MotorDirection StepperMotor::resolveDirection(MotorDirection dir) {
if (m_reverseDirection) {
return reverseDirection(dir);
}
else {
return dir;
}
}
void CEnemy::changeState(EnemyState newState)
{
// reversing direction if we were not frightened or inactive
if (_state != EnemyStateFrighten && _state != EnemyStateNone) {
reverseDirection();
}
_state = newState;
}
GameState& GameState::undo(Direction direction)
{
lastMoveCode_ = -1;
if(!canRebound() && !isBlocked())
{
if(currentPlayer_ == PLAYER_1)
--turnNumber_;
currentPlayer_ = otherPlayer(currentPlayer_);
}
direction = reverseDirection(direction);
getField_(currentPosition_).setOccupied_(direction, false);
currentPosition_ = currentPosition_.getNeighbor(direction);
getField_(currentPosition_).setOccupied_(reverseDirection(direction), false);
--moveNumber_;
return *this;
}
GameState& GameState::move(Direction direction)
{
lastMoveCode_ = getMoveCode(direction);
getField_(currentPosition_).setOccupied_(direction);
currentPosition_ = currentPosition_.getNeighbor(direction);
getField_(currentPosition_).setOccupied_(reverseDirection(direction));
if(!canRebound() && !isBlocked())
{
currentPlayer_ = otherPlayer(currentPlayer_);
if(currentPlayer_ == PLAYER_1)
++turnNumber_;
}
++moveNumber_;
return *this;
}
int main(void)
{
int n;
printf("How many vertices you want to take?");
scanf("%d",&n);
initialize(n);
insertEdges(n);
DFS(n);
sortVertices(n);
checker = 1;
initialize(n);
reverseDirection(n);
for(int i = 1; i <= n; i++)
{
int v = s_vertices[i];
if(color[v] == 0)
{
c = 0;
DFS_Visit(n, v);
for(int j = 1; j <= c; j++)
{
if(j == 1)
{
printf("%d ", ver[j]);
}
else{
printf(", %d",ver[j]);
}
}
printf("\n");
}
}
return 0;
}
void Ghost::setState(int state)
{
if(m_state != state)
reverseDirection();
m_state = state;
}
int getReverseTag(int neighbor) {
return tags[reverseDirection(localRank, neighbor)];
}
Path_element* findShortestPath(int start_x, int start_y, int facing_direction, int destination_x, int destination_y) {
// Check wether the destination and start arent the same
if (start_x == destination_x && start_y == destination_y) return NULL;
// Initiate the node element, the start and destination and the path
Node *node = malloc(sizeof (Node)), *start = malloc(sizeof (Node)), *destination = malloc(sizeof (Node));
Path_element *path = NULL;
// Find initial 'parent location'
int parent_location = reverseDirection(facing_direction);
// Clears the grid cache to prevent incorrect results
clearGridCache();
// Link start and destination to the grid consequently
start = grid[start_x][start_y];
destination = grid[destination_x][destination_y];
// Add start to open list
addToList(&list_open, start);
do {
// Find the node with the best score in the open list
node = findLowestFInList(list_open);
// Remove the node from the open list
removeFromList(&list_open, node);
// Add the node to the closed list
addToList(&list_closed, node);
// Find the parent location
if (node->parent) parent_location = getParentLocation(node);
// Process the neighbours
processNeighbour(node->south, node, determineStepWeight(SOUTH, parent_location), destination->position);
processNeighbour(node->north, node, determineStepWeight(NORTH, parent_location), destination->position);
processNeighbour(node->east, node, determineStepWeight(EAST, parent_location), destination->position);
processNeighbour(node->west, node, determineStepWeight(WEST, parent_location), destination->position);
// Do this while the destination is not in the closed list, in which case the path has been found, or the open list is empty
} while (!inList(list_closed, destination) && list_open != NULL);
// Check if best path is found, in which case the destination is in the closed list
if (inList(list_closed, destination)) {
// Add destination to path
node = destination;
addToBeginOfPath(&path, node->position.x, node->position.y, reverseDirection(getParentLocation(node)), node->step_weight, node->id);
do {
// Get the parent of the node, doing this enough times will eventually get you to the start
node = node->parent;
// Add node to path
addToBeginOfPath(
&path,
node->position.x, node->position.y,
!getParentLocation(node) ? facing_direction : reverseDirection(getParentLocation(node)),
node->step_weight,
node->id
);
} while (node != start);
}
// Clear the lists
clearList(&list_closed);
clearList(&list_open);
// Return the path
return path;
}
void
DriverThread::operateHardware()
{
// temp data structures.
hydrointerfaces::SegwayRmp::Data data;
hydrointerfaces::SegwayRmp::Command command(0,0);
// monitor the speed set-point, don't allow it to change faster than the acceleration limits
// (initialises to zero speed)
SpeedSetPoint speedSetPoint( config_.maxForwardAcceleration,
config_.maxReverseAcceleration );
// initialise stall sensor
StallSensor stallSensor( config_.stallSensorConfig );
StallType stallType;
// clear any pending commands
commandStore_.set( command );
gbxiceutilacfr::Timer newCommandTimer;
//
// The big loop (we exit immediately on detecting a fault)
//
while ( !isStopping() )
{
speedSetPoint.evaluateDt();
if ( stateMachine_.isFault() )
{
// Can't operate in a fault condition.
break;
}
//
// Read from the hardware
//
try {
segwayRmp_.read( data );
if ( config_.driveInReverse ) reverseDirection( data );
// Let the higher-ups know
stallType = stallSensor.isStalled(data);
callback_.receiveData( data, stallType );
// Check for warnings/faults
if ( data.hasFaults ||
(stallType != NoStall) )
{
stringstream ssFault;
if ( data.hasFaults )
{
ssFault << data.warnFaultReason << "\n";
}
if ( stallType != NoStall )
{
ssFault << stallString( data, stallType );
}
health().fault( ssFault.str() );
if ( data.hasFaults )
{
stateMachine_.setFault( ssFault.str() );
break;
}
}
else if ( data.hasWarnings )
{
stateMachine_.setWarning( data.warnFaultReason );
health().warning( data.warnFaultReason );
}
else
{
stateMachine_.setOK();
health().ok();
}
}
catch ( ... ) {
string problem = hydroiceutil::catchExceptionsWithStatus( "reading from hardware", health() );
stateMachine_.setFault( problem );
break;
}
//
// Write pending commands to the hardware
//
// Have we got a new command?
bool gotNewCommand = false;
if ( commandStore_.isNewData() )
{
gotNewCommand = true;
commandStore_.get( command );
speedSetPoint.set( command.vx );
newCommandTimer.restart();
}
// Are we still trying to hit our set-point?
bool setPointAlreadyReached = false;
command.vx = speedSetPoint.currentCmdSpeed( setPointAlreadyReached );
// Write if we're supposed to
if ( gotNewCommand || !setPointAlreadyReached )
{
if ( config_.driveInReverse ) reverseDirection( command );
try {
// Probably better not to have this (mutex-locking)
// statement in the middle of this very tight loop...
//
//stringstream ss;
//ss << "DriverThread::"<<__func__<<"(): writing command: " << command.toString();
//tracer_.debug( ss.str(), 2 );
segwayRmp_.write( command );
}
catch ( ... ) {
string problem = hydroiceutil::catchExceptionsWithStatus( "writing to hardware", health() );
stateMachine_.setFault( problem );
break;
}
}
// Check for timeouts in receiving commands
if ( newCommandTimer.elapsedSec() > 0.2 )
{
if ( command.vx != 0 || command.w != 0 )
{
tracer_.info( "newCommandTimer timed out, resetting desired speed to zero" );
command = hydrointerfaces::SegwayRmp::Command(0,0);
commandStore_.set(command);
newCommandTimer.restart();
}
}
}
std::string faultReason;
if ( stateMachine_.isFault(faultReason) )
{
health().fault( faultReason );
// pause in case of persistent fault
sleep(1);
}
}
void Slicer::slicing(QList<Triangle3D> *model)
{
int n = 0;
// qDebug() << "Start Slicing\n";
if(drawOutline)
{
if(!outsideOutline && !insideOutline)
{
QMessageBox::about(0, "Ошибка", "Укажите параметр внешней обводки");
return;
}
}
double currHeight = 0.0;
while(currHeight <= height)
{
slice_byLine->clear();
/*
qDebug() << "Slice at " << currHeight << height << ":\n";
qDebug() << "size(slice)" << slice->size() * sizeof(Point2D);
qDebug() << "size(slice_byLine)" << slice_byLine->size() * sizeof(Line2D);
qDebug() << "size(points)" << points->size() * sizeof(Point2D);
qDebug() << "size(one_level)" << one_level->size() * sizeof(poid);
qDebug() << "size(model)" << model->size() * sizeof(Triangle3D);*/
GCodeOutStream << "Slice at " << currHeight << ":\r\n";
for(int i = 0; i < model->size(); i++)
{
points->clear();
if(points->isEmpty())
{
solveRelation(model->at(i).vertexes_p1, model->at(i).vertexes_p2, currHeight);
solveRelation(model->at(i).vertexes_p2, model->at(i).vertexes_p3, currHeight);
solveRelation(model->at(i).vertexes_p3, model->at(i).vertexes_p1, currHeight);
if(points->size() == 2)
{
Line2D line(points->at(0), points->at(1));
*slice_byLine += line;
}
}
else
{
qDebug() << "********";
}
}
if(slice_byLine->isEmpty())
{
break;
}
removeEqual();
removeRepeated();
removeReverseRepeated();
while(!slice_byLine->isEmpty())
{
// qDebug() << "1";
start = findMin();
slice->clear();
buildOrder();
if(!slice->at(0).isBiggerCorner(slice->at(slice->size() - 1)))
{
reverseDirection();
}
// qDebug() << "size slice =" << sizeof(slice);
if(slice->size() > 1)
{
if(drawOutline)
{
if(insideOutline)
{
GCodeOutStream << "\tOutline shading - inside option:\r\n";
edgeShading(lineWidth, true, currHeight, impulse);
}
else if(outsideOutline)
{
GCodeOutStream << "\tOutline shading - outside option:\r\n";
edgeShading(lineWidth, false, currHeight, impulse);
}
}
}
if(slice->size() > 2)
{
if(drawInline)
{
GCodeOutStream << "\tInner shading:\r\n";
maxY = findMaxY();
innerShading(currHeight, impulse, scale);
}
}
}
currHeight += step_Z;
}
GCodeOut.close();
QMessageBox::about(0, "Прогресс", "Печать прошла успешно!");
}