ClientEditor::ClientEditor( QWidget *parent )
: KDialog( parent )
{
ui = new ClientEditorUI( this );
setMainWidget( ui );
setCaption( i18n("Client Editor") );
setButtons( KDialog::Ok|KDialog::Cancel );
setDefaultButton(KDialog::NoDefault); //disable default button (return Pressed)
enableButton(KDialog::Ok, false);
connect( ui->btnChangeClientPhoto , SIGNAL( clicked() ), this, SLOT( changePhoto() ) );
connect( ui->editClientName, SIGNAL(textEdited(const QString &)),this, SLOT( checkNameDelayed()) );
connect(ui->editClientCode, SIGNAL(returnPressed()),ui->editClientName, SLOT(setFocus()) );
connect(ui->editClientCode, SIGNAL(editingFinished()),this, SLOT( checkNameDelayed() )); //both returnPressed and lost focus fires this signal. But only fired if validator is accepted.
QRegExp regexpC("[0-9]{1,13}");
QRegExpValidator * validator = new QRegExpValidator(regexpC, this);
ui->editClientPoints->setValidator(validator);
ui->editClientDiscount->setValidator((new QDoubleValidator(0.00, 100.000, 3,ui->editClientDiscount)));
//code can contain letters (for ids with letters, like RFC in Mexico)
QRegExp regexpName("[A-Za-z_0-9\\s\\\\/\\-]+");//any letter, number, both slashes, dash and lower dash. and any space
QRegExpValidator *regexpAlpha = new QRegExpValidator(regexpName, this);
ui->editClientCode->setValidator(regexpAlpha);
//Set filter to the name. Do not allow .,&^% etc...
ui->editClientName->setValidator(regexpAlpha);
ui->editClientCode->setEmptyMessage(i18n("Enter a 6, 12, or 13 digits Bar Code."));
ui->editClientName->setEmptyMessage(i18n("Enter client full name"));
ui->editClientPhone->setEmptyMessage(i18n("Phone number"));
ui->editClientCell->setEmptyMessage(i18n("Cell phone number"));
ui->editClientPoints->setEmptyMessage(i18n("Accumulated points"));
ui->editClientDiscount->setEmptyMessage(i18n("Personal discount"));
//since date picker
ui->sinceDatePicker->setDate(QDate::currentDate());
QTimer::singleShot(750, this, SLOT(checkName()));
ui->editClientCode->setFocus();
}
void CodeBlock::dump(ExecState* exec, const Vector<Instruction>::const_iterator& begin, Vector<Instruction>::const_iterator& it) const
{
int location = it - begin;
switch (exec->machine()->getOpcodeID(it->u.opcode)) {
case op_load: {
int r0 = (++it)->u.operand;
int k0 = (++it)->u.operand;
printf("[%4d] load\t\t %s, %s\t\t\n", location, registerName(r0).c_str(), constantName(exec, k0, jsValues[k0]).c_str());
break;
}
case op_new_object: {
int r0 = (++it)->u.operand;
printf("[%4d] new_object\t %s\n", location, registerName(r0).c_str());
break;
}
case op_new_array: {
int dst = (++it)->u.operand;
int argv = (++it)->u.operand;
int argc = (++it)->u.operand;
printf("[%4d] new_array\t %s, %s, %d\n", location, registerName(dst).c_str(), registerName(argv).c_str(), argc);
break;
}
case op_new_regexp: {
int r0 = (++it)->u.operand;
int re0 = (++it)->u.operand;
printf("[%4d] new_regexp\t %s, %s\n", location, registerName(r0).c_str(), regexpName(re0, regexps[re0].get()).c_str());
break;
}
case op_mov: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
printf("[%4d] mov\t\t %s, %s\n", location, registerName(r0).c_str(), registerName(r1).c_str());
break;
}
case op_not: {
printUnaryOp(location, it, "not");
break;
}
case op_eq: {
printBinaryOp(location, it, "eq");
break;
}
case op_neq: {
printBinaryOp(location, it, "neq");
break;
}
case op_stricteq: {
printBinaryOp(location, it, "stricteq");
break;
}
case op_nstricteq: {
printBinaryOp(location, it, "nstricteq");
break;
}
case op_less: {
printBinaryOp(location, it, "less");
break;
}
case op_lesseq: {
printBinaryOp(location, it, "lesseq");
break;
}
case op_pre_inc: {
int r0 = (++it)->u.operand;
printf("[%4d] pre_inc\t\t %s\n", location, registerName(r0).c_str());
break;
}
case op_pre_dec: {
int r0 = (++it)->u.operand;
printf("[%4d] pre_dec\t\t %s\n", location, registerName(r0).c_str());
break;
}
case op_post_inc: {
printUnaryOp(location, it, "post_inc");
break;
}
case op_post_dec: {
printUnaryOp(location, it, "post_dec");
break;
}
case op_to_jsnumber: {
printUnaryOp(location, it, "to_jsnumber");
break;
}
case op_negate: {
printUnaryOp(location, it, "negate");
break;
}
case op_add: {
printBinaryOp(location, it, "add");
break;
}
case op_mul: {
printBinaryOp(location, it, "mul");
break;
}
case op_div: {
printBinaryOp(location, it, "div");
break;
}
case op_mod: {
printBinaryOp(location, it, "mod");
break;
}
case op_sub: {
printBinaryOp(location, it, "sub");
break;
}
case op_lshift: {
printBinaryOp(location, it, "lshift");
break;
}
case op_rshift: {
printBinaryOp(location, it, "rshift");
break;
}
case op_urshift: {
printBinaryOp(location, it, "urshift");
break;
}
case op_bitand: {
printBinaryOp(location, it, "bitand");
break;
}
case op_bitxor: {
printBinaryOp(location, it, "bitxor");
break;
}
case op_bitor: {
printBinaryOp(location, it, "bitor");
break;
}
case op_bitnot: {
printUnaryOp(location, it, "bitnot");
break;
}
case op_instanceof: {
printBinaryOp(location, it, "instanceof");
break;
}
case op_typeof: {
printUnaryOp(location, it, "typeof");
break;
}
case op_in: {
printBinaryOp(location, it, "in");
break;
}
case op_resolve: {
int r0 = (++it)->u.operand;
int id0 = (++it)->u.operand;
printf("[%4d] resolve\t\t %s, %s\n", location, registerName(r0).c_str(), idName(id0, identifiers[id0]).c_str());
break;
}
case op_resolve_skip: {
int r0 = (++it)->u.operand;
int id0 = (++it)->u.operand;
int skipLevels = (++it)->u.operand;
printf("[%4d] resolve_skip\t %s, %s, %d\n", location, registerName(r0).c_str(), idName(id0, identifiers[id0]).c_str(), skipLevels);
break;
}
case op_get_scoped_var: {
int r0 = (++it)->u.operand;
int index = (++it)->u.operand;
int skipLevels = (++it)->u.operand;
printf("[%4d] get_scoped_var\t\t %s, %d, %d\n", location, registerName(r0).c_str(), index, skipLevels);
break;
}
case op_put_scoped_var: {
int index = (++it)->u.operand;
int skipLevels = (++it)->u.operand;
int r0 = (++it)->u.operand;
printf("[%4d] put_scoped_var\t\t %d, %d, %s\n", location, index, skipLevels, registerName(r0).c_str());
break;
}
case op_resolve_base: {
int r0 = (++it)->u.operand;
int id0 = (++it)->u.operand;
printf("[%4d] resolve_base\t %s, %s\n", location, registerName(r0).c_str(), idName(id0, identifiers[id0]).c_str());
break;
}
case op_resolve_with_base: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int id0 = (++it)->u.operand;
printf("[%4d] resolve_with_base %s, %s, %s\n", location, registerName(r0).c_str(), registerName(r1).c_str(), idName(id0, identifiers[id0]).c_str());
break;
}
case op_resolve_func: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int id0 = (++it)->u.operand;
printf("[%4d] resolve_func\t %s, %s, %s\n", location, registerName(r0).c_str(), registerName(r1).c_str(), idName(id0, identifiers[id0]).c_str());
break;
}
case op_get_by_id: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int id0 = (++it)->u.operand;
printf("[%4d] get_by_id\t %s, %s, %s\n", location, registerName(r0).c_str(), registerName(r1).c_str(), idName(id0, identifiers[id0]).c_str());
break;
}
case op_put_by_id: {
int r0 = (++it)->u.operand;
int id0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
printf("[%4d] put_by_id\t %s, %s, %s\n", location, registerName(r0).c_str(), idName(id0, identifiers[id0]).c_str(), registerName(r1).c_str());
break;
}
case op_put_getter: {
int r0 = (++it)->u.operand;
int id0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
printf("[%4d] put_getter\t %s, %s, %s\n", location, registerName(r0).c_str(), idName(id0, identifiers[id0]).c_str(), registerName(r1).c_str());
break;
}
case op_put_setter: {
int r0 = (++it)->u.operand;
int id0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
printf("[%4d] put_setter\t %s, %s, %s\n", location, registerName(r0).c_str(), idName(id0, identifiers[id0]).c_str(), registerName(r1).c_str());
break;
}
case op_del_by_id: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int id0 = (++it)->u.operand;
printf("[%4d] del_by_id\t %s, %s, %s\n", location, registerName(r0).c_str(), registerName(r1).c_str(), idName(id0, identifiers[id0]).c_str());
break;
}
case op_get_by_val: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int r2 = (++it)->u.operand;
printf("[%4d] get_by_val\t %s, %s, %s\n", location, registerName(r0).c_str(), registerName(r1).c_str(), registerName(r2).c_str());
break;
}
case op_put_by_val: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int r2 = (++it)->u.operand;
printf("[%4d] put_by_val\t %s, %s, %s\n", location, registerName(r0).c_str(), registerName(r1).c_str(), registerName(r2).c_str());
break;
}
case op_del_by_val: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int r2 = (++it)->u.operand;
printf("[%4d] del_by_val\t %s, %s, %s\n", location, registerName(r0).c_str(), registerName(r1).c_str(), registerName(r2).c_str());
break;
}
case op_put_by_index: {
int r0 = (++it)->u.operand;
unsigned n0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
printf("[%4d] put_by_index\t %s, %u, %s\n", location, registerName(r0).c_str(), n0, registerName(r1).c_str());
break;
}
case op_jmp: {
int offset = (++it)->u.operand;
printf("[%4d] jmp\t\t %d(->%d)\n", location, offset, jumpTarget(begin, it, offset));
break;
}
case op_loop: {
int offset = (++it)->u.operand;
printf("[%4d] loop\t\t %d(->%d)\n", location, offset, jumpTarget(begin, it, offset));
break;
}
case op_jtrue: {
printConditionalJump(begin, it, location, "jtrue");
break;
}
case op_loop_if_true: {
printConditionalJump(begin, it, location, "loop_if_true");
break;
}
case op_jfalse: {
printConditionalJump(begin, it, location, "jfalse");
break;
}
case op_jless: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int offset = (++it)->u.operand;
printf("[%4d] jless\t\t %s, %s, %d(->%d)\n", location, registerName(r0).c_str(), registerName(r1).c_str(), offset, jumpTarget(begin, it, offset));
break;
}
case op_jnless: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int offset = (++it)->u.operand;
printf("[%4d] jnless\t\t %s, %s, %d(->%d)\n", location, registerName(r0).c_str(), registerName(r1).c_str(), offset, jumpTarget(begin, it, offset));
break;
}
case op_loop_if_less: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int offset = (++it)->u.operand;
printf("[%4d] loop_if_less %s, %s, %d(->%d)\n", location, registerName(r0).c_str(), registerName(r1).c_str(), offset, jumpTarget(begin, it, offset));
break;
}
case op_new_func: {
int r0 = (++it)->u.operand;
int f0 = (++it)->u.operand;
printf("[%4d] new_func\t\t %s, f%d\n", location, registerName(r0).c_str(), f0);
break;
}
case op_new_func_exp: {
int r0 = (++it)->u.operand;
int f0 = (++it)->u.operand;
printf("[%4d] new_func_exp\t %s, f%d\n", location, registerName(r0).c_str(), f0);
break;
}
case op_call: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int r2 = (++it)->u.operand;
int tempCount = (++it)->u.operand;
int argCount = (++it)->u.operand;
printf("[%4d] call\t\t %s, %s, %s, %d, %d\n", location, registerName(r0).c_str(), registerName(r1).c_str(), registerName(r2).c_str(), tempCount, argCount);
break;
}
case op_call_eval: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int r2 = (++it)->u.operand;
int tempCount = (++it)->u.operand;
int argCount = (++it)->u.operand;
printf("[%4d] call_eval\t\t %s, %s, %s, %d, %d\n", location, registerName(r0).c_str(), registerName(r1).c_str(), registerName(r2).c_str(), tempCount, argCount);
break;
}
case op_ret: {
int r0 = (++it)->u.operand;
printf("[%4d] ret\t\t %s\n", location, registerName(r0).c_str());
break;
}
case op_construct: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
int tempCount = (++it)->u.operand;
int argCount = (++it)->u.operand;
printf("[%4d] construct\t %s, %s, %d, %d\n", location, registerName(r0).c_str(), registerName(r1).c_str(), tempCount, argCount);
break;
}
case op_get_pnames: {
int r0 = (++it)->u.operand;
int r1 = (++it)->u.operand;
printf("[%4d] get_pnames\t %s, %s\n", location, registerName(r0).c_str(), registerName(r1).c_str());
break;
}
case op_next_pname: {
int dest = (++it)->u.operand;
int iter = (++it)->u.operand;
int offset = (++it)->u.operand;
printf("[%4d] next_pname\t %s, %s, %d(->%d)\n", location, registerName(dest).c_str(), registerName(iter).c_str(), offset, jumpTarget(begin, it, offset));
break;
}
case op_push_scope: {
int r0 = (++it)->u.operand;
printf("[%4d] push_scope\t %s\n", location, registerName(r0).c_str());
break;
}
case op_pop_scope: {
printf("[%4d] pop_scope\n", location);
break;
}
case op_jmp_scopes: {
int scopeDelta = (++it)->u.operand;
int offset = (++it)->u.operand;
printf("[%4d] jmp_scopes\t^%d, %d(->%d)\n", location, scopeDelta, offset, jumpTarget(begin, it, offset));
break;
}
case op_catch: {
int r0 = (++it)->u.operand;
printf("[%4d] catch\t\t %s\n", location, registerName(r0).c_str());
break;
}
case op_throw: {
int r0 = (++it)->u.operand;
printf("[%4d] throw\t\t %s\n", location, registerName(r0).c_str());
break;
}
case op_new_error: {
int r0 = (++it)->u.operand;
int errorType = (++it)->u.operand;
int k0 = (++it)->u.operand;
printf("[%4d] new_error\t %s, %d, %s\n", location, registerName(r0).c_str(), errorType, constantName(exec, k0, jsValues[k0]).c_str());
break;
}
case op_jsr: {
int retAddrDst = (++it)->u.operand;
int offset = (++it)->u.operand;
printf("[%4d] jsr\t\t %s, %d(->%d)\n", location, registerName(retAddrDst).c_str(), offset, jumpTarget(begin, it, offset));
break;
}
case op_sret: {
int retAddrSrc = (++it)->u.operand;
printf("[%4d] sret\t\t %s\n", location, registerName(retAddrSrc).c_str());
break;
}
case op_debug: {
int debugHookID = (++it)->u.operand;
int firstLine = (++it)->u.operand;
int lastLine = (++it)->u.operand;
printf("[%4d] debug\t\t %s, %d, %d\n", location, debugHookName(debugHookID), firstLine, lastLine);
break;
}
case op_end: {
int r0 = (++it)->u.operand;
printf("[%4d] end\t\t %s\n", location, registerName(r0).c_str());
break;
}
default: {
ASSERT_NOT_REACHED();
break;
}
}
}
