Ejemplos de read_attr_speed en C++ (Cpp)

Ejemplo n.º 1

Archivo: usbip_common.c Proyecto: AlexShiLucky/linux

int read_usb_device(struct udev_device *sdev, struct usbip_usb_device *udev)
{
	uint32_t busnum, devnum;
	const char *path, *name;

	READ_ATTR(udev, uint8_t,  sdev, bDeviceClass,		"%02x\n");
	READ_ATTR(udev, uint8_t,  sdev, bDeviceSubClass,	"%02x\n");
	READ_ATTR(udev, uint8_t,  sdev, bDeviceProtocol,	"%02x\n");

	READ_ATTR(udev, uint16_t, sdev, idVendor,		"%04x\n");
	READ_ATTR(udev, uint16_t, sdev, idProduct,		"%04x\n");
	READ_ATTR(udev, uint16_t, sdev, bcdDevice,		"%04x\n");

	READ_ATTR(udev, uint8_t,  sdev, bConfigurationValue,	"%02x\n");
	READ_ATTR(udev, uint8_t,  sdev, bNumConfigurations,	"%02x\n");
	READ_ATTR(udev, uint8_t,  sdev, bNumInterfaces,		"%02x\n");

	READ_ATTR(udev, uint8_t,  sdev, devnum,			"%d\n");
	udev->speed = read_attr_speed(sdev);

	path = udev_device_get_syspath(sdev);
	name = udev_device_get_sysname(sdev);

	strncpy(udev->path,  path,  SYSFS_PATH_MAX);
	strncpy(udev->busid, name, SYSFS_BUS_ID_SIZE);

	sscanf(name, "%u-%u", &busnum, &devnum);
	udev->busnum = busnum;

	return 0;
}

Ejemplo n.º 2

Archivo: usbip_common.c Proyecto: vilpalu/GPL_2.6.31

int read_usb_device(struct sysfs_device *sdev, struct usb_device *udev)
{
	uint32_t busnum, devnum;

	READ_ATTR(udev, uint8_t,  sdev, bDeviceClass,		"%02x\n");
	READ_ATTR(udev, uint8_t,  sdev, bDeviceSubClass,	"%02x\n");
	READ_ATTR(udev, uint8_t,  sdev, bDeviceProtocol,	"%02x\n");

	READ_ATTR(udev, uint16_t, sdev, idVendor,		"%04x\n");
	READ_ATTR(udev, uint16_t, sdev, idProduct,		"%04x\n");
	READ_ATTR(udev, uint16_t, sdev, bcdDevice,		"%04x\n");

	READ_ATTR(udev, uint8_t,  sdev, bConfigurationValue,	"%02x\n");
	READ_ATTR(udev, uint8_t,  sdev, bNumConfigurations,	"%02x\n");
	READ_ATTR(udev, uint8_t,  sdev, bNumInterfaces,		"%02x\n");

	READ_ATTR(udev, uint8_t,  sdev, devnum,			"%d\n");
	udev->speed = read_attr_speed(sdev);

#if CLIENT > 2	
	// added by zl 2011-2-12 
	read_attr_string(sdev, udev->product, to_string(product)); // product
	read_attr_string(sdev, udev->manufacturer, to_string(manufacturer)); // manufacturer
	read_attr_string(sdev, udev->serial, to_string(serial)); // serialNumber
	// end----added
#endif

	strncpy(udev->path,  sdev->path,  SYSFS_PATH_MAX);
	strncpy(udev->busid, sdev->name, SYSFS_BUS_ID_SIZE);

	sscanf(sdev->name, "%u-%u", &busnum, &devnum);
	udev->busnum = busnum;

	return 0;
}