/* sa1100_pcmcia_driver_init()
* ^^^^^^^^^^^^^^^^^^^^^^^^^^^
*
* This routine performs a basic sanity check to ensure that this
* kernel has been built with the appropriate board-specific low-level
* PCMCIA support, performs low-level PCMCIA initialization, registers
* this socket driver with Card Services, and then spawns the daemon
* thread which is the real workhorse of the socket driver.
*
* Returns: 0 on success, -1 on error
*/
static int __init sa1100_pcmcia_driver_init(void)
{
servinfo_t info;
struct pcmcia_init pcmcia_init;
struct pcmcia_state state[SA1100_PCMCIA_MAX_SOCK];
struct pcmcia_state_array state_array;
unsigned int i, clock;
unsigned long mecr;
int ret;
printk(KERN_INFO "SA-1100 PCMCIA (CS release %s)\n", CS_RELEASE);
CardServices(GetCardServicesInfo, &info);
if (info.Revision != CS_RELEASE_CODE) {
printk(KERN_ERR "Card Services release codes do not match\n");
return -EINVAL;
}
ret = sa1100_pcmcia_machine_init();
if (ret)
return ret;
pcmcia_init.handler = sa1100_pcmcia_interrupt;
ret = pcmcia_low_level->init(&pcmcia_init);
if (ret < 0) {
printk(KERN_ERR "Unable to initialize kernel PCMCIA service (%d).\n", ret);
return ret == -1 ? -EIO : ret;
}
sa1100_pcmcia_socket_count = ret;
state_array.size = sa1100_pcmcia_socket_count;
state_array.state = state;
memset(state, 0, sizeof(state));
if (pcmcia_low_level->socket_state(&state_array) < 0) {
pcmcia_low_level->shutdown();
printk(KERN_ERR "Unable to get PCMCIA status from kernel.\n");
return -EIO;
}
/*
* We initialize the MECR to default values here, because we are
* not guaranteed to see a SetIOMap operation at runtime.
*/
mecr = MECR;
clock = cpufreq_get(0);
for (i = 0; i < sa1100_pcmcia_socket_count; i++) {
struct sa1100_pcmcia_socket *skt = PCMCIA_SOCKET(i);
struct pcmcia_irq_info irq_info;
if (!request_mem_region(_PCMCIA(i), PCMCIASp, "PCMCIA")) {
ret = -EBUSY;
goto out_err;
}
irq_info.sock = i;
irq_info.irq = -1;
ret = pcmcia_low_level->get_irq_info(&irq_info);
if (ret < 0)
printk(KERN_ERR "Unable to get IRQ for socket %u (%d)\n", i, ret);
skt->irq = irq_info.irq;
skt->k_state = state[i];
skt->speed_io = SA1100_PCMCIA_IO_ACCESS;
skt->speed_attr = SA1100_PCMCIA_5V_MEM_ACCESS;
skt->speed_mem = SA1100_PCMCIA_5V_MEM_ACCESS;
skt->phys_attr = _PCMCIAAttr(i);
skt->phys_mem = _PCMCIAMem(i);
skt->virt_io = ioremap(_PCMCIAIO(i), 0x10000);
if (skt->virt_io == NULL) {
ret = -ENOMEM;
goto out_err;
}
MECR_FAST_SET(mecr, i, 0);
MECR_BSIO_SET(mecr, i, sa1100_pcmcia_mecr_bs(skt->speed_io, clock));
MECR_BSA_SET(mecr, i, sa1100_pcmcia_mecr_bs(skt->speed_attr, clock));
MECR_BSM_SET(mecr, i, sa1100_pcmcia_mecr_bs(skt->speed_mem, clock));
}
MECR = mecr;
#ifdef CONFIG_CPU_FREQ
ret = cpufreq_register_notifier(&sa1100_pcmcia_notifier_block);
if (ret < 0) {
printk(KERN_ERR "Unable to register CPU frequency change notifier (%d)\n", ret);
goto out_err;
}
#endif
/* Only advertise as many sockets as we can detect */
ret = register_ss_entry(sa1100_pcmcia_socket_count,
&sa1100_pcmcia_operations);
if (ret < 0) {
printk(KERN_ERR "Unable to register sockets\n");
goto out_err;
}
/*
* Start the event poll timer. It will reschedule by itself afterwards.
*/
sa1100_pcmcia_poll_event(0);
return 0;
out_err:
for (i = 0; i < sa1100_pcmcia_socket_count; i++) {
iounmap(sa1100_pcmcia_socket[i].virt_io);
release_mem_region(_PCMCIA(i), PCMCIASp);
}
pcmcia_low_level->shutdown();
return ret;
} /* sa1100_pcmcia_driver_init() */
/* sa1100_pcmcia_driver_init()
* ^^^^^^^^^^^^^^^^^^^^^^^^^^^
*
* This routine performs a basic sanity check to ensure that this
* kernel has been built with the appropriate board-specific low-level
* PCMCIA support, performs low-level PCMCIA initialization, registers
* this socket driver with Card Services, and then spawns the daemon
* thread which is the real workhorse of the socket driver.
*
* Please see linux/Documentation/arm/SA1100/PCMCIA for more information
* on the low-level kernel interface.
*
* Returns: 0 on success, -1 on error
*/
static int __init sa1100_pcmcia_driver_init(void){
servinfo_t info;
struct pcmcia_init pcmcia_init;
struct pcmcia_state state[SA1100_PCMCIA_MAX_SOCK];
struct pcmcia_state_array state_array;
unsigned int i, clock;
unsigned long mecr;
printk(KERN_INFO "SA-1100 PCMCIA (CS release %s)\n", CS_RELEASE);
CardServices(GetCardServicesInfo, &info);
if(info.Revision!=CS_RELEASE_CODE){
printk(KERN_ERR "Card Services release codes do not match\n");
return -1;
}
if(machine_is_assabet()){
#ifdef CONFIG_SA1100_ASSABET
if(machine_has_neponset()){
#ifdef CONFIG_ASSABET_NEPONSET
pcmcia_low_level=&neponset_pcmcia_ops;
#else
printk(KERN_ERR "Card Services disabled: missing Neponset support\n");
return -1;
#endif
}else{
pcmcia_low_level=&assabet_pcmcia_ops;
}
#endif
} else if (machine_is_freebird()) {
#ifdef CONFIG_SA1100_FREEBIRD
pcmcia_low_level = &freebird_pcmcia_ops;
#endif
} else if (machine_is_h3xxx()) {
#ifdef CONFIG_SA1100_H3XXX
pcmcia_low_level = &h3600_pcmcia_ops;
#endif
} else if (machine_is_cerf()) {
#ifdef CONFIG_SA1100_CERF
pcmcia_low_level = &cerf_pcmcia_ops;
#endif
} else if (machine_is_graphicsclient()) {
#ifdef CONFIG_SA1100_GRAPHICSCLIENT
pcmcia_low_level = &gcplus_pcmcia_ops;
#endif
} else if (machine_is_xp860()) {
#ifdef CONFIG_SA1100_XP860
pcmcia_low_level = &xp860_pcmcia_ops;
#endif
} else if (machine_is_yopy()) {
#ifdef CONFIG_SA1100_YOPY
pcmcia_low_level = &yopy_pcmcia_ops;
#endif
} else if (machine_is_shannon()) {
#ifdef CONFIG_SA1100_SHANNON
pcmcia_low_level = &shannon_pcmcia_ops;
#endif
} else if (machine_is_pangolin()) {
#ifdef CONFIG_SA1100_PANGOLIN
pcmcia_low_level = &pangolin_pcmcia_ops;
#endif
} else if (machine_is_jornada720()) {
#ifdef CONFIG_SA1100_JORNADA720
pcmcia_low_level = &jornada720_pcmcia_ops;
#endif
} else if(machine_is_pfs168()){
#ifdef CONFIG_SA1100_PFS168
pcmcia_low_level=&pfs168_pcmcia_ops;
#endif
} else if(machine_is_flexanet()){
#ifdef CONFIG_SA1100_FLEXANET
pcmcia_low_level=&flexanet_pcmcia_ops;
#endif
} else if(machine_is_simpad()){
#ifdef CONFIG_SA1100_SIMPAD
pcmcia_low_level=&simpad_pcmcia_ops;
#endif
} else if(machine_is_graphicsmaster()) {
#ifdef CONFIG_SA1100_GRAPHICSMASTER
pcmcia_low_level=&graphicsmaster_pcmcia_ops;
#endif
} else if(machine_is_adsbitsy()) {
#ifdef CONFIG_SA1100_ADSBITSY
pcmcia_low_level=&adsbitsy_pcmcia_ops;
#endif
} else if(machine_is_stork()) {
#ifdef CONFIG_SA1100_STORK
pcmcia_low_level=&stork_pcmcia_ops;
#endif
}
if (!pcmcia_low_level) {
printk(KERN_ERR "This hardware is not supported by the SA1100 Card Service driver\n");
return -ENODEV;
}
pcmcia_init.handler=sa1100_pcmcia_interrupt;
if((sa1100_pcmcia_socket_count=pcmcia_low_level->init(&pcmcia_init))<0){
printk(KERN_ERR "Unable to initialize kernel PCMCIA service.\n");
return -EIO;
}
state_array.size=sa1100_pcmcia_socket_count;
state_array.state=state;
if(pcmcia_low_level->socket_state(&state_array)<0){
printk(KERN_ERR "Unable to get PCMCIA status from kernel.\n");
return -EIO;
}
/* We initialize the MECR to default values here, because we are
* not guaranteed to see a SetIOMap operation at runtime.
*/
mecr=0;
clock = cpufreq_get(0);
for(i=0; i<sa1100_pcmcia_socket_count; ++i){
sa1100_pcmcia_socket[i].k_state=state[i];
/* This is an interim fix. Apparently, SetSocket is no longer
* called to initialize each socket (prior to the first detect
* event). For now, we'll just manually set up the mask.
*/
sa1100_pcmcia_socket[i].cs_state.csc_mask=SS_DETECT;
sa1100_pcmcia_socket[i].virt_io=(i==0)?PCMCIA_IO_0_BASE:PCMCIA_IO_1_BASE;
sa1100_pcmcia_socket[i].phys_attr=_PCMCIAAttr(i);
sa1100_pcmcia_socket[i].phys_mem=_PCMCIAMem(i);
MECR_FAST_SET(mecr, i, 0);
MECR_BSIO_SET(mecr, i,
sa1100_pcmcia_mecr_bs(SA1100_PCMCIA_IO_ACCESS, clock));
MECR_BSA_SET(mecr, i,
sa1100_pcmcia_mecr_bs(SA1100_PCMCIA_5V_MEM_ACCESS, clock));
MECR_BSM_SET(mecr, i,
sa1100_pcmcia_mecr_bs(SA1100_PCMCIA_5V_MEM_ACCESS, clock));
sa1100_pcmcia_socket[i].speed_io=SA1100_PCMCIA_IO_ACCESS;
sa1100_pcmcia_socket[i].speed_attr=SA1100_PCMCIA_5V_MEM_ACCESS;
sa1100_pcmcia_socket[i].speed_mem=SA1100_PCMCIA_5V_MEM_ACCESS;
}
MECR=mecr;
#ifdef CONFIG_CPU_FREQ
if(cpufreq_register_notifier(&sa1100_pcmcia_notifier_block) < 0){
printk(KERN_ERR "Unable to register CPU frequency change notifier\n");
return -ENXIO;
}
#endif
/* Only advertise as many sockets as we can detect: */
if(register_ss_entry(sa1100_pcmcia_socket_count,
&sa1100_pcmcia_operations)<0){
printk(KERN_ERR "Unable to register socket service routine\n");
return -ENXIO;
}
/* Start the event poll timer. It will reschedule by itself afterwards. */
sa1100_pcmcia_poll_event(0);
DEBUG(1, "sa1100: initialization complete\n");
return 0;
} /* sa1100_pcmcia_driver_init() */