->addItem(RBOOT_SPIFFS_1, SPIFFS_URL);
	}
#endif

	// request switch and reboot on success
	//otaUpdater->switchToRom(slot);
	// and/or set a callback (called on failure or success without switching requested)
	otaUpdater->setCallback(ota_onUpdate);

	// start update
	otaUpdater->start();
}
Ejemplo n.º 7
0
irom static app_action_t ota_start(const string_t *src, string_t *dst, bool verify)
{
	rboot_config rcfg = rboot_get_config();

	if(string_size(&buffer_4k) < 0x1000)
	{
		string_format(dst, "OTA: string write buffer too small: %d\n", string_size(&buffer_4k));
		return(app_action_error);
	}

	if((rcfg.magic != BOOT_CONFIG_MAGIC) || (rcfg.count != 2) || (rcfg.current_rom > 1))
	{
		string_cat(dst, "OTA: rboot config invalid\n");
		return(app_action_error);
	}

	if(parse_int(1, src, &remote_file_length, 0) != parse_ok)
	{
		string_cat(dst, "OTA: invalid/missing file length\n");
		return(app_action_error);
	}

	if(wlan_scan_active())
	{
		string_cat(dst, "OTA: wlan scan active\n");
		return(app_action_error);
	}

	ota_state = verify ? state_verify : state_write;

	flash_slot = rcfg.current_rom == 0 ? 1 : 0;
	flash_sector = rcfg.roms[flash_slot] / 0x1000;

	received = 0;
	written = 0;
	skipped = 0;

	string_clear(&buffer_4k);
	string_crc32_init();
	MD5Init(&md5);

	string_format(dst, "%s %d %d\n", verify ? "VERIFY" : "WRITE", flash_slot, flash_sector);
	return(app_action_normal);
}
Ejemplo n.º 8
0
void user_init(void)
{
    uart_set_baud(0, 115200);

    midea_ir_init(&ir, 14);
    config_init();

    rboot_config conf = rboot_get_config();
    printf("Currently running on flash slot %d / %d\n",
           conf.current_rom, conf.count);

    printf("Image addresses in flash:\n");
    for(int i = 0; i <conf.count; i++) {
        printf("%c%d: offset 0x%08x\n", i == conf.current_rom ? '*':' ', i,
                conf.roms[i]);
    }
    start_config_server();

    xTaskCreate(main_task, (signed char *)"main", 512, NULL, 4, NULL);
    /* xTaskCreate(test_task, (signed char *)"test", 512, NULL, 2, NULL); */

    ota_tftp_init_server(TFTP_PORT);
}
Ejemplo n.º 9
0
// start the ota process, with user supplied options
bool ICACHE_FLASH_ATTR rboot_ota_start(ota_callback callback) {

	uint8 slot;
	rboot_config bootconf;
	err_t result;

	// check not already updating
	if (system_upgrade_flag_check() == UPGRADE_FLAG_START) {
		return false;
	}

	// create upgrade status structure
	upgrade = (upgrade_status*)os_zalloc(sizeof(upgrade_status));
	if (!upgrade) {
		CHATFABRIC_DEBUG(_GLOBAL_DEBUG, "No ram!\r\n");
		return false;
	}

	// store the callback
	upgrade->callback = callback;

	// get details of rom slot to update
	bootconf = rboot_get_config();
	slot = bootconf.current_rom;
	if (slot == 0) slot = 1; else slot = 0;
	upgrade->rom_slot = slot;

	// flash to rom slot
	upgrade->write_status = rboot_write_init(bootconf.roms[upgrade->rom_slot]);
	// to flash a file (e.g. containing a filesystem) to an arbitrary location
	// (e.g. 0x40000 bytes after the start of the rom) use code this like instead:
	// Note: address must be start of a sector (multiple of 4k)!
	//upgrade->write_status = rboot_write_init(bootconf.roms[upgrade->rom_slot] + 0x40000);
	//upgrade->rom_slot = FLASH_BY_ADDR;

	// create connection
	upgrade->conn = (struct espconn *)os_zalloc(sizeof(struct espconn));
	if (!upgrade->conn) {
		CHATFABRIC_DEBUG(_GLOBAL_DEBUG, "No ram!\r\n");
		os_free(upgrade);
		return false;
	}
	upgrade->conn->proto.tcp = (esp_tcp *)os_zalloc(sizeof(esp_tcp));
	if (!upgrade->conn->proto.tcp) {
		CHATFABRIC_DEBUG(_GLOBAL_DEBUG, "No ram!\r\n");
		os_free(upgrade->conn);
		os_free(upgrade);
		return false;
	}

	// set update flag
	system_upgrade_flag_set(UPGRADE_FLAG_START);

	// dns lookup
	result = espconn_gethostbyname(upgrade->conn, OTA_HOST, &upgrade->ip, upgrade_resolved);
	if (result == ESPCONN_OK) {
		// hostname is already cached or is actually a dotted decimal ip address
		upgrade_resolved(0, &upgrade->ip, upgrade->conn);
	} else if (result == ESPCONN_INPROGRESS) {
		// lookup taking place, will call upgrade_resolved on completion
	} else {
		CHATFABRIC_DEBUG(_GLOBAL_DEBUG, "DNS error!\r\n");
		os_free(upgrade->conn->proto.tcp);
		os_free(upgrade->conn);
		os_free(upgrade);
		return false;
	}

	return true;
}
Ejemplo n.º 10
0
// get current boot rom
uint8 ICACHE_FLASH_ATTR rboot_get_current_rom(void) {
	rboot_config conf;
	conf = rboot_get_config();
	return conf.current_rom;
}
Ejemplo n.º 11
0
uint32_t rboot_get_slot_offset(uint8_t slot) {
    rboot_config conf;
    conf = rboot_get_config();
    if (slot >= conf.count) return (uint32_t)-1;
    return conf.roms[slot];
}