static void __init smdk6442_machine_init(void)
{
// s3c_device_nand.dev.platform_data = &s3c_nand_mtd_part_info;
smdk6442_smc911x_set();
#ifdef CONFIG_FB_S3C_AMS320
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
#endif
s3cfb_set_platdata(NULL);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));
s3c_ts_set_platdata(&s3c_ts_platform);
s3c_adc_set_platdata(&s3c_adc_platform);
/* fb */
// s3cfb_set_platdata(&fb_data);
platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices));
s5p6442_pm_init();
smdk_backlight_register();
#if defined(CONFIG_MMC_SDHCI_S3C)
s3c_sdhci_set_platdata();
#endif
s3c_fimc0_set_platdata(&fimc_plat);
s3c_fimc1_set_platdata(&fimc_plat);
s3c_fimc2_set_platdata(&fimc_plat);
smdk6442_cam0_power(1);
smdk6442_cam1_power(1);
}
void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
{
s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
}
static void __init smdkv210_machine_init(void)
{
/* Find out S5PC110 chip version */
_hw_version_check();
#ifdef CONFIG_ANDROID_PMEM
android_pmem_set_platdata();
#endif
/* i2c */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));
#if defined(CONFIG_HKDKC110_BOARD) && defined(CONFIG_INPUT_YAMAHA_SENSORS) && !defined(CONFIG_INPUT_BMA150_SENSOR)
// i2c-gpio sda/scl set pull-up yas529,bma150,ish1000
gpio_request(GPIO_SENSORS_SDA, "GPB2");
s3c_gpio_setpull(GPIO_SENSORS_SDA, S3C_GPIO_PULL_UP);
gpio_direction_input(GPIO_SENSORS_SDA);
gpio_free(GPIO_SENSORS_SDA);
gpio_request(GPIO_SENSORS_SCL, "GPB2");
s3c_gpio_setpull(GPIO_SENSORS_SCL, S3C_GPIO_PULL_UP);
gpio_direction_input(GPIO_SENSORS_SCL);
gpio_free(GPIO_SENSORS_SCL);
// BMA150 CS PIN --> HIGH
gpio_request(S5PV210_GPB(1), "GPB2");
s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_NONE);
gpio_direction_output(S5PV210_GPB(1), 1);
gpio_free(S5PV210_GPB(1));
i2c_register_board_info(4, i2c_devs4, ARRAY_SIZE(i2c_devs4));
#endif
/* to support system shut down */
pm_power_off = smdkv210_power_off;
#ifdef CONFIG_FB_S3C_LP101WH1
s3cfb_set_platdata(&lp101wh1_data);
#endif
#ifdef CONFIG_FB_S3C_LMS350DF
s3cfb_set_platdata(&lms350df_data);
#endif
#if defined(CONFIG_PM)
s3c_pm_init();
#endif
#ifdef CONFIG_VIDEO_FIMC
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat);
s3c_fimc1_set_platdata(&fimc_plat);
s3c_fimc2_set_platdata(&fimc_plat);
#endif
/* 5V */
hkdkc110_5V_power(1);
#ifdef CONFIG_VIDEO_MFC50
/* mfc */
s3c_mfc_set_platdata(NULL);
#endif
#ifdef CONFIG_VIDEO_TV20
s3c_set_qos();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC
s5pv210_default_sdhci0();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
s5pv210_default_sdhci1();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
s5pv210_default_sdhci2();
#endif
#ifdef CONFIG_S5PV210_SETUP_SDHCI
s3c_sdhci_set_platdata();
#endif
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
#if defined(CONFIG_HAVE_PWM)
smdk_backlight_register();
#endif
}
static void __init smdkc100_machine_init(void)
{
/* spi */
#ifdef CONFIG_SPI_S3C64XX
u32 val;
val = __raw_readl(S5PC1XX_GPBCON);
val &= ~(0xf<<12);
val |= (0x1<<12);
__raw_writel(val, S5PC1XX_GPBCON);
val = __raw_readl(S5PC1XX_GPBPUD);
val &= ~(0x3<<6);
val |= (0x2<<6);
__raw_writel(val, S5PC1XX_GPBPUD);
s3c64xx_spi_set_info(BUSNUM(0), S5PC1XX_SPI_SRCCLK_PCLK,
ARRAY_SIZE(smdk_spi0_csi));
spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));
#endif
s3c_device_nand.dev.platform_data = &s3c_nand_mtd_part_info;
s3c_device_onenand.dev.platform_data = &s3c_onenand_data;
//smdkc100_smc911x_set();
s3c_ts_set_platdata(&s3c_ts_platform);
s3c_adc_set_platdata(&s3c_adc_platform);
/* i2c */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
/* pb206x i2c */
pb206x_i2c_add_bus(0, 100);
pb206x_i2c_add_bus(1, 100);
pb206x_i2c_add_bus(2, 100);
pb206x_i2c_add_bus(3, 100);
pb206x_i2c_add_bus(4, 100);
//pb206x_i2c_add_bus(5, 100);
/* i2c client */
pp876ax_i2c_client_init();
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat);
s3c_fimc1_set_platdata(&fimc_plat);
s3c_fimc2_set_platdata(&fimc_plat);
s3c_csis_set_platdata(NULL);
/* fb */
#ifdef CONFIG_FB_S3C
s3cfb_set_platdata(NULL);
#endif
platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
#if defined(CONFIG_PM)
s5pc1xx_pm_init();
#endif
smdk_backlight_register();
#if defined(CONFIG_MMC_SDHCI_S3C)
s3c_sdhci_set_platdata();
#endif
smdkc100_reset_camera();
}
static void __init smdkv210_machine_init(void)
{
/* Find out S5PC110 chip version */
_hw_version_check();
/* OneNAND */
#ifdef CONFIG_MTD_ONENAND
//s3c_device_onenand.dev.platform_data = &s5p_onenand_data;
#endif
#ifdef CONFIG_DM9000
smdkv210_dm9000_set();
#endif
#ifdef CONFIG_ANDROID_PMEM
android_pmem_set_platdata();
#endif
/* i2c */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));
#ifdef CONFIG_FB_S3C
s3cfb_set_platdata(NULL);
#endif
#if defined(CONFIG_BLK_DEV_IDE_S3C)
s3c_ide_set_platdata(&smdkv210_ide_pdata);
#endif
#if defined(CONFIG_TOUCHSCREEN_S3C)
s3c_ts_set_platdata(&s3c_ts_platform);
#endif
#if defined(CONFIG_S5PV210_ADCTS)
s3c_adcts_set_platdata(&s3c_adcts_cfgs);
#endif
#if defined(CONFIG_PM)
s3c_pm_init();
#endif
#ifdef CONFIG_VIDEO_FIMC
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat);
s3c_fimc1_set_platdata(&fimc_plat);
s3c_fimc2_set_platdata(&fimc_plat);
s3c_csis_set_platdata(NULL);
smdkv210_cam0_power(1);
smdkv210_cam1_power(1);
smdkv210_mipi_cam_reset();
#endif
#ifdef CONFIG_VIDEO_MFC50
/* mfc */
s3c_mfc_set_platdata(NULL);
#endif
#ifdef CONFIG_S3C_DEV_HSMMC
s5pv210_default_sdhci0();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
s5pv210_default_sdhci1();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
s5pv210_default_sdhci2();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC3
s5pv210_default_sdhci3();
#endif
#ifdef CONFIG_S5PV210_SETUP_SDHCI
s3c_sdhci_set_platdata();
#endif
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
static void __init smdkv210_machine_init(void)
{
/* Find out S5PC110 chip version */
_hw_version_check();
/* OneNAND */
#ifdef CONFIG_MTD_ONENAND
//s3c_device_onenand.dev.platform_data = &s5p_onenand_data;
#endif
#ifdef CONFIG_MTD_NAND
//s3c_device_nand.dev.platform_data = &s5p_nand_data;
#endif
#ifdef CONFIG_DM9000
smdkv210_dm9000_set();
#endif
#ifdef CONFIG_ANDROID_PMEM
android_pmem_set_platdata();
#endif
/* i2c */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));
/* to support system shut down */
pm_power_off = smdkv210_power_off;
#if defined(CONFIG_SPI_CNTRLR_0)
s3cspi_set_slaves(BUSNUM(0), ARRAY_SIZE(s3c_slv_pdata_0), s3c_slv_pdata_0);
#endif
#if defined(CONFIG_SPI_CNTRLR_1)
s3cspi_set_slaves(BUSNUM(1), ARRAY_SIZE(s3c_slv_pdata_1), s3c_slv_pdata_1);
#endif
#if defined(CONFIG_SPI_CNTRLR_2)
s3cspi_set_slaves(BUSNUM(2), ARRAY_SIZE(s3c_slv_pdata_2), s3c_slv_pdata_2);
#endif
spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));
#ifdef CONFIG_FB_S3C_LTE480WV
s3cfb_set_platdata(<e480wv_fb_data);
#endif
#if defined(CONFIG_BLK_DEV_IDE_S3C)
s3c_ide_set_platdata(&smdkv210_ide_pdata);
#endif
#if defined(CONFIG_TOUCHSCREEN_S3C)
s3c_ts_set_platdata(&s3c_ts_platform);
#endif
#if defined(CONFIG_S5PV210_ADC)
s3c_adc_set_platdata(&s3c_adc_platform);
#endif
#if defined(CONFIG_PM)
s3c_pm_init();
#endif
#ifdef CONFIG_VIDEO_FIMC
/* fimc */
s3c_fimc0_set_platdata(&fimc_plat);
s3c_fimc1_set_platdata(&fimc_plat);
s3c_fimc2_set_platdata(&fimc_plat);
s3c_csis_set_platdata(NULL);
smdkv210_cam0_power(1);
smdkv210_cam1_power(1);
smdkv210_mipi_cam_reset();
#endif
#ifdef CONFIG_VIDEO_MFC50
/* mfc */
s3c_mfc_set_platdata(NULL);
#endif
#ifdef CONFIG_VIDEO_TV20
s3c_set_qos();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC
s5pv210_default_sdhci0();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
s5pv210_default_sdhci1();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
s5pv210_default_sdhci2();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC3
s5pv210_default_sdhci3();
#endif
#ifdef CONFIG_S5PV210_SETUP_SDHCI
s3c_sdhci_set_platdata();
#endif
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
#if defined(CONFIG_HAVE_PWM)
smdk_backlight_register();
#endif
}
static void __init mango210_machine_init(void)
{
/* Find out S5PC110 chip version */
_hw_version_check();
#ifdef CONFIG_MTD_NAND
// s3c_device_nand.dev.platform_data = &s5p_nand_data;
#endif
#ifdef CONFIG_SMSC911X
mango210_smsc911x_set();
#endif
#ifdef CONFIG_ANDROID_PMEM
android_pmem_set_platdata();
#endif
/* i2c */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));
/* to support system shut down */
pm_power_off = mango210_power_off;
#if defined(CONFIG_SPI_CNTRLR_0)
s3cspi_set_slaves(BUSNUM(0), ARRAY_SIZE(s3c_slv_pdata_0), s3c_slv_pdata_0);
#endif
#if defined(CONFIG_SPI_CNTRLR_1)
s3cspi_set_slaves(BUSNUM(1), ARRAY_SIZE(s3c_slv_pdata_1), s3c_slv_pdata_1);
#endif
#if defined(CONFIG_SPI_CNTRLR_2)
s3cspi_set_slaves(BUSNUM(2), ARRAY_SIZE(s3c_slv_pdata_2), s3c_slv_pdata_2);
#endif
spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));
#if defined(CONFIG_FB_S3C_LB070WV6) || defined(CONFIG_FB_S3C_LTN101NT05)
s3cfb_set_platdata(&mango_fb_data);
#endif
#if defined(CONFIG_TOUCHSCREEN_S3C)
s3c_ts_set_platdata(&s3c_ts_platform);
#endif
#if defined(CONFIG_S5PV210_ADC)
s3c_adc_set_platdata(&s3c_adc_platform);
#endif
#if defined(CONFIG_PM)
s3c_pm_init();
#endif
#ifdef CONFIG_VIDEO_FIMC
#ifdef CONFIG_S5PV210_SETUP_FIMC0
s3c_fimc0_set_platdata(&fimc_plat);
#endif
#ifdef CONFIG_S5PV210_SETUP_FIMC1
s3c_fimc1_set_platdata(&fimc_plat);
#endif
#ifdef CONFIG_S5PV210_SETUP_FIMC2
s3c_fimc2_set_platdata(&fimc_plat);
#endif
mango210_camera_set();
mango210_cam0_power(1);
#else
#ifdef CONFIG_S5PV210_SETUP_FIMC0
s3c_fimc0_set_platdata(NULL);
#endif
#ifdef CONFIG_S5PV210_SETUP_FIMC1
s3c_fimc1_set_platdata(NULL);
#endif
#ifdef CONFIG_S5PV210_SETUP_FIMC2
s3c_fimc2_set_platdata(NULL);
#endif
#endif
#ifdef CONFIG_SMSC911X
mango210_smsc911x_set();
#endif
#ifdef CONFIG_VIDEO_MFC50
/* mfc */
s3c_mfc_set_platdata(NULL);
#endif
#ifdef CONFIG_VIDEO_TV20
s3c_set_qos();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC
s5pv210_default_sdhci0();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
s5pv210_default_sdhci1();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
s5pv210_default_sdhci2();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC3
s5pv210_default_sdhci3();
#endif
#ifdef CONFIG_S5PV210_SETUP_SDHCI
s3c_sdhci_set_platdata();
#endif
platform_add_devices(mango210_devices, ARRAY_SIZE(mango210_devices));
#if defined(CONFIG_HAVE_PWM)
mango_backlight_register();
#endif
#ifdef CONFIG_USB_SUPPORT
mango210_usb_host_set();
#endif
}
