// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // detect other processors
lapicinit(); // interrupt controller
seginit(); // segment descriptors
cprintf("\ncpu%d: starting xv6\n\n", cpunum());
picinit(); // another interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // console hardware
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
mpmain(); // finish this processor's setup
init_semaphores_on_boot();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit(mpbcpu());
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
iinit(); // inode cache
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors (must come before kinit)
kinit(); // initialize memory allocator
userinit(); // first user process (must come after kinit)
// Finish setting up this processor in mpmain.
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator // kmem. freelist added
cprintf("%x \n", end);
kvmalloc(); // kernel page table
#ifdef CONFIG_MULTI_PROCESS
mpinit(); // collect info about this machine
#endif
lapicinit();
seginit(); // set up segments
picinit(); // interrupt controller: Programmable Interrupt Controller
#ifdef CONFIG_MULTI_PROCESS
ioapicinit(); // another interrupt controller
#endif
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
iinit(); // inode cache
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
#ifdef CONFIG_MULTI_PROCESS
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
#endif
userinit(); // first user process
// Finish setting up this processor in mpmain.
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
monitor_clear ();
// Print basic system information.
cprintf ("Ensidia\n\n");
cprintf ("Copyright (c) 2013-2014 Fotis Koutoulakis\n");
cprintf ("Based on xv6 by Russ Cox et al, at MIT CSAIL\n");
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("\ncpu%d: starting xng kernel\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
iinit(); // inode cache
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
// Finish setting up this processor in mpmain.
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
unsigned char FB[]="MESSAGE WRITTEN THROUGH FRAMEBUFFER!!";
fb_init(); // initialize framebuffer device (2015.11.02)
cprintf("\nUsing Framebuffer still presents some problems :(\n\n");
cprintf("\nSuggestion: review the way it is used in console.c\n\n");
fb_write(FB, sizeof(FB)); // Framebuffer maybe could be used before this moment (2015.11.02)
see_mylock(MYLOCK);
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
// Finish setting up this processor in mpmain.
mpmain();
}
/*int main(void){*/
void kmain(void){
// vga_init();
// puts((uint8_t*)"Hello kernel world!\n");
/*do some work here, like initialize timer or paging*/
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
// gdt_descriptor();
// puts((uint8_t*)"GDT initialized...\n");
// idt_descriptor();
// puts((uint8_t*)"IDT initialized...\n");
// cprintf("IDT initialized...\n");
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
// Finish setting up this processor in mpmain.
mpmain();
}
// Other CPUs jump here from entryother.S.
static void
mpenter(void)
{
switchkvm();
seginit();
lapicinit();
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
initGraphMode();
initDom();
tryOnce();
toggleOn();
pinit(); // process table
toggleOn();
tvinit(); // trap vectors
toggleOn();
binit(); // buffer cache
toggleOn();
fileinit(); // file table
toggleOn();
iinit(); // inode cache
toggleOn();
ideinit(); // disk
toggleOn();
if(!ismp)
timerinit(); // uniprocessor timer
toggleOn();
startothers(); // start other processors
toggleOn();
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
toggleOn();
txt_initLock();
mouseEnable();
initProcessMsgMap();
userinit(); // first user process
toggleOn();
endToggle();
// Finish setting up this processor in mpmain.
mpmain();
}
ASMLINK NORETURN
void
mpmain(struct cpu *cpu)
{
long unit = cpu->unit;
seginit(unit);
idtset();
m_atomwrite((m_atomic_t *)&cpu->flg, CPUSTARTED);
mpinitcpu(unit);
schedloop();
/* NOTREACHED */
for ( ; ; ) { ; }
}
ASMLINK
void
mpmain(struct m_cpu *cpu)
{
// gdtinit();
seginit(cpu->id);
idtset();
m_xchgl(&cpu->started, 1L);
/* TODO: initialise HPET; enable [rerouted] interrupts */
#if (HPET)
hpetinit();
apicinitcpu(cpu->id);
ioapicinit(cpu->id);
tssinit(cpu->id);
#endif
while (1) {
k_waitint();
}
}
// Os procedimentos de inicialização começam a executar o
// código .C a partir daqui.
// Aloca uma pilha real e troca para ela, primeiro fazendo
// algumas configurações necessárias par o alocador de memória funcionar.
int main(void) {
kinit1(end, P2V(4*1024*1024)); // alocador de páginas de memória física
kvmalloc(); // tabela de páginas do kernel
mpinit(); // detecta outros processadores
lapicinit(); // controlador de interrupções
seginit(); // descritores de segmentos
picinit(); // desabilita pic
ioapicinit(); // outro controlador de interrupções
consoleinit(); // console hardware
uartinit(); // porta serial
pinit(); // tabela de processos
tvinit(); // vetores trap
binit(); // buffer cache
fileinit(); // tabela de arquivo
ideinit(); // disco
startothers(); // inicia outros processadores
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // deve vir após startothers()
userinit(); // primeiro processo no modo usuário
mpmain(); // encerra esta configuração de processadores
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kinit1(end, P2V(4*1024*1024)); // phys page allocator
kvmalloc(); // kernel page table
mpinit(); // detect other processors
lapicinit(); // interrupt controller
seginit(); // segment descriptors
picinit(); // disable pic
ioapicinit(); // another interrupt controller
consoleinit(); // console hardware
uartinit(); // serial port
pinit(); // process table
shminit(); // shared memory
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
ideinit(); // disk
startothers(); // start other processors
kinit2(P2V(4*1024*1024), P2V(PHYSTOP)); // must come after startothers()
userinit(); // first user process
mpmain(); // finish this processor's setup
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
monitor_clear();
xylos_logo();
kinit1(end, P2V(4 * 1024 * 1024)); // phys page allocator, 16MB for kernel
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit();
seginit(); // set up segments
cprintf("Initializing interrupts... ");
init_generic_irq_table();
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
cprintf("Initializing console and serial... ");
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
cprintf("Setting up swap space disk... ");
swapinit();
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
cprintf("Initializing tasking... ");
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
cprintf("Initializing pipe IPC... ");
init_pipe_ipc_system();
if(pipe_ipc_sanitycheck() == 0) {
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
}
cprintf("Initializing direct IPC... ");
init_direct_ipc_table();
if(direct_ipc_sanitycheck() == 0) {
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
}
cprintf("Mounting root filesystem... ");
fileinit(); // file table
ideinit(); // disk
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
if(!ismp) {
cprintf("Starting up uniprocessor CPU... ");
timerinit(); // uniprocessor timer
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
}
if(ismp) {
if(ncpu > 1) {
cprintf("Starting up %d CPU cores... ", ncpu);
} else {
cprintf("Starting up %d CPU core... ", ncpu);
}
}
startothers(); // start other processors
kinit2(P2V(4 * 1024 * 1024), P2V(PHYSTOP)); // 16MB to PHYSTOP [234MB]
if(ismp) {
cprintf_color(COLOR_BLACK, COLOR_LIGHT_GREEN, false, "done\n");
}
// detects and starts km drivers
auto_enable_nic();
// first user process
userinit();
// Finish setting up this processor in mpmain.
mpmain();
}
void
procinit(int pid)
{
char *p;
Segment *s;
int n, m, sg, i;
ulong vastart, vaend;
char mfile[128], tfile[128], sfile[1024];
sprint(mfile, "/proc/%d/mem", pid);
sprint(tfile, "/proc/%d/text", pid);
sprint(sfile, "/proc/%d/segment", pid);
text = open(tfile, OREAD);
if(text < 0)
fatal(1, "open text %s", tfile);
inithdr(text);
sg = open(sfile, OREAD);
if(sg < 0)
fatal(1, "open text %s", sfile);
n = read(sg, sfile, sizeof(sfile));
if(n >= sizeof(sfile))
fatal(0, "segment file buffer too small");
close(sg);
m = open(mfile, OREAD);
if(m < 0)
fatal(1, "open %s", mfile);
initmap();
p = strstr(sfile, "Data");
if(p == 0)
fatal(0, "no data");
vastart = strtoul(p+9, 0, 16);
vaend = strtoul(p+18, 0, 16);
s = &memory.seg[Data];
if(s->base != vastart || s->end != vaend) {
s->base = vastart;
s->end = vaend;
free(s->table);
s->table = malloc(((s->end-s->base)/BY2PG)*sizeof(uchar*));
}
seginit(m, s, 0, vastart, vaend);
p = strstr(sfile, "Bss");
if(p == 0)
fatal(0, "no bss");
vastart = strtoul(p+9, 0, 16);
vaend = strtoul(p+18, 0, 16);
s = &memory.seg[Bss];
if(s->base != vastart || s->end != vaend) {
s->base = vastart;
s->end = vaend;
free(s->table);
s->table = malloc(((s->end-s->base)/BY2PG)*sizeof(uchar*));
}
seginit(m, s, 0, vastart, vaend);
reg.pc = greg(m, REGOFF(pc));
reg.r[1] = greg(m, REGOFF(sp));
reg.r[2] = greg(m, REGOFF(r2));
reg.r[30] = greg(m, REGOFF(r30));
reg.r[31] = greg(m, REGOFF(r31));
for(i = 0; i < 32; i++)
reg.r[i] = greg(m, roff[i-1]);
s = &memory.seg[Stack];
vastart = reg.r[1] & ~(BY2PG-1);
seginit(m, s, (vastart-s->base)/BY2PG, vastart, STACKTOP);
close(m);
Bprint(bioout, "qi\n");
}
