Ejemplo n.º 1
0
static int uart16550_fdt_init(char *node_path, FDTMachineInfo *fdti,
    void *priv)
{
    /* FIXME: Pass in dynamically */
    MemoryRegion *address_space_mem = get_system_memory();
    hwaddr base;
    uint32_t baudrate;
    qemu_irq irqline;
    bool map_mode;
    char irq_info[1024];
    Error *err = NULL;

    /* FIXME: respect #address and size cells */
    base = qemu_fdt_getprop_cell(fdti->fdt, node_path, "reg", 0,
                                 false, &error_abort);
    base += qemu_fdt_getprop_cell(fdti->fdt, node_path, "reg-offset", 0,
                                  false, &error_abort);
    base &= ~3ULL; /* qemu uart16550 model starts with 3* 8bit offset */

    baudrate = qemu_fdt_getprop_cell(fdti->fdt, node_path, "current-speed",
                                     0, false, &err);
    if (err) {
        baudrate = 115200;
    }

    irqline = *fdt_get_irq_info(fdti, node_path, 0, irq_info, &map_mode);
    assert(!map_mode);
    DB_PRINT_NP(0, "UART16550a: baseaddr: 0x" TARGET_FMT_plx
                ", irq: %s, baud %d\n", base, irq_info, baudrate);

    /* it_shift = 2, reg-shift in DTS - for Xilnx IP is hardcoded */
    serial_mm_init(address_space_mem, base, 2, irqline, baudrate,
                   qemu_char_get_next_serial(), DEVICE_LITTLE_ENDIAN);
    return 0;
}
static int uart16550_fdt_init(char *node_path, FDTMachineInfo *fdti,
    void *priv)
{
    /* FIXME: Pass in dynamically */
    MemoryRegion *address_space_mem = get_system_memory();
    hwaddr base;
    int baudrate;
    qemu_irq irqline;
    char irq_info[1024];
    Error *errp = NULL;

    base = qemu_devtree_getprop_cell(fdti->fdt, node_path, "reg", 0,
                                        false, &errp);
    base += qemu_devtree_getprop_cell(fdti->fdt, node_path, "reg-offset", 0,
                                        false, &errp);
    assert_no_error(errp);
    base &= ~3ULL; /* qemu uart16550 model starts with 3* 8bit offset */

    baudrate = qemu_devtree_getprop_cell(fdti->fdt, node_path, "current-speed",
                                            0, false, &errp);
    if (errp) {
        baudrate = 115200;
    }

    irqline = fdt_get_irq_info(fdti, node_path, 0 , NULL, irq_info);
    printf("FDT: UART16550a: baseaddr: 0x"
           TARGET_FMT_plx ", irq: %s, baud %d\n", base, irq_info, baudrate);

    /* it_shift = 2, reg-shift in DTS - for Xilnx IP is hardcoded */
    (void) serial_mm_init(address_space_mem, base, 2, irqline, baudrate,
                            qemu_char_get_next_serial(), DEVICE_LITTLE_ENDIAN);
    return 0;
}
Ejemplo n.º 3
0
static void moxiesim_init(MachineState *machine)
{
    MoxieCPU *cpu = NULL;
    ram_addr_t ram_size = machine->ram_size;
    const char *cpu_model = machine->cpu_model;
    const char *kernel_filename = machine->kernel_filename;
    const char *kernel_cmdline = machine->kernel_cmdline;
    const char *initrd_filename = machine->initrd_filename;
    CPUMoxieState *env;
    MemoryRegion *address_space_mem = get_system_memory();
    MemoryRegion *ram = g_new(MemoryRegion, 1);
    MemoryRegion *rom = g_new(MemoryRegion, 1);
    hwaddr ram_base = 0x200000;
    LoaderParams loader_params;

    /* Init CPUs. */
    if (cpu_model == NULL) {
        cpu_model = "MoxieLite-moxie-cpu";
    }
    cpu = cpu_moxie_init(cpu_model);
    if (!cpu) {
        fprintf(stderr, "Unable to find CPU definition\n");
        exit(1);
    }
    env = &cpu->env;

    qemu_register_reset(main_cpu_reset, cpu);

    /* Allocate RAM. */
    memory_region_init_ram(ram, NULL, "moxiesim.ram", ram_size, &error_fatal);
    vmstate_register_ram_global(ram);
    memory_region_add_subregion(address_space_mem, ram_base, ram);

    memory_region_init_ram(rom, NULL, "moxie.rom", 128*0x1000, &error_fatal);
    vmstate_register_ram_global(rom);
    memory_region_add_subregion(get_system_memory(), 0x1000, rom);

    if (kernel_filename) {
        loader_params.ram_size = ram_size;
        loader_params.kernel_filename = kernel_filename;
        loader_params.kernel_cmdline = kernel_cmdline;
        loader_params.initrd_filename = initrd_filename;
        load_kernel(cpu, &loader_params);
    }

    /* A single 16450 sits at offset 0x3f8.  */
    if (serial_hds[0]) {
        serial_mm_init(address_space_mem, 0x3f8, 0, env->irq[4],
                       8000000/16, serial_hds[0], DEVICE_LITTLE_ENDIAN);
    }
}
Ejemplo n.º 4
0
static void openrisc_sim_init(MachineState *machine)
{
    ram_addr_t ram_size = machine->ram_size;
    const char *kernel_filename = machine->kernel_filename;
    OpenRISCCPU *cpu = NULL;
    MemoryRegion *ram;
    qemu_irq *cpu_irqs[2];
    qemu_irq serial_irq;
    int n;

    for (n = 0; n < smp_cpus; n++) {
        cpu = OPENRISC_CPU(cpu_create(machine->cpu_type));
        if (cpu == NULL) {
            fprintf(stderr, "Unable to find CPU definition!\n");
            exit(1);
        }
        cpu_openrisc_pic_init(cpu);
        cpu_irqs[n] = (qemu_irq *) cpu->env.irq;

        cpu_openrisc_clock_init(cpu);

        qemu_register_reset(main_cpu_reset, cpu);
    }

    ram = g_malloc(sizeof(*ram));
    memory_region_init_ram(ram, NULL, "openrisc.ram", ram_size, &error_fatal);
    memory_region_add_subregion(get_system_memory(), 0, ram);

    if (nd_table[0].used) {
        openrisc_sim_net_init(0x92000000, 0x92000400, smp_cpus,
                              cpu_irqs, 4, nd_table);
    }

    if (smp_cpus > 1) {
        openrisc_sim_ompic_init(0x98000000, smp_cpus, cpu_irqs, 1);

        serial_irq = qemu_irq_split(cpu_irqs[0][2], cpu_irqs[1][2]);
    } else {
        serial_irq = cpu_irqs[0][2];
    }

    serial_mm_init(get_system_memory(), 0x90000000, 0, serial_irq,
                   115200, serial_hd(0), DEVICE_NATIVE_ENDIAN);

    openrisc_load_kernel(ram_size, kernel_filename);
}
Ejemplo n.º 5
0
static void moxiesim_init(MachineState *machine)
{
    MoxieCPU *cpu = NULL;
    ram_addr_t ram_size = machine->ram_size;
    const char *kernel_filename = machine->kernel_filename;
    const char *kernel_cmdline = machine->kernel_cmdline;
    const char *initrd_filename = machine->initrd_filename;
    CPUMoxieState *env;
    MemoryRegion *address_space_mem = get_system_memory();
    MemoryRegion *ram = g_new(MemoryRegion, 1);
    MemoryRegion *rom = g_new(MemoryRegion, 1);
    hwaddr ram_base = 0x200000;
    LoaderParams loader_params;

    /* Init CPUs. */
    cpu = MOXIE_CPU(cpu_create(machine->cpu_type));
    env = &cpu->env;

    qemu_register_reset(main_cpu_reset, cpu);

    /* Allocate RAM. */
    memory_region_init_ram(ram, NULL, "moxiesim.ram", ram_size, &error_fatal);
    memory_region_add_subregion(address_space_mem, ram_base, ram);

    memory_region_init_ram(rom, NULL, "moxie.rom", FIRMWARE_SIZE, &error_fatal);
    memory_region_add_subregion(get_system_memory(), FIRMWARE_BASE, rom);

    if (kernel_filename) {
        loader_params.ram_size = ram_size;
        loader_params.kernel_filename = kernel_filename;
        loader_params.kernel_cmdline = kernel_cmdline;
        loader_params.initrd_filename = initrd_filename;
        load_kernel(cpu, &loader_params);
    }
    if (bios_name) {
        if (load_image_targphys(bios_name, FIRMWARE_BASE, FIRMWARE_SIZE) < 0) {
            error_report("Failed to load firmware '%s'", bios_name);
        }
    }

    /* A single 16450 sits at offset 0x3f8.  */
    if (serial_hds[0]) {
        serial_mm_init(address_space_mem, 0x3f8, 0, env->irq[4],
                       8000000/16, serial_hds[0], DEVICE_LITTLE_ENDIAN);
    }
}
Ejemplo n.º 6
0
static void openrisc_sim_init(QEMUMachineInitArgs *args)
{
    ram_addr_t ram_size = args->ram_size;
    const char *cpu_model = args->cpu_model;
    const char *kernel_filename = args->kernel_filename;
   OpenRISCCPU *cpu = NULL;
    MemoryRegion *ram;
    int n;

    if (!cpu_model) {
        cpu_model = "or1200";
    }

    for (n = 0; n < smp_cpus; n++) {
        cpu = cpu_openrisc_init(cpu_model);
        if (cpu == NULL) {
            qemu_log("Unable to find CPU defineition!\n");
            exit(1);
        }
        qemu_register_reset(main_cpu_reset, cpu);
        main_cpu_reset(cpu);
    }

    ram = g_malloc(sizeof(*ram));
    memory_region_init_ram(ram, "openrisc.ram", ram_size);
    vmstate_register_ram_global(ram);
    memory_region_add_subregion(get_system_memory(), 0, ram);

    cpu_openrisc_pic_init(cpu);
    cpu_openrisc_clock_init(cpu);

    serial_mm_init(get_system_memory(), 0x90000000, 0, cpu->env.irq[2],
                   115200, serial_hds[0], DEVICE_NATIVE_ENDIAN);

    if (nd_table[0].used) {
        openrisc_sim_net_init(get_system_memory(), 0x92000000,
                              0x92000400, cpu->env.irq[4], nd_table);
    }

    cpu_openrisc_load_kernel(ram_size, kernel_filename, cpu);
}
Ejemplo n.º 7
0
CPUState *ppc440ep_init(ram_addr_t *ram_size, PCIBus **pcip,
                        const unsigned int pci_irq_nrs[4], int do_init,
                        const char *cpu_model)
{
    target_phys_addr_t ram_bases[PPC440EP_SDRAM_NR_BANKS];
    target_phys_addr_t ram_sizes[PPC440EP_SDRAM_NR_BANKS];
    CPUState *env;
    qemu_irq *pic;
    qemu_irq *irqs;
    qemu_irq *pci_irqs;

    if (cpu_model == NULL)
        cpu_model = "405"; // XXX: should be 440EP
    env = cpu_init(cpu_model);
    if (!env) {
        fprintf(stderr, "Unable to initialize CPU!\n");
        exit(1);
    }

    ppc_dcr_init(env, NULL, NULL);

    /* interrupt controller */
    irqs = qemu_mallocz(sizeof(qemu_irq) * PPCUIC_OUTPUT_NB);
    irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT];
    irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT];
    pic = ppcuic_init(env, irqs, 0x0C0, 0, 1);

    /* SDRAM controller */
    memset(ram_bases, 0, sizeof(ram_bases));
    memset(ram_sizes, 0, sizeof(ram_sizes));
    *ram_size = ppc4xx_sdram_adjust(*ram_size, PPC440EP_SDRAM_NR_BANKS,
                                    ram_bases, ram_sizes,
                                    ppc440ep_sdram_bank_sizes);
    /* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */
    ppc4xx_sdram_init(env, pic[14], PPC440EP_SDRAM_NR_BANKS, ram_bases,
                      ram_sizes, do_init);

    /* PCI */
    pci_irqs = qemu_malloc(sizeof(qemu_irq) * 4);
    pci_irqs[0] = pic[pci_irq_nrs[0]];
    pci_irqs[1] = pic[pci_irq_nrs[1]];
    pci_irqs[2] = pic[pci_irq_nrs[2]];
    pci_irqs[3] = pic[pci_irq_nrs[3]];
    *pcip = ppc4xx_pci_init(env, pci_irqs,
                            PPC440EP_PCI_CONFIG,
                            PPC440EP_PCI_INTACK,
                            PPC440EP_PCI_SPECIAL,
                            PPC440EP_PCI_REGS);
    if (!*pcip)
        printf("couldn't create PCI controller!\n");

    isa_mmio_init(PPC440EP_PCI_IO, PPC440EP_PCI_IOLEN, 1);

    if (serial_hds[0] != NULL) {
        serial_mm_init(0xef600300, 0, pic[0], PPC_SERIAL_MM_BAUDBASE,
                       serial_hds[0], 1, 1);
    }
    if (serial_hds[1] != NULL) {
        serial_mm_init(0xef600400, 0, pic[1], PPC_SERIAL_MM_BAUDBASE,
                       serial_hds[1], 1, 1);
    }

    return env;
}
Ejemplo n.º 8
0
static void virtex_init(MachineState *machine)
{
    ram_addr_t ram_size = machine->ram_size;
    const char *kernel_filename = machine->kernel_filename;
    const char *kernel_cmdline = machine->kernel_cmdline;
    hwaddr initrd_base = 0;
    int initrd_size = 0;
    MemoryRegion *address_space_mem = get_system_memory();
    DeviceState *dev;
    PowerPCCPU *cpu;
    CPUPPCState *env;
    hwaddr ram_base = 0;
    DriveInfo *dinfo;
    MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
    qemu_irq irq[32], *cpu_irq;
    int kernel_size;
    int i;

    /* init CPUs */
    if (machine->cpu_model == NULL) {
        machine->cpu_model = "440-Xilinx";
    }

    cpu = ppc440_init_xilinx(&ram_size, 1, machine->cpu_model, 400000000);
    env = &cpu->env;
    qemu_register_reset(main_cpu_reset, cpu);

    memory_region_allocate_system_memory(phys_ram, NULL, "ram", ram_size);
    memory_region_add_subregion(address_space_mem, ram_base, phys_ram);

    dinfo = drive_get(IF_PFLASH, 0, 0);
    pflash_cfi01_register(PFLASH_BASEADDR, NULL, "virtex.flash", FLASH_SIZE,
                          dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
                          (64 * 1024), FLASH_SIZE >> 16,
                          1, 0x89, 0x18, 0x0000, 0x0, 1);

    cpu_irq = (qemu_irq *) &env->irq_inputs[PPC40x_INPUT_INT];
    dev = qdev_create(NULL, "xlnx.xps-intc");
    qdev_prop_set_uint32(dev, "kind-of-intr", 0);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, cpu_irq[0]);
    for (i = 0; i < 32; i++) {
        irq[i] = qdev_get_gpio_in(dev, i);
    }

    serial_mm_init(address_space_mem, UART16550_BASEADDR, 2, irq[UART16550_IRQ],
                   115200, serial_hds[0], DEVICE_LITTLE_ENDIAN);

    /* 2 timers at irq 2 @ 62 Mhz.  */
    dev = qdev_create(NULL, "xlnx.xps-timer");
    qdev_prop_set_uint32(dev, "one-timer-only", 0);
    qdev_prop_set_uint32(dev, "clock-frequency", 62 * 1000000);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);

    if (kernel_filename) {
        uint64_t entry, low, high;
        hwaddr boot_offset;

        /* Boots a kernel elf binary.  */
        kernel_size = load_elf(kernel_filename, NULL, NULL,
                               &entry, &low, &high, 1, PPC_ELF_MACHINE, 0);
        boot_info.bootstrap_pc = entry & 0x00ffffff;

        if (kernel_size < 0) {
            boot_offset = 0x1200000;
            /* If we failed loading ELF's try a raw image.  */
            kernel_size = load_image_targphys(kernel_filename,
                                              boot_offset,
                                              ram_size);
            boot_info.bootstrap_pc = boot_offset;
            high = boot_info.bootstrap_pc + kernel_size + 8192;
        }

        boot_info.ima_size = kernel_size;

        /* Load initrd. */
        if (machine->initrd_filename) {
            initrd_base = high = ROUND_UP(high, 4);
            initrd_size = load_image_targphys(machine->initrd_filename,
                                              high, ram_size - high);

            if (initrd_size < 0) {
                error_report("couldn't load ram disk '%s'",
                             machine->initrd_filename);
                exit(1);
            }
            high = ROUND_UP(high + initrd_size, 4);
        }

        /* Provide a device-tree.  */
        boot_info.fdt = high + (8192 * 2);
        boot_info.fdt &= ~8191;

        xilinx_load_device_tree(boot_info.fdt, ram_size,
                                initrd_base, initrd_size,
                                kernel_cmdline);
    }
    env->load_info = &boot_info;
}
Ejemplo n.º 9
0
Archivo: e500.c Proyecto: Annovae/qemu
void ppce500_init(QEMUMachineInitArgs *args, PPCE500Params *params)
{
    MemoryRegion *address_space_mem = get_system_memory();
    MemoryRegion *ram = g_new(MemoryRegion, 1);
    PCIBus *pci_bus;
    CPUPPCState *env = NULL;
    uint64_t elf_entry;
    uint64_t elf_lowaddr;
    hwaddr entry=0;
    hwaddr loadaddr=UIMAGE_LOAD_BASE;
    target_long kernel_size=0;
    target_ulong dt_base = 0;
    target_ulong initrd_base = 0;
    target_long initrd_size = 0;
    target_ulong cur_base = 0;
    int i;
    unsigned int pci_irq_nrs[4] = {1, 2, 3, 4};
    qemu_irq **irqs, *mpic;
    DeviceState *dev;
    CPUPPCState *firstenv = NULL;
    MemoryRegion *ccsr_addr_space;
    SysBusDevice *s;
    PPCE500CCSRState *ccsr;

    /* Setup CPUs */
    if (args->cpu_model == NULL) {
        args->cpu_model = "e500v2_v30";
    }

    irqs = g_malloc0(smp_cpus * sizeof(qemu_irq *));
    irqs[0] = g_malloc0(smp_cpus * sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
    for (i = 0; i < smp_cpus; i++) {
        PowerPCCPU *cpu;
        CPUState *cs;
        qemu_irq *input;

        cpu = cpu_ppc_init(args->cpu_model);
        if (cpu == NULL) {
            fprintf(stderr, "Unable to initialize CPU!\n");
            exit(1);
        }
        env = &cpu->env;
        cs = CPU(cpu);

        if (!firstenv) {
            firstenv = env;
        }

        irqs[i] = irqs[0] + (i * OPENPIC_OUTPUT_NB);
        input = (qemu_irq *)env->irq_inputs;
        irqs[i][OPENPIC_OUTPUT_INT] = input[PPCE500_INPUT_INT];
        irqs[i][OPENPIC_OUTPUT_CINT] = input[PPCE500_INPUT_CINT];
        env->spr[SPR_BOOKE_PIR] = cs->cpu_index = i;
        env->mpic_iack = MPC8544_CCSRBAR_BASE +
                         MPC8544_MPIC_REGS_OFFSET + 0xa0;

        ppc_booke_timers_init(cpu, 400000000, PPC_TIMER_E500);

        /* Register reset handler */
        if (!i) {
            /* Primary CPU */
            struct boot_info *boot_info;
            boot_info = g_malloc0(sizeof(struct boot_info));
            qemu_register_reset(ppce500_cpu_reset, cpu);
            env->load_info = boot_info;
        } else {
            /* Secondary CPUs */
            qemu_register_reset(ppce500_cpu_reset_sec, cpu);
        }
    }

    env = firstenv;

    /* Fixup Memory size on a alignment boundary */
    ram_size &= ~(RAM_SIZES_ALIGN - 1);
    args->ram_size = ram_size;

    /* Register Memory */
    memory_region_init_ram(ram, NULL, "mpc8544ds.ram", ram_size);
    vmstate_register_ram_global(ram);
    memory_region_add_subregion(address_space_mem, 0, ram);

    dev = qdev_create(NULL, "e500-ccsr");
    object_property_add_child(qdev_get_machine(), "e500-ccsr",
                              OBJECT(dev), NULL);
    qdev_init_nofail(dev);
    ccsr = CCSR(dev);
    ccsr_addr_space = &ccsr->ccsr_space;
    memory_region_add_subregion(address_space_mem, MPC8544_CCSRBAR_BASE,
                                ccsr_addr_space);

    mpic = ppce500_init_mpic(params, ccsr_addr_space, irqs);

    /* Serial */
    if (serial_hds[0]) {
        serial_mm_init(ccsr_addr_space, MPC8544_SERIAL0_REGS_OFFSET,
                       0, mpic[42], 399193,
                       serial_hds[0], DEVICE_BIG_ENDIAN);
    }

    if (serial_hds[1]) {
        serial_mm_init(ccsr_addr_space, MPC8544_SERIAL1_REGS_OFFSET,
                       0, mpic[42], 399193,
                       serial_hds[1], DEVICE_BIG_ENDIAN);
    }

    /* General Utility device */
    dev = qdev_create(NULL, "mpc8544-guts");
    qdev_init_nofail(dev);
    s = SYS_BUS_DEVICE(dev);
    memory_region_add_subregion(ccsr_addr_space, MPC8544_UTIL_OFFSET,
                                sysbus_mmio_get_region(s, 0));

    /* PCI */
    dev = qdev_create(NULL, "e500-pcihost");
    qdev_prop_set_uint32(dev, "first_slot", params->pci_first_slot);
    qdev_init_nofail(dev);
    s = SYS_BUS_DEVICE(dev);
    sysbus_connect_irq(s, 0, mpic[pci_irq_nrs[0]]);
    sysbus_connect_irq(s, 1, mpic[pci_irq_nrs[1]]);
    sysbus_connect_irq(s, 2, mpic[pci_irq_nrs[2]]);
    sysbus_connect_irq(s, 3, mpic[pci_irq_nrs[3]]);
    memory_region_add_subregion(ccsr_addr_space, MPC8544_PCI_REGS_OFFSET,
                                sysbus_mmio_get_region(s, 0));

    pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
    if (!pci_bus)
        printf("couldn't create PCI controller!\n");

    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, MPC8544_PCI_IO);

    if (pci_bus) {
        /* Register network interfaces. */
        for (i = 0; i < nb_nics; i++) {
            pci_nic_init_nofail(&nd_table[i], pci_bus, "virtio", NULL);
        }
    }

    /* Register spinning region */
    sysbus_create_simple("e500-spin", MPC8544_SPIN_BASE, NULL);

    /* Load kernel. */
    if (args->kernel_filename) {
        kernel_size = load_uimage(args->kernel_filename, &entry,
                                  &loadaddr, NULL);
        if (kernel_size < 0) {
            kernel_size = load_elf(args->kernel_filename, NULL, NULL,
                                   &elf_entry, &elf_lowaddr, NULL, 1,
                                   ELF_MACHINE, 0);
            entry = elf_entry;
            loadaddr = elf_lowaddr;
        }
        /* XXX try again as binary */
        if (kernel_size < 0) {
            fprintf(stderr, "qemu: could not load kernel '%s'\n",
                    args->kernel_filename);
            exit(1);
        }

        cur_base = loadaddr + kernel_size;

        /* Reserve space for dtb */
        dt_base = (cur_base + DTC_LOAD_PAD) & ~DTC_PAD_MASK;
        cur_base += DTB_MAX_SIZE;
    }

    /* Load initrd. */
    if (args->initrd_filename) {
        initrd_base = (cur_base + INITRD_LOAD_PAD) & ~INITRD_PAD_MASK;
        initrd_size = load_image_targphys(args->initrd_filename, initrd_base,
                                          ram_size - initrd_base);

        if (initrd_size < 0) {
            fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
                    args->initrd_filename);
            exit(1);
        }

        cur_base = initrd_base + initrd_size;
    }

    /* If we're loading a kernel directly, we must load the device tree too. */
    if (args->kernel_filename) {
        struct boot_info *boot_info;
        int dt_size;

        dt_size = ppce500_prep_device_tree(args, params, dt_base,
                                           initrd_base, initrd_size);
        if (dt_size < 0) {
            fprintf(stderr, "couldn't load device tree\n");
            exit(1);
        }
        assert(dt_size < DTB_MAX_SIZE);

        boot_info = env->load_info;
        boot_info->entry = entry;
        boot_info->dt_base = dt_base;
        boot_info->dt_size = dt_size;
    }

    if (kvm_enabled()) {
        kvmppc_init();
    }
}
Ejemplo n.º 10
0
static void riscv_board_init(QEMUMachineInitArgs *args)
{
    ram_addr_t ram_size = args->ram_size;
    const char *cpu_model = args->cpu_model;
    const char *kernel_filename = args->kernel_filename;
    const char *kernel_cmdline = args->kernel_cmdline;
    const char *initrd_filename = args->initrd_filename;
    MemoryRegion *system_memory = get_system_memory();
    MemoryRegion *main_mem = g_new(MemoryRegion, 1);
    RISCVCPU *cpu;
    CPURISCVState *env;
    int i;
#ifdef CONFIG_RISCV_HTIF
    DriveInfo *htifbd_drive;
    char *htifbd_fname; // htif block device filename
#endif

    DeviceState *dev = qdev_create(NULL, TYPE_RISCV_BOARD);

    object_property_set_bool(OBJECT(dev), true, "realized", NULL);

    /* Make sure the first 3 serial ports are associated with a device. */
    for(i = 0; i < 3; i++) {
        if (!serial_hds[i]) {
            char label[32];
            snprintf(label, sizeof(label), "serial%d", i);
            serial_hds[i] = qemu_chr_new(label, "null", NULL);
        }
    }

    /* init CPUs */
    if (cpu_model == NULL) {
        cpu_model = "riscv-generic";
    }

    for (i = 0; i < smp_cpus; i++) {
        cpu = cpu_riscv_init(cpu_model);
        if (cpu == NULL) {
            fprintf(stderr, "Unable to find CPU definition\n");
            exit(1);
        }
        env = &cpu->env;

        /* Init internal devices */
        cpu_riscv_irq_init_cpu(env);
        cpu_riscv_clock_init(env);
        qemu_register_reset(main_cpu_reset, cpu);
    }
    cpu = RISCV_CPU(first_cpu);
    env = &cpu->env;

    /* register system main memory (actual RAM) */
    memory_region_init_ram(main_mem, NULL, "riscv_board.ram", ram_size);
    vmstate_register_ram_global(main_mem);
    memory_region_add_subregion(system_memory, 0x0, main_mem);

    if (kernel_filename) {
        /* Write a small bootloader to the flash location. */
        loaderparams.ram_size = ram_size;
        loaderparams.kernel_filename = kernel_filename;
        loaderparams.kernel_cmdline = kernel_cmdline;
        loaderparams.initrd_filename = initrd_filename;
        load_kernel();
    }

    // write memory amount in MiB to 0x0
    stl_p(memory_region_get_ram_ptr(main_mem), loaderparams.ram_size >> 20);

#ifdef CONFIG_RISCV_HTIF
    serial_mm_init(system_memory, 0x3f8, 0, env->irq[4], 1843200/16, serial_hds[0],
        DEVICE_NATIVE_ENDIAN);

    // setup HTIF Block Device if one is specified as -hda FILENAME
    htifbd_drive = drive_get_by_index(IF_IDE, 0);
    if (NULL == htifbd_drive) {
        htifbd_fname = NULL;
    } else {
        htifbd_fname = (*(htifbd_drive->bdrv)).filename;
    }

    // add htif device 0x400 - 0x410
    htif_mm_init(system_memory, 0x400, env->irq[0], main_mem, htifbd_fname);
#else
    // add serial device 0x3f8-0x3ff
    serial_mm_init(system_memory, 0x3f8, 0, env->irq[1], 1843200/16, serial_hds[0],
        DEVICE_NATIVE_ENDIAN);

    /* Create MMIO transports, to which virtio backends created by the
     * user are automatically connected as needed.  If no backend is
     * present, the transport simply remains harmlessly idle.
     * Each memory-mapped region is 0x200 bytes in size.
     */
    sysbus_create_simple("virtio-mmio", 0x400, env->irq[2]);
    sysbus_create_simple("virtio-mmio", 0x600, env->irq[3]);
    sysbus_create_simple("virtio-mmio", 0x800, env->irq[4]);
#endif

    /* Init internal devices */
    cpu_riscv_irq_init_cpu(env);
    cpu_riscv_clock_init(env);
}
Ejemplo n.º 11
0
static void ast2400_realize(DeviceState *dev, Error **errp)
{
    int i;
    AST2400State *s = AST2400(dev);
    Error *err = NULL, *local_err = NULL;

    /* IO space */
    memory_region_init_io(&s->iomem, NULL, &ast2400_io_ops, NULL,
            "ast2400.io", AST2400_IOMEM_SIZE);
    memory_region_add_subregion_overlap(get_system_memory(), AST2400_IOMEM_BASE,
            &s->iomem, -1);

    /* VIC */
    object_property_set_bool(OBJECT(&s->vic), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, AST2400_VIC_BASE);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 0,
                       qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ));
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1,
                       qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ));

    /* Timer */
    object_property_set_bool(OBJECT(&s->timerctrl), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, AST2400_TIMER_BASE);
    for (i = 0; i < ARRAY_SIZE(timer_irqs); i++) {
        qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->vic), timer_irqs[i]);
        sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
    }

    /* SCU */
    object_property_set_bool(OBJECT(&s->scu), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, AST2400_SCU_BASE);

    /* UART - attach an 8250 to the IO space as our UART5 */
    if (serial_hds[0]) {
        qemu_irq uart5 = qdev_get_gpio_in(DEVICE(&s->vic), uart_irqs[4]);
        serial_mm_init(&s->iomem, AST2400_UART_5_BASE, 2,
                       uart5, 38400, serial_hds[0], DEVICE_LITTLE_ENDIAN);
    }

    /* I2C */
    object_property_set_bool(OBJECT(&s->i2c), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, AST2400_I2C_BASE);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0,
                       qdev_get_gpio_in(DEVICE(&s->vic), 12));

    /* SMC */
    object_property_set_int(OBJECT(&s->smc), 1, "num-cs", &err);
    object_property_set_bool(OBJECT(&s->smc), true, "realized", &local_err);
    error_propagate(&err, local_err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->smc), 0, AST2400_FMC_BASE);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->smc), 1, AST2400_FMC_FLASH_BASE);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->smc), 0,
                       qdev_get_gpio_in(DEVICE(&s->vic), 19));

    /* SPI */
    object_property_set_int(OBJECT(&s->spi), 1, "num-cs", &err);
    object_property_set_bool(OBJECT(&s->spi), true, "realized", &local_err);
    error_propagate(&err, local_err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi), 0, AST2400_SPI_BASE);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi), 1, AST2400_SPI_FLASH_BASE);
}
Ejemplo n.º 12
0
static void lx_init(const LxBoardDesc *board, MachineState *machine)
{
#ifdef TARGET_WORDS_BIGENDIAN
    int be = 1;
#else
    int be = 0;
#endif
    MemoryRegion *system_memory = get_system_memory();
    XtensaCPU *cpu = NULL;
    CPUXtensaState *env = NULL;
    MemoryRegion *ram, *rom, *system_io;
    DriveInfo *dinfo;
    pflash_t *flash = NULL;
    QemuOpts *machine_opts = qemu_get_machine_opts();
    const char *cpu_model = machine->cpu_model;
    const char *kernel_filename = qemu_opt_get(machine_opts, "kernel");
    const char *kernel_cmdline = qemu_opt_get(machine_opts, "append");
    const char *dtb_filename = qemu_opt_get(machine_opts, "dtb");
    const char *initrd_filename = qemu_opt_get(machine_opts, "initrd");
    int n;

    if (!cpu_model) {
        cpu_model = XTENSA_DEFAULT_CPU_MODEL;
    }

    for (n = 0; n < smp_cpus; n++) {
        cpu = cpu_xtensa_init(cpu_model);
        if (cpu == NULL) {
            error_report("unable to find CPU definition '%s'",
                         cpu_model);
            exit(EXIT_FAILURE);
        }
        env = &cpu->env;

        env->sregs[PRID] = n;
        qemu_register_reset(lx60_reset, cpu);
        /* Need MMU initialized prior to ELF loading,
         * so that ELF gets loaded into virtual addresses
         */
        cpu_reset(CPU(cpu));
    }

    ram = g_malloc(sizeof(*ram));
    memory_region_init_ram(ram, NULL, "lx60.dram", machine->ram_size,
                           &error_fatal);
    vmstate_register_ram_global(ram);
    memory_region_add_subregion(system_memory, 0, ram);

    system_io = g_malloc(sizeof(*system_io));
    memory_region_init_io(system_io, NULL, &lx60_io_ops, NULL, "lx60.io",
                          224 * 1024 * 1024);
    memory_region_add_subregion(system_memory, 0xf0000000, system_io);
    lx60_fpga_init(system_io, 0x0d020000);
    if (nd_table[0].used) {
        lx60_net_init(system_io, 0x0d030000, 0x0d030400, 0x0d800000,
                xtensa_get_extint(env, 1), nd_table);
    }

    if (!serial_hds[0]) {
        serial_hds[0] = qemu_chr_new("serial0", "null", NULL);
    }

    serial_mm_init(system_io, 0x0d050020, 2, xtensa_get_extint(env, 0),
            115200, serial_hds[0], DEVICE_NATIVE_ENDIAN);

    dinfo = drive_get(IF_PFLASH, 0, 0);
    if (dinfo) {
        flash = xtfpga_flash_init(system_io, board, dinfo, be);
    }

    /* Use presence of kernel file name as 'boot from SRAM' switch. */
    if (kernel_filename) {
        uint32_t entry_point = env->pc;
        size_t bp_size = 3 * get_tag_size(0); /* first/last and memory tags */
        uint32_t tagptr = 0xfe000000 + board->sram_size;
        uint32_t cur_tagptr;
        BpMemInfo memory_location = {
            .type = tswap32(MEMORY_TYPE_CONVENTIONAL),
            .start = tswap32(0),
            .end = tswap32(machine->ram_size),
        };
        uint32_t lowmem_end = machine->ram_size < 0x08000000 ?
            machine->ram_size : 0x08000000;
        uint32_t cur_lowmem = QEMU_ALIGN_UP(lowmem_end / 2, 4096);

        rom = g_malloc(sizeof(*rom));
        memory_region_init_ram(rom, NULL, "lx60.sram", board->sram_size,
                               &error_fatal);
        vmstate_register_ram_global(rom);
        memory_region_add_subregion(system_memory, 0xfe000000, rom);

        if (kernel_cmdline) {
            bp_size += get_tag_size(strlen(kernel_cmdline) + 1);
        }
        if (dtb_filename) {
            bp_size += get_tag_size(sizeof(uint32_t));
        }
        if (initrd_filename) {
            bp_size += get_tag_size(sizeof(BpMemInfo));
        }

        /* Put kernel bootparameters to the end of that SRAM */
        tagptr = (tagptr - bp_size) & ~0xff;
        cur_tagptr = put_tag(tagptr, BP_TAG_FIRST, 0, NULL);
        cur_tagptr = put_tag(cur_tagptr, BP_TAG_MEMORY,
                             sizeof(memory_location), &memory_location);

        if (kernel_cmdline) {
            cur_tagptr = put_tag(cur_tagptr, BP_TAG_COMMAND_LINE,
                                 strlen(kernel_cmdline) + 1, kernel_cmdline);
        }
        if (dtb_filename) {
            int fdt_size;
            void *fdt = load_device_tree(dtb_filename, &fdt_size);
            uint32_t dtb_addr = tswap32(cur_lowmem);

            if (!fdt) {
                error_report("could not load DTB '%s'", dtb_filename);
                exit(EXIT_FAILURE);
            }

            cpu_physical_memory_write(cur_lowmem, fdt, fdt_size);
            cur_tagptr = put_tag(cur_tagptr, BP_TAG_FDT,
                                 sizeof(dtb_addr), &dtb_addr);
            cur_lowmem = QEMU_ALIGN_UP(cur_lowmem + fdt_size, 4096);
        }
        if (initrd_filename) {
            BpMemInfo initrd_location = { 0 };
            int initrd_size = load_ramdisk(initrd_filename, cur_lowmem,
                                           lowmem_end - cur_lowmem);

            if (initrd_size < 0) {
                initrd_size = load_image_targphys(initrd_filename,
                                                  cur_lowmem,
                                                  lowmem_end - cur_lowmem);
            }
            if (initrd_size < 0) {
                error_report("could not load initrd '%s'", initrd_filename);
                exit(EXIT_FAILURE);
            }
            initrd_location.start = tswap32(cur_lowmem);
            initrd_location.end = tswap32(cur_lowmem + initrd_size);
            cur_tagptr = put_tag(cur_tagptr, BP_TAG_INITRD,
                                 sizeof(initrd_location), &initrd_location);
            cur_lowmem = QEMU_ALIGN_UP(cur_lowmem + initrd_size, 4096);
        }
        cur_tagptr = put_tag(cur_tagptr, BP_TAG_LAST, 0, NULL);
        env->regs[2] = tagptr;

        uint64_t elf_entry;
        uint64_t elf_lowaddr;
        int success = load_elf(kernel_filename, translate_phys_addr, cpu,
                &elf_entry, &elf_lowaddr, NULL, be, EM_XTENSA, 0, 0);
        if (success > 0) {
            entry_point = elf_entry;
        } else {
            hwaddr ep;
            int is_linux;
            success = load_uimage(kernel_filename, &ep, NULL, &is_linux,
                                  translate_phys_addr, cpu);
            if (success > 0 && is_linux) {
                entry_point = ep;
            } else {
                error_report("could not load kernel '%s'",
                             kernel_filename);
                exit(EXIT_FAILURE);
            }
        }
        if (entry_point != env->pc) {
            static const uint8_t jx_a0[] = {
#ifdef TARGET_WORDS_BIGENDIAN
                0x0a, 0, 0,
#else
                0xa0, 0, 0,
#endif
            };
            env->regs[0] = entry_point;
            cpu_physical_memory_write(env->pc, jx_a0, sizeof(jx_a0));
        }
    } else {
        if (flash) {
            MemoryRegion *flash_mr = pflash_cfi01_get_memory(flash);
            MemoryRegion *flash_io = g_malloc(sizeof(*flash_io));

            memory_region_init_alias(flash_io, NULL, "lx60.flash",
                    flash_mr, board->flash_boot_base,
                    board->flash_size - board->flash_boot_base < 0x02000000 ?
                    board->flash_size - board->flash_boot_base : 0x02000000);
            memory_region_add_subregion(system_memory, 0xfe000000,
                    flash_io);
        }
    }
}
Ejemplo n.º 13
0
static void mpc8544ds_init(ram_addr_t ram_size,
                         const char *boot_device,
                         const char *kernel_filename,
                         const char *kernel_cmdline,
                         const char *initrd_filename,
                         const char *cpu_model)
{
    MemoryRegion *address_space_mem = get_system_memory();
    MemoryRegion *ram = g_new(MemoryRegion, 1);
    PCIBus *pci_bus;
    CPUPPCState *env = NULL;
    uint64_t elf_entry;
    uint64_t elf_lowaddr;
    target_phys_addr_t entry=0;
    target_phys_addr_t loadaddr=UIMAGE_LOAD_BASE;
    target_long kernel_size=0;
    target_ulong dt_base = 0;
    target_ulong initrd_base = 0;
    target_long initrd_size=0;
    int i=0;
    unsigned int pci_irq_nrs[4] = {1, 2, 3, 4};
    qemu_irq **irqs, *mpic;
    DeviceState *dev;
    CPUPPCState *firstenv = NULL;

    /* Setup CPUs */
    if (cpu_model == NULL) {
        cpu_model = "e500v2_v30";
    }

    irqs = g_malloc0(smp_cpus * sizeof(qemu_irq *));
    irqs[0] = g_malloc0(smp_cpus * sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
    for (i = 0; i < smp_cpus; i++) {
        PowerPCCPU *cpu;
        qemu_irq *input;

        cpu = cpu_ppc_init(cpu_model);
        if (cpu == NULL) {
            fprintf(stderr, "Unable to initialize CPU!\n");
            exit(1);
        }
        env = &cpu->env;

        if (!firstenv) {
            firstenv = env;
        }

        irqs[i] = irqs[0] + (i * OPENPIC_OUTPUT_NB);
        input = (qemu_irq *)env->irq_inputs;
        irqs[i][OPENPIC_OUTPUT_INT] = input[PPCE500_INPUT_INT];
        irqs[i][OPENPIC_OUTPUT_CINT] = input[PPCE500_INPUT_CINT];
        env->spr[SPR_BOOKE_PIR] = env->cpu_index = i;

        ppc_booke_timers_init(env, 400000000, PPC_TIMER_E500);

        /* Register reset handler */
        if (!i) {
            /* Primary CPU */
            struct boot_info *boot_info;
            boot_info = g_malloc0(sizeof(struct boot_info));
            qemu_register_reset(mpc8544ds_cpu_reset, cpu);
            env->load_info = boot_info;
        } else {
            /* Secondary CPUs */
            qemu_register_reset(mpc8544ds_cpu_reset_sec, cpu);
        }
    }

    env = firstenv;

    /* Fixup Memory size on a alignment boundary */
    ram_size &= ~(RAM_SIZES_ALIGN - 1);

    /* Register Memory */
    memory_region_init_ram(ram, "mpc8544ds.ram", ram_size);
    vmstate_register_ram_global(ram);
    memory_region_add_subregion(address_space_mem, 0, ram);

    /* MPIC */
    mpic = mpic_init(address_space_mem, MPC8544_MPIC_REGS_BASE,
                     smp_cpus, irqs, NULL);

    if (!mpic) {
        cpu_abort(env, "MPIC failed to initialize\n");
    }

    /* Serial */
    if (serial_hds[0]) {
        serial_mm_init(address_space_mem, MPC8544_SERIAL0_REGS_BASE,
                       0, mpic[12+26], 399193,
                       serial_hds[0], DEVICE_BIG_ENDIAN);
    }

    if (serial_hds[1]) {
        serial_mm_init(address_space_mem, MPC8544_SERIAL1_REGS_BASE,
                       0, mpic[12+26], 399193,
                       serial_hds[0], DEVICE_BIG_ENDIAN);
    }

    /* General Utility device */
    sysbus_create_simple("mpc8544-guts", MPC8544_UTIL_BASE, NULL);

    /* PCI */
    dev = sysbus_create_varargs("e500-pcihost", MPC8544_PCI_REGS_BASE,
                                mpic[pci_irq_nrs[0]], mpic[pci_irq_nrs[1]],
                                mpic[pci_irq_nrs[2]], mpic[pci_irq_nrs[3]],
                                NULL);
    pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
    if (!pci_bus)
        printf("couldn't create PCI controller!\n");

    isa_mmio_init(MPC8544_PCI_IO, MPC8544_PCI_IOLEN);

    if (pci_bus) {
        /* Register network interfaces. */
        for (i = 0; i < nb_nics; i++) {
            pci_nic_init_nofail(&nd_table[i], "virtio", NULL);
        }
    }

    /* Register spinning region */
    sysbus_create_simple("e500-spin", MPC8544_SPIN_BASE, NULL);

    /* Load kernel. */
    if (kernel_filename) {
        kernel_size = load_uimage(kernel_filename, &entry, &loadaddr, NULL);
        if (kernel_size < 0) {
            kernel_size = load_elf(kernel_filename, NULL, NULL, &elf_entry,
                                   &elf_lowaddr, NULL, 1, ELF_MACHINE, 0);
            entry = elf_entry;
            loadaddr = elf_lowaddr;
        }
        /* XXX try again as binary */
        if (kernel_size < 0) {
            fprintf(stderr, "qemu: could not load kernel '%s'\n",
                    kernel_filename);
            exit(1);
        }
    }

    /* Load initrd. */
    if (initrd_filename) {
        initrd_base = (kernel_size + INITRD_LOAD_PAD) & ~INITRD_PAD_MASK;
        initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                          ram_size - initrd_base);

        if (initrd_size < 0) {
            fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
                    initrd_filename);
            exit(1);
        }
    }

    /* If we're loading a kernel directly, we must load the device tree too. */
    if (kernel_filename) {
        struct boot_info *boot_info;

#ifndef CONFIG_FDT
        cpu_abort(env, "Compiled without FDT support - can't load kernel\n");
#endif
        dt_base = (kernel_size + DTC_LOAD_PAD) & ~DTC_PAD_MASK;
        if (mpc8544_load_device_tree(env, dt_base, ram_size,
                    initrd_base, initrd_size, kernel_cmdline) < 0) {
            fprintf(stderr, "couldn't load device tree\n");
            exit(1);
        }

        boot_info = env->load_info;
        boot_info->entry = entry;
        boot_info->dt_base = dt_base;
    }

    if (kvm_enabled()) {
        kvmppc_init();
    }
}
Ejemplo n.º 14
0
static void bamboo_init(QEMUMachineInitArgs *args)
{
    ram_addr_t ram_size = args->ram_size;
    const char *cpu_model = args->cpu_model;
    const char *kernel_filename = args->kernel_filename;
    const char *kernel_cmdline = args->kernel_cmdline;
    const char *initrd_filename = args->initrd_filename;
    unsigned int pci_irq_nrs[4] = { 28, 27, 26, 25 };
    MemoryRegion *address_space_mem = get_system_memory();
    MemoryRegion *isa = g_new(MemoryRegion, 1);
    MemoryRegion *ram_memories
        = g_malloc(PPC440EP_SDRAM_NR_BANKS * sizeof(*ram_memories));
    hwaddr ram_bases[PPC440EP_SDRAM_NR_BANKS];
    hwaddr ram_sizes[PPC440EP_SDRAM_NR_BANKS];
    qemu_irq *pic;
    qemu_irq *irqs;
    PCIBus *pcibus;
    PowerPCCPU *cpu;
    CPUPPCState *env;
    uint64_t elf_entry;
    uint64_t elf_lowaddr;
    hwaddr loadaddr = 0;
    target_long initrd_size = 0;
    DeviceState *dev;
    int success;
    int i;

    /* Setup CPU. */
    if (cpu_model == NULL) {
        cpu_model = "440EP";
    }
    cpu = cpu_ppc_init(cpu_model);
    if (cpu == NULL) {
        fprintf(stderr, "Unable to initialize CPU!\n");
        exit(1);
    }
    env = &cpu->env;

    qemu_register_reset(main_cpu_reset, cpu);
    ppc_booke_timers_init(cpu, 400000000, 0);
    ppc_dcr_init(env, NULL, NULL);

    /* interrupt controller */
    irqs = g_malloc0(sizeof(qemu_irq) * PPCUIC_OUTPUT_NB);
    irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT];
    irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT];
    pic = ppcuic_init(env, irqs, 0x0C0, 0, 1);

    /* SDRAM controller */
    memset(ram_bases, 0, sizeof(ram_bases));
    memset(ram_sizes, 0, sizeof(ram_sizes));
    ram_size = ppc4xx_sdram_adjust(ram_size, PPC440EP_SDRAM_NR_BANKS,
                                   ram_memories,
                                   ram_bases, ram_sizes,
                                   ppc440ep_sdram_bank_sizes);
    /* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */
    ppc4xx_sdram_init(env, pic[14], PPC440EP_SDRAM_NR_BANKS, ram_memories,
                      ram_bases, ram_sizes, 1);

    /* PCI */
    dev = sysbus_create_varargs(TYPE_PPC4xx_PCI_HOST_BRIDGE,
                                PPC440EP_PCI_CONFIG,
                                pic[pci_irq_nrs[0]], pic[pci_irq_nrs[1]],
                                pic[pci_irq_nrs[2]], pic[pci_irq_nrs[3]],
                                NULL);
    pcibus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
    if (!pcibus) {
        fprintf(stderr, "couldn't create PCI controller!\n");
        exit(1);
    }

    memory_region_init_alias(isa, NULL, "isa_mmio",
                             get_system_io(), 0, PPC440EP_PCI_IOLEN);
    memory_region_add_subregion(get_system_memory(), PPC440EP_PCI_IO, isa);

    if (serial_hds[0] != NULL) {
        serial_mm_init(address_space_mem, 0xef600300, 0, pic[0],
                       PPC_SERIAL_MM_BAUDBASE, serial_hds[0],
                       DEVICE_BIG_ENDIAN);
    }
    if (serial_hds[1] != NULL) {
        serial_mm_init(address_space_mem, 0xef600400, 0, pic[1],
                       PPC_SERIAL_MM_BAUDBASE, serial_hds[1],
                       DEVICE_BIG_ENDIAN);
    }

    if (pcibus) {
        /* Register network interfaces. */
        for (i = 0; i < nb_nics; i++) {
            /* There are no PCI NICs on the Bamboo board, but there are
             * PCI slots, so we can pick whatever default model we want. */
            pci_nic_init_nofail(&nd_table[i], pcibus, "e1000", NULL);
        }
    }

    /* Load kernel. */
    if (kernel_filename) {
        success = load_uimage(kernel_filename, &entry, &loadaddr, NULL);
        if (success < 0) {
            success = load_elf(kernel_filename, NULL, NULL, &elf_entry,
                               &elf_lowaddr, NULL, 1, ELF_MACHINE, 0);
            entry = elf_entry;
            loadaddr = elf_lowaddr;
        }
        /* XXX try again as binary */
        if (success < 0) {
            fprintf(stderr, "qemu: could not load kernel '%s'\n",
                    kernel_filename);
            exit(1);
        }
    }

    /* Load initrd. */
    if (initrd_filename) {
        initrd_size = load_image_targphys(initrd_filename, RAMDISK_ADDR,
                                          ram_size - RAMDISK_ADDR);

        if (initrd_size < 0) {
            fprintf(stderr, "qemu: could not load ram disk '%s' at %x\n",
                    initrd_filename, RAMDISK_ADDR);
            exit(1);
        }
    }

    /* If we're loading a kernel directly, we must load the device tree too. */
    if (kernel_filename) {
        if (bamboo_load_device_tree(FDT_ADDR, ram_size, RAMDISK_ADDR,
                                    initrd_size, kernel_cmdline) < 0) {
            fprintf(stderr, "couldn't load device tree\n");
            exit(1);
        }
    }

    if (kvm_enabled())
        kvmppc_init();
}
Ejemplo n.º 15
0
Archivo: boston.c Proyecto: mdroth/qemu
static void boston_mach_init(MachineState *machine)
{
    DeviceState *dev;
    BostonState *s;
    Error *err = NULL;
    const char *cpu_model;
    MemoryRegion *flash, *ddr, *ddr_low_alias, *lcd, *platreg;
    MemoryRegion *sys_mem = get_system_memory();
    XilinxPCIEHost *pcie2;
    PCIDevice *ahci;
    DriveInfo *hd[6];
    Chardev *chr;
    int fw_size, fit_err;
    bool is_64b;

    if ((machine->ram_size % G_BYTE) ||
        (machine->ram_size > (2 * G_BYTE))) {
        error_report("Memory size must be 1GB or 2GB");
        exit(1);
    }

    cpu_model = machine->cpu_model ?: "I6400";

    dev = qdev_create(NULL, TYPE_MIPS_BOSTON);
    qdev_init_nofail(dev);

    s = BOSTON(dev);
    s->mach = machine;
    s->cps = g_new0(MIPSCPSState, 1);

    if (!cpu_supports_cps_smp(cpu_model)) {
        error_report("Boston requires CPUs which support CPS");
        exit(1);
    }

    is_64b = cpu_supports_isa(cpu_model, ISA_MIPS64);

    object_initialize(s->cps, sizeof(MIPSCPSState), TYPE_MIPS_CPS);
    qdev_set_parent_bus(DEVICE(s->cps), sysbus_get_default());

    object_property_set_str(OBJECT(s->cps), cpu_model, "cpu-model", &err);
    object_property_set_int(OBJECT(s->cps), smp_cpus, "num-vp", &err);
    object_property_set_bool(OBJECT(s->cps), true, "realized", &err);

    if (err != NULL) {
        error_report("%s", error_get_pretty(err));
        exit(1);
    }

    sysbus_mmio_map_overlap(SYS_BUS_DEVICE(s->cps), 0, 0, 1);

    flash =  g_new(MemoryRegion, 1);
    memory_region_init_rom_device(flash, NULL, &boston_flash_ops, s,
                                  "boston.flash", 128 * M_BYTE, &err);
    memory_region_add_subregion_overlap(sys_mem, 0x18000000, flash, 0);

    ddr = g_new(MemoryRegion, 1);
    memory_region_allocate_system_memory(ddr, NULL, "boston.ddr",
                                         machine->ram_size);
    memory_region_add_subregion_overlap(sys_mem, 0x80000000, ddr, 0);

    ddr_low_alias = g_new(MemoryRegion, 1);
    memory_region_init_alias(ddr_low_alias, NULL, "boston_low.ddr",
                             ddr, 0, MIN(machine->ram_size, (256 * M_BYTE)));
    memory_region_add_subregion_overlap(sys_mem, 0, ddr_low_alias, 0);

    xilinx_pcie_init(sys_mem, 0,
                     0x10000000, 32 * M_BYTE,
                     0x40000000, 1 * G_BYTE,
                     get_cps_irq(s->cps, 2), false);

    xilinx_pcie_init(sys_mem, 1,
                     0x12000000, 32 * M_BYTE,
                     0x20000000, 512 * M_BYTE,
                     get_cps_irq(s->cps, 1), false);

    pcie2 = xilinx_pcie_init(sys_mem, 2,
                             0x14000000, 32 * M_BYTE,
                             0x16000000, 1 * M_BYTE,
                             get_cps_irq(s->cps, 0), true);

    platreg = g_new(MemoryRegion, 1);
    memory_region_init_io(platreg, NULL, &boston_platreg_ops, s,
                          "boston-platregs", 0x1000);
    memory_region_add_subregion_overlap(sys_mem, 0x17ffd000, platreg, 0);

    if (!serial_hds[0]) {
        serial_hds[0] = qemu_chr_new("serial0", "null");
    }

    s->uart = serial_mm_init(sys_mem, 0x17ffe000, 2,
                             get_cps_irq(s->cps, 3), 10000000,
                             serial_hds[0], DEVICE_NATIVE_ENDIAN);

    lcd = g_new(MemoryRegion, 1);
    memory_region_init_io(lcd, NULL, &boston_lcd_ops, s, "boston-lcd", 0x8);
    memory_region_add_subregion_overlap(sys_mem, 0x17fff000, lcd, 0);

    chr = qemu_chr_new("lcd", "vc:320x240");
    qemu_chr_fe_init(&s->lcd_display, chr, NULL);
    qemu_chr_fe_set_handlers(&s->lcd_display, NULL, NULL,
                             boston_lcd_event, s, NULL, true);

    ahci = pci_create_simple_multifunction(&PCI_BRIDGE(&pcie2->root)->sec_bus,
                                           PCI_DEVFN(0, 0),
                                           true, TYPE_ICH9_AHCI);
    g_assert(ARRAY_SIZE(hd) == ICH_AHCI(ahci)->ahci.ports);
    ide_drive_get(hd, ICH_AHCI(ahci)->ahci.ports);
    ahci_ide_create_devs(ahci, hd);

    if (machine->firmware) {
        fw_size = load_image_targphys(machine->firmware,
                                      0x1fc00000, 4 * M_BYTE);
        if (fw_size == -1) {
            error_printf("unable to load firmware image '%s'\n",
                          machine->firmware);
            exit(1);
        }
    } else if (machine->kernel_filename) {
        fit_err = load_fit(&boston_fit_loader, machine->kernel_filename, s);
        if (fit_err) {
            error_printf("unable to load FIT image\n");
            exit(1);
        }

        gen_firmware(memory_region_get_ram_ptr(flash) + 0x7c00000,
                     s->kernel_entry, s->fdt_base, is_64b);
    } else if (!qtest_enabled()) {
        error_printf("Please provide either a -kernel or -bios argument\n");
        exit(1);
    }
}
Ejemplo n.º 16
0
static void sun4uv_init(MemoryRegion *address_space_mem,
                        MachineState *machine,
                        const struct hwdef *hwdef)
{
    SPARCCPU *cpu;
    Nvram *nvram;
    unsigned int i;
    uint64_t initrd_addr, initrd_size, kernel_addr, kernel_size, kernel_entry;
    PCIBus *pci_bus, *pci_bus2, *pci_bus3;
    ISABus *isa_bus;
    SysBusDevice *s;
    qemu_irq *ivec_irqs, *pbm_irqs;
    DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
    DriveInfo *fd[MAX_FD];
    FWCfgState *fw_cfg;

    /* init CPUs */
    cpu = cpu_devinit(machine->cpu_model, hwdef);

    /* set up devices */
    ram_init(0, machine->ram_size);

    prom_init(hwdef->prom_addr, bios_name);

    ivec_irqs = qemu_allocate_irqs(cpu_set_ivec_irq, cpu, IVEC_MAX);
    pci_bus = pci_apb_init(APB_SPECIAL_BASE, APB_MEM_BASE, ivec_irqs, &pci_bus2,
                           &pci_bus3, &pbm_irqs);
    pci_vga_init(pci_bus);

    // XXX Should be pci_bus3
    isa_bus = pci_ebus_init(pci_bus, -1, pbm_irqs);

    i = 0;
    if (hwdef->console_serial_base) {
        serial_mm_init(address_space_mem, hwdef->console_serial_base, 0,
                       NULL, 115200, serial_hds[i], DEVICE_BIG_ENDIAN);
        i++;
    }

    serial_hds_isa_init(isa_bus, MAX_SERIAL_PORTS);
    parallel_hds_isa_init(isa_bus, MAX_PARALLEL_PORTS);

    for(i = 0; i < nb_nics; i++)
        pci_nic_init_nofail(&nd_table[i], pci_bus, "ne2k_pci", NULL);

    ide_drive_get(hd, ARRAY_SIZE(hd));

    pci_cmd646_ide_init(pci_bus, hd, 1);

    isa_create_simple(isa_bus, "i8042");
    for(i = 0; i < MAX_FD; i++) {
        fd[i] = drive_get(IF_FLOPPY, 0, i);
    }
    fdctrl_init_isa(isa_bus, fd);

    /* Map NVRAM into I/O (ebus) space */
    nvram = m48t59_init(NULL, 0, 0, NVRAM_SIZE, 1968, 59);
    s = SYS_BUS_DEVICE(nvram);
    memory_region_add_subregion(get_system_io(), 0x2000,
                                sysbus_mmio_get_region(s, 0));
 
    initrd_size = 0;
    initrd_addr = 0;
    kernel_size = sun4u_load_kernel(machine->kernel_filename,
                                    machine->initrd_filename,
                                    ram_size, &initrd_size, &initrd_addr,
                                    &kernel_addr, &kernel_entry);

    sun4u_NVRAM_set_params(nvram, NVRAM_SIZE, "Sun4u", machine->ram_size,
                           machine->boot_order,
                           kernel_addr, kernel_size,
                           machine->kernel_cmdline,
                           initrd_addr, initrd_size,
                           /* XXX: need an option to load a NVRAM image */
                           0,
                           graphic_width, graphic_height, graphic_depth,
                           (uint8_t *)&nd_table[0].macaddr);

    fw_cfg = fw_cfg_init_io(BIOS_CFG_IOPORT);
    fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
    fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
    fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, hwdef->machine_id);
    fw_cfg_add_i64(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_entry);
    fw_cfg_add_i64(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
    if (machine->kernel_cmdline) {
        fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
                       strlen(machine->kernel_cmdline) + 1);
        fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, machine->kernel_cmdline);
    } else {
        fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, 0);
    }
    fw_cfg_add_i64(fw_cfg, FW_CFG_INITRD_ADDR, initrd_addr);
    fw_cfg_add_i64(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
    fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, machine->boot_order[0]);

    fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_WIDTH, graphic_width);
    fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_HEIGHT, graphic_height);
    fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_DEPTH, graphic_depth);

    qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
Ejemplo n.º 17
0
static void
petalogix_ml605_init(QEMUMachineInitArgs *args)
{
    ram_addr_t ram_size = args->ram_size;
    const char *cpu_model = args->cpu_model;
    MemoryRegion *address_space_mem = get_system_memory();
    DeviceState *dev, *dma, *eth0;
    MicroBlazeCPU *cpu;
    SysBusDevice *busdev;
    CPUMBState *env;
    DriveInfo *dinfo;
    int i;
    hwaddr ddr_base = MEMORY_BASEADDR;
    MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
    MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
    qemu_irq irq[32], *cpu_irq;

    /* init CPUs */
    if (cpu_model == NULL) {
        cpu_model = "microblaze";
    }
    cpu = cpu_mb_init(cpu_model);
    env = &cpu->env;

    /* Attach emulated BRAM through the LMB.  */
    memory_region_init_ram(phys_lmb_bram, "petalogix_ml605.lmb_bram",
                           LMB_BRAM_SIZE);
    vmstate_register_ram_global(phys_lmb_bram);
    memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram);

    memory_region_init_ram(phys_ram, "petalogix_ml605.ram", ram_size);
    vmstate_register_ram_global(phys_ram);
    memory_region_add_subregion(address_space_mem, ddr_base, phys_ram);

    dinfo = drive_get(IF_PFLASH, 0, 0);
    /* 5th parameter 2 means bank-width
     * 10th paremeter 0 means little-endian */
    pflash_cfi01_register(FLASH_BASEADDR,
                          NULL, "petalogix_ml605.flash", FLASH_SIZE,
                          dinfo ? dinfo->bdrv : NULL, (64 * 1024),
                          FLASH_SIZE >> 16,
                          2, 0x89, 0x18, 0x0000, 0x0, 0);


    cpu_irq = microblaze_pic_init_cpu(env);
    dev = xilinx_intc_create(INTC_BASEADDR, cpu_irq[0], 4);
    for (i = 0; i < 32; i++) {
        irq[i] = qdev_get_gpio_in(dev, i);
    }

    serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2,
                   irq[5], 115200, serial_hds[0], DEVICE_LITTLE_ENDIAN);

    /* 2 timers at irq 2 @ 100 Mhz.  */
    xilinx_timer_create(TIMER_BASEADDR, irq[2], 0, 100 * 1000000);

    /* axi ethernet and dma initialization. */
    dma = qdev_create(NULL, "xlnx.axi-dma");

    /* FIXME: attach to the sysbus instead */
    object_property_add_child(container_get(qdev_get_machine(), "/unattached"),
                                  "xilinx-dma", OBJECT(dma), NULL);

    eth0 = xilinx_axiethernet_create(&nd_table[0], STREAM_SLAVE(dma),
                                     0x82780000, irq[3], 0x1000, 0x1000);

    xilinx_axiethernetdma_init(dma, STREAM_SLAVE(eth0),
                               0x84600000, irq[1], irq[0], 100 * 1000000);

    {
        SSIBus *spi;

        dev = qdev_create(NULL, "xlnx.xps-spi");
        qdev_prop_set_uint8(dev, "num-ss-bits", NUM_SPI_FLASHES);
        qdev_init_nofail(dev);
        busdev = SYS_BUS_DEVICE(dev);
        sysbus_mmio_map(busdev, 0, 0x40a00000);
        sysbus_connect_irq(busdev, 0, irq[4]);

        spi = (SSIBus *)qdev_get_child_bus(dev, "spi");

        for (i = 0; i < NUM_SPI_FLASHES; i++) {
            qemu_irq cs_line;

            dev = ssi_create_slave_no_init(spi, "m25p80");
            qdev_prop_set_string(dev, "partname", "n25q128");
            qdev_init_nofail(dev);
            cs_line = qdev_get_gpio_in(dev, 0);
            sysbus_connect_irq(busdev, i+1, cs_line);
        }
    }

    microblaze_load_kernel(cpu, ddr_base, ram_size, BINARY_DEVICE_TREE_FILE,
                                                            machine_cpu_reset);

}
Ejemplo n.º 18
0
static
void mips_jazz_init (ram_addr_t ram_size,
                     const char *cpu_model,
                     enum jazz_model_e jazz_model)
{
    char *filename;
    int bios_size, n;
    CPUState *env;
    qemu_irq *rc4030, *i8259;
    rc4030_dma *dmas;
    void* rc4030_opaque;
    int s_rtc, s_dma_dummy;
    NICInfo *nd;
    PITState *pit;
    DriveInfo *fds[MAX_FD];
    qemu_irq esp_reset;
    ram_addr_t ram_offset;
    ram_addr_t bios_offset;

    /* init CPUs */
    if (cpu_model == NULL) {
#ifdef TARGET_MIPS64
        cpu_model = "R4000";
#else
        /* FIXME: All wrong, this maybe should be R3000 for the older JAZZs. */
        cpu_model = "24Kf";
#endif
    }
    env = cpu_init(cpu_model);
    if (!env) {
        fprintf(stderr, "Unable to find CPU definition\n");
        exit(1);
    }
    qemu_register_reset(main_cpu_reset, env);

    /* allocate RAM */
    ram_offset = qemu_ram_alloc(ram_size);
    cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);

    bios_offset = qemu_ram_alloc(MAGNUM_BIOS_SIZE);
    cpu_register_physical_memory(0x1fc00000LL,
                                 MAGNUM_BIOS_SIZE, bios_offset | IO_MEM_ROM);
    cpu_register_physical_memory(0xfff00000LL,
                                 MAGNUM_BIOS_SIZE, bios_offset | IO_MEM_ROM);

    /* load the BIOS image. */
    if (bios_name == NULL)
        bios_name = BIOS_FILENAME;
    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
    if (filename) {
        bios_size = load_image_targphys(filename, 0xfff00000LL,
                                        MAGNUM_BIOS_SIZE);
        qemu_free(filename);
    } else {
        bios_size = -1;
    }
    if (bios_size < 0 || bios_size > MAGNUM_BIOS_SIZE) {
        fprintf(stderr, "qemu: Could not load MIPS bios '%s'\n",
                bios_name);
        exit(1);
    }

    /* Init CPU internal devices */
    cpu_mips_irq_init_cpu(env);
    cpu_mips_clock_init(env);

    /* Chipset */
    rc4030_opaque = rc4030_init(env->irq[6], env->irq[3], &rc4030, &dmas);
    s_dma_dummy = cpu_register_io_memory(dma_dummy_read, dma_dummy_write, NULL);
    cpu_register_physical_memory(0x8000d000, 0x00001000, s_dma_dummy);

    /* ISA devices */
    i8259 = i8259_init(env->irq[4]);
    isa_bus_new(NULL);
    isa_bus_irqs(i8259);
    DMA_init(0);
    pit = pit_init(0x40, i8259[0]);
    pcspk_init(pit);

    /* ISA IO space at 0x90000000 */
    isa_mmio_init(0x90000000, 0x01000000);
    isa_mem_base = 0x11000000;

    /* Video card */
    switch (jazz_model) {
    case JAZZ_MAGNUM:
        g364fb_mm_init(0x40000000, 0x60000000, 0, rc4030[3]);
        break;
    case JAZZ_PICA61:
        isa_vga_mm_init(0x40000000, 0x60000000, 0);
        break;
    default:
        break;
    }

    /* Network controller */
    for (n = 0; n < nb_nics; n++) {
        nd = &nd_table[n];
        if (!nd->model)
            nd->model = qemu_strdup("dp83932");
        if (strcmp(nd->model, "dp83932") == 0) {
            dp83932_init(nd, 0x80001000, 2, rc4030[4],
                         rc4030_opaque, rc4030_dma_memory_rw);
            break;
        } else if (strcmp(nd->model, "?") == 0) {
            fprintf(stderr, "qemu: Supported NICs: dp83932\n");
            exit(1);
        } else {
            fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
            exit(1);
        }
    }

    /* SCSI adapter */
    esp_init(0x80002000, 0,
             rc4030_dma_read, rc4030_dma_write, dmas[0],
             rc4030[5], &esp_reset);

    /* Floppy */
    if (drive_get_max_bus(IF_FLOPPY) >= MAX_FD) {
        fprintf(stderr, "qemu: too many floppy drives\n");
        exit(1);
    }
    for (n = 0; n < MAX_FD; n++) {
        fds[n] = drive_get(IF_FLOPPY, 0, n);
    }
    fdctrl_init_sysbus(rc4030[1], 0, 0x80003000, fds);

    /* Real time clock */
    rtc_init(1980);
    s_rtc = cpu_register_io_memory(rtc_read, rtc_write, NULL);
    cpu_register_physical_memory(0x80004000, 0x00001000, s_rtc);

    /* Keyboard (i8042) */
    i8042_mm_init(rc4030[6], rc4030[7], 0x80005000, 0x1000, 0x1);

    /* Serial ports */
    if (serial_hds[0])
        serial_mm_init(0x80006000, 0, rc4030[8], 8000000/16, serial_hds[0], 1);
    if (serial_hds[1])
        serial_mm_init(0x80007000, 0, rc4030[9], 8000000/16, serial_hds[1], 1);

    /* Parallel port */
    if (parallel_hds[0])
        parallel_mm_init(0x80008000, 0, rc4030[0], parallel_hds[0]);

    /* Sound card */
    /* FIXME: missing Jazz sound at 0x8000c000, rc4030[2] */
#ifdef HAS_AUDIO
    audio_init(i8259);
#endif

    /* NVRAM: Unprotected at 0x9000, Protected at 0xa000, Read only at 0xb000 */
    ds1225y_init(0x80009000, "nvram");

    /* LED indicator */
    jazz_led_init(0x8000f000);
}
Ejemplo n.º 19
0
static void lx_init(const LxBoardDesc *board,
        ram_addr_t ram_size, const char *boot_device,
        const char *kernel_filename, const char *kernel_cmdline,
        const char *initrd_filename, const char *cpu_model)
{
#ifdef TARGET_WORDS_BIGENDIAN
    int be = 1;
#else
    int be = 0;
#endif
    MemoryRegion *system_memory = get_system_memory();
    CPUXtensaState *env = NULL;
    MemoryRegion *ram, *rom, *system_io;
    DriveInfo *dinfo;
    pflash_t *flash = NULL;
    int n;

    if (!cpu_model) {
        cpu_model = "dc232b";
    }

    for (n = 0; n < smp_cpus; n++) {
        env = cpu_init(cpu_model);
        if (!env) {
            fprintf(stderr, "Unable to find CPU definition\n");
            exit(1);
        }
        env->sregs[PRID] = n;
        qemu_register_reset(lx60_reset, env);
        /* Need MMU initialized prior to ELF loading,
         * so that ELF gets loaded into virtual addresses
         */
        cpu_state_reset(env);
    }

    ram = g_malloc(sizeof(*ram));
    memory_region_init_ram(ram, "lx60.dram", ram_size);
    vmstate_register_ram_global(ram);
    memory_region_add_subregion(system_memory, 0, ram);

    system_io = g_malloc(sizeof(*system_io));
    memory_region_init(system_io, "lx60.io", 224 * 1024 * 1024);
    memory_region_add_subregion(system_memory, 0xf0000000, system_io);
    lx60_fpga_init(system_io, 0x0d020000);
    if (nd_table[0].vlan) {
        lx60_net_init(system_io, 0x0d030000, 0x0d030400, 0x0d800000,
                xtensa_get_extint(env, 1), nd_table);
    }

    if (!serial_hds[0]) {
        serial_hds[0] = qemu_chr_new("serial0", "null", NULL);
    }

    serial_mm_init(system_io, 0x0d050020, 2, xtensa_get_extint(env, 0),
            115200, serial_hds[0], DEVICE_NATIVE_ENDIAN);

    dinfo = drive_get(IF_PFLASH, 0, 0);
    if (dinfo) {
        flash = pflash_cfi01_register(0xf8000000,
                NULL, "lx60.io.flash", board->flash_size,
                dinfo->bdrv, board->flash_sector_size,
                board->flash_size / board->flash_sector_size,
                4, 0x0000, 0x0000, 0x0000, 0x0000, be);
        if (flash == NULL) {
            fprintf(stderr, "Unable to mount pflash\n");
            exit(1);
        }
    }

    /* Use presence of kernel file name as 'boot from SRAM' switch. */
    if (kernel_filename) {
        rom = g_malloc(sizeof(*rom));
        memory_region_init_ram(rom, "lx60.sram", board->sram_size);
        vmstate_register_ram_global(rom);
        memory_region_add_subregion(system_memory, 0xfe000000, rom);

        /* Put kernel bootparameters to the end of that SRAM */
        if (kernel_cmdline) {
            size_t cmdline_size = strlen(kernel_cmdline) + 1;
            size_t bp_size = sizeof(BpTag[4]) + cmdline_size;
            uint32_t tagptr = (0xfe000000 + board->sram_size - bp_size) & ~0xff;

            env->regs[2] = tagptr;

            tagptr = put_tag(tagptr, 0x7b0b, 0, NULL);
            if (cmdline_size > 1) {
                tagptr = put_tag(tagptr, 0x1001,
                        cmdline_size, kernel_cmdline);
            }
            tagptr = put_tag(tagptr, 0x7e0b, 0, NULL);
        }
        uint64_t elf_entry;
        uint64_t elf_lowaddr;
        int success = load_elf(kernel_filename, translate_phys_addr, env,
                &elf_entry, &elf_lowaddr, NULL, be, ELF_MACHINE, 0);
        if (success > 0) {
            env->pc = elf_entry;
        }
    } else {
        if (flash) {
            MemoryRegion *flash_mr = pflash_cfi01_get_memory(flash);
            MemoryRegion *flash_io = g_malloc(sizeof(*flash_io));

            memory_region_init_alias(flash_io, "lx60.flash",
                    flash_mr, 0, board->flash_size);
            memory_region_add_subregion(system_memory, 0xfe000000,
                    flash_io);
        }
    }
}
Ejemplo n.º 20
0
static void mips_jazz_init(MachineState *machine,
                           enum jazz_model_e jazz_model)
{
    MemoryRegion *address_space = get_system_memory();
    char *filename;
    int bios_size, n;
    MIPSCPU *cpu;
    CPUClass *cc;
    CPUMIPSState *env;
    qemu_irq *i8259;
    rc4030_dma *dmas;
    IOMMUMemoryRegion *rc4030_dma_mr;
    MemoryRegion *isa_mem = g_new(MemoryRegion, 1);
    MemoryRegion *isa_io = g_new(MemoryRegion, 1);
    MemoryRegion *rtc = g_new(MemoryRegion, 1);
    MemoryRegion *i8042 = g_new(MemoryRegion, 1);
    MemoryRegion *dma_dummy = g_new(MemoryRegion, 1);
    NICInfo *nd;
    DeviceState *dev, *rc4030;
    SysBusDevice *sysbus;
    ISABus *isa_bus;
    ISADevice *pit;
    DriveInfo *fds[MAX_FD];
    qemu_irq esp_reset, dma_enable;
    MemoryRegion *ram = g_new(MemoryRegion, 1);
    MemoryRegion *bios = g_new(MemoryRegion, 1);
    MemoryRegion *bios2 = g_new(MemoryRegion, 1);

    /* init CPUs */
    cpu = MIPS_CPU(cpu_create(machine->cpu_type));
    env = &cpu->env;
    qemu_register_reset(main_cpu_reset, cpu);

    /* Chipset returns 0 in invalid reads and do not raise data exceptions.
     * However, we can't simply add a global memory region to catch
     * everything, as memory core directly call unassigned_mem_read/write
     * on some invalid accesses, which call do_unassigned_access on the
     * CPU, which raise an exception.
     * Handle that case by hijacking the do_unassigned_access method on
     * the CPU, and do not raise exceptions for data access. */
    cc = CPU_GET_CLASS(cpu);
    real_do_unassigned_access = cc->do_unassigned_access;
    cc->do_unassigned_access = mips_jazz_do_unassigned_access;

    /* allocate RAM */
    memory_region_allocate_system_memory(ram, NULL, "mips_jazz.ram",
                                         machine->ram_size);
    memory_region_add_subregion(address_space, 0, ram);

    memory_region_init_ram(bios, NULL, "mips_jazz.bios", MAGNUM_BIOS_SIZE,
                           &error_fatal);
    memory_region_set_readonly(bios, true);
    memory_region_init_alias(bios2, NULL, "mips_jazz.bios", bios,
                             0, MAGNUM_BIOS_SIZE);
    memory_region_add_subregion(address_space, 0x1fc00000LL, bios);
    memory_region_add_subregion(address_space, 0xfff00000LL, bios2);

    /* load the BIOS image. */
    if (bios_name == NULL)
        bios_name = BIOS_FILENAME;
    filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
    if (filename) {
        bios_size = load_image_targphys(filename, 0xfff00000LL,
                                        MAGNUM_BIOS_SIZE);
        g_free(filename);
    } else {
        bios_size = -1;
    }
    if ((bios_size < 0 || bios_size > MAGNUM_BIOS_SIZE) && !qtest_enabled()) {
        error_report("Could not load MIPS bios '%s'", bios_name);
        exit(1);
    }

    /* Init CPU internal devices */
    cpu_mips_irq_init_cpu(cpu);
    cpu_mips_clock_init(cpu);

    /* Chipset */
    rc4030 = rc4030_init(&dmas, &rc4030_dma_mr);
    sysbus = SYS_BUS_DEVICE(rc4030);
    sysbus_connect_irq(sysbus, 0, env->irq[6]);
    sysbus_connect_irq(sysbus, 1, env->irq[3]);
    memory_region_add_subregion(address_space, 0x80000000,
                                sysbus_mmio_get_region(sysbus, 0));
    memory_region_add_subregion(address_space, 0xf0000000,
                                sysbus_mmio_get_region(sysbus, 1));
    memory_region_init_io(dma_dummy, NULL, &dma_dummy_ops, NULL, "dummy_dma", 0x1000);
    memory_region_add_subregion(address_space, 0x8000d000, dma_dummy);

    /* ISA bus: IO space at 0x90000000, mem space at 0x91000000 */
    memory_region_init(isa_io, NULL, "isa-io", 0x00010000);
    memory_region_init(isa_mem, NULL, "isa-mem", 0x01000000);
    memory_region_add_subregion(address_space, 0x90000000, isa_io);
    memory_region_add_subregion(address_space, 0x91000000, isa_mem);
    isa_bus = isa_bus_new(NULL, isa_mem, isa_io, &error_abort);

    /* ISA devices */
    i8259 = i8259_init(isa_bus, env->irq[4]);
    isa_bus_irqs(isa_bus, i8259);
    DMA_init(isa_bus, 0);
    pit = pit_init(isa_bus, 0x40, 0, NULL);
    pcspk_init(isa_bus, pit);

    /* Video card */
    switch (jazz_model) {
    case JAZZ_MAGNUM:
        dev = qdev_create(NULL, "sysbus-g364");
        qdev_init_nofail(dev);
        sysbus = SYS_BUS_DEVICE(dev);
        sysbus_mmio_map(sysbus, 0, 0x60080000);
        sysbus_mmio_map(sysbus, 1, 0x40000000);
        sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 3));
        {
            /* Simple ROM, so user doesn't have to provide one */
            MemoryRegion *rom_mr = g_new(MemoryRegion, 1);
            memory_region_init_ram(rom_mr, NULL, "g364fb.rom", 0x80000,
                                   &error_fatal);
            memory_region_set_readonly(rom_mr, true);
            uint8_t *rom = memory_region_get_ram_ptr(rom_mr);
            memory_region_add_subregion(address_space, 0x60000000, rom_mr);
            rom[0] = 0x10; /* Mips G364 */
        }
        break;
    case JAZZ_PICA61:
        isa_vga_mm_init(0x40000000, 0x60000000, 0, get_system_memory());
        break;
    default:
        break;
    }

    /* Network controller */
    for (n = 0; n < nb_nics; n++) {
        nd = &nd_table[n];
        if (!nd->model)
            nd->model = g_strdup("dp83932");
        if (strcmp(nd->model, "dp83932") == 0) {
            qemu_check_nic_model(nd, "dp83932");

            dev = qdev_create(NULL, "dp8393x");
            qdev_set_nic_properties(dev, nd);
            qdev_prop_set_uint8(dev, "it_shift", 2);
            qdev_prop_set_ptr(dev, "dma_mr", rc4030_dma_mr);
            qdev_init_nofail(dev);
            sysbus = SYS_BUS_DEVICE(dev);
            sysbus_mmio_map(sysbus, 0, 0x80001000);
            sysbus_mmio_map(sysbus, 1, 0x8000b000);
            sysbus_connect_irq(sysbus, 0, qdev_get_gpio_in(rc4030, 4));
            break;
        } else if (is_help_option(nd->model)) {
            fprintf(stderr, "qemu: Supported NICs: dp83932\n");
            exit(1);
        } else {
            fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
            exit(1);
        }
    }

    /* SCSI adapter */
    esp_init(0x80002000, 0,
             rc4030_dma_read, rc4030_dma_write, dmas[0],
             qdev_get_gpio_in(rc4030, 5), &esp_reset, &dma_enable);

    /* Floppy */
    for (n = 0; n < MAX_FD; n++) {
        fds[n] = drive_get(IF_FLOPPY, 0, n);
    }
    /* FIXME: we should enable DMA with a custom IsaDma device */
    fdctrl_init_sysbus(qdev_get_gpio_in(rc4030, 1), -1, 0x80003000, fds);

    /* Real time clock */
    rtc_init(isa_bus, 1980, NULL);
    memory_region_init_io(rtc, NULL, &rtc_ops, NULL, "rtc", 0x1000);
    memory_region_add_subregion(address_space, 0x80004000, rtc);

    /* Keyboard (i8042) */
    i8042_mm_init(qdev_get_gpio_in(rc4030, 6), qdev_get_gpio_in(rc4030, 7),
                  i8042, 0x1000, 0x1);
    memory_region_add_subregion(address_space, 0x80005000, i8042);

    /* Serial ports */
    if (serial_hds[0]) {
        serial_mm_init(address_space, 0x80006000, 0,
                       qdev_get_gpio_in(rc4030, 8), 8000000/16,
                       serial_hds[0], DEVICE_NATIVE_ENDIAN);
    }
    if (serial_hds[1]) {
        serial_mm_init(address_space, 0x80007000, 0,
                       qdev_get_gpio_in(rc4030, 9), 8000000/16,
                       serial_hds[1], DEVICE_NATIVE_ENDIAN);
    }

    /* Parallel port */
    if (parallel_hds[0])
        parallel_mm_init(address_space, 0x80008000, 0,
                         qdev_get_gpio_in(rc4030, 0), parallel_hds[0]);

    /* FIXME: missing Jazz sound at 0x8000c000, rc4030[2] */

    /* NVRAM */
    dev = qdev_create(NULL, "ds1225y");
    qdev_init_nofail(dev);
    sysbus = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(sysbus, 0, 0x80009000);

    /* LED indicator */
    sysbus_create_simple("jazz-led", 0x8000f000, NULL);
}
Ejemplo n.º 21
0
Archivo: kzm.c Proyecto: Aakriti/qemu
static void kzm_init(QEMUMachineInitArgs *args)
{
    ram_addr_t ram_size = args->ram_size;
    const char *cpu_model = args->cpu_model;
    const char *kernel_filename = args->kernel_filename;
    const char *kernel_cmdline = args->kernel_cmdline;
    const char *initrd_filename = args->initrd_filename;
    ARMCPU *cpu;
    MemoryRegion *address_space_mem = get_system_memory();
    MemoryRegion *ram = g_new(MemoryRegion, 1);
    MemoryRegion *sram = g_new(MemoryRegion, 1);
    MemoryRegion *ram_alias = g_new(MemoryRegion, 1);
    DeviceState *dev;
    DeviceState *ccm;

    if (!cpu_model) {
        cpu_model = "arm1136";
    }

    cpu = cpu_arm_init(cpu_model);
    if (!cpu) {
        fprintf(stderr, "Unable to find CPU definition\n");
        exit(1);
    }

    /* On a real system, the first 16k is a `secure boot rom' */

    memory_region_init_ram(ram, NULL, "kzm.ram", ram_size);
    vmstate_register_ram_global(ram);
    memory_region_add_subregion(address_space_mem, KZM_RAMADDRESS, ram);

    memory_region_init_alias(ram_alias, NULL, "ram.alias", ram, 0, ram_size);
    memory_region_add_subregion(address_space_mem, 0x88000000, ram_alias);

    memory_region_init_ram(sram, NULL, "kzm.sram", 0x4000);
    memory_region_add_subregion(address_space_mem, 0x1FFFC000, sram);

    dev = sysbus_create_varargs("imx_avic", 0x68000000,
                                qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ),
                                qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ),
                                NULL);

    imx_serial_create(0, 0x43f90000, qdev_get_gpio_in(dev, 45));
    imx_serial_create(1, 0x43f94000, qdev_get_gpio_in(dev, 32));

    ccm = sysbus_create_simple("imx_ccm", 0x53f80000, NULL);

    imx_timerp_create(0x53f94000, qdev_get_gpio_in(dev, 28), ccm);
    imx_timerp_create(0x53f98000, qdev_get_gpio_in(dev, 27), ccm);
    imx_timerg_create(0x53f90000, qdev_get_gpio_in(dev, 29), ccm);

    if (nd_table[0].used) {
        lan9118_init(&nd_table[0], 0xb6000000, qdev_get_gpio_in(dev, 52));
    }

    if (serial_hds[2]) { /* touchscreen */
        serial_mm_init(address_space_mem, KZM_FPGA+0x10, 0,
                       qdev_get_gpio_in(dev, 52),
                       14745600, serial_hds[2],
                       DEVICE_NATIVE_ENDIAN);
    }

    kzm_binfo.ram_size = ram_size;
    kzm_binfo.kernel_filename = kernel_filename;
    kzm_binfo.kernel_cmdline = kernel_cmdline;
    kzm_binfo.initrd_filename = initrd_filename;
    kzm_binfo.nb_cpus = 1;
    arm_load_kernel(cpu, &kzm_binfo);
}
Ejemplo n.º 22
0
static void virtex_init(QEMUMachineInitArgs *args)
{
    ram_addr_t ram_size = args->ram_size;
    const char *cpu_model = args->cpu_model;
    const char *kernel_filename = args->kernel_filename;
    const char *kernel_cmdline = args->kernel_cmdline;
    MemoryRegion *address_space_mem = get_system_memory();
    DeviceState *dev;
    PowerPCCPU *cpu;
    CPUPPCState *env;
    hwaddr ram_base = 0;
    DriveInfo *dinfo;
    MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
    qemu_irq irq[32], *cpu_irq;
    int kernel_size;
    int i;

    /* init CPUs */
    if (cpu_model == NULL) {
        cpu_model = "440-Xilinx";
    }

    cpu = ppc440_init_xilinx(&ram_size, 1, cpu_model, 400000000);
    env = &cpu->env;
    qemu_register_reset(main_cpu_reset, cpu);

    memory_region_init_ram(phys_ram, "ram", ram_size);
    vmstate_register_ram_global(phys_ram);
    memory_region_add_subregion(address_space_mem, ram_base, phys_ram);

    dinfo = drive_get(IF_PFLASH, 0, 0);
    pflash_cfi01_register(0xfc000000, NULL, "virtex.flash", FLASH_SIZE,
                          dinfo ? dinfo->bdrv : NULL, (64 * 1024),
                          FLASH_SIZE >> 16,
                          1, 0x89, 0x18, 0x0000, 0x0, 1);

    cpu_irq = (qemu_irq *) &env->irq_inputs[PPC40x_INPUT_INT];
    dev = xilinx_intc_create(0x81800000, cpu_irq[0], 0);
    for (i = 0; i < 32; i++) {
        irq[i] = qdev_get_gpio_in(dev, i);
    }

    serial_mm_init(address_space_mem, 0x83e01003ULL, 2, irq[9], 115200,
                   serial_hds[0], DEVICE_LITTLE_ENDIAN);

    /* 2 timers at irq 2 @ 62 Mhz.  */
    xilinx_timer_create(0x83c00000, irq[3], 0, 62 * 1000000);

    if (kernel_filename) {
        uint64_t entry, low, high;
        hwaddr boot_offset;

        /* Boots a kernel elf binary.  */
        kernel_size = load_elf(kernel_filename, NULL, NULL,
                               &entry, &low, &high, 1, ELF_MACHINE, 0);
        boot_info.bootstrap_pc = entry & 0x00ffffff;

        if (kernel_size < 0) {
            boot_offset = 0x1200000;
            /* If we failed loading ELF's try a raw image.  */
            kernel_size = load_image_targphys(kernel_filename,
                                              boot_offset,
                                              ram_size);
            boot_info.bootstrap_pc = boot_offset;
            high = boot_info.bootstrap_pc + kernel_size + 8192;
        }

        boot_info.ima_size = kernel_size;

        /* Provide a device-tree.  */
        boot_info.fdt = high + (8192 * 2);
        boot_info.fdt &= ~8191;
        xilinx_load_device_tree(boot_info.fdt, ram_size, 0, 0, kernel_cmdline);
    }
    env->load_info = &boot_info;
}
Ejemplo n.º 23
0
static void mpc8544ds_init(ram_addr_t ram_size,
                         const char *boot_device,
                         const char *kernel_filename,
                         const char *kernel_cmdline,
                         const char *initrd_filename,
                         const char *cpu_model)
{
    PCIBus *pci_bus;
    CPUState *env;
    uint64_t elf_entry;
    uint64_t elf_lowaddr;
    target_phys_addr_t entry=0;
    target_phys_addr_t loadaddr=UIMAGE_LOAD_BASE;
    target_long kernel_size=0;
    target_ulong dt_base = 0;
    target_ulong initrd_base = 0;
    target_long initrd_size=0;
    int i=0;
    unsigned int pci_irq_nrs[4] = {1, 2, 3, 4};
    qemu_irq *irqs, *mpic, *pci_irqs;
    SerialState * serial[2];

    /* Setup CPU */
    env = cpu_ppc_init("e500v2_v30");
    if (!env) {
        fprintf(stderr, "Unable to initialize CPU!\n");
        exit(1);
    }

    /* Fixup Memory size on a alignment boundary */
    ram_size &= ~(RAM_SIZES_ALIGN - 1);

    /* Register Memory */
    cpu_register_physical_memory(0, ram_size, qemu_ram_alloc(NULL,
                                 "mpc8544ds.ram", ram_size));

    /* MPIC */
    irqs = qemu_mallocz(sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
    irqs[OPENPIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPCE500_INPUT_INT];
    irqs[OPENPIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPCE500_INPUT_CINT];
    mpic = mpic_init(MPC8544_MPIC_REGS_BASE, 1, &irqs, NULL);

    /* Serial */
    if (serial_hds[0]) {
        serial[0] = serial_mm_init(MPC8544_SERIAL0_REGS_BASE,
                                   0, mpic[12+26], 399193,
                                   serial_hds[0], 1, 1);
    }

    if (serial_hds[1]) {
        serial[0] = serial_mm_init(MPC8544_SERIAL1_REGS_BASE,
                                   0, mpic[12+26], 399193,
                                   serial_hds[0], 1, 1);
    }

    /* PCI */
    pci_irqs = qemu_malloc(sizeof(qemu_irq) * 4);
    pci_irqs[0] = mpic[pci_irq_nrs[0]];
    pci_irqs[1] = mpic[pci_irq_nrs[1]];
    pci_irqs[2] = mpic[pci_irq_nrs[2]];
    pci_irqs[3] = mpic[pci_irq_nrs[3]];
    pci_bus = ppce500_pci_init(pci_irqs, MPC8544_PCI_REGS_BASE);
    if (!pci_bus)
        printf("couldn't create PCI controller!\n");

    isa_mmio_init(MPC8544_PCI_IO, MPC8544_PCI_IOLEN, 1);

    if (pci_bus) {
        /* Register network interfaces. */
        for (i = 0; i < nb_nics; i++) {
            pci_nic_init_nofail(&nd_table[i], "virtio", NULL);
        }
    }

    /* Load kernel. */
    if (kernel_filename) {
        kernel_size = load_uimage(kernel_filename, &entry, &loadaddr, NULL);
        if (kernel_size < 0) {
            kernel_size = load_elf(kernel_filename, NULL, NULL, &elf_entry,
                                   &elf_lowaddr, NULL, 1, ELF_MACHINE, 0);
            entry = elf_entry;
            loadaddr = elf_lowaddr;
        }
        /* XXX try again as binary */
        if (kernel_size < 0) {
            fprintf(stderr, "qemu: could not load kernel '%s'\n",
                    kernel_filename);
            exit(1);
        }
    }

    /* Load initrd. */
    if (initrd_filename) {
        initrd_base = (kernel_size + INITRD_LOAD_PAD) & ~INITRD_PAD_MASK;
        initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                          ram_size - initrd_base);

        if (initrd_size < 0) {
            fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
                    initrd_filename);
            exit(1);
        }
    }

    /* If we're loading a kernel directly, we must load the device tree too. */
    if (kernel_filename) {
        dt_base = (kernel_size + DTC_LOAD_PAD) & ~DTC_PAD_MASK;
        if (mpc8544_load_device_tree(dt_base, ram_size,
                    initrd_base, initrd_size, kernel_cmdline) < 0) {
            fprintf(stderr, "couldn't load device tree\n");
            exit(1);
        }

        cpu_synchronize_state(env);

        /* Set initial guest state. */
        env->gpr[1] = (16<<20) - 8;
        env->gpr[3] = dt_base;
        env->nip = entry;
        /* XXX we currently depend on KVM to create some initial TLB entries. */
    }

    if (kvm_enabled())
        kvmppc_init();

    return;
}
Ejemplo n.º 24
0
static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)
{
    MSF2State *s = MSF2_SOC(dev_soc);
    DeviceState *dev, *armv7m;
    SysBusDevice *busdev;
    Error *err = NULL;
    int i;

    MemoryRegion *system_memory = get_system_memory();
    MemoryRegion *nvm = g_new(MemoryRegion, 1);
    MemoryRegion *nvm_alias = g_new(MemoryRegion, 1);
    MemoryRegion *sram = g_new(MemoryRegion, 1);

    memory_region_init_rom(nvm, NULL, "MSF2.eNVM", s->envm_size,
                           &error_fatal);
    /*
     * On power-on, the eNVM region 0x60000000 is automatically
     * remapped to the Cortex-M3 processor executable region
     * start address (0x0). We do not support remapping other eNVM,
     * eSRAM and DDR regions by guest(via Sysreg) currently.
     */
    memory_region_init_alias(nvm_alias, NULL, "MSF2.eNVM",
                             nvm, 0, s->envm_size);

    memory_region_add_subregion(system_memory, ENVM_BASE_ADDRESS, nvm);
    memory_region_add_subregion(system_memory, 0, nvm_alias);

    memory_region_init_ram(sram, NULL, "MSF2.eSRAM", s->esram_size,
                           &error_fatal);
    memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram);

    armv7m = DEVICE(&s->armv7m);
    qdev_prop_set_uint32(armv7m, "num-irq", 81);
    qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type);
    qdev_prop_set_bit(armv7m, "enable-bitband", true);
    object_property_set_link(OBJECT(&s->armv7m), OBJECT(get_system_memory()),
                                     "memory", &error_abort);
    object_property_set_bool(OBJECT(&s->armv7m), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }

    if (!s->m3clk) {
        error_setg(errp, "Invalid m3clk value");
        error_append_hint(errp, "m3clk can not be zero\n");
        return;
    }

    qdev_connect_gpio_out_named(DEVICE(&s->armv7m.nvic), "SYSRESETREQ", 0,
                                qemu_allocate_irq(&do_sys_reset, NULL, 0));

    system_clock_scale = NANOSECONDS_PER_SECOND / s->m3clk;

    for (i = 0; i < MSF2_NUM_UARTS; i++) {
        if (serial_hd(i)) {
            serial_mm_init(get_system_memory(), uart_addr[i], 2,
                           qdev_get_gpio_in(armv7m, uart_irq[i]),
                           115200, serial_hd(i), DEVICE_NATIVE_ENDIAN);
        }
    }

    dev = DEVICE(&s->timer);
    /* APB0 clock is the timer input clock */
    qdev_prop_set_uint32(dev, "clock-frequency", s->m3clk / s->apb0div);
    object_property_set_bool(OBJECT(&s->timer), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }
    busdev = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(busdev, 0, MSF2_TIMER_BASE);
    sysbus_connect_irq(busdev, 0,
                           qdev_get_gpio_in(armv7m, timer_irq[0]));
    sysbus_connect_irq(busdev, 1,
                           qdev_get_gpio_in(armv7m, timer_irq[1]));

    dev = DEVICE(&s->sysreg);
    qdev_prop_set_uint32(dev, "apb0divisor", s->apb0div);
    qdev_prop_set_uint32(dev, "apb1divisor", s->apb1div);
    object_property_set_bool(OBJECT(&s->sysreg), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }
    busdev = SYS_BUS_DEVICE(dev);
    sysbus_mmio_map(busdev, 0, MSF2_SYSREG_BASE);

    for (i = 0; i < MSF2_NUM_SPIS; i++) {
        gchar *bus_name;

        object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err);
        if (err != NULL) {
            error_propagate(errp, err);
            return;
        }

        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]);
        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
                           qdev_get_gpio_in(armv7m, spi_irq[i]));

        /* Alias controller SPI bus to the SoC itself */
        bus_name = g_strdup_printf("spi%d", i);
        object_property_add_alias(OBJECT(s), bus_name,
                                  OBJECT(&s->spi[i]), "spi",
                                  &error_abort);
        g_free(bus_name);
    }

    /* Below devices are not modelled yet. */
    create_unimplemented_device("i2c_0", 0x40002000, 0x1000);
    create_unimplemented_device("dma", 0x40003000, 0x1000);
    create_unimplemented_device("watchdog", 0x40005000, 0x1000);
    create_unimplemented_device("i2c_1", 0x40012000, 0x1000);
    create_unimplemented_device("gpio", 0x40013000, 0x1000);
    create_unimplemented_device("hs-dma", 0x40014000, 0x1000);
    create_unimplemented_device("can", 0x40015000, 0x1000);
    create_unimplemented_device("rtc", 0x40017000, 0x1000);
    create_unimplemented_device("apb_config", 0x40020000, 0x10000);
    create_unimplemented_device("emac", 0x40041000, 0x1000);
    create_unimplemented_device("usb", 0x40043000, 0x1000);
}
Ejemplo n.º 25
0
static void
petalogix_ml605_init(MachineState *machine)
{
    ram_addr_t ram_size = machine->ram_size;
    MemoryRegion *address_space_mem = get_system_memory();
    DeviceState *dev, *dma, *eth0;
    Object *ds, *cs;
    MicroBlazeCPU *cpu;
    SysBusDevice *busdev;
    DriveInfo *dinfo;
    int i;
    MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
    MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
    qemu_irq irq[32];

    /* init CPUs */
    cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
    object_property_set_str(OBJECT(cpu), "8.10.a", "version", &error_abort);
    /* Use FPU but don't use floating point conversion and square
     * root instructions
     */
    object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
    object_property_set_bool(OBJECT(cpu), true, "dcache-writeback",
                             &error_abort);
    object_property_set_bool(OBJECT(cpu), true, "endianness", &error_abort);
    object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);

    /* Attach emulated BRAM through the LMB.  */
    memory_region_init_ram(phys_lmb_bram, NULL, "petalogix_ml605.lmb_bram",
                           LMB_BRAM_SIZE, &error_fatal);
    vmstate_register_ram_global(phys_lmb_bram);
    memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram);

    memory_region_init_ram(phys_ram, NULL, "petalogix_ml605.ram", ram_size,
                           &error_fatal);
    vmstate_register_ram_global(phys_ram);
    memory_region_add_subregion(address_space_mem, MEMORY_BASEADDR, phys_ram);

    dinfo = drive_get(IF_PFLASH, 0, 0);
    /* 5th parameter 2 means bank-width
     * 10th paremeter 0 means little-endian */
    pflash_cfi01_register(FLASH_BASEADDR,
                          NULL, "petalogix_ml605.flash", FLASH_SIZE,
                          dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
                          (64 * 1024), FLASH_SIZE >> 16,
                          2, 0x89, 0x18, 0x0000, 0x0, 0);


    dev = qdev_create(NULL, "xlnx.xps-intc");
    qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
                       qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
    for (i = 0; i < 32; i++) {
        irq[i] = qdev_get_gpio_in(dev, i);
    }

    serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2,
                   irq[UART16550_IRQ], 115200, serial_hds[0],
                   DEVICE_LITTLE_ENDIAN);

    /* 2 timers at irq 2 @ 100 Mhz.  */
    dev = qdev_create(NULL, "xlnx.xps-timer");
    qdev_prop_set_uint32(dev, "one-timer-only", 0);
    qdev_prop_set_uint32(dev, "clock-frequency", 100 * 1000000);
    qdev_init_nofail(dev);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);

    /* axi ethernet and dma initialization. */
    qemu_check_nic_model(&nd_table[0], "xlnx.axi-ethernet");
    eth0 = qdev_create(NULL, "xlnx.axi-ethernet");
    dma = qdev_create(NULL, "xlnx.axi-dma");

    /* FIXME: attach to the sysbus instead */
    object_property_add_child(qdev_get_machine(), "xilinx-eth", OBJECT(eth0),
                              NULL);
    object_property_add_child(qdev_get_machine(), "xilinx-dma", OBJECT(dma),
                              NULL);

    ds = object_property_get_link(OBJECT(dma),
                                  "axistream-connected-target", NULL);
    cs = object_property_get_link(OBJECT(dma),
                                  "axistream-control-connected-target", NULL);
    qdev_set_nic_properties(eth0, &nd_table[0]);
    qdev_prop_set_uint32(eth0, "rxmem", 0x1000);
    qdev_prop_set_uint32(eth0, "txmem", 0x1000);
    object_property_set_link(OBJECT(eth0), OBJECT(ds),
                             "axistream-connected", &error_abort);
    object_property_set_link(OBJECT(eth0), OBJECT(cs),
                             "axistream-control-connected", &error_abort);
    qdev_init_nofail(eth0);
    sysbus_mmio_map(SYS_BUS_DEVICE(eth0), 0, AXIENET_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(eth0), 0, irq[AXIENET_IRQ]);

    ds = object_property_get_link(OBJECT(eth0),
                                  "axistream-connected-target", NULL);
    cs = object_property_get_link(OBJECT(eth0),
                                  "axistream-control-connected-target", NULL);
    qdev_prop_set_uint32(dma, "freqhz", 100 * 1000000);
    object_property_set_link(OBJECT(dma), OBJECT(ds),
                             "axistream-connected", &error_abort);
    object_property_set_link(OBJECT(dma), OBJECT(cs),
                             "axistream-control-connected", &error_abort);
    qdev_init_nofail(dma);
    sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, AXIDMA_BASEADDR);
    sysbus_connect_irq(SYS_BUS_DEVICE(dma), 0, irq[AXIDMA_IRQ0]);
    sysbus_connect_irq(SYS_BUS_DEVICE(dma), 1, irq[AXIDMA_IRQ1]);

    {
        SSIBus *spi;

        dev = qdev_create(NULL, "xlnx.xps-spi");
        qdev_prop_set_uint8(dev, "num-ss-bits", NUM_SPI_FLASHES);
        qdev_init_nofail(dev);
        busdev = SYS_BUS_DEVICE(dev);
        sysbus_mmio_map(busdev, 0, SPI_BASEADDR);
        sysbus_connect_irq(busdev, 0, irq[SPI_IRQ]);

        spi = (SSIBus *)qdev_get_child_bus(dev, "spi");

        for (i = 0; i < NUM_SPI_FLASHES; i++) {
            qemu_irq cs_line;

            dev = ssi_create_slave(spi, "n25q128");
            cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
            sysbus_connect_irq(busdev, i+1, cs_line);
        }
    }

    /* setup PVR to match kernel settings */
    cpu->env.pvr.regs[4] = 0xc56b8000;
    cpu->env.pvr.regs[5] = 0xc56be000;
    cpu->env.pvr.regs[10] = 0x0e000000; /* virtex 6 */

    microblaze_load_kernel(cpu, MEMORY_BASEADDR, ram_size,
                           machine->initrd_filename,
                           BINARY_DEVICE_TREE_FILE,
                           NULL);

}
Ejemplo n.º 26
0
/* EBUS (Eight bit bus) bridge */
static void ebus_realize(PCIDevice *pci_dev, Error **errp)
{
    EbusState *s = EBUS(pci_dev);
    SysBusDevice *sbd;
    DeviceState *dev;
    qemu_irq *isa_irq;
    DriveInfo *fd[MAX_FD];
    int i;

    s->isa_bus = isa_bus_new(DEVICE(pci_dev), get_system_memory(),
                             pci_address_space_io(pci_dev), errp);
    if (!s->isa_bus) {
        error_setg(errp, "unable to instantiate EBUS ISA bus");
        return;
    }

    /* ISA bus */
    isa_irq = qemu_allocate_irqs(ebus_isa_irq_handler, s, ISA_NUM_IRQS);
    isa_bus_irqs(s->isa_bus, isa_irq);
    qdev_init_gpio_out_named(DEVICE(s), s->isa_bus_irqs, "isa-irq",
                             ISA_NUM_IRQS);

    /* Serial ports */
    i = 0;
    if (s->console_serial_base) {
        serial_mm_init(pci_address_space(pci_dev), s->console_serial_base,
                       0, NULL, 115200, serial_hds[i], DEVICE_BIG_ENDIAN);
        i++;
    }
    serial_hds_isa_init(s->isa_bus, i, MAX_SERIAL_PORTS);

    /* Parallel ports */
    parallel_hds_isa_init(s->isa_bus, MAX_PARALLEL_PORTS);

    /* Keyboard */
    isa_create_simple(s->isa_bus, "i8042");

    /* Floppy */
    for (i = 0; i < MAX_FD; i++) {
        fd[i] = drive_get(IF_FLOPPY, 0, i);
    }
    dev = DEVICE(isa_create(s->isa_bus, TYPE_ISA_FDC));
    if (fd[0]) {
        qdev_prop_set_drive(dev, "driveA", blk_by_legacy_dinfo(fd[0]),
                            &error_abort);
    }
    if (fd[1]) {
        qdev_prop_set_drive(dev, "driveB", blk_by_legacy_dinfo(fd[1]),
                            &error_abort);
    }
    qdev_prop_set_uint32(dev, "dma", -1);
    qdev_init_nofail(dev);

    /* Power */
    dev = qdev_create(NULL, TYPE_SUN4U_POWER);
    qdev_init_nofail(dev);
    sbd = SYS_BUS_DEVICE(dev);
    memory_region_add_subregion(pci_address_space_io(pci_dev), 0x7240,
                                sysbus_mmio_get_region(sbd, 0));

    /* PCI */
    pci_dev->config[0x04] = 0x06; // command = bus master, pci mem
    pci_dev->config[0x05] = 0x00;
    pci_dev->config[0x06] = 0xa0; // status = fast back-to-back, 66MHz, no error
    pci_dev->config[0x07] = 0x03; // status = medium devsel
    pci_dev->config[0x09] = 0x00; // programming i/f
    pci_dev->config[0x0D] = 0x0a; // latency_timer

    memory_region_init_alias(&s->bar0, OBJECT(s), "bar0", get_system_io(),
                             0, 0x1000000);
    pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->bar0);
    memory_region_init_alias(&s->bar1, OBJECT(s), "bar1", get_system_io(),
                             0, 0x8000);
    pci_register_bar(pci_dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &s->bar1);
}
Ejemplo n.º 27
0
static void aw_a10_realize(DeviceState *dev, Error **errp)
{
    AwA10State *s = AW_A10(dev);
    SysBusDevice *sysbusdev;
    uint8_t i;
    qemu_irq fiq, irq;
    Error *err = NULL;

    object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }
    irq = qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ);
    fiq = qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ);

    object_property_set_bool(OBJECT(&s->intc), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }
    sysbusdev = SYS_BUS_DEVICE(&s->intc);
    sysbus_mmio_map(sysbusdev, 0, AW_A10_PIC_REG_BASE);
    sysbus_connect_irq(sysbusdev, 0, irq);
    sysbus_connect_irq(sysbusdev, 1, fiq);
    for (i = 0; i < AW_A10_PIC_INT_NR; i++) {
        s->irq[i] = qdev_get_gpio_in(DEVICE(&s->intc), i);
    }

    object_property_set_bool(OBJECT(&s->timer), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }
    sysbusdev = SYS_BUS_DEVICE(&s->timer);
    sysbus_mmio_map(sysbusdev, 0, AW_A10_PIT_REG_BASE);
    sysbus_connect_irq(sysbusdev, 0, s->irq[22]);
    sysbus_connect_irq(sysbusdev, 1, s->irq[23]);
    sysbus_connect_irq(sysbusdev, 2, s->irq[24]);
    sysbus_connect_irq(sysbusdev, 3, s->irq[25]);
    sysbus_connect_irq(sysbusdev, 4, s->irq[67]);
    sysbus_connect_irq(sysbusdev, 5, s->irq[68]);

    memory_region_init_ram(&s->sram_a, OBJECT(dev), "sram A", 48 * KiB,
                           &error_fatal);
    memory_region_add_subregion(get_system_memory(), 0x00000000, &s->sram_a);
    create_unimplemented_device("a10-sram-ctrl", 0x01c00000, 4 * KiB);

    /* FIXME use qdev NIC properties instead of nd_table[] */
    if (nd_table[0].used) {
        qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC);
        qdev_set_nic_properties(DEVICE(&s->emac), &nd_table[0]);
    }
    object_property_set_bool(OBJECT(&s->emac), true, "realized", &err);
    if (err != NULL) {
        error_propagate(errp, err);
        return;
    }
    sysbusdev = SYS_BUS_DEVICE(&s->emac);
    sysbus_mmio_map(sysbusdev, 0, AW_A10_EMAC_BASE);
    sysbus_connect_irq(sysbusdev, 0, s->irq[55]);

    object_property_set_bool(OBJECT(&s->sata), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->sata), 0, AW_A10_SATA_BASE);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->sata), 0, s->irq[56]);

    /* FIXME use a qdev chardev prop instead of serial_hd() */
    serial_mm_init(get_system_memory(), AW_A10_UART0_REG_BASE, 2, s->irq[1],
                   115200, serial_hd(0), DEVICE_NATIVE_ENDIAN);
}
Ejemplo n.º 28
0
static void aspeed_soc_realize(DeviceState *dev, Error **errp)
{
    int i;
    AspeedSoCState *s = ASPEED_SOC(dev);
    AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
    Error *err = NULL, *local_err = NULL;

    /* IO space */
    create_unimplemented_device("aspeed_soc.io",
                                ASPEED_SOC_IOMEM_BASE, ASPEED_SOC_IOMEM_SIZE);

    /* CPU */
    object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }

    /* SRAM */
    memory_region_init_ram(&s->sram, OBJECT(dev), "aspeed.sram",
                           sc->info->sram_size, &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    memory_region_add_subregion(get_system_memory(), ASPEED_SOC_SRAM_BASE,
                                &s->sram);

    /* SCU */
    object_property_set_bool(OBJECT(&s->scu), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, ASPEED_SOC_SCU_BASE);

    /* VIC */
    object_property_set_bool(OBJECT(&s->vic), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, ASPEED_SOC_VIC_BASE);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 0,
                       qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ));
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1,
                       qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ));

    /* Timer */
    object_property_set_bool(OBJECT(&s->timerctrl), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, ASPEED_SOC_TIMER_BASE);
    for (i = 0; i < ARRAY_SIZE(timer_irqs); i++) {
        qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->vic), timer_irqs[i]);
        sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
    }

    /* UART - attach an 8250 to the IO space as our UART5 */
    if (serial_hd(0)) {
        qemu_irq uart5 = qdev_get_gpio_in(DEVICE(&s->vic), uart_irqs[4]);
        serial_mm_init(get_system_memory(),
                       ASPEED_SOC_IOMEM_BASE + ASPEED_SOC_UART_5_BASE, 2,
                       uart5, 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN);
    }

    /* I2C */
    object_property_set_bool(OBJECT(&s->i2c), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, ASPEED_SOC_I2C_BASE);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0,
                       qdev_get_gpio_in(DEVICE(&s->vic), 12));

    /* FMC, The number of CS is set at the board level */
    object_property_set_bool(OBJECT(&s->fmc), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, ASPEED_SOC_FMC_BASE);
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1,
                    s->fmc.ctrl->flash_window_base);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0,
                       qdev_get_gpio_in(DEVICE(&s->vic), 19));

    /* SPI */
    for (i = 0; i < sc->info->spis_num; i++) {
        object_property_set_int(OBJECT(&s->spi[i]), 1, "num-cs", &err);
        object_property_set_bool(OBJECT(&s->spi[i]), true, "realized",
                                 &local_err);
        error_propagate(&err, local_err);
        if (err) {
            error_propagate(errp, err);
            return;
        }
        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, sc->info->spi_bases[i]);
        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 1,
                        s->spi[i].ctrl->flash_window_base);
    }

    /* SDMC - SDRAM Memory Controller */
    object_property_set_bool(OBJECT(&s->sdmc), true, "realized", &err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, ASPEED_SOC_SDMC_BASE);

    /* Watch dog */
    for (i = 0; i < sc->info->wdts_num; i++) {
        object_property_set_bool(OBJECT(&s->wdt[i]), true, "realized", &err);
        if (err) {
            error_propagate(errp, err);
            return;
        }
        sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0,
                        ASPEED_SOC_WDT_BASE + i * 0x20);
    }

    /* Net */
    qdev_set_nic_properties(DEVICE(&s->ftgmac100), &nd_table[0]);
    object_property_set_bool(OBJECT(&s->ftgmac100), true, "aspeed", &err);
    object_property_set_bool(OBJECT(&s->ftgmac100), true, "realized",
                             &local_err);
    error_propagate(&err, local_err);
    if (err) {
        error_propagate(errp, err);
        return;
    }
    sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, ASPEED_SOC_ETH1_BASE);
    sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0,
                       qdev_get_gpio_in(DEVICE(&s->vic), 2));
}
Ejemplo n.º 29
0
static void sun4uv_init(MemoryRegion *address_space_mem,
                        ram_addr_t RAM_size,
                        const char *boot_devices,
                        const char *kernel_filename, const char *kernel_cmdline,
                        const char *initrd_filename, const char *cpu_model,
                        const struct hwdef *hwdef)
{
    SPARCCPU *cpu;
    M48t59State *nvram;
    unsigned int i;
    uint64_t initrd_addr, initrd_size, kernel_addr, kernel_size, kernel_entry;
    PCIBus *pci_bus, *pci_bus2, *pci_bus3;
    ISABus *isa_bus;
    qemu_irq *ivec_irqs, *pbm_irqs;
    DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
    DriveInfo *fd[MAX_FD];
    void *fw_cfg;

    /* init CPUs */
    cpu = cpu_devinit(cpu_model, hwdef);

    /* set up devices */
    ram_init(0, RAM_size);

    prom_init(hwdef->prom_addr, bios_name);

    ivec_irqs = qemu_allocate_irqs(cpu_set_ivec_irq, cpu, IVEC_MAX);
    pci_bus = pci_apb_init(APB_SPECIAL_BASE, APB_MEM_BASE, ivec_irqs, &pci_bus2,
                           &pci_bus3, &pbm_irqs);
    pci_vga_init(pci_bus);

    // XXX Should be pci_bus3
    isa_bus = pci_ebus_init(pci_bus, -1, pbm_irqs);

    i = 0;
    if (hwdef->console_serial_base) {
        serial_mm_init(address_space_mem, hwdef->console_serial_base, 0,
                       NULL, 115200, serial_hds[i], DEVICE_BIG_ENDIAN);
        i++;
    }
    for(; i < MAX_SERIAL_PORTS; i++) {
        if (serial_hds[i]) {
            serial_isa_init(isa_bus, i, serial_hds[i]);
        }
    }

    for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
        if (parallel_hds[i]) {
            parallel_init(isa_bus, i, parallel_hds[i]);
        }
    }

    for(i = 0; i < nb_nics; i++)
        pci_nic_init_nofail(&nd_table[i], "ne2k_pci", NULL);

    ide_drive_get(hd, MAX_IDE_BUS);

    pci_cmd646_ide_init(pci_bus, hd, 1);

    isa_create_simple(isa_bus, "i8042");
    for(i = 0; i < MAX_FD; i++) {
        fd[i] = drive_get(IF_FLOPPY, 0, i);
    }
    fdctrl_init_isa(isa_bus, fd);
    nvram = m48t59_init_isa(isa_bus, 0x0074, NVRAM_SIZE, 59);

    initrd_size = 0;
    initrd_addr = 0;
    kernel_size = sun4u_load_kernel(kernel_filename, initrd_filename,
                                    ram_size, &initrd_size, &initrd_addr,
                                    &kernel_addr, &kernel_entry);

    sun4u_NVRAM_set_params(nvram, NVRAM_SIZE, "Sun4u", RAM_size, boot_devices,
                           kernel_addr, kernel_size,
                           kernel_cmdline,
                           initrd_addr, initrd_size,
                           /* XXX: need an option to load a NVRAM image */
                           0,
                           graphic_width, graphic_height, graphic_depth,
                           (uint8_t *)&nd_table[0].macaddr);

    fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
    fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
    fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
    fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, hwdef->machine_id);
    fw_cfg_add_i64(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_entry);
    fw_cfg_add_i64(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
    if (kernel_cmdline) {
        fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
                       strlen(kernel_cmdline) + 1);
        fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, kernel_cmdline);
    } else {
        fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, 0);
    }
    fw_cfg_add_i64(fw_cfg, FW_CFG_INITRD_ADDR, initrd_addr);
    fw_cfg_add_i64(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
    fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, boot_devices[0]);

    fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_WIDTH, graphic_width);
    fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_HEIGHT, graphic_height);
    fw_cfg_add_i16(fw_cfg, FW_CFG_SPARC64_DEPTH, graphic_depth);

    qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
Ejemplo n.º 30
0
static
void mips_pica61_init (int ram_size, int vga_ram_size, int boot_device,
                    DisplayState *ds, const char **fd_filename, int snapshot,
                    const char *kernel_filename, const char *kernel_cmdline,
                    const char *initrd_filename, const char *cpu_model)
{
    char buf[1024];
    unsigned long bios_offset;
    int bios_size;
    CPUState *env;
    int i;
    mips_def_t *def;
    int available_ram;
    qemu_irq *i8259;

    /* init CPUs */
    if (cpu_model == NULL) {
#ifdef TARGET_MIPS64
        cpu_model = "R4000";
#else
        /* FIXME: All wrong, this maybe should be R3000 for the older PICAs. */
        cpu_model = "24Kf";
#endif
    }
    if (mips_find_by_name(cpu_model, &def) != 0)
        def = NULL;
    env = cpu_init();
    cpu_mips_register(env, def);
    register_savevm("cpu", 0, 3, cpu_save, cpu_load, env);
    qemu_register_reset(main_cpu_reset, env);

    /* allocate RAM (limited to 256 MB) */
    if (ram_size < 256 * 1024 * 1024)
        available_ram = ram_size;
    else
        available_ram = 256 * 1024 * 1024;
    cpu_register_physical_memory(0, available_ram, IO_MEM_RAM);

    /* load a BIOS image */
    bios_offset = ram_size + vga_ram_size;
    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME);
    bios_size = load_image(buf, phys_ram_base + bios_offset);
    if ((bios_size <= 0) || (bios_size > BIOS_SIZE)) {
        /* fatal */
        fprintf(stderr, "qemu: Error, could not load MIPS bios '%s'\n",
                buf);
        exit(1);
    }
    cpu_register_physical_memory(0x1fc00000,
                                     BIOS_SIZE, bios_offset | IO_MEM_ROM);

    /* Device map
     *
     * addr 0xe0004000: mc146818
     * addr 0xe0005000 intr 6: ps2 keyboard
     * addr 0xe0005000 intr 7: ps2 mouse
     * addr 0xe0006000 intr 8: ns16550a,
     * addr 0xe0007000 intr 9: ns16550a
     * isa_io_base 0xe2000000 isa_mem_base 0xe3000000
     */

    /* Init CPU internal devices */
    cpu_mips_irq_init_cpu(env);
    cpu_mips_clock_init(env);
    cpu_mips_irqctrl_init();

    /* Register 64 KB of ISA IO space at 0x10000000 */
    isa_mmio_init(0x10000000, 0x00010000);
    isa_mem_base = 0x11000000;

    /* PC style IRQ (i8259/i8254) and DMA (i8257) */
    /* The PIC is attached to the MIPS CPU INT0 pin */
    i8259 = i8259_init(env->irq[2]);
    rtc_mm_init(0x80004070, 1, i8259[14]);
    pit_init(0x40, 0);

    /* Keyboard (i8042) */
    i8042_mm_init(i8259[6], i8259[7], 0x80005060, 0);

    /* IDE controller */
    for(i = 0; i < 2; i++)
        isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
                     bs_table[2 * i], bs_table[2 * i + 1]);

    /* Network controller */
    /* FIXME: missing NS SONIC DP83932 */

    /* SCSI adapter */
    /* FIXME: missing NCR 53C94 */

    /* ISA devices (floppy, serial, parallel) */
    fdctrl_init(i8259[1], 1, 1, 0x80003000, fd_table);
    for(i = 0; i < MAX_SERIAL_PORTS; i++) {
        if (serial_hds[i]) {
            serial_mm_init(serial_base[i], 0, i8259[serial_irq[i]], serial_hds[i], 1);
        }
    }
    /* Parallel port */
    if (parallel_hds[0]) parallel_mm_init(0x80008000, 0, i8259[1], parallel_hds[0]);

    /* Sound card */
    /* FIXME: missing Jazz sound, IRQ 18 */

    /* LED indicator */
    /* FIXME: missing LED indicator */

    /* NVRAM */
    ds1225y_init(0x80009000, "nvram");

    /* Video card */
    /* FIXME: This card is not the real one which was in the original PICA,
     * but let's do with what Qemu currenly emulates... */
    isa_vga_mm_init(ds, phys_ram_base + ram_size, ram_size, vga_ram_size,
                    0x40000000, 0x60000000, 0);
}