void
tel_leave_binary(int rw)
{
if (rw&1)
send_dont(TELOPT_BINARY, 1);
if (rw&2)
send_wont(TELOPT_BINARY, 1);
}
void
wontoption(int option)
{
if (do_dont_resp[option]) {
--do_dont_resp[option];
if (do_dont_resp[option] && my_state_is_dont(option))
--do_dont_resp[option];
}
if ((do_dont_resp[option] == 0) && my_want_state_is_do(option)) {
switch (option) {
#ifdef KLUDGELINEMODE
case TELOPT_SGA:
if (!kludgelinemode)
break;
/* FALL THROUGH */
#endif
case TELOPT_ECHO:
settimer(modenegotiated);
break;
case TELOPT_TM:
if (flushout)
flushout = 0;
set_my_want_state_dont(option);
set_my_state_dont(option);
return; /* Never reply to TM will's/wont's */
#ifdef ENCRYPTION
case TELOPT_ENCRYPT:
encrypt_not();
break;
#endif
default:
break;
}
set_my_want_state_dont(option);
if (my_state_is_do(option))
send_dont(option, 0);
setconnmode(0); /* Set new tty mode */
} else if (option == TELOPT_TM) {
/*
* Special case for TM.
*/
if (flushout)
flushout = 0;
set_my_want_state_dont(option);
}
set_my_state_dont(option);
}
static void
willoption(int option)
{
int new_state_ok = 0;
if (do_dont_resp[option]) {
--do_dont_resp[option];
if (do_dont_resp[option] && my_state_is_do(option))
--do_dont_resp[option];
}
if ((do_dont_resp[option] == 0) && my_want_state_is_dont(option)) {
switch (option) {
case TELOPT_ECHO:
case TELOPT_BINARY:
case TELOPT_SGA:
settimer(modenegotiated);
/* FALL THROUGH */
case TELOPT_STATUS:
new_state_ok = 1;
break;
case TELOPT_TM:
if (flushout)
flushout = 0;
/*
* Special case for TM. If we get back a WILL,
* pretend we got back a WONT.
*/
set_my_want_state_dont(option);
set_my_state_dont(option);
return; /* Never reply to TM will's/wont's */
case TELOPT_LINEMODE:
default:
break;
}
if (new_state_ok) {
set_my_want_state_do(option);
send_do(option, 0);
setconnmode(0); /* possibly set new tty mode */
} else {
do_dont_resp[option]++;
send_dont(option, 0);
}
}
set_my_state_do(option);
}
/*
* localstat
*
* This function handles all management of linemode.
*
* Linemode allows the client to do the local editing of data
* and send only complete lines to the server. Linemode state is
* based on the state of the pty driver. If the pty is set for
* external processing, then we can use linemode. Further, if we
* can use real linemode, then we can look at the edit control bits
* in the pty to determine what editing the client should do.
*
* Linemode support uses the following state flags to keep track of
* current and desired linemode state.
* alwayslinemode : true if -l was specified on the telnetd
* command line. It means to have linemode on as much as
* possible.
*
* lmodetype: signifies whether the client can
* handle real linemode, or if use of kludgeomatic linemode
* is preferred. It will be set to one of the following:
* REAL_LINEMODE : use linemode option
* NO_KLUDGE : don't initiate kludge linemode.
* KLUDGE_LINEMODE : use kludge linemode
* NO_LINEMODE : client is ignorant of linemode
*
* linemode, uselinemode : linemode is true if linemode
* is currently on, uselinemode is the state that we wish
* to be in. If another function wishes to turn linemode
* on or off, it sets or clears uselinemode.
*
* editmode, useeditmode : like linemode/uselinemode, but
* these contain the edit mode states (edit and trapsig).
*
* The state variables correspond to some of the state information
* in the pty.
* linemode:
* In real linemode, this corresponds to whether the pty
* expects external processing of incoming data.
* In kludge linemode, this more closely corresponds to the
* whether normal processing is on or not. (ICANON in
* system V, or COOKED mode in BSD.)
* If the -l option was specified (alwayslinemode), then
* an attempt is made to force external processing on at
* all times.
*
* The following heuristics are applied to determine linemode
* handling within the server.
* 1) Early on in starting up the server, an attempt is made
* to negotiate the linemode option. If this succeeds
* then lmodetype is set to REAL_LINEMODE and all linemode
* processing occurs in the context of the linemode option.
* 2) If the attempt to negotiate the linemode option failed,
* and the "-k" (don't initiate kludge linemode) isn't set,
* then we try to use kludge linemode. We test for this
* capability by sending "do Timing Mark". If a positive
* response comes back, then we assume that the client
* understands kludge linemode (ech!) and the
* lmodetype flag is set to KLUDGE_LINEMODE.
* 3) Otherwise, linemode is not supported at all and
* lmodetype remains set to NO_LINEMODE (which happens
* to be 0 for convenience).
* 4) At any time a command arrives that implies a higher
* state of linemode support in the client, we move to that
* linemode support.
*
* A short explanation of kludge linemode is in order here.
* 1) The heuristic to determine support for kludge linemode
* is to send a do timing mark. We assume that a client
* that supports timing marks also supports kludge linemode.
* A risky proposition at best.
* 2) Further negotiation of linemode is done by changing the
* the server's state regarding SGA. If server will SGA,
* then linemode is off, if server won't SGA, then linemode
* is on.
*/
void
localstat(void)
{
int need_will_echo = 0;
/*
* Check for changes to flow control if client supports it.
*/
flowstat();
/*
* Check linemode on/off state
*/
uselinemode = tty_linemode();
/*
* If alwayslinemode is on, and pty is changing to turn it off, then
* force linemode back on.
*/
if (alwayslinemode && linemode && !uselinemode) {
uselinemode = 1;
tty_setlinemode(uselinemode);
}
if (uselinemode) {
/*
* Check for state of BINARY options.
*
* We only need to do the binary dance if we are actually going
* to use linemode. As this confuses some telnet clients
* that don't support linemode, and doesn't gain us
* anything, we don't do it unless we're doing linemode.
* -Crh ([email protected])
*/
if (tty_isbinaryin()) {
if (his_want_state_is_wont(TELOPT_BINARY))
send_do(TELOPT_BINARY, 1);
} else {
if (his_want_state_is_will(TELOPT_BINARY))
send_dont(TELOPT_BINARY, 1);
}
if (tty_isbinaryout()) {
if (my_want_state_is_wont(TELOPT_BINARY))
send_will(TELOPT_BINARY, 1);
} else {
if (my_want_state_is_will(TELOPT_BINARY))
send_wont(TELOPT_BINARY, 1);
}
}
#ifdef ENCRYPTION
/*
* If the terminal is not echoing, but editing is enabled,
* something like password input is going to happen, so
* if we the other side is not currently sending encrypted
* data, ask the other side to start encrypting.
*/
if (his_state_is_will(TELOPT_ENCRYPT)) {
static int enc_passwd = 0;
if (uselinemode && !tty_isecho() && tty_isediting()
&& (enc_passwd == 0) && !decrypt_input) {
encrypt_send_request_start();
enc_passwd = 1;
} else if (enc_passwd) {
encrypt_send_request_end();
enc_passwd = 0;
}
}
#endif /* ENCRYPTION */
/*
* Do echo mode handling as soon as we know what the
* linemode is going to be.
* If the pty has echo turned off, then tell the client that
* the server will echo. If echo is on, then the server
* will echo if in character mode, but in linemode the
* client should do local echoing. The state machine will
* not send anything if it is unnecessary, so don't worry
* about that here.
*
* If we need to send the WILL ECHO (because echo is off),
* then delay that until after we have changed the MODE.
* This way, when the user is turning off both editing
* and echo, the client will get editing turned off first.
* This keeps the client from going into encryption mode
* and then right back out if it is doing auto-encryption
* when passwords are being typed.
*/
if (uselinemode) {
if (tty_isecho())
send_wont(TELOPT_ECHO, 1);
else
need_will_echo = 1;
#ifdef KLUDGELINEMODE
if (lmodetype == KLUDGE_OK)
lmodetype = KLUDGE_LINEMODE;
#endif
}
/*
* If linemode is being turned off, send appropriate
* command and then we're all done.
*/
if (!uselinemode && linemode) {
# ifdef KLUDGELINEMODE
if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
send_dont(TELOPT_LINEMODE, 1);
# ifdef KLUDGELINEMODE
} else if (lmodetype == KLUDGE_LINEMODE)
send_will(TELOPT_SGA, 1);
# endif /* KLUDGELINEMODE */
send_will(TELOPT_ECHO, 1);
linemode = uselinemode;
goto done;
}
# ifdef KLUDGELINEMODE
/*
* If using real linemode check edit modes for possible later use.
* If we are in kludge linemode, do the SGA negotiation.
*/
if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
useeditmode = 0;
if (tty_isediting())
useeditmode |= MODE_EDIT;
if (tty_istrapsig())
useeditmode |= MODE_TRAPSIG;
if (tty_issofttab())
useeditmode |= MODE_SOFT_TAB;
if (tty_islitecho())
useeditmode |= MODE_LIT_ECHO;
# ifdef KLUDGELINEMODE
} else if (lmodetype == KLUDGE_LINEMODE) {
if (tty_isediting() && uselinemode)
send_wont(TELOPT_SGA, 1);
else
send_will(TELOPT_SGA, 1);
}
# endif /* KLUDGELINEMODE */
/*
* Negotiate linemode on if pty state has changed to turn it on.
* Send appropriate command and send along edit mode, then all done.
*/
if (uselinemode && !linemode) {
# ifdef KLUDGELINEMODE
if (lmodetype == KLUDGE_LINEMODE) {
send_wont(TELOPT_SGA, 1);
} else if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
send_do(TELOPT_LINEMODE, 1);
/* send along edit modes */
output_data("%c%c%c%c%c%c%c", IAC, SB,
TELOPT_LINEMODE, LM_MODE, useeditmode,
IAC, SE);
editmode = useeditmode;
# ifdef KLUDGELINEMODE
}
# endif /* KLUDGELINEMODE */
linemode = uselinemode;
goto done;
}
# ifdef KLUDGELINEMODE
/*
* None of what follows is of any value if not using
* real linemode.
*/
if (lmodetype < REAL_LINEMODE)
goto done;
# endif /* KLUDGELINEMODE */
if (linemode && his_state_is_will(TELOPT_LINEMODE)) {
/*
* If edit mode changed, send edit mode.
*/
if (useeditmode != editmode) {
/*
* Send along appropriate edit mode mask.
*/
output_data("%c%c%c%c%c%c%c", IAC, SB,
TELOPT_LINEMODE, LM_MODE, useeditmode,
IAC, SE);
editmode = useeditmode;
}
/*
* Check for changes to special characters in use.
*/
start_slc(0);
check_slc();
(void) end_slc(0);
}
done:
if (need_will_echo)
send_will(TELOPT_ECHO, 1);
/*
* Some things should be deferred until after the pty state has
* been set by the local process. Do those things that have been
* deferred now. This only happens once.
*/
if (_terminit == 0) {
_terminit = 1;
defer_terminit();
}
netflush();
set_termbuf();
return;
} /* end of localstat */
void wontoption(int option) {
/*
* Process client input.
*/
DIAG(TD_OPTIONS, printoption("td: recv wont", option));
if (do_dont_resp[option]) {
do_dont_resp[option]--;
if (do_dont_resp[option] && his_state_is_wont(option))
do_dont_resp[option]--;
}
if (do_dont_resp[option] == 0) {
if (his_want_state_is_will(option)) {
/* it is always ok to change to negative state */
switch (option) {
case TELOPT_ECHO:
not42 = 1; /* doesn't seem to be a 4.2 system */
break;
case TELOPT_BINARY:
init_termbuf();
tty_binaryin(0);
set_termbuf();
break;
#ifdef LINEMODE
case TELOPT_LINEMODE:
#ifdef KLUDGELINEMODE
/*
* If real linemode is supported, then client is
* asking to turn linemode off.
*/
if (lmodetype != REAL_LINEMODE)
break;
lmodetype = KLUDGE_LINEMODE;
# endif /* KLUDGELINEMODE */
clientstat(TELOPT_LINEMODE, WONT, 0);
break;
#endif /* LINEMODE */
case TELOPT_TM:
/*
* If we get a WONT TM, and had sent a DO TM,
* don't respond with a DONT TM, just leave it
* as is. Short circut the state machine to
* achive this.
*/
set_his_want_state_wont(TELOPT_TM);
return;
case TELOPT_LFLOW:
/*
* If we are not going to support flow control
* option, then let peer know that we can't
* change the flow control characters.
*/
slctab[SLC_XON].defset.flag &= ~SLC_LEVELBITS;
slctab[SLC_XON].defset.flag |= SLC_CANTCHANGE;
slctab[SLC_XOFF].defset.flag &= ~SLC_LEVELBITS;
slctab[SLC_XOFF].defset.flag |= SLC_CANTCHANGE;
break;
#if defined(AUTHENTICATE)
case TELOPT_AUTHENTICATION:
auth_finished(0, AUTH_REJECT);
break;
#endif
/*
* For options that we might spin waiting for
* sub-negotiation, if the client turns off the
* option rather than responding to the request,
* we have to treat it here as if we got a response
* to the sub-negotiation, (by updating the timers)
* so that we'll break out of the loop.
*/
case TELOPT_TTYPE:
settimer(ttypesubopt);
break;
case TELOPT_TSPEED:
settimer(tspeedsubopt);
break;
case TELOPT_XDISPLOC:
settimer(xdisplocsubopt);
break;
case TELOPT_ENVIRON:
settimer(environsubopt);
break;
default:
break;
}
set_his_want_state_wont(option);
if (his_state_is_will(option)) send_dont(option, 0);
}
else {
switch (option) {
case TELOPT_TM:
#if defined(LINEMODE) && defined(KLUDGELINEMODE)
if (lmodetype < REAL_LINEMODE) {
lmodetype = NO_LINEMODE;
clientstat(TELOPT_LINEMODE, WONT, 0);
send_will(TELOPT_SGA, 1);
send_will(TELOPT_ECHO, 1);
}
#endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */
break;
#if defined(AUTHENTICATE)
case TELOPT_AUTHENTICATION:
auth_finished(0, AUTH_REJECT);
break;
#endif
default:
break;
}
}
}
} /* end of wontoption */
void willoption(int option) {
int changeok = 0;
void (*func)(void) = 0;
/*
* process input from peer.
*/
DIAG(TD_OPTIONS, printoption("td: recv will", option));
if (do_dont_resp[option]) {
do_dont_resp[option]--;
if (do_dont_resp[option] && his_state_is_will(option))
do_dont_resp[option]--;
}
if (do_dont_resp[option] == 0) {
if (his_want_state_is_wont(option)) {
switch (option) {
case TELOPT_BINARY:
init_termbuf();
tty_binaryin(1);
set_termbuf();
changeok++;
break;
case TELOPT_ECHO:
/*
* See comments below for more info.
*/
not42 = 0; /* looks like a 4.2 system */
break;
case TELOPT_TM:
#if defined(LINEMODE) && defined(KLUDGELINEMODE)
/*
* This telnetd implementation does not really
* support timing marks, it just uses them to
* support the kludge linemode stuff. If we
* receive a will or wont TM in response to our
* do TM request that may have been sent to
* determine kludge linemode support, process
* it, otherwise TM should get a negative
* response back.
*/
/*
* Handle the linemode kludge stuff.
* If we are not currently supporting any
* linemode at all, then we assume that this
* is the client telling us to use kludge
* linemode in response to our query. Set the
* linemode type that is to be supported, note
* that the client wishes to use linemode, and
* eat the will TM as though it never arrived.
*/
if (lmodetype < KLUDGE_LINEMODE) {
lmodetype = KLUDGE_LINEMODE;
clientstat(TELOPT_LINEMODE, WILL, 0);
send_wont(TELOPT_SGA, 1);
}
#endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */
/*
* We never respond to a WILL TM, and
* we leave the state WONT.
*/
return;
case TELOPT_LFLOW:
/*
* If we are going to support flow control
* option, then don't worry peer that we can't
* change the flow control characters.
*/
slctab[SLC_XON].defset.flag &= ~SLC_LEVELBITS;
slctab[SLC_XON].defset.flag |= SLC_DEFAULT;
slctab[SLC_XOFF].defset.flag &= ~SLC_LEVELBITS;
slctab[SLC_XOFF].defset.flag |= SLC_DEFAULT;
case TELOPT_TTYPE:
case TELOPT_SGA:
case TELOPT_NAWS:
case TELOPT_TSPEED:
case TELOPT_XDISPLOC:
case TELOPT_ENVIRON:
changeok++;
break;
#ifdef LINEMODE
case TELOPT_LINEMODE:
#ifdef KLUDGELINEMODE
/*
* Note client's desire to use linemode.
*/
lmodetype = REAL_LINEMODE;
#endif /* KLUDGELINEMODE */
func = doclientstat;
changeok++;
break;
#endif /* LINEMODE */
#ifdef AUTHENTICATE
case TELOPT_AUTHENTICATION:
func = auth_request;
changeok++;
break;
#endif
#ifdef ENCRYPT
case TELOPT_ENCRYPT:
func = encrypt_send_support;
changeok++;
break;
#endif
default:
break;
}
if (changeok) {
set_his_want_state_will(option);
send_do(option, 0);
}
else {
do_dont_resp[option]++;
send_dont(option, 0);
}
}
else {
/*
* Option processing that should happen when
* we receive conformation of a change in
* state that we had requested.
*/
switch (option) {
case TELOPT_ECHO:
not42 = 0; /* looks like a 4.2 system */
/*
* Egads, he responded "WILL ECHO". Turn
* it off right now!
*/
send_dont(option, 1);
/*
* "WILL ECHO". Kludge upon kludge!
* A 4.2 client is now echoing user input at
* the tty. This is probably undesireable and
* it should be stopped. The client will
* respond WONT TM to the DO TM that we send to
* check for kludge linemode. When the WONT TM
* arrives, linemode will be turned off and a
* change propogated to the pty. This change
* will cause us to process the new pty state
* in localstat(), which will notice that
* linemode is off and send a WILL ECHO
* so that we are properly in character mode and
* all is well.
*/
break;
#ifdef LINEMODE
case TELOPT_LINEMODE:
# ifdef KLUDGELINEMODE
/*
* Note client's desire to use linemode.
*/
lmodetype = REAL_LINEMODE;
# endif /* KLUDGELINEMODE */
func = doclientstat;
break;
#endif /* LINEMODE */
#ifdef AUTHENTICATE
case TELOPT_AUTHENTICATION:
func = auth_request;
break;
#endif
#ifdef ENCRYPT
case TELOPT_ENCRYPT:
func = encrypt_send_support;
break;
#endif
}
}
}
set_his_state_will(option);
if (func) (*func)();
}
/*
* localstat
*
* This function handles all management of linemode.
*
* Linemode allows the client to do the local editing of data
* and send only complete lines to the server. Linemode state is
* based on the state of the pty driver. If the pty is set for
* external processing, then we can use linemode. Further, if we
* can use real linemode, then we can look at the edit control bits
* in the pty to determine what editing the client should do.
*
* Linemode support uses the following state flags to keep track of
* current and desired linemode state.
* alwayslinemode : true if -l was specified on the telnetd
* command line. It means to have linemode on as much as
* possible.
*
* lmodetype: signifies whether the client can
* handle real linemode, or if use of kludgeomatic linemode
* is preferred. It will be set to one of the following:
* REAL_LINEMODE : use linemode option
* NO_KLUDGE : don't initiate kludge linemode.
* KLUDGE_LINEMODE : use kludge linemode
* NO_LINEMODE : client is ignorant of linemode
*
* linemode, uselinemode : linemode is true if linemode
* is currently on, uselinemode is the state that we wish
* to be in. If another function wishes to turn linemode
* on or off, it sets or clears uselinemode.
*
* editmode, useeditmode : like linemode/uselinemode, but
* these contain the edit mode states (edit and trapsig).
*
* The state variables correspond to some of the state information
* in the pty.
* linemode:
* In real linemode, this corresponds to whether the pty
* expects external processing of incoming data.
* In kludge linemode, this more closely corresponds to the
* whether normal processing is on or not. (ICANON in
* system V, or COOKED mode in BSD.)
* If the -l option was specified (alwayslinemode), then
* an attempt is made to force external processing on at
* all times.
*
* The following heuristics are applied to determine linemode
* handling within the server.
* 1) Early on in starting up the server, an attempt is made
* to negotiate the linemode option. If this succeeds
* then lmodetype is set to REAL_LINEMODE and all linemode
* processing occurs in the context of the linemode option.
* 2) If the attempt to negotiate the linemode option failed,
* and the "-k" (don't initiate kludge linemode) isn't set,
* then we try to use kludge linemode. We test for this
* capability by sending "do Timing Mark". If a positive
* response comes back, then we assume that the client
* understands kludge linemode (ech!) and the
* lmodetype flag is set to KLUDGE_LINEMODE.
* 3) Otherwise, linemode is not supported at all and
* lmodetype remains set to NO_LINEMODE (which happens
* to be 0 for convenience).
* 4) At any time a command arrives that implies a higher
* state of linemode support in the client, we move to that
* linemode support.
*
* A short explanation of kludge linemode is in order here.
* 1) The heuristic to determine support for kludge linemode
* is to send a do timing mark. We assume that a client
* that supports timing marks also supports kludge linemode.
* A risky proposition at best.
* 2) Further negotiation of linemode is done by changing the
* the server's state regarding SGA. If server will SGA,
* then linemode is off, if server won't SGA, then linemode
* is on.
*/
void
localstat()
{
int need_will_echo = 0;
#if defined(CRAY2) && defined(UNICOS5)
/*
* Keep track of that ol' CR/NL mapping while we're in the
* neighborhood.
*/
newmap = tty_isnewmap();
#endif /* defined(CRAY2) && defined(UNICOS5) */
/*
* Check for state of BINARY options.
*/
if (tty_isbinaryin()) {
if (his_want_state_is_wont(TELOPT_BINARY))
send_do(TELOPT_BINARY, 1);
} else {
if (his_want_state_is_will(TELOPT_BINARY))
send_dont(TELOPT_BINARY, 1);
}
if (tty_isbinaryout()) {
if (my_want_state_is_wont(TELOPT_BINARY))
send_will(TELOPT_BINARY, 1);
} else {
if (my_want_state_is_will(TELOPT_BINARY))
send_wont(TELOPT_BINARY, 1);
}
/*
* Check for changes to flow control if client supports it.
*/
flowstat();
/*
* Check linemode on/off state
*/
uselinemode = tty_linemode();
/*
* If alwayslinemode is on, and pty is changing to turn it off, then
* force linemode back on.
*/
if (alwayslinemode && linemode && !uselinemode) {
uselinemode = 1;
tty_setlinemode(uselinemode);
}
/*
* Do echo mode handling as soon as we know what the
* linemode is going to be.
* If the pty has echo turned off, then tell the client that
* the server will echo. If echo is on, then the server
* will echo if in character mode, but in linemode the
* client should do local echoing. The state machine will
* not send anything if it is unnecessary, so don't worry
* about that here.
*
* If we need to send the WILL ECHO (because echo is off),
* then delay that until after we have changed the MODE.
* This way, when the user is turning off both editing
* and echo, the client will get editing turned off first.
* This keeps the client from going into encryption mode
* and then right back out if it is doing auto-encryption
* when passwords are being typed.
*/
if (uselinemode) {
if (tty_isecho())
send_wont(TELOPT_ECHO, 1);
else
need_will_echo = 1;
#ifdef KLUDGELINEMODE
if (lmodetype == KLUDGE_OK)
lmodetype = KLUDGE_LINEMODE;
#endif
}
/*
* If linemode is being turned off, send appropriate
* command and then we're all done.
*/
if (!uselinemode && linemode) {
# ifdef KLUDGELINEMODE
if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
send_dont(TELOPT_LINEMODE, 1);
# ifdef KLUDGELINEMODE
} else if (lmodetype == KLUDGE_LINEMODE)
send_will(TELOPT_SGA, 1);
# endif /* KLUDGELINEMODE */
send_will(TELOPT_ECHO, 1);
linemode = uselinemode;
goto done;
}
# ifdef KLUDGELINEMODE
/*
* If using real linemode check edit modes for possible later use.
* If we are in kludge linemode, do the SGA negotiation.
*/
if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
useeditmode = 0;
if (tty_isediting())
useeditmode |= MODE_EDIT;
if (tty_istrapsig())
useeditmode |= MODE_TRAPSIG;
if (tty_issofttab())
useeditmode |= MODE_SOFT_TAB;
if (tty_islitecho())
useeditmode |= MODE_LIT_ECHO;
# ifdef KLUDGELINEMODE
} else if (lmodetype == KLUDGE_LINEMODE) {
if (tty_isediting() && uselinemode)
send_wont(TELOPT_SGA, 1);
else
send_will(TELOPT_SGA, 1);
}
# endif /* KLUDGELINEMODE */
/*
* Negotiate linemode on if pty state has changed to turn it on.
* Send appropriate command and send along edit mode, then all done.
*/
if (uselinemode && !linemode) {
# ifdef KLUDGELINEMODE
if (lmodetype == KLUDGE_LINEMODE) {
send_wont(TELOPT_SGA, 1);
} else if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
send_do(TELOPT_LINEMODE, 1);
/* send along edit modes */
(void) sprintf(nfrontp, "%c%c%c%c%c%c%c", IAC, SB,
TELOPT_LINEMODE, LM_MODE, useeditmode,
IAC, SE);
nfrontp += 7;
editmode = useeditmode;
# ifdef KLUDGELINEMODE
}
# endif /* KLUDGELINEMODE */
linemode = uselinemode;
goto done;
}
# ifdef KLUDGELINEMODE
/*
* None of what follows is of any value if not using
* real linemode.
*/
if (lmodetype < REAL_LINEMODE)
goto done;
# endif /* KLUDGELINEMODE */
if (linemode && his_state_is_will(TELOPT_LINEMODE)) {
/*
* If edit mode changed, send edit mode.
*/
if (useeditmode != editmode) {
/*
* Send along appropriate edit mode mask.
*/
(void) sprintf(nfrontp, "%c%c%c%c%c%c%c", IAC, SB,
TELOPT_LINEMODE, LM_MODE, useeditmode,
IAC, SE);
nfrontp += 7;
editmode = useeditmode;
}
/*
* Check for changes to special characters in use.
*/
start_slc(0);
check_slc();
(void) end_slc(0);
}
done:
if (need_will_echo)
send_will(TELOPT_ECHO, 1);
/*
* Some things should be deferred until after the pty state has
* been set by the local process. Do those things that have been
* deferred now. This only happens once.
*/
if (_terminit == 0) {
_terminit = 1;
defer_terminit();
}
netflush();
set_termbuf();
return;
} /* end of localstat */