Ejemplos de rcc_clock_setup_in_hsi_out_24mhz en C++ (Cpp)

Ejemplo n.º 1

Archivo: main_f1.c Proyecto: 3yc/PX4Bootloader

int
main(void)
{
	unsigned timeout = 0;

	/* do board-specific initialisation */
	board_init();

#ifdef INTERFACE_USART
	/* XXX sniff for a USART connection to decide whether to wait in the bootloader? */
	timeout = BOOTLOADER_DELAY;
#endif

#ifdef INTERFACE_I2C
# error I2C bootloader detection logic not implemented
#endif

	/* if the app left a cookie saying we should wait, then wait */
	if (should_wait())
		timeout = BOOTLOADER_DELAY;

#ifdef BOARD_FORCE_BL_PIN
	/* if the force-BL pin state matches the state of the pin, wait in the bootloader forever */
	if (BOARD_FORCE_BL_VALUE == gpio_get(BOARD_FORCE_BL_PORT, BOARD_FORCE_BL_PIN))
		timeout = 0xffffffff;
#endif

	/* look for the magic wait-in-bootloader value in backup register zero */


	/* if we aren't expected to wait in the bootloader, try to boot immediately */
	if (timeout == 0) {
		/* try to boot immediately */
		jump_to_app();

		/* if we returned, there is no app; go to the bootloader and stay there */
		timeout = 0;
	}

	/* configure the clock for bootloader activity */
	rcc_clock_setup_in_hsi_out_24mhz();

	/* start the interface */
	cinit(BOARD_INTERFACE_CONFIG);

	while (1)
	{
		/* run the bootloader, possibly coming back after the timeout */
		bootloader(timeout);

		/* look to see if we can boot the app */
		jump_to_app();

		/* boot failed; stay in the bootloader forever next time */
		timeout = 0;
	}
}

Ejemplo n.º 2

Archivo: adc-dac-printf.c Proyecto: paulfertser/libopencm3-examples

static void clock_setup(void)
{
    rcc_clock_setup_in_hsi_out_24mhz();
    /* Enable clocks for USART2 and DAC*/
    rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
    rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_DACEN);

    /* and the ADC and IO ports */
    rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
    rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);
    rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_ADC1EN);
}

Ejemplo n.º 3

Archivo: adc-dac-printf.c Proyecto: ChuckM/libopencm3-examples

static void clock_setup(void)
{
	rcc_clock_setup_in_hsi_out_24mhz();
	/* Enable clocks for USART2 and DAC*/
	rcc_periph_clock_enable(RCC_USART2);
	rcc_periph_clock_enable(RCC_DAC);

	/* and the ADC and IO ports */
	rcc_periph_clock_enable(RCC_GPIOA);
	rcc_periph_clock_enable(RCC_GPIOC);
	rcc_periph_clock_enable(RCC_ADC1);
}

Ejemplo n.º 4

Archivo: boxcar.c Proyecto: karlp/karlnet

void clock_setup(void)
{
	rcc_clock_setup_in_hsi_out_24mhz();
	/* Lots of things on all ports... */
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPBEN);
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);

	rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_USART2EN);
	// oh, and dma!
	rcc_peripheral_enable_clock(&RCC_AHBENR, RCC_AHBENR_DMA1EN);
	// and timers...
	rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_TIM7EN);
	// and spi for the radio
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_SPI1EN);
	/* Enable AFIO clock. */
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN);
	/* ADC is also helpful */
	rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_ADC1EN);
}