/*
* Do what we need to do when inserting a route.
*/
static struct radix_node *
in6_addroute(void *v_arg, void *n_arg, struct radix_node_head *head,
struct radix_node *treenodes)
{
struct rtentry *rt = (struct rtentry *)treenodes;
struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)rt_key(rt);
struct radix_node *ret;
lck_mtx_assert(rnh_lock, LCK_MTX_ASSERT_OWNED);
RT_LOCK_ASSERT_HELD(rt);
/*
* If this is a dynamic route (which is created via Redirect) and
* we already have the maximum acceptable number of such route entries,
* reject creating a new one. We could initiate garbage collection to
* make available space right now, but the benefit would probably not
* be worth the cleaning overhead; we only have to endure a slightly
* suboptimal path even without the redirecbted route.
*/
if ((rt->rt_flags & RTF_DYNAMIC) != 0 &&
ip6_maxdynroutes >= 0 && in6dynroutes >= ip6_maxdynroutes)
return (NULL);
/*
* For IPv6, all unicast non-host routes are automatically cloning.
*/
if (IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr))
rt->rt_flags |= RTF_MULTICAST;
if (!(rt->rt_flags & (RTF_HOST | RTF_CLONING | RTF_MULTICAST))) {
rt->rt_flags |= RTF_PRCLONING;
}
/*
* A little bit of help for both IPv6 output and input:
* For local addresses, we make sure that RTF_LOCAL is set,
* with the thought that this might one day be used to speed up
* ip_input().
*
* We also mark routes to multicast addresses as such, because
* it's easy to do and might be useful (but this is much more
* dubious since it's so easy to inspect the address). (This
* is done above.)
*
* XXX
* should elaborate the code.
*/
if (rt->rt_flags & RTF_HOST) {
if (IN6_ARE_ADDR_EQUAL(&satosin6(rt->rt_ifa->ifa_addr)
->sin6_addr,
&sin6->sin6_addr)) {
rt->rt_flags |= RTF_LOCAL;
}
}
if (!rt->rt_rmx.rmx_mtu && !(rt->rt_rmx.rmx_locks & RTV_MTU)
&& rt->rt_ifp)
rt->rt_rmx.rmx_mtu = rt->rt_ifp->if_mtu;
ret = rn_addroute(v_arg, n_arg, head, treenodes);
if (ret == NULL && (rt->rt_flags & RTF_HOST)) {
struct rtentry *rt2;
/*
* We are trying to add a host route, but can't.
* Find out if it is because of an
* ARP entry and delete it if so.
*/
rt2 = rtalloc1_locked((struct sockaddr *)sin6, 0,
RTF_CLONING | RTF_PRCLONING);
if (rt2) {
RT_LOCK(rt2);
if ((rt2->rt_flags & RTF_LLINFO) &&
(rt2->rt_flags & RTF_HOST) &&
rt2->rt_gateway != NULL &&
rt2->rt_gateway->sa_family == AF_LINK) {
/*
* Safe to drop rt_lock and use rt_key,
* rt_gateway, since holding rnh_lock here
* prevents another thread from calling
* rt_setgate() on this route.
*/
RT_UNLOCK(rt2);
(void) rtrequest_locked(RTM_DELETE, rt_key(rt2),
rt2->rt_gateway, rt_mask(rt2),
rt2->rt_flags, 0);
ret = rn_addroute(v_arg, n_arg, head,
treenodes);
} else {
RT_UNLOCK(rt2);
}
rtfree_locked(rt2);
}
} else if (ret == NULL && (rt->rt_flags & RTF_CLONING)) {
struct rtentry *rt2;
/*
* We are trying to add a net route, but can't.
* The following case should be allowed, so we'll make a
* special check for this:
* Two IPv6 addresses with the same prefix is assigned
* to a single interrface.
* # ifconfig if0 inet6 3ffe:0501::1 prefix 64 alias (*1)
* # ifconfig if0 inet6 3ffe:0501::2 prefix 64 alias (*2)
* In this case, (*1) and (*2) want to add the same
* net route entry, 3ffe:0501:: -> if0.
* This case should not raise an error.
*/
rt2 = rtalloc1_locked((struct sockaddr *)sin6, 0,
RTF_CLONING | RTF_PRCLONING);
if (rt2) {
RT_LOCK(rt2);
if ((rt2->rt_flags & (RTF_CLONING|RTF_HOST|RTF_GATEWAY))
== RTF_CLONING
&& rt2->rt_gateway
&& rt2->rt_gateway->sa_family == AF_LINK
&& rt2->rt_ifp == rt->rt_ifp) {
ret = rt2->rt_nodes;
}
RT_UNLOCK(rt2);
rtfree_locked(rt2);
}
}
if (ret != NULL && (rt->rt_flags & RTF_DYNAMIC) != 0)
in6dynroutes++;
return ret;
}
/*
* Do what we need to do when inserting a route.
*/
static struct radix_node *
in_addroute(void *v_arg, void *n_arg, struct radix_node_head *head,
struct radix_node *treenodes)
{
struct rtentry *rt = (struct rtentry *)treenodes;
struct sockaddr_in *sin = (struct sockaddr_in *)rt_key(rt);
struct radix_node *ret;
/*
* For IP, all unicast non-host routes are automatically cloning.
*/
if(IN_MULTICAST(ntohl(sin->sin_addr.s_addr)))
rt->rt_flags |= RTF_MULTICAST;
if(!(rt->rt_flags & (RTF_HOST | RTF_CLONING | RTF_MULTICAST))) {
rt->rt_flags |= RTF_PRCLONING;
}
/*
* A little bit of help for both IP output and input:
* For host routes, we make sure that RTF_BROADCAST
* is set for anything that looks like a broadcast address.
* This way, we can avoid an expensive call to in_broadcast()
* in ip_output() most of the time (because the route passed
* to ip_output() is almost always a host route).
*
* We also do the same for local addresses, with the thought
* that this might one day be used to speed up ip_input().
*
* We also mark routes to multicast addresses as such, because
* it's easy to do and might be useful (but this is much more
* dubious since it's so easy to inspect the address). (This
* is done above.)
*/
if (rt->rt_flags & RTF_HOST) {
if (in_broadcast(sin->sin_addr, rt->rt_ifp)) {
rt->rt_flags |= RTF_BROADCAST;
} else {
#define satosin(sa) ((struct sockaddr_in *)sa)
if (satosin(rt->rt_ifa->ifa_addr)->sin_addr.s_addr
== sin->sin_addr.s_addr)
rt->rt_flags |= RTF_LOCAL;
#undef satosin
}
}
if (!rt->rt_rmx.rmx_mtu && !(rt->rt_rmx.rmx_locks & RTV_MTU)
&& rt->rt_ifp)
rt->rt_rmx.rmx_mtu = rt->rt_ifp->if_mtu;
ret = rn_addroute(v_arg, n_arg, head, treenodes);
if (ret == NULL && rt->rt_flags & RTF_HOST) {
struct rtentry *rt2;
/*
* We are trying to add a host route, but can't.
* Find out if it is because of an
* ARP entry and delete it if so.
*/
rt2 = rtalloc1_locked((struct sockaddr *)sin, 0,
RTF_CLONING | RTF_PRCLONING);
if (rt2) {
if (rt2->rt_flags & RTF_LLINFO &&
rt2->rt_flags & RTF_HOST &&
rt2->rt_gateway &&
rt2->rt_gateway->sa_family == AF_LINK) {
rtrequest_locked(RTM_DELETE,
(struct sockaddr *)rt_key(rt2),
rt2->rt_gateway,
rt_mask(rt2), rt2->rt_flags, 0);
ret = rn_addroute(v_arg, n_arg, head,
treenodes);
}
rtfree_locked(rt2);
}
}
return ret;
}
