Ejemplos de s3cfb_extdsp_set_platdata en C++ (Cpp)

Ejemplo n.º 1

Archivo: board-universal5410-display.c Proyecto: 619619/T805-Basicrom-Kernel

void __init exynos5_universal5410_display_init(void)
{
#ifdef CONFIG_FB_MIPI_DSIM
	s5p_dsim1_set_platdata(&dsim_platform_data);
#endif
#ifdef CONFIG_S5P_DP
	s5p_dp_set_platdata(&universal5410_dp_data);
#endif

	s5p_fimd1_set_platdata(&universal5410_lcd1_pdata);
#if !defined(CONFIG_MACH_UNIVERSAL5410)
	samsung_bl_set(&universal5410_bl_gpio_info, &universal5410_bl_data);
#endif

#ifdef CONFIG_FB_S5P_EXTDSP
	s3cfb_extdsp_set_platdata(&default_extdsp_data);
#endif

	platform_add_devices(universal5410_display_devices,
			ARRAY_SIZE(universal5410_display_devices));

#ifdef CONFIG_S5P_DP
	exynos5_fimd1_setup_clock(&s5p_device_fimd1.dev,
			"sclk_fimd", "mout_mpll_bpll", 267 * MHZ);
#endif
#ifdef CONFIG_FB_MIPI_DSIM
#ifdef CONFIG_LCD_MIPI_AMS480GYXX
	exynos5_fimd1_setup_clock(&s5p_device_fimd1.dev,
			"sclk_fimd", "mout_mpll_bpll", 58 * MHZ);
#elif defined(CONFIG_LCD_MIPI_S6E8FA0) || defined(CONFIG_LCD_MIPI_ER63311)
	exynos5_fimd1_setup_clock(&s5p_device_fimd1.dev,
			"sclk_fimd", "mout_mpll_bpll", 134 * MHZ);
#endif
#endif
}

Ejemplo n.º 2

Archivo: board-universal5410-display.c Proyecto: Juanhulk/Adam-Kernel-GS4

void __init exynos5_universal5410_display_init(void)
{
	struct resource *res;

#if defined(CONFIG_LCD_MIPI_S6E8FA0)
	unsigned int lcd_id = lcdtype & 0xF;

	if (!gpio_get_value(GPIO_OLED_ID)) {
		dsim_info.dsim_ddi_pd = &ea8062_mipi_lcd_driver;
		pr_err("panel M\n");
	} else {
		if (lcd_id == 1 || lcd_id == 2) {
			dsim_info.dsim_ddi_pd = &s6e8fa0_mipi_lcd_driver;
			pr_err("panel A,B,C\n");
		} else if (lcd_id == 3 || lcd_id == 4) {
			dsim_info.dsim_ddi_pd = &s6e8fa0_6P_mipi_lcd_driver;
			pr_err("panel D,E,F\n");
		} else if (lcd_id == 5 || lcd_id == 6) {
			dsim_info.dsim_ddi_pd = &s6e8fa0_G_mipi_lcd_driver;
			pr_err("panel G\n");
		} else if (lcd_id == 7) {
			dsim_info.dsim_ddi_pd = &s6e8fa0_I_mipi_lcd_driver;
			pr_err("panel I\n");
		} else {
			dsim_info.dsim_ddi_pd = &s6e8fa0_I_mipi_lcd_driver;
			pr_err("panel select fail\n");
		}
	}
#elif defined(CONFIG_LCD_MIPI_S6E3FA0)
	dsim_info.dsim_ddi_pd = &s6e3fa0_mipi_lcd_driver;
#endif

#ifdef CONFIG_FB_MIPI_DSIM
	s5p_dsim1_set_platdata(&dsim_platform_data);
#endif
	s5p_fimd1_set_platdata(&universal5410_lcd1_pdata);

#ifdef CONFIG_FB_S5P_EXTDSP
	s3cfb_extdsp_set_platdata(&default_extdsp_data);
#endif

	platform_add_devices(universal5410_display_devices,
		ARRAY_SIZE(universal5410_display_devices));

#ifdef CONFIG_FB_MIPI_DSIM
#if defined(CONFIG_LCD_MIPI_S6E8FA0) || defined(CONFIG_LCD_MIPI_S6E3FA0)
	exynos5_fimd1_setup_clock(&s5p_device_fimd1.dev,
		"sclk_fimd", "mout_mpll_bpll", 134 * MHZ);
#endif
#endif
#ifdef CONFIG_FB_S5P_MDNIE
	keep_lcd_clk(&s5p_device_fimd1.dev);
	exynos5_fimd1_setup_clock(&s5p_device_fimd1.dev,
		"sclk_mdnie", "mout_mpll_bpll", 134 * MHZ);
	mdnie_device_register();
#endif
#if defined(CONFIG_FB_LCD_FREQ_SWITCH)
	lcdfreq_device_register();
#endif

	res = platform_get_resource(&s5p_device_fimd1, IORESOURCE_MEM, 1);
	if (res) {
		res->start = bootloaderfb_start;
		res->end = res->start + bootloaderfb_size - 1;
		pr_info("bootloader fb located at %8X-%8X\n", res->start, res->end);
	} else {
		pr_err("failed to find bootloader fb resource\n");
	}
}