/* Function Name:
* rtl8367c_setAsicRmaLldp
* Description:
* Set LLDP for CPU trapping
* Input:
* pRmacfg - type of RMA for trapping frame type setting
* Output:
* None
* Return:
* RT_ERR_OK - Success
* RT_ERR_SMI - SMI access error
* RT_ERR_RMA_ADDR - Invalid RMA address index
* Note:
* None
*/
ret_t rtl8367c_setAsicRmaLldp(rtk_uint32 enabled, rtl8367c_rma_t* pRmacfg)
{
rtk_uint32 regData;
ret_t retVal;
if(enabled > 1)
return RT_ERR_ENABLE;
if(pRmacfg->operation >= RMAOP_END)
return RT_ERR_RMA_ACTION;
if(pRmacfg->trap_priority > RTL8367C_PRIMAX)
return RT_ERR_QOS_INT_PRIORITY;
retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_RMA_LLDP_EN, RTL8367C_RMA_LLDP_EN_OFFSET,enabled);
if(retVal != RT_ERR_OK)
return retVal;
regData = *(rtk_uint16*)pRmacfg;
retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_RMA_CTRL00, RTL8367C_TRAP_PRIORITY_MASK, pRmacfg->trap_priority);
if(retVal != RT_ERR_OK)
return retVal;
return rtl8367c_setAsicReg(RTL8367C_REG_RMA_CTRL_LLDP, regData);
}
/* Function Name:
* rtl8367c_setAsicGreenHighPriorityTraffic
* Description:
* Set indicator which ASIC had received high priority traffic
* Input:
* port - Physical port number (0~7)
* Output:
* None
* Return:
* RT_ERR_OK - Success
* RT_ERR_SMI - SMI access error
* RT_ERR_PORT_ID - Invalid port number
* Note:
* None
*/
ret_t rtl8367c_setAsicGreenHighPriorityTraffic(rtk_uint32 port)
{
if(port > RTL8367C_PORTIDMAX)
return RT_ERR_PORT_ID;
return rtl8367c_setAsicRegBit(RTL8367C_REG_HIGHPRI_INDICATOR, port, 1);
}
/* Function Name:
* rtl8367c_setAsicLutCamTbUsage
* Description:
* Configure Lut CAM table usage
* Input:
* enabled - L2 CAM table usage 1: enabled, 0: disabled
* Output:
* None
* Return:
* RT_ERR_OK - Success
* RT_ERR_SMI - SMI access error
* Note:
* None
*/
ret_t rtl8367c_setAsicLutCamTbUsage(rtk_uint32 enabled)
{
ret_t retVal;
retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_LUT_CFG, RTL8367C_BCAM_DISABLE_OFFSET, enabled ? 0 : 1);
return retVal;
}
/* Function Name:
* rtl8367c_setAsicGreenTrafficType
* Description:
* Set traffic type for each priority
* Input:
* priority - internal priority (0~7)
* traffictype - high/low traffic type, 1:high priority traffic type, 0:low priority traffic type
* Output:
* None
* Return:
* RT_ERR_OK - Success
* RT_ERR_SMI - SMI access error
* RT_ERR_QOS_INT_PRIORITY - Invalid priority
* Note:
* None
*/
ret_t rtl8367c_setAsicGreenTrafficType(rtk_uint32 priority, rtk_uint32 traffictype)
{
if(priority > RTL8367C_PRIMAX)
return RT_ERR_QOS_INT_PRIORITY;
return rtl8367c_setAsicRegBit(RTL8367C_REG_HIGHPRI_CFG, priority, (traffictype?1:0));
}
/* Function Name:
* rtl8367c_setAsicPortMirrorRxFunction
* Description:
* Set the mirror function on RX of the mirrored
* Input:
* enabled - 1: enabled, 0: disabled
* Output:
* None
* Return:
* RT_ERR_OK - Success
* RT_ERR_SMI - SMI access error
* Note:
* None
*/
ret_t rtl8367c_setAsicPortMirrorRxFunction(rtk_uint32 enabled)
{
return rtl8367c_setAsicRegBit(RTL8367C_MIRROR_CTRL_REG, RTL8367C_MIRROR_RX_OFFSET, enabled);
}
/* Function Name:
* rtl8367c_setAsicPortMirrorVlanTxLeaky
* Description:
* Set the mirror function of VLAN TX leaky
* Input:
* enabled - 1: enabled, 0: disabled
* Output:
* None
* Return:
* RT_ERR_OK - Success
* RT_ERR_SMI - SMI access error
* Note:
* None
*/
ret_t rtl8367c_setAsicPortMirrorVlanTxLeaky(rtk_uint32 enabled)
{
return rtl8367c_setAsicRegBit(RTL8367C_REG_MIRROR_CTRL2, RTL8367C_MIRROR_TX_VLAN_LEAKY_OFFSET, enabled);
}
/* Function Name:
* rtl8367c_setAsicLutIpMulticastLookup
* Description:
* Set Lut IP multicast + VID lookup function
* Input:
* enabled - 1: enabled, 0: disabled
* Output:
* None
* Return:
* RT_ERR_OK - Success
* RT_ERR_SMI - SMI access error
* Note:
* None
*/
ret_t rtl8367c_setAsicLutIpMulticastVidLookup(rtk_uint32 enabled)
{
return rtl8367c_setAsicRegBit(RTL8367C_REG_LUT_CFG2, RTL8367C_LUT_IPMC_VID_HASH_OFFSET, enabled);
}
/* Function Name:
* rtl8367c_setAsicLutIpLookupMethod
* Description:
* Set Lut IP lookup hash with DIP or {DIP,SIP} pair
* Input:
* type - 1: When DIP can be found in IPMC_GROUP_TABLE, use DIP+SIP Hash, otherwise, use DIP+(SIP=0.0.0.0) Hash.
* 0: When DIP can be found in IPMC_GROUP_TABLE, use DIP+(SIP=0.0.0.0) Hash, otherwise use DIP+SIP Hash.
* Output:
* None
* Return:
* RT_ERR_OK - Success
* RT_ERR_SMI - SMI access error
* Note:
* None
*/
ret_t rtl8367c_setAsicLutIpLookupMethod(rtk_uint32 type)
{
return rtl8367c_setAsicRegBit(RTL8367C_REG_LUT_CFG, RTL8367C_LUT_IPMC_LOOKUP_OP_OFFSET, type);
}
/* Function Name:
* rtl8367c_setAsicOamEnable
* Description:
* Set OAM function state
* Input:
* enabled - OAM function usage 1:enable, 0:disabled
* Output:
* None
* Return:
* RT_ERR_OK - Success
* RT_ERR_SMI - SMI access error
* Note:
* None
*/
ret_t rtl8367c_setAsicOamEnable(rtk_uint32 enabled)
{
return rtl8367c_setAsicRegBit(RTL8367C_REG_OAM_CTRL, RTL8367C_OAM_CTRL_OFFSET, enabled);
}
