uint8_t menu_GPS_MAIN_SCN(void)
{
menu_key_loop();
if(keycode == KEY_OK)
{
switch(mi_index)
{
case 0:
save_position();
break;
case 1:
finish_logfile();
sys_state = SYS_READY;
break;
case 2:
return 2;
break;
default:
break;
}
return 1;
}
else
{
return 2;
}
return 0;
}
void Key_task(void)
{
key_scan();
if(keycode != KEY_NULL)
{
if(scn_mode == GPS_MAIN_SCN)
{
switch(keycode)
{
case KEY_UP:
case KEY_DOWN:
switch_scn_flag(0);
set_screen(GPS_MAIN_SCN);
break;
case KEY_LEFT:
save_position();
break;
case KEY_OK:
case KEY_CANCEL:
menu_start();
break;
default:
break;
}
}
}
}
void print_input_buf( char * str, int input_off )
{
save_position();
move_xy( 20, 10 );
printf(" \n");
move_xy( 20, 10 );
printf("%s len = %d\n", str, strlen(str) );
printf( "input_off = %d\n", input_off );
fflush( NULL );
restore_position();
}
void RedScreen::show_full_screen()
{
if (_full_screen) {
return;
}
RecurciveLock lock(_update_lock);
hide();
save_position();
_full_screen = true;
__show_full_screen();
}
int debug( char * fmt, char * str )
{
save_position();
move_xy( 65, 15 );
printf(" \n");
move_xy( 65, 15 );
printf( fmt, str );
restore_position();
}
int show_left_words( char * prefix, char left_words[][MAX_WORDS_LEN] )
{
save_position();
bar( 2, 6, winx / 3 - 3, left_words_num, ' ' );
int i;
for( i=0; i<have_search_words_num; i++ ) {
move_xy( 3, 6+i );
left_words[i][winx/3-5-strlen(prefix)] = '\0';
printf("%s%s", prefix, left_words[i] );
}
fflush( NULL );
restore_position();
}
RedScreen::RedScreen(Application& owner, int id, const std::string& name, int width, int height)
: _owner (owner)
, _id (id)
, _refs (1)
, _window (*this)
, _active (false)
, _full_screen (false)
, _out_of_sync (false)
, _frame_area (false)
, _periodic_update (false)
, _key_interception (false)
, _update_by_timer (true)
, _size_locked (false)
, _forec_update_timer (0)
, _update_timer (new UpdateTimer(this))
, _composit_area (NULL)
, _update_mark (1)
, _monitor (NULL)
, _default_cursor (NULL)
, _inactive_cursor (NULL)
, _pixel_format_index (0)
, _update_interrupt_trigger (NULL)
, _pointer_layer (NULL)
, _mouse_captured (false)
, _active_layer_change_event (false)
, _pointer_on_screen (false)
{
region_init(&_dirty_region);
set_name(name);
_size.x = width;
_size.y = height;
_origin.x = _origin.y = 0;
create_composit_area();
_window.resize(_size.x, _size.y);
save_position();
if ((_default_cursor = Platform::create_default_cursor()) == NULL) {
THROW("create default cursor failed");
}
if ((_inactive_cursor = Platform::create_inactive_cursor()) == NULL) {
THROW("create inactive cursor failed");
}
_window.set_cursor(_default_cursor);
update_menu();
AutoRef<Icon> icon(Platform::load_icon(RED_ICON_RES_ID));
_window.set_icon(*icon);
_window.start_key_interception();
}
void glStaticMovesRobot::save_file( string mFilename )
{
ofstream outfile;
outfile.open(mFilename);
int count=1;
struct stBodyPositionVector bp;
bool result = false;
while (result==false) // Loop thru all positions within the demo() function.
{
result = demo();
extract_body_pose(&bp);
outfile << "Move #" << count++ << endl;
save_position( outfile, &bp );
m_left_arm.m_gripper.write_angles ( outfile );
m_right_arm.m_gripper.write_angles( outfile );
}
outfile.close();
}
void show_english(char *english)
{
save_position();
int i,j,k;
for(i = 0;i < word_count;i++)
{
move_xy(6 + i,2);
for(j = 0;english[j] != 0 && j < win_y / 3 - 3;j++)
putchar(english[j]);
for(k = 0;word[i][k] != 0 && j < win_y / 3 - 3;k++,j++)
putchar(word[i][k]);
}
fflush(stdout);
restore_position();
}
int show_explain( char * words, char * explain )
{
save_position();
bar( winx/3 + 2, 7, winx/3*2 -2, winy - 8, ' ' );
move_xy( winx / 3 + 2, 7 );
if( explain == NULL ) {
printf("sorry, 没有找到这个单词.\n" );
} else {
printf("------ <<善哉电子辞典>> -------");
move_xy( winx / 3 + 2, 8 );
printf("单词: ");
move_xy( winx / 3 + 2, 9 );
printf(" %s", words );
move_xy( winx / 3 + 2, 10 );
printf("意义: ");
move_xy( winx / 3 + 2, 11 );
printf( " %s\n", explain );
}
restore_position();
}
void show_chinese(char *chinese,char *english)
{
int i,l;
if(chinese != NULL && english != NULL)
{
save_position();
move_xy(7,win_y / 3 + 1);
puts("单词:");
move_xy(8,win_y / 3 + 1);
printf(" %s\n",english);
move_xy(10,win_y / 3 + 1);
puts("意义:");
move_xy(11,win_y / 3 + 1);
printf(" %s\n",chinese);
restore_position();
}
}
char *get_next_line2(const int fd)
{
static char buffer[SIZE_BUF];
static int position = 0;
char *returned;
int i;
int ret;
i = 0;
if((ret = read(fd, buffer + position, SIZE_READ - position)) <= 0)
return (NULL);
buffer[SIZE_BUF] = '\0';
if ((returned = malloc(sizeof(char) * SIZE_BUF)) == NULL)
return (NULL);
returned[i] = '\0';
while (buffer[i] && buffer[i] != '\n')
returned[i] = buffer[i++];
if (buffer[i] == '\n')
i++;
position = save_position(buffer, i);
return (returned);
}
void
save_histogram_opts (FILE *fp)
{
switch (histogram_opts.type) {
default:
case HT_CLUSTERED:
fprintf(fp,"clustered gap %d ",histogram_opts.gap); break;
case HT_ERRORBARS:
fprintf(fp,"errorbars gap %d lw %g",histogram_opts.gap,histogram_opts.bar_lw); break;
case HT_STACKED_IN_LAYERS:
fprintf(fp,"rowstacked "); break;
case HT_STACKED_IN_TOWERS:
fprintf(fp,"columnstacked "); break;
}
if (fp == stderr)
fprintf(fp,"\n\t\t");
fprintf(fp,"title");
save_textcolor(fp, &histogram_opts.title.textcolor);
if (histogram_opts.title.font)
fprintf(fp, " font \"%s\" ", histogram_opts.title.font);
save_position(fp, &histogram_opts.title.offset, TRUE);
fprintf(fp, "\n");
}
static void save_config_cb (void * hook_data, void * user_data)
{
if (gtk_widget_get_visible ((GtkWidget *) user_data))
save_position ((GtkWidget *) user_data);
}
static bool_t hide_cb (GtkWidget * window)
{
save_position (window);
gtk_widget_hide (window);
return TRUE;
}
static void
save_tics(FILE *fp, AXIS_INDEX axis)
{
if ((axis_array[axis].ticmode & TICS_MASK) == NO_TICS) {
fprintf(fp, "set no%stics\n", axis_defaults[axis].name);
return;
}
fprintf(fp, "set %stics %s %s scale %g,%g %smirror %s ",
axis_defaults[axis].name,
((axis_array[axis].ticmode & TICS_MASK) == TICS_ON_AXIS)
? "axis" : "border",
(axis_array[axis].tic_in) ? "in" : "out",
axis_array[axis].ticscale, axis_array[axis].miniticscale,
(axis_array[axis].ticmode & TICS_MIRROR) ? "" : "no",
axis_array[axis].tic_rotate ? "rotate" : "norotate");
if (axis_array[axis].tic_rotate)
fprintf(fp,"by %d ",axis_array[axis].tic_rotate);
save_position(fp, &axis_array[axis].ticdef.offset, TRUE);
if (axis_array[axis].manual_justify) {
switch (axis_array[axis].label.pos) {
case LEFT:{
fputs(" left", fp);
break;
}
case RIGHT:{
fputs(" right", fp);
break;
}
case CENTRE:{
fputs(" center", fp);
break;
}
}
} else
fputs(" autojustify", fp);
fprintf(fp, "\nset %stics ", axis_defaults[axis].name);
switch (axis_array[axis].ticdef.type) {
case TIC_COMPUTED:{
fputs("autofreq ", fp);
break;
}
case TIC_MONTH:{
fprintf(fp, "\nset %smtics", axis_defaults[axis].name);
break;
}
case TIC_DAY:{
fprintf(fp, "\nset %sdtics", axis_defaults[axis].name);
break;
}
case TIC_SERIES:
if (axis_array[axis].ticdef.def.series.start != -VERYLARGE) {
SAVE_NUM_OR_TIME(fp,
(double) axis_array[axis].ticdef.def.series.start,
axis);
putc(',', fp);
}
fprintf(fp, "%g", axis_array[axis].ticdef.def.series.incr);
if (axis_array[axis].ticdef.def.series.end != VERYLARGE) {
putc(',', fp);
SAVE_NUM_OR_TIME(fp,
(double) axis_array[axis].ticdef.def.series.end,
axis);
}
break;
case TIC_USER:
break;
}
fprintf(fp, (axis_array[axis].ticdef.rangelimited)?" rangelimit":" norangelimit");
if (axis_array[axis].ticdef.font && *axis_array[axis].ticdef.font)
fprintf(fp, " font \"%s\"", axis_array[axis].ticdef.font);
if (axis_array[axis].ticdef.textcolor.type != TC_DEFAULT)
save_textcolor(fp, &axis_array[axis].ticdef.textcolor);
putc('\n', fp);
if (axis_array[axis].ticdef.def.user) {
struct ticmark *t;
fprintf(fp, "set %stics %s ", axis_defaults[axis].name,
(axis_array[axis].ticdef.type == TIC_USER) ? "" : "add");
fputs(" (", fp);
for (t = axis_array[axis].ticdef.def.user; t != NULL; t = t->next) {
if (t->level < 0) /* Don't save ticlabels read from data file */
continue;
if (t->label)
fprintf(fp, "\"%s\" ", conv_text(t->label));
SAVE_NUM_OR_TIME(fp, (double) t->position, axis);
if (t->level)
fprintf(fp, " %d", t->level);
if (t->next) {
fputs(", ", fp);
}
}
fputs(")\n", fp);
}
}
/* Save/show rectangle <tag> (0 means show all) */
void
save_object(FILE *fp, int tag)
{
t_object *this_object;
t_rectangle *this_rect;
t_circle *this_circle;
t_ellipse *this_ellipse;
TBOOLEAN showed = FALSE;
for (this_object = first_object; this_object != NULL; this_object = this_object->next) {
if ((this_object->object_type == OBJ_RECTANGLE)
&& (tag == 0 || tag == this_object->tag)) {
this_rect = &this_object->o.rectangle;
showed = TRUE;
fprintf(fp, "%sobject %2d rect ", (fp==stderr) ? "\t" : "set ",this_object->tag);
if (this_rect->type == 1) {
fprintf(fp, "center ");
save_position(fp, &this_rect->center, FALSE);
fprintf(fp, " size ");
save_position(fp, &this_rect->extent, FALSE);
} else {
fprintf(fp, "from ");
save_position(fp, &this_rect->bl, FALSE);
fprintf(fp, " to ");
save_position(fp, &this_rect->tr, FALSE);
}
}
else if ((this_object->object_type == OBJ_CIRCLE)
&& (tag == 0 || tag == this_object->tag)) {
struct position *e = &this_object->o.circle.extent;
this_circle = &this_object->o.circle;
showed = TRUE;
fprintf(fp, "%sobject %2d circle ", (fp==stderr) ? "\t" : "set ",this_object->tag);
fprintf(fp, "center ");
save_position(fp, &this_circle->center, FALSE);
fprintf(fp, " size ");
fprintf(fp, "%s%g", e->scalex == first_axes ? "" : coord_msg[e->scalex], e->x);
fprintf(fp, " arc [%g:%g] ", this_circle->arc_begin, this_circle->arc_end);
}
else if ((this_object->object_type == OBJ_ELLIPSE)
&& (tag == 0 || tag == this_object->tag)) {
struct position *e = &this_object->o.ellipse.extent;
this_ellipse = &this_object->o.ellipse;
showed = TRUE;
fprintf(fp, "%sobject %2d ellipse ", (fp==stderr) ? "\t" : "set ",this_object->tag);
fprintf(fp, "center ");
save_position(fp, &this_ellipse->center, FALSE);
fprintf(fp, " size ");
fprintf(fp, "%s%g", e->scalex == first_axes ? "" : coord_msg[e->scalex], e->x);
fprintf(fp, ", %s%g", e->scaley == e->scalex ? "" : coord_msg[e->scaley], e->y);
fprintf(fp, " angle %g", this_ellipse->orientation);
fputs(" units ", fp);
switch (this_ellipse->type) {
case ELLIPSEAXES_XY:
fputs("xy", fp);
break;
case ELLIPSEAXES_XX:
fputs("xx", fp);
break;
case ELLIPSEAXES_YY:
fputs("yy", fp);
break;
}
}
else if ((this_object->object_type == OBJ_POLYGON)
&& (tag == 0 || tag == this_object->tag)) {
t_polygon *this_polygon = &this_object->o.polygon;
int nv;
showed = TRUE;
fprintf(fp, "%sobject %2d polygon ", (fp==stderr) ? "\t" : "set ",this_object->tag);
if (this_polygon->vertex) {
fprintf(fp, "from ");
save_position(fp, &this_polygon->vertex[0], FALSE);
}
for (nv=1; nv < this_polygon->type; nv++) {
fprintf(fp, (fp==stderr) ? "\n\t\t\t to " : " to ");
save_position(fp, &this_polygon->vertex[nv], FALSE);
}
}
/* Properties common to all objects */
if (tag == 0 || tag == this_object->tag) {
fprintf(fp, "\n%sobject %2d ", (fp==stderr) ? "\t" : "set ",this_object->tag);
fprintf(fp, "%s ", this_object->layer > 0 ? "front" : this_object->layer < 0 ? "behind" : "back");
if (this_object->clip == OBJ_NOCLIP)
fputs("noclip ", fp);
else
fputs("clip ", fp);
if (this_object->lp_properties.l_width)
fprintf(fp, "lw %.1f ",this_object->lp_properties.l_width);
fprintf(fp, "fc ");
if (this_object->lp_properties.l_type == LT_DEFAULT)
fprintf(fp,"default");
else if (this_object->lp_properties.use_palette)
save_pm3dcolor(fp, &this_object->lp_properties.pm3d_color);
else
fprintf(fp, "lt %d",this_object->lp_properties.l_type+1);
fprintf(fp, " fillstyle ");
save_fillstyle(fp, &this_object->fillstyle);
}
}
if (tag > 0 && !showed)
int_error(c_token, "object not found");
}
static void
save_set_all(FILE *fp)
{
struct text_label *this_label;
struct arrow_def *this_arrow;
struct linestyle_def *this_linestyle;
struct arrowstyle_def *this_arrowstyle;
legend_key *key = &keyT;
int axis;
/* opinions are split as to whether we save term and outfile
* as a compromise, we output them as comments !
*/
if (term)
fprintf(fp, "# set terminal %s %s\n", term->name, term_options);
else
fputs("# set terminal unknown\n", fp);
if (outstr)
fprintf(fp, "# set output '%s'\n", outstr);
else
fputs("# set output\n", fp);
fprintf(fp, "\
%sset clip points\n\
%sset clip one\n\
%sset clip two\n\
set bar %f %s\n",
(clip_points) ? "" : "un",
(clip_lines1) ? "" : "un",
(clip_lines2) ? "" : "un",
bar_size, (bar_layer == LAYER_BACK) ? "back" : "front");
if (draw_border) {
fprintf(fp, "set border %d %s", draw_border, border_layer == 0 ? "back" : "front");
save_linetype(fp, &border_lp, FALSE);
fprintf(fp, "\n");
} else
fputs("unset border\n", fp);
for (axis = FIRST_AXES; axis < LAST_REAL_AXIS; axis++) {
if (axis == SECOND_Z_AXIS) continue;
if (strlen(axis_array[axis].timefmt))
fprintf(fp, "set timefmt %s \"%s\"\n", axis_defaults[axis].name,
conv_text(axis_array[axis].timefmt));
if (axis == COLOR_AXIS) continue;
fprintf(fp, "set %sdata %s\n", axis_defaults[axis].name,
axis_array[axis].datatype == DT_TIMEDATE ? "time" :
"");
}
if (boxwidth < 0.0)
fputs("set boxwidth\n", fp);
else
fprintf(fp, "set boxwidth %g %s\n", boxwidth,
(boxwidth_is_absolute) ? "absolute" : "relative");
fprintf(fp, "set style fill ");
save_fillstyle(fp, &default_fillstyle);
#ifdef EAM_OBJECTS
/* Default rectangle style */
fprintf(fp, "set style rectangle %s fc ",
default_rectangle.layer > 0 ? "front" :
default_rectangle.layer < 0 ? "behind" : "back");
if (default_rectangle.lp_properties.use_palette)
save_pm3dcolor(fp, &default_rectangle.lp_properties.pm3d_color);
else
fprintf(fp, "lt %d",default_rectangle.lp_properties.l_type+1);
fprintf(fp, " fillstyle ");
save_fillstyle(fp, &default_rectangle.fillstyle);
/* Default circle properties */
fprintf(fp, "set style circle radius ");
save_position(fp, &default_circle.o.circle.extent, FALSE);
fputs(" \n", fp);
/* Default ellipse properties */
fprintf(fp, "set style ellipse size ");
save_position(fp, &default_ellipse.o.ellipse.extent, FALSE);
fprintf(fp, " angle %g ", default_ellipse.o.ellipse.orientation);
fputs("units ", fp);
switch (default_ellipse.o.ellipse.type) {
case ELLIPSEAXES_XY:
fputs("xy\n", fp);
break;
case ELLIPSEAXES_XX:
fputs("xx\n", fp);
break;
case ELLIPSEAXES_YY:
fputs("yy\n", fp);
break;
}
#endif
if (dgrid3d) {
if( dgrid3d_mode == DGRID3D_QNORM ) {
fprintf(fp, "set dgrid3d %d,%d, %d\n",
dgrid3d_row_fineness,
dgrid3d_col_fineness,
dgrid3d_norm_value);
} else if( dgrid3d_mode == DGRID3D_SPLINES ) {
fprintf(fp, "set dgrid3d %d,%d splines\n",
dgrid3d_row_fineness, dgrid3d_col_fineness );
} else {
fprintf(fp, "set dgrid3d %d,%d %s%s %f,%f\n",
dgrid3d_row_fineness,
dgrid3d_col_fineness,
reverse_table_lookup(dgrid3d_mode_tbl, dgrid3d_mode),
dgrid3d_kdensity ? " kdensity2d" : "",
dgrid3d_x_scale,
dgrid3d_y_scale );
}
}
fprintf(fp, "set dummy %s,%s\n", set_dummy_var[0], set_dummy_var[1]);
#define SAVE_FORMAT(axis) \
fprintf(fp, "set format %s \"%s\"\n", axis_defaults[axis].name, \
conv_text(axis_array[axis].formatstring));
SAVE_FORMAT(FIRST_X_AXIS );
SAVE_FORMAT(FIRST_Y_AXIS );
SAVE_FORMAT(SECOND_X_AXIS);
SAVE_FORMAT(SECOND_Y_AXIS);
SAVE_FORMAT(FIRST_Z_AXIS );
SAVE_FORMAT(COLOR_AXIS );
SAVE_FORMAT(POLAR_AXIS );
#undef SAVE_FORMAT
fprintf(fp, "set angles %s\n",
(ang2rad == 1.0) ? "radians" : "degrees");
/* Grid back/front controls tics also. Make sure it is saved */
if (grid_layer >= 0)
fprintf(fp,"set tics %s\n", grid_layer == 0 ? "back" : "front");
if (! some_grid_selected())
fputs("unset grid\n", fp);
else {
if (polar_grid_angle) /* set angle already output */
fprintf(fp, "set grid polar %f\n", polar_grid_angle / ang2rad);
else
fputs("set grid nopolar\n", fp);
#define SAVE_GRID(axis) \
fprintf(fp, " %s%stics %sm%stics", \
axis_array[axis].gridmajor ? "" : "no", \
axis_defaults[axis].name, \
axis_array[axis].gridminor ? "" : "no", \
axis_defaults[axis].name);
fputs("set grid", fp);
SAVE_GRID(FIRST_X_AXIS);
SAVE_GRID(FIRST_Y_AXIS);
SAVE_GRID(FIRST_Z_AXIS);
fputs(" \\\n", fp);
SAVE_GRID(SECOND_X_AXIS);
SAVE_GRID(SECOND_Y_AXIS);
SAVE_GRID(COLOR_AXIS);
fputs("\n", fp);
#undef SAVE_GRID
fprintf(fp, "set grid %s ", (grid_layer==-1) ? "layerdefault" : ((grid_layer==0) ? "back" : "front"));
save_linetype(fp, &grid_lp, FALSE);
fprintf(fp, ", ");
save_linetype(fp, &mgrid_lp, FALSE);
fputc('\n', fp);
}
fprintf(fp, "%sset raxis\n", raxis ? "" : "un");
fprintf(fp, "set key title \"%s\"", conv_text(key->title));
if (key->font)
fprintf(fp, " font \"%s\"", key->font);
if (key->textcolor.type != TC_LT || key->textcolor.lt != LT_BLACK)
save_textcolor(fp, &key->textcolor);
fputs("\n", fp);
fputs("set key ", fp);
switch (key->region) {
case GPKEY_AUTO_INTERIOR_LRTBC:
fputs("inside", fp);
break;
case GPKEY_AUTO_EXTERIOR_LRTBC:
fputs("outside", fp);
break;
case GPKEY_AUTO_EXTERIOR_MARGIN:
switch (key->margin) {
case GPKEY_TMARGIN:
fputs("tmargin", fp);
break;
case GPKEY_BMARGIN:
fputs("bmargin", fp);
break;
case GPKEY_LMARGIN:
fputs("lmargin", fp);
break;
case GPKEY_RMARGIN:
fputs("rmargin", fp);
break;
}
break;
case GPKEY_USER_PLACEMENT:
fputs("at ", fp);
save_position(fp, &key->user_pos, FALSE);
break;
}
if (!(key->region == GPKEY_AUTO_EXTERIOR_MARGIN
&& (key->margin == GPKEY_LMARGIN || key->margin == GPKEY_RMARGIN))) {
switch (key->hpos) {
case RIGHT:
fputs(" right", fp);
break;
case LEFT:
fputs(" left", fp);
break;
case CENTRE:
fputs(" center", fp);
break;
}
}
if (!(key->region == GPKEY_AUTO_EXTERIOR_MARGIN
&& (key->margin == GPKEY_TMARGIN || key->margin == GPKEY_BMARGIN))) {
switch (key->vpos) {
case JUST_TOP:
fputs(" top", fp);
break;
case JUST_BOT:
fputs(" bottom", fp);
break;
case JUST_CENTRE:
fputs(" center", fp);
break;
}
}
fprintf(fp, " %s %s %sreverse %senhanced %s ",
key->stack_dir == GPKEY_VERTICAL ? "vertical" : "horizontal",
key->just == GPKEY_LEFT ? "Left" : "Right",
key->reverse ? "" : "no",
key->enhanced ? "" : "no",
key->auto_titles == COLUMNHEAD_KEYTITLES ? "autotitles columnhead"
: key->auto_titles == FILENAME_KEYTITLES ? "autotitles"
: "noautotitles" );
if (key->box.l_type > LT_NODRAW) {
fputs("box", fp);
save_linetype(fp, &(key->box), FALSE);
} else
fputs("nobox", fp);
/* Put less common options on separate lines */
fprintf(fp, "\nset key %sinvert samplen %g spacing %g width %g height %g ",
key->invert ? "" : "no",
key->swidth, key->vert_factor, key->width_fix, key->height_fix);
fprintf(fp, "\nset key maxcolumns %d maxrows %d",key->maxcols,key->maxrows);
fputc('\n', fp);
fprintf(fp, "set key %sopaque\n", key->front ? "" : "no");
if (!(key->visible))
fputs("unset key\n", fp);
fputs("unset label\n", fp);
for (this_label = first_label; this_label != NULL;
this_label = this_label->next) {
fprintf(fp, "set label %d \"%s\" at ",
this_label->tag,
conv_text(this_label->text));
save_position(fp, &this_label->place, FALSE);
switch (this_label->pos) {
case LEFT:
fputs(" left", fp);
break;
case CENTRE:
fputs(" centre", fp);
break;
case RIGHT:
fputs(" right", fp);
break;
}
if (this_label->rotate)
fprintf(fp, " rotate by %d", this_label->rotate);
else
fprintf(fp, " norotate");
if (this_label->font != NULL)
fprintf(fp, " font \"%s\"", this_label->font);
fprintf(fp, " %s", (this_label->layer==0) ? "back" : "front");
if (this_label->noenhanced)
fprintf(fp, " noenhanced");
save_textcolor(fp, &(this_label->textcolor));
if (this_label->lp_properties.pointflag == 0)
fprintf(fp, " nopoint");
else {
fprintf(fp, " point");
save_linetype(fp, &(this_label->lp_properties), TRUE);
}
save_position(fp, &this_label->offset, TRUE);
fputc('\n', fp);
}
fputs("unset arrow\n", fp);
for (this_arrow = first_arrow; this_arrow != NULL;
this_arrow = this_arrow->next) {
fprintf(fp, "set arrow %d from ", this_arrow->tag);
save_position(fp, &this_arrow->start, FALSE);
fputs(this_arrow->relative ? " rto " : " to ", fp);
save_position(fp, &this_arrow->end, FALSE);
fprintf(fp, " %s %s %s",
arrow_head_names[this_arrow->arrow_properties.head],
(this_arrow->arrow_properties.layer==0) ? "back" : "front",
( (this_arrow->arrow_properties.head_filled==2) ? "filled" :
( (this_arrow->arrow_properties.head_filled==1) ? "empty" :
"nofilled" )) );
save_linetype(fp, &(this_arrow->arrow_properties.lp_properties), FALSE);
if (this_arrow->arrow_properties.head_length > 0) {
static char *msg[] = {"first", "second", "graph", "screen",
"character"};
fprintf(fp, " size %s %.3f,%.3f,%.3f",
msg[this_arrow->arrow_properties.head_lengthunit],
this_arrow->arrow_properties.head_length,
this_arrow->arrow_properties.head_angle,
this_arrow->arrow_properties.head_backangle);
}
fprintf(fp, "\n");
}
fprintf(fp, "set style increment %s\n", prefer_line_styles ? "userstyles" : "default");
fputs("unset style line\n", fp);
for (this_linestyle = first_linestyle; this_linestyle != NULL;
this_linestyle = this_linestyle->next) {
fprintf(fp, "set style line %d ", this_linestyle->tag);
save_linetype(fp, &(this_linestyle->lp_properties), TRUE);
fprintf(fp, "\n");
}
fputs("unset style arrow\n", fp);
for (this_arrowstyle = first_arrowstyle; this_arrowstyle != NULL;
this_arrowstyle = this_arrowstyle->next) {
fprintf(fp, "set style arrow %d", this_arrowstyle->tag);
fprintf(fp, " %s %s %s",
arrow_head_names[this_arrowstyle->arrow_properties.head],
(this_arrowstyle->arrow_properties.layer==0)?"back":"front",
( (this_arrowstyle->arrow_properties.head_filled==2)?"filled":
( (this_arrowstyle->arrow_properties.head_filled==1)?"empty":
"nofilled" )) );
save_linetype(fp, &(this_arrowstyle->arrow_properties.lp_properties), FALSE);
if (this_arrowstyle->arrow_properties.head_length > 0) {
static char *msg[] = {"first", "second", "graph", "screen",
"character"};
fprintf(fp, " size %s %.3f,%.3f,%.3f",
msg[this_arrowstyle->arrow_properties.head_lengthunit],
this_arrowstyle->arrow_properties.head_length,
this_arrowstyle->arrow_properties.head_angle,
this_arrowstyle->arrow_properties.head_backangle);
}
fprintf(fp, "\n");
}
fprintf(fp, "set style histogram ");
switch (histogram_opts.type) {
default:
case HT_CLUSTERED:
fprintf(fp,"clustered gap %d ",histogram_opts.gap); break;
case HT_ERRORBARS:
fprintf(fp,"errorbars gap %d lw %g",histogram_opts.gap,histogram_opts.bar_lw); break;
case HT_STACKED_IN_LAYERS:
fprintf(fp,"rowstacked "); break;
case HT_STACKED_IN_TOWERS:
fprintf(fp,"columnstacked "); break;
}
fprintf(fp,"title ");
save_position(fp, &histogram_opts.title.offset, TRUE);
fprintf(fp, "\n");
#ifdef EAM_OBJECTS
save_object(fp, 0);
#endif
fputs("unset logscale\n", fp);
#define SAVE_LOG(axis) \
if (axis_array[axis].log) \
fprintf(fp, "set logscale %s %g\n", axis_defaults[axis].name, \
axis_array[axis].base);
SAVE_LOG(FIRST_X_AXIS );
SAVE_LOG(FIRST_Y_AXIS );
SAVE_LOG(SECOND_X_AXIS);
SAVE_LOG(SECOND_Y_AXIS);
SAVE_LOG(FIRST_Z_AXIS );
SAVE_LOG(COLOR_AXIS );
SAVE_LOG(POLAR_AXIS );
#undef SAVE_LOG
save_offsets(fp, "set offsets");
/* FIXME */
fprintf(fp, "\
set pointsize %g\n\
set pointintervalbox %g\n\
set encoding %s\n\
%sset polar\n\
%sset parametric\n",
pointsize, pointintervalbox,
encoding_names[encoding],
(polar) ? "" : "un",
(parametric) ? "" : "un");
if (numeric_locale)
fprintf(fp, "set decimalsign locale \"%s\"\n", numeric_locale);
if (decimalsign != NULL)
fprintf(fp, "set decimalsign '%s'\n", decimalsign);
if (!numeric_locale && !decimalsign)
fprintf(fp, "unset decimalsign\n");
fputs("set view ", fp);
if (splot_map == TRUE)
fputs("map", fp);
else {
fprintf(fp, "%g, %g, %g, %g",
surface_rot_x, surface_rot_z, surface_scale, surface_zscale);
}
if (aspect_ratio_3D)
fprintf(fp, "\nset view %s", aspect_ratio_3D == 2 ? "equal xy" :
aspect_ratio_3D == 3 ? "equal xyz": "");
fprintf(fp, "\n\
set samples %d, %d\n\
set isosamples %d, %d\n\
%sset surface\n\
%sset contour",
samples_1, samples_2,
iso_samples_1, iso_samples_2,
(draw_surface) ? "" : "un",
(draw_contour) ? "" : "un");
switch (draw_contour) {
case CONTOUR_NONE:
fputc('\n', fp);
break;
case CONTOUR_BASE:
fputs(" base\n", fp);
break;
case CONTOUR_SRF:
fputs(" surface\n", fp);
break;
case CONTOUR_BOTH:
fputs(" both\n", fp);
break;
}
if (label_contours)
fprintf(fp, "set clabel '%s'\n", contour_format);
else
fputs("unset clabel\n", fp);
#ifdef GP_MACROS
if (expand_macros)
fputs("set macros\n", fp);
#endif
fputs("set mapping ", fp);
switch (mapping3d) {
case MAP3D_SPHERICAL:
fputs("spherical\n", fp);
break;
case MAP3D_CYLINDRICAL:
fputs("cylindrical\n", fp);
break;
case MAP3D_CARTESIAN:
default:
fputs("cartesian\n", fp);
break;
}
if (missing_val != NULL)
fprintf(fp, "set datafile missing '%s'\n", missing_val);
if (df_separator != '\0')
fprintf(fp, "set datafile separator \"%c\"\n",df_separator);
else
fprintf(fp, "set datafile separator whitespace\n");
if (strcmp(df_commentschars, DEFAULT_COMMENTS_CHARS))
fprintf(fp, "set datafile commentschars '%s'\n", df_commentschars);
if (df_fortran_constants)
fprintf(fp, "set datafile fortran\n");
if (df_nofpe_trap)
fprintf(fp, "set datafile nofpe_trap\n");
save_hidden3doptions(fp);
fprintf(fp, "set cntrparam order %d\n", contour_order);
fputs("set cntrparam ", fp);
switch (contour_kind) {
case CONTOUR_KIND_LINEAR:
fputs("linear\n", fp);
break;
case CONTOUR_KIND_CUBIC_SPL:
fputs("cubicspline\n", fp);
break;
case CONTOUR_KIND_BSPLINE:
fputs("bspline\n", fp);
break;
}
fputs("set cntrparam levels ", fp);
switch (contour_levels_kind) {
case LEVELS_AUTO:
fprintf(fp, "auto %d\n", contour_levels);
break;
case LEVELS_INCREMENTAL:
fprintf(fp, "incremental %g,%g,%g\n",
contour_levels_list[0], contour_levels_list[1],
contour_levels_list[0] + contour_levels_list[1] * contour_levels);
break;
case LEVELS_DISCRETE:
{
int i;
fprintf(fp, "discrete %g", contour_levels_list[0]);
for (i = 1; i < contour_levels; i++)
fprintf(fp, ",%g ", contour_levels_list[i]);
fputc('\n', fp);
}
}
fprintf(fp, "\
set cntrparam points %d\n\
set size ratio %g %g,%g\n\
set origin %g,%g\n",
contour_pts,
aspect_ratio, xsize, ysize,
xoffset, yoffset);
fprintf(fp, "set style data ");
save_data_func_style(fp,"data",data_style);
fprintf(fp, "set style function ");
save_data_func_style(fp,"function",func_style);
save_zeroaxis(fp, FIRST_X_AXIS);
save_zeroaxis(fp, FIRST_Y_AXIS);
save_zeroaxis(fp, FIRST_Z_AXIS);
save_zeroaxis(fp, SECOND_X_AXIS);
save_zeroaxis(fp, SECOND_Y_AXIS);
if (xyplane.absolute)
fprintf(fp, "set xyplane at %g\n", xyplane.z);
else
fprintf(fp, "set ticslevel %g\n", xyplane.z);
#define SAVE_MINI(axis) \
switch(axis_array[axis].minitics & TICS_MASK) { \
case 0: \
fprintf(fp, "set nom%stics\n", axis_defaults[axis].name); \
break; \
case MINI_AUTO: \
fprintf(fp, "set m%stics\n", axis_defaults[axis].name); \
break; \
case MINI_DEFAULT: \
fprintf(fp, "set m%stics default\n", axis_defaults[axis].name); \
break; \
case MINI_USER: \
fprintf(fp, "set m%stics %f\n", axis_defaults[axis].name, \
axis_array[axis].mtic_freq); \
break; \
}
SAVE_MINI(FIRST_X_AXIS);
SAVE_MINI(FIRST_Y_AXIS);
SAVE_MINI(FIRST_Z_AXIS); /* HBB 20000506: noticed mztics were not saved! */
SAVE_MINI(SECOND_X_AXIS);
SAVE_MINI(SECOND_Y_AXIS);
SAVE_MINI(COLOR_AXIS);
#undef SAVE_MINI
save_tics(fp, FIRST_X_AXIS);
save_tics(fp, FIRST_Y_AXIS);
save_tics(fp, FIRST_Z_AXIS);
save_tics(fp, SECOND_X_AXIS);
save_tics(fp, SECOND_Y_AXIS);
save_tics(fp, COLOR_AXIS);
save_tics(fp, POLAR_AXIS);
#define SAVE_AXISLABEL_OR_TITLE(name,suffix,lab) \
{ \
fprintf(fp, "set %s%s \"%s\" ", \
name, suffix, lab.text ? conv_text(lab.text) : ""); \
fprintf(fp, "\nset %s%s ", name, suffix); \
save_position(fp, &(lab.offset), TRUE); \
fprintf(fp, " font \"%s\"", lab.font ? conv_text(lab.font) : "");\
save_textcolor(fp, &(lab.textcolor)); \
if (lab.tag == ROTATE_IN_3D_LABEL_TAG) \
fprintf(fp, " rotate parallel"); \
if (lab.rotate) \
fprintf(fp, " rotate by %d", lab.rotate); \
else \
fprintf(fp, " norotate"); \
fprintf(fp, "%s\n", (lab.noenhanced) ? " noenhanced" : ""); \
}
SAVE_AXISLABEL_OR_TITLE("", "title", title);
/* FIXME */
fprintf(fp, "set timestamp %s \n", timelabel_bottom ? "bottom" : "top");
SAVE_AXISLABEL_OR_TITLE("", "timestamp", timelabel);
save_range(fp, POLAR_AXIS);
save_range(fp, T_AXIS);
save_range(fp, U_AXIS);
save_range(fp, V_AXIS);
#define SAVE_AXISLABEL(axis) \
SAVE_AXISLABEL_OR_TITLE(axis_defaults[axis].name,"label", \
axis_array[axis].label)
SAVE_AXISLABEL(FIRST_X_AXIS);
SAVE_AXISLABEL(SECOND_X_AXIS);
save_range(fp, FIRST_X_AXIS);
save_range(fp, SECOND_X_AXIS);
SAVE_AXISLABEL(FIRST_Y_AXIS);
SAVE_AXISLABEL(SECOND_Y_AXIS);
if (splot_map == FALSE) {
save_range(fp, FIRST_Y_AXIS);
save_range(fp, SECOND_Y_AXIS);
} else { /* 'set view map' uses flipped y-axes */
splot_map_deactivate();
save_range(fp, FIRST_Y_AXIS);
save_range(fp, SECOND_Y_AXIS);
splot_map_activate();
}
SAVE_AXISLABEL(FIRST_Z_AXIS);
save_range(fp, FIRST_Z_AXIS);
SAVE_AXISLABEL(COLOR_AXIS);
save_range(fp, COLOR_AXIS);
#undef SAVE_AXISLABEL
#undef SAVE_AXISLABEL_OR_TITLE
fprintf(fp, "set zero %g\n", zero);
fprintf(fp, "set lmargin %s %g\n",
lmargin.scalex == screen ? "at screen" : "", lmargin.x);
fprintf(fp, "set bmargin %s %g\n",
bmargin.scalex == screen ? "at screen" : "", bmargin.x);
fprintf(fp, "set rmargin %s %g\n",
rmargin.scalex == screen ? "at screen" : "", rmargin.x);
fprintf(fp, "set tmargin %s %g\n",
tmargin.scalex == screen ? "at screen" : "", tmargin.x);
fprintf(fp, "set locale \"%s\"\n", get_time_locale());
fputs("set pm3d ", fp);
fputs((PM3D_IMPLICIT == pm3d.implicit ? "implicit" : "explicit"), fp);
fprintf(fp, " at %s\n", pm3d.where);
fputs("set pm3d ", fp);
switch (pm3d.direction) {
case PM3D_SCANS_AUTOMATIC: fputs("scansautomatic\n", fp); break;
case PM3D_SCANS_FORWARD: fputs("scansforward\n", fp); break;
case PM3D_SCANS_BACKWARD: fputs("scansbackward\n", fp); break;
case PM3D_DEPTH: fputs("depthorder\n", fp); break;
}
fprintf(fp, "set pm3d interpolate %d,%d", pm3d.interp_i, pm3d.interp_j);
fputs(" flush ", fp);
switch (pm3d.flush) {
case PM3D_FLUSH_CENTER: fputs("center", fp); break;
case PM3D_FLUSH_BEGIN: fputs("begin", fp); break;
case PM3D_FLUSH_END: fputs("end", fp); break;
}
fputs((pm3d.ftriangles ? " " : " no"), fp);
fputs("ftriangles", fp);
if (pm3d.hidden3d_tag > 0) fprintf(fp," hidden3d %d", pm3d.hidden3d_tag);
else fputs(pm3d.hidden3d_tag ? " hidden3d" : " nohidden3d", fp);
fputs(" corners2color ", fp);
switch (pm3d.which_corner_color) {
case PM3D_WHICHCORNER_MEAN: fputs("mean", fp); break;
case PM3D_WHICHCORNER_GEOMEAN: fputs("geomean", fp); break;
case PM3D_WHICHCORNER_MEDIAN: fputs("median", fp); break;
case PM3D_WHICHCORNER_MIN: fputs("min", fp); break;
case PM3D_WHICHCORNER_MAX: fputs("max", fp); break;
default: /* PM3D_WHICHCORNER_C1 ... _C4 */
fprintf(fp, "c%i", pm3d.which_corner_color - PM3D_WHICHCORNER_C1 + 1);
}
fputs("\n", fp);
/*
* Save palette information
*/
fprintf( fp, "set palette %s %s maxcolors %d ",
sm_palette.positive==SMPAL_POSITIVE ? "positive" : "negative",
sm_palette.ps_allcF ? "ps_allcF" : "nops_allcF",
sm_palette.use_maxcolors);
fprintf( fp, "gamma %g ", sm_palette.gamma );
if (sm_palette.colorMode == SMPAL_COLOR_MODE_GRAY) {
fputs( "gray\n", fp );
}
else {
fputs( "color model ", fp );
switch( sm_palette.cmodel ) {
case C_MODEL_RGB: fputs( "RGB ", fp ); break;
case C_MODEL_HSV: fputs( "HSV ", fp ); break;
case C_MODEL_CMY: fputs( "CMY ", fp ); break;
case C_MODEL_YIQ: fputs( "YIQ ", fp ); break;
case C_MODEL_XYZ: fputs( "XYZ ", fp ); break;
default:
fprintf( stderr, "%s:%d ooops: Unknown color model '%c'.\n",
__FILE__, __LINE__, (char)(sm_palette.cmodel) );
}
fputs( "\nset palette ", fp );
switch( sm_palette.colorMode ) {
case SMPAL_COLOR_MODE_RGB:
fprintf( fp, "rgbformulae %d, %d, %d\n", sm_palette.formulaR,
sm_palette.formulaG, sm_palette.formulaB );
break;
case SMPAL_COLOR_MODE_GRADIENT: {
int i=0;
fprintf( fp, "defined (" );
for( i=0; i<sm_palette.gradient_num; ++i ) {
fprintf( fp, " %.4g %.4g %.4g %.4g", sm_palette.gradient[i].pos,
sm_palette.gradient[i].col.r, sm_palette.gradient[i].col.g,
sm_palette.gradient[i].col.b );
if (i<sm_palette.gradient_num-1) {
fputs( ",", fp);
if (i==2 || i%4==2) fputs( "\\\n ", fp );
}
}
fputs( " )\n", fp );
break;
}
case SMPAL_COLOR_MODE_FUNCTIONS:
fprintf( fp, "functions %s, %s, %s\n", sm_palette.Afunc.definition,
sm_palette.Bfunc.definition, sm_palette.Cfunc.definition );
break;
case SMPAL_COLOR_MODE_CUBEHELIX:
fprintf( fp, "cubehelix start %.2g cycles %.2g saturation %.2g\n",
sm_palette.cubehelix_start, sm_palette.cubehelix_cycles,
sm_palette.cubehelix_saturation);
break;
default:
fprintf( stderr, "%s:%d ooops: Unknown color mode '%c'.\n",
__FILE__, __LINE__, (char)(sm_palette.colorMode) );
}
}
/*
* Save colorbox info
*/
if (color_box.where != SMCOLOR_BOX_NO)
fprintf(fp,"set colorbox %s\n", color_box.where==SMCOLOR_BOX_DEFAULT ? "default" : "user");
fprintf(fp, "set colorbox %sal origin ", color_box.rotation == 'v' ? "vertic" : "horizont");
save_position(fp, &color_box.origin, FALSE);
fputs(" size ", fp);
save_position(fp, &color_box.size, FALSE);
fprintf(fp, " %s ", color_box.layer == LAYER_FRONT ? "front" : "back");
if (color_box.border == 0) fputs("noborder", fp);
else if (color_box.border_lt_tag < 0) fputs("bdefault", fp);
else fprintf(fp, "border %d", color_box.border_lt_tag);
if (color_box.where == SMCOLOR_BOX_NO) fputs("\nunset colorbox\n", fp);
else fputs("\n", fp);
fprintf(fp, "set style boxplot %s %s %5.2f %soutliers pt %d separation %g labels %s %ssorted\n",
boxplot_opts.plotstyle == FINANCEBARS ? "financebars" : "candles",
boxplot_opts.limit_type == 1 ? "fraction" : "range",
boxplot_opts.limit_value,
boxplot_opts.outliers ? "" : "no",
boxplot_opts.pointtype+1,
boxplot_opts.separation,
(boxplot_opts.labels == BOXPLOT_FACTOR_LABELS_X) ? "x" :
(boxplot_opts.labels == BOXPLOT_FACTOR_LABELS_X2) ? "x2" :
(boxplot_opts.labels == BOXPLOT_FACTOR_LABELS_AUTO) ? "auto" :"off",
boxplot_opts.sort_factors ? "" : "un");
fputs("set loadpath ", fp);
{
char *s;
while ((s = save_loadpath()) != NULL)
fprintf(fp, "\"%s\" ", s);
fputc('\n', fp);
}
fputs("set fontpath ", fp);
{
char *s;
while ((s = save_fontpath()) != NULL)
fprintf(fp, "\"%s\" ", s);
fputc('\n', fp);
}
if (PS_psdir)
fprintf(fp, "set psdir \"%s\"\n", PS_psdir);
else
fprintf(fp, "set psdir\n");
fprintf(fp, "set fit");
if (fitlogfile)
fprintf(fp, " logfile \'%s\'", fitlogfile);
fprintf(fp, " %serrorvariables",
fit_errorvariables ? "" : "no");
fprintf(fp, " %sprescale", fit_prescale ? "" : "no");
fputc('\n', fp);
}