Ejemplo n.º 1
0
static int scmi_power_attributes_get(const struct scmi_handle *handle,
				     struct scmi_power_info *pi)
{
	int ret;
	struct scmi_xfer *t;
	struct scmi_msg_resp_power_attributes *attr;

	ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
				 SCMI_PROTOCOL_POWER, 0, sizeof(*attr), &t);
	if (ret)
		return ret;

	attr = t->rx.buf;

	ret = scmi_do_xfer(handle, t);
	if (!ret) {
		pi->num_domains = le16_to_cpu(attr->num_domains);
		pi->stats_addr = le32_to_cpu(attr->stats_addr_low) |
				(u64)le32_to_cpu(attr->stats_addr_high) << 32;
		pi->stats_size = le32_to_cpu(attr->stats_size);
	}

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 2
0
static int
scmi_power_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
				 struct power_dom_info *dom_info)
{
	int ret;
	struct scmi_xfer *t;
	struct scmi_msg_resp_power_domain_attributes *attr;

	ret = scmi_xfer_get_init(handle, POWER_DOMAIN_ATTRIBUTES,
				 SCMI_PROTOCOL_POWER, sizeof(domain),
				 sizeof(*attr), &t);
	if (ret)
		return ret;

	*(__le32 *)t->tx.buf = cpu_to_le32(domain);
	attr = t->rx.buf;

	ret = scmi_do_xfer(handle, t);
	if (!ret) {
		u32 flags = le32_to_cpu(attr->flags);

		dom_info->state_set_notify = SUPPORTS_STATE_SET_NOTIFY(flags);
		dom_info->state_set_async = SUPPORTS_STATE_SET_ASYNC(flags);
		dom_info->state_set_sync = SUPPORTS_STATE_SET_SYNC(flags);
		memcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
	}

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 3
0
static int scmi_sensor_reading_get(const struct scmi_handle *handle,
				   u32 sensor_id, bool async, u64 *value)
{
	int ret;
	struct scmi_xfer *t;
	struct scmi_msg_sensor_reading_get *sensor;

	ret = scmi_xfer_get_init(handle, SENSOR_READING_GET,
				 SCMI_PROTOCOL_SENSOR, sizeof(*sensor),
				 sizeof(u64), &t);
	if (ret)
		return ret;

	sensor = t->tx.buf;
	sensor->id = cpu_to_le32(sensor_id);
	sensor->flags = cpu_to_le32(async ? SENSOR_READ_ASYNC : 0);

	ret = scmi_do_xfer(handle, t);
	if (!ret) {
		__le32 *pval = t->rx.buf;

		*value = le32_to_cpu(*pval);
		*value |= (u64)le32_to_cpu(*(pval + 1)) << 32;
	}

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 4
0
static int scmi_sensor_attributes_get(const struct scmi_handle *handle,
				      struct sensors_info *si)
{
	int ret;
	struct scmi_xfer *t;
	struct scmi_msg_resp_sensor_attributes *attr;

	ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
				 SCMI_PROTOCOL_SENSOR, 0, sizeof(*attr), &t);
	if (ret)
		return ret;

	attr = t->rx.buf;

	ret = scmi_do_xfer(handle, t);
	if (!ret) {
		si->num_sensors = le16_to_cpu(attr->num_sensors);
		si->max_requests = attr->max_requests;
		si->reg_addr = le32_to_cpu(attr->reg_addr_low) |
				(u64)le32_to_cpu(attr->reg_addr_high) << 32;
		si->reg_size = le32_to_cpu(attr->reg_size);
	}

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 5
0
static int scmi_sensor_description_get(const struct scmi_handle *handle,
				       struct sensors_info *si)
{
	int ret, cnt;
	u32 desc_index = 0;
	u16 num_returned, num_remaining;
	struct scmi_xfer *t;
	struct scmi_msg_resp_sensor_description *buf;

	ret = scmi_xfer_get_init(handle, SENSOR_DESCRIPTION_GET,
				 SCMI_PROTOCOL_SENSOR, sizeof(__le32), 0, &t);
	if (ret)
		return ret;

	buf = t->rx.buf;

	do {
		/* Set the number of sensors to be skipped/already read */
		*(__le32 *)t->tx.buf = cpu_to_le32(desc_index);

		ret = scmi_do_xfer(handle, t);
		if (ret)
			break;

		num_returned = le16_to_cpu(buf->num_returned);
		num_remaining = le16_to_cpu(buf->num_remaining);

		if (desc_index + num_returned > si->num_sensors) {
			dev_err(handle->dev, "No. of sensors can't exceed %d",
				si->num_sensors);
			break;
		}

		for (cnt = 0; cnt < num_returned; cnt++) {
			u32 attrh;
			struct scmi_sensor_info *s;

			attrh = le32_to_cpu(buf->desc[cnt].attributes_high);
			s = &si->sensors[desc_index + cnt];
			s->id = le32_to_cpu(buf->desc[cnt].id);
			s->type = SENSOR_TYPE(attrh);
			strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
		}

		desc_index += num_returned;
		/*
		 * check for both returned and remaining to avoid infinite
		 * loop due to buggy firmware
		 */
	} while (num_returned && num_remaining);

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 6
0
static int
scmi_power_state_get(const struct scmi_handle *handle, u32 domain, u32 *state)
{
	int ret;
	struct scmi_xfer *t;

	ret = scmi_xfer_get_init(handle, POWER_STATE_GET, SCMI_PROTOCOL_POWER,
				 sizeof(u32), sizeof(u32), &t);
	if (ret)
		return ret;

	*(__le32 *)t->tx.buf = cpu_to_le32(domain);

	ret = scmi_do_xfer(handle, t);
	if (!ret)
		*state = le32_to_cpu(*(__le32 *)t->rx.buf);

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 7
0
static int
scmi_clock_config_set(const struct scmi_handle *handle, u32 clk_id, u32 config)
{
	int ret;
	struct scmi_xfer *t;
	struct scmi_clock_set_config *cfg;

	ret = scmi_xfer_get_init(handle, CLOCK_CONFIG_SET, SCMI_PROTOCOL_CLOCK,
				 sizeof(*cfg), 0, &t);
	if (ret)
		return ret;

	cfg = t->tx.buf;
	cfg->id = cpu_to_le32(clk_id);
	cfg->attributes = cpu_to_le32(config);

	ret = scmi_do_xfer(handle, t);

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 8
0
static int
scmi_power_state_set(const struct scmi_handle *handle, u32 domain, u32 state)
{
	int ret;
	struct scmi_xfer *t;
	struct scmi_power_set_state *st;

	ret = scmi_xfer_get_init(handle, POWER_STATE_SET, SCMI_PROTOCOL_POWER,
				 sizeof(*st), 0, &t);
	if (ret)
		return ret;

	st = t->tx.buf;
	st->flags = cpu_to_le32(0);
	st->domain = cpu_to_le32(domain);
	st->state = cpu_to_le32(state);

	ret = scmi_do_xfer(handle, t);

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 9
0
static int
scmi_sensor_configuration_set(const struct scmi_handle *handle, u32 sensor_id)
{
	int ret;
	u32 evt_cntl = BIT(0);
	struct scmi_xfer *t;
	struct scmi_msg_set_sensor_config *cfg;

	ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_SET,
				 SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t);
	if (ret)
		return ret;

	cfg = t->tx.buf;
	cfg->id = cpu_to_le32(sensor_id);
	cfg->event_control = cpu_to_le32(evt_cntl);

	ret = scmi_do_xfer(handle, t);

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 10
0
static int scmi_clock_protocol_attributes_get(const struct scmi_handle *handle,
					      struct clock_info *ci)
{
	int ret;
	struct scmi_xfer *t;
	struct scmi_msg_resp_clock_protocol_attributes *attr;

	ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
				 SCMI_PROTOCOL_CLOCK, 0, sizeof(*attr), &t);
	if (ret)
		return ret;

	attr = t->rx.buf;

	ret = scmi_do_xfer(handle, t);
	if (!ret) {
		ci->num_clocks = le16_to_cpu(attr->num_clocks);
		ci->max_async_req = attr->max_async_req;
	}

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 11
0
static int scmi_clock_rate_set(const struct scmi_handle *handle, u32 clk_id,
			       u32 config, u64 rate)
{
	int ret;
	struct scmi_xfer *t;
	struct scmi_clock_set_rate *cfg;

	ret = scmi_xfer_get_init(handle, CLOCK_RATE_SET, SCMI_PROTOCOL_CLOCK,
				 sizeof(*cfg), 0, &t);
	if (ret)
		return ret;

	cfg = t->tx.buf;
	cfg->flags = cpu_to_le32(config);
	cfg->id = cpu_to_le32(clk_id);
	cfg->value_low = cpu_to_le32(rate & 0xffffffff);
	cfg->value_high = cpu_to_le32(rate >> 32);

	ret = scmi_do_xfer(handle, t);

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 12
0
static int scmi_sensor_trip_point_set(const struct scmi_handle *handle,
				      u32 sensor_id, u8 trip_id, u64 trip_value)
{
	int ret;
	u32 evt_cntl = SENSOR_TP_BOTH;
	struct scmi_xfer *t;
	struct scmi_msg_set_sensor_trip_point *trip;

	ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_SET,
				 SCMI_PROTOCOL_SENSOR, sizeof(*trip), 0, &t);
	if (ret)
		return ret;

	trip = t->tx.buf;
	trip->id = cpu_to_le32(sensor_id);
	trip->event_control = cpu_to_le32(evt_cntl | SENSOR_TP_ID(trip_id));
	trip->value_low = cpu_to_le32(trip_value & 0xffffffff);
	trip->value_high = cpu_to_le32(trip_value >> 32);

	ret = scmi_do_xfer(handle, t);

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 13
0
static int scmi_clock_attributes_get(const struct scmi_handle *handle,
				     u32 clk_id, struct scmi_clock_info *clk)
{
	int ret;
	struct scmi_xfer *t;
	struct scmi_msg_resp_clock_attributes *attr;

	ret = scmi_xfer_get_init(handle, CLOCK_ATTRIBUTES, SCMI_PROTOCOL_CLOCK,
				 sizeof(clk_id), sizeof(*attr), &t);
	if (ret)
		return ret;

	*(__le32 *)t->tx.buf = cpu_to_le32(clk_id);
	attr = t->rx.buf;

	ret = scmi_do_xfer(handle, t);
	if (!ret)
		memcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
	else
		clk->name[0] = '\0';

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 14
0
static int
scmi_clock_rate_get(const struct scmi_handle *handle, u32 clk_id, u64 *value)
{
	int ret;
	struct scmi_xfer *t;

	ret = scmi_xfer_get_init(handle, CLOCK_RATE_GET, SCMI_PROTOCOL_CLOCK,
				 sizeof(__le32), sizeof(u64), &t);
	if (ret)
		return ret;

	*(__le32 *)t->tx.buf = cpu_to_le32(clk_id);

	ret = scmi_do_xfer(handle, t);
	if (!ret) {
		__le32 *pval = t->rx.buf;

		*value = le32_to_cpu(*pval);
		*value |= (u64)le32_to_cpu(*(pval + 1)) << 32;
	}

	scmi_xfer_put(handle, t);
	return ret;
}
Ejemplo n.º 15
0
static int
scmi_clock_describe_rates_get(const struct scmi_handle *handle, u32 clk_id,
			      struct scmi_clock_info *clk)
{
	u64 *rate;
	int ret, cnt;
	bool rate_discrete = false;
	u32 tot_rate_cnt = 0, rates_flag;
	u16 num_returned, num_remaining;
	struct scmi_xfer *t;
	struct scmi_msg_clock_describe_rates *clk_desc;
	struct scmi_msg_resp_clock_describe_rates *rlist;

	ret = scmi_xfer_get_init(handle, CLOCK_DESCRIBE_RATES,
				 SCMI_PROTOCOL_CLOCK, sizeof(*clk_desc), 0, &t);
	if (ret)
		return ret;

	clk_desc = t->tx.buf;
	rlist = t->rx.buf;

	do {
		clk_desc->id = cpu_to_le32(clk_id);
		/* Set the number of rates to be skipped/already read */
		clk_desc->rate_index = cpu_to_le32(tot_rate_cnt);

		ret = scmi_do_xfer(handle, t);
		if (ret)
			goto err;

		rates_flag = le32_to_cpu(rlist->num_rates_flags);
		num_remaining = NUM_REMAINING(rates_flag);
		rate_discrete = RATE_DISCRETE(rates_flag);
		num_returned = NUM_RETURNED(rates_flag);

		if (tot_rate_cnt + num_returned > SCMI_MAX_NUM_RATES) {
			dev_err(handle->dev, "No. of rates > MAX_NUM_RATES");
			break;
		}

		if (!rate_discrete) {
			clk->range.min_rate = RATE_TO_U64(rlist->rate[0]);
			clk->range.max_rate = RATE_TO_U64(rlist->rate[1]);
			clk->range.step_size = RATE_TO_U64(rlist->rate[2]);
			dev_dbg(handle->dev, "Min %llu Max %llu Step %llu Hz\n",
				clk->range.min_rate, clk->range.max_rate,
				clk->range.step_size);
			break;
		}

		rate = &clk->list.rates[tot_rate_cnt];
		for (cnt = 0; cnt < num_returned; cnt++, rate++) {
			*rate = RATE_TO_U64(rlist->rate[cnt]);
			dev_dbg(handle->dev, "Rate %llu Hz\n", *rate);
		}

		tot_rate_cnt += num_returned;
		/*
		 * check for both returned and remaining to avoid infinite
		 * loop due to buggy firmware
		 */
	} while (num_returned && num_remaining);

	if (rate_discrete)
		clk->list.num_rates = tot_rate_cnt;

err:
	scmi_xfer_put(handle, t);
	return ret;
}