bool ReceiveData::serialPortConnect()
{
serialPort->setPortName(SerialPortSettingModel::getInstance()->getPortName());
qDebug() << serialPort->portName();
serialPort->setBaudRate(SerialPortSettingModel::getInstance()->getBaudRate());
qDebug() << serialPort->baudRate();
serialPort->setDataBits(QSerialPort::Data8);
serialPort->setParity(QSerialPort::NoParity);
serialPort->setStopBits(QSerialPort::OneStop);
serialPort->setFlowControl(QSerialPort::NoFlowControl);
if(serialPort->open(QIODevice::ReadWrite))
{
connect(serialPort, SIGNAL(readyRead()), this, SLOT(serialReceived()));
qDebug() << "Opened";
return true;
}
else
{
return false;
qDebug() << "Could not open";
}
}
/*----------------------------------------------------------------------------*/
MeasureWindow::MeasureWindow(QWidget *parent) :
QMainWindow(parent),
ui(new Ui::MeasureWindow)
{
m_created = false;
ui->setupUi(this);
ui->profileCombo->addItems(config->profileList());
ui->profileCombo->setCurrentIndex(config->profileIndex());
m_created = true;
m_newMeasure = true;
onProfileChanged(config->profileIndex());
connect(database, SIGNAL(dbError(QString)), this, SLOT(onDatabaseError()));
connect(controller, SIGNAL(cmdSendError()), this, SLOT(onCmdSendError()));
connect(controller, SIGNAL(cmdSendOk()), this, SLOT(onCmdSendOk()));
connect(controller, SIGNAL(currentStretch(double)), this, SLOT(onCurrentStretch(double)));
connect(controller, SIGNAL(endOfMeasuring()), this, SLOT(onEndOfMeasuring()));
connect(controller, SIGNAL(measure(double,double,int)), this, SLOT(onMeasure(double,double,int)));
connect(controller, SIGNAL(nextCasseteRequest()), this, SLOT(onNextCasseteRequest()));
connect(controller, SIGNAL(noParticle()), this, SLOT(onNoParticle()));
connect(controller, SIGNAL(serialReceived(QString)), this, SLOT(onSerialReceived(QString)));
connect(controller, SIGNAL(statusChanged(int)), this, SLOT(onStatusChanged(int)));
connect(controller, SIGNAL(sizeReceived(double)), this, SLOT(onSizeReceived(double)));
connect(session, SIGNAL(sessionChanged()), this, SLOT(onSessionChanged()));
connect(session, SIGNAL(measureListChanged()), this, SLOT(onMeasureListChanged()));
ui->sessionBox->setSession(session);
measureModel = new MeasureModel(this);
ui->measureTable->setModel(measureModel);
//connect(session, SIGNAL(measureListChanged()), measureModel, SLOT(update()));
histogrammPlotter = new HistogrammPlotter();
// ui->currentHPlotWidget->setPlotter(histogrammPlotter);
curvePlotter = new CurvePlotter();
curvePlotter->x.setShowValues(false);
curvePlotter->x.setText(tr("[s]"));
curvePlotter->x.setDecimals(0);
curvePlotter->x.setSteps(3);
curvePlotter->x.setMax(3000);
curvePlotter->y.setShowValues(true);
curvePlotter->y.setText(tr("[N]"));
curvePlotter->y.setDecimals(1);
curvePlotter->setFiled(false);
curvePlotter->setPointSize(4);
curvePlotter->setStyle(AxisPlotter::StrokeStyle);
ui->currentValuePlotWidget->setPlotter(curvePlotter);
intervalCount = 6;
controller->start();
}
WindowUSART::WindowUSART(QWidget *parent) :
QMainWindow(parent),
ui(new Ui::WindowUSART)
{
ui->setupUi(this);
serial = new QSerialPort(this);
serial->setPortName("ttyUSB0");
serial->setBaudRate(QSerialPort::Baud9600);
serial->setDataBits(QSerialPort::Data8);
serial->setParity(QSerialPort::NoParity);
serial->setStopBits(QSerialPort::TwoStop);
serial->setFlowControl(QSerialPort::NoFlowControl);
serial->open(QIODevice::ReadWrite);
if( serial->isOpen() == false )
{
ui->textBrowser->append("GOWNO");
}
connect(serial,SIGNAL(readyRead()),this,SLOT(serialReceived()));
palette = new QPalette();
palette->setColor(ui->Sensor1->foregroundRole(),Qt::transparent);
}
QString str;
foreach (const QSerialPortInfo &serialPortInfo, QSerialPortInfo::availablePorts()) {
str=serialPortInfo.portName();
ui->comboBox_2->addItem(str);
}
ui->textEdit->setText(str);
serial->setPortName("COM3");
serial->setBaudRate(QSerialPort::Baud9600);
serial->setDataBits(QSerialPort::Data8);
serial->setParity(QSerialPort::NoParity);
serial->setStopBits(QSerialPort::OneStop);
serial->setFlowControl(QSerialPort::NoFlowControl);
serial->open(QIODevice::ReadWrite);
serial->write("resp8080\n");
createMenus();
connect(serial,SIGNAL(readyRead()),this,SLOT(serialReceived()));
connect(timer,SIGNAL(timeout()),this,SLOT(timeIsOut()));
}
MainWindow::~MainWindow()
{
vBox->close();
vBox2->close();
delete ui;
delete vBox;
delete vBox2;
serial->close();
}
void ReceiveData::serialPortDisconnect()
{
serialPort->close();
disconnect(serialPort, SIGNAL(readyRead()), this, SLOT(serialReceived()));
}
/*----------------------------------------------------------------------------*/
int main(int argc, char *argv[])
{
QApplication a(argc, argv);
a.addLibraryPath(a.applicationDirPath() + "/plugins");
config = new DDAConfig(&a);
if(config->fileExists() && config->isError())
{
QMessageBox::critical(NULL, QObject::tr("Error load config"), config->message());
}
translator = new Translator(&a);
QString locale;
locale = config->settings().localeName;
if(locale.isEmpty())
locale = QLocale::system().name();
if(!translator->load("dda-messages.xml")
&& !translator->load("dda-messages.xml", QDir::currentPath())
&& !translator->load("dda-messages.xml", QLibraryInfo::location(QLibraryInfo::TranslationsPath))
&& locale != "C")
{
QString error = QString("Error load language file '%1': %2").arg("dda-messages.xml").arg(translator->errorString());
QMessageBox::critical(NULL, "Error translation", error);
if(config->settings().localeName.isEmpty())
{
DDASettings s = config->settings();
s.localeName = "C";
config->setSettings(s);
}
}
else
{
if(!translator->setLang(locale))
{
QString error = QString("Error set language: %1").arg(translator->errorString());
QMessageBox::critical(NULL, "Error translation", error);
if(config->settings().localeName.isEmpty())
{
DDASettings s = config->settings();
s.localeName = "C";
config->setSettings(s);
}
}
else
if(config->settings().localeName.isEmpty())
{
DDASettings s = config->settings();
s.localeName = QLocale::system().name();
config->setSettings(s);
}
}
a.installTranslator(translator);
database = new DDADatabase(&a);
if(database->isError())
{
QMessageBox::critical(NULL, QObject::tr("Error open database"), database->message());
}
QStringList profiles = config->profileList();
/*
if(profiles.size() > 1)
{
ProfileSelectDialog dlg;
if(dlg.exec() != QDialog::Accepted || dlg.selectedProfile() < 0 || dlg.selectedProfile() > profiles.size())
return 1;
config->setProfileIndex(dlg.selectedProfile());
}
else */
if(profiles.isEmpty())
{
DDAProfile profile;
config->defaultProfle(&profile);
EditProfileDialog dlg;
dlg.setProfile(profile);
if(dlg.exec() != QDialog::Accepted)
return 1;
config->addProfile(dlg.profile());
config->setProfileIndex(0);
}
int defaultProfile = getOptValue("profile", 'p', -1).toInt();
if(defaultProfile > 0)
config->setProfileIndex(defaultProfile - 1);
session = new DDAMeasureSession(&a);
if(getOptSwitch("demo", 'd') || getOptSwitch("demo-mode", 'D'))
controller = new DemoController(&a);
else
controller = new DDAController(&a);
QObject::connect(controller, SIGNAL(measure(double,double,int)), session, SLOT(addMeasure(double,double,int)));
QObject::connect(controller, SIGNAL(serialReceived(QString)), session, SLOT(setSerial(QString)));
QObject::connect(controller, SIGNAL(endOfMeasuring()), session, SLOT(onEndOfMeasuring()));
QObject::connect(controller, SIGNAL(noParticle()), session, SLOT(onNoParticle()));
QObject::connect(controller, SIGNAL(measure(double,double,int)), database, SLOT(measure(double,double,int)));
QObject::connect(controller, SIGNAL(serialReceived(QString)), database, SLOT(setSerial(QString)));
QObject::connect(controller, SIGNAL(endOfMeasuring()), database, SLOT(onEndOfMeasuring()));
QObject::connect(controller, SIGNAL(noParticle()), database, SLOT(onNoParticle()));
MeasureWindow w;
w.show();
//w.showMaximized();
return a.exec();
}