int main(int argc, char **argv)
{
Aria::init();
ArServerBase robotServer;
if (!robotServer.open(5000))
{
printf("Could not open robot server port\n");
Aria::exit(1);
}
ArServerBase clientServer;
if (!clientServer.open(7272))
{
printf("Could not open robot server port\n");
Aria::exit(1);
}
ArCentralManager switchManager(&robotServer, &clientServer);
switchManager.addForwarderAddedCallback(
new ArGlobalFunctor1<ArCentralForwarder *>(&forwarderAdded),
100);
switchManager.addForwarderRemovedCallback(
new ArGlobalFunctor1<ArCentralForwarder *>(&forwarderRemoved),
100);
// Start a small handler to monitor communication between the server and
// client.
ArServerHandlerCommMonitor commMonitor(&clientServer);
ArServerHandlerCommands commands(&clientServer);
commands.setPrefix("CentralServer");
ArServerSimpleServerCommands serverCommands(&commands, &clientServer,
false);
commands.addCommand(
"NetworkLogConnections", "Logs the connections to the central server, and to all the forwarded connections",
new ArFunctorC<ArCentralManager>
(&switchManager, &ArCentralManager::logConnections));
clientServer.runAsync();
robotServer.run();
Aria::exit(0);
}
int main(int argc, char **argv)
{
// mandatory init
Aria::init();
//ArLog::init(ArLog::StdOut, ArLog::Verbose);
// set up our parser
ArArgumentParser parser(&argc, argv);
// load the default arguments
parser.loadDefaultArguments();
// robot
ArRobot robot;
// set up our simple connector
ArRobotConnector robotConnector(&parser, &robot);
// add a gyro, it'll see if it should attach to the robot or not
ArAnalogGyro gyro(&robot);
// set up the robot for connecting
if (!robotConnector.connectRobot())
{
printf("Could not connect to robot... exiting\n");
Aria::exit(1);
}
ArDataLogger dataLogger(&robot, "dataLog.txt");
dataLogger.addToConfig(Aria::getConfig());
// our base server object
ArServerBase server;
ArLaserConnector laserConnector(&parser, &robot, &robotConnector);
ArServerSimpleOpener simpleOpener(&parser);
ArClientSwitchManager clientSwitchManager(&server, &parser);
// parse the command line... fail and print the help if the parsing fails
// or if the help was requested
if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
{
Aria::logOptions();
Aria::exit(1);
}
// Set up where we'll look for files such as user/password
char fileDir[1024];
ArUtil::addDirectories(fileDir, sizeof(fileDir), Aria::getDirectory(),
"ArNetworking/examples");
// first open the server up
if (!simpleOpener.open(&server, fileDir, 240))
{
if (simpleOpener.wasUserFileBad())
printf("Bad user/password/permissions file\n");
else
printf("Could not open server port\n");
exit(1);
}
// Range devices:
ArSonarDevice sonarDev;
robot.addRangeDevice(&sonarDev);
ArIRs irs;
robot.addRangeDevice(&irs);
ArBumpers bumpers;
robot.addRangeDevice(&bumpers);
// attach services to the server
ArServerInfoRobot serverInfoRobot(&server, &robot);
ArServerInfoSensor serverInfoSensor(&server, &robot);
ArServerInfoDrawings drawings(&server);
// modes for controlling robot movement
ArServerModeStop modeStop(&server, &robot);
ArServerModeRatioDrive modeRatioDrive(&server, &robot);
ArServerModeWander modeWander(&server, &robot);
modeStop.addAsDefaultMode();
modeStop.activate();
// set up the simple commands
ArServerHandlerCommands commands(&server);
ArServerSimpleComUC uCCommands(&commands, &robot); // send commands directly to microcontroller
ArServerSimpleComMovementLogging loggingCommands(&commands, &robot); // control debug logging
ArServerSimpleComGyro gyroCommands(&commands, &robot, &gyro); // configure gyro
ArServerSimpleComLogRobotConfig configCommands(&commands, &robot); // control more debug logging
ArServerSimpleServerCommands serverCommands(&commands, &server); // control ArNetworking debug logging
ArServerSimpleLogRobotDebugPackets logRobotDebugPackets(&commands, &robot, "."); // debugging tool
// ArServerModeDrive is an older drive mode. ArServerModeRatioDrive is newer and generally performs better,
// but you can use this for old clients if neccesary.
//ArServerModeDrive modeDrive(&server, &robot);
//modeDrive.addControlCommands(&commands); // configure the drive modes (e.g. enable/disable safe drive)
ArServerHandlerConfig serverHandlerConfig(&server, Aria::getConfig()); // make a config handler
ArLog::addToConfig(Aria::getConfig()); // let people configure logging
modeRatioDrive.addToConfig(Aria::getConfig(), "Teleop settings"); // able to configure teleop settings
modeRatioDrive.addControlCommands(&commands);
// Forward video if either ACTS or SAV server are running.
// You can find out more about SAV and ACTS on our website
// http://robots.activmedia.com. ACTS is for color tracking and is
// a separate product. SAV just does software A/V transmitting and is
// free to all our customers. Just run ACTS or SAV server before you
// start this program and this class here will forward video from the
// server to the client.
ArHybridForwarderVideo videoForwarder(&server, "localhost", 7070);
// Control a pan/tilt/zoom camera, if one is installed, and the video
// forwarder was enabled above.
ArPTZ *camera = NULL;
ArServerHandlerCamera *handlerCamera = NULL;
ArCameraCollection *cameraCollection = NULL;
if (videoForwarder.isForwardingVideo())
{
bool invertedCamera = false;
camera = new ArVCC4(&robot, invertedCamera,
ArVCC4::COMM_UNKNOWN, true, true);
camera->init();
cameraCollection = new ArCameraCollection();
cameraCollection->addCamera("Cam1", "VCC4", "Camera", "VCC4");
handlerCamera = new ArServerHandlerCamera("Cam1",
&server,
&robot,
camera,
cameraCollection);
}
// You can use this class to send a set of arbitrary strings
// for MobileEyes to display, this is just a small example
ArServerInfoStrings stringInfo(&server);
Aria::getInfoGroup()->addAddStringCallback(stringInfo.getAddStringFunctor());
Aria::getInfoGroup()->addStringInt(
"Motor Packet Count", 10,
new ArConstRetFunctorC<int, ArRobot>(&robot,
&ArRobot::getMotorPacCount));
/*
Aria::getInfoGroup()->addStringInt(
"Laser Packet Count", 10,
new ArRetFunctorC<int, ArSick>(&sick,
&ArSick::getSickPacCount));
*/
// start the robot running, true means that if we lose connection the run thread stops
robot.runAsync(true);
// connect the laser(s) if it was requested
if (!laserConnector.connectLasers())
{
printf("Could not connect to lasers... exiting\n");
Aria::exit(2);
}
drawings.addRobotsRangeDevices(&robot);
// log whatever we wanted to before the runAsync
simpleOpener.checkAndLog();
// now let it spin off in its own thread
server.runAsync();
printf("Server is now running...\n");
// Add a key handler so that you can exit by pressing
// escape. Note that a key handler prevents you from running
// a program in the background on Linux, since it expects an
// active terminal to read keys from; remove this if you want
// to run it in the background.
ArKeyHandler *keyHandler;
if ((keyHandler = Aria::getKeyHandler()) == NULL)
{
keyHandler = new ArKeyHandler;
Aria::setKeyHandler(keyHandler);
robot.lock();
robot.attachKeyHandler(keyHandler);
robot.unlock();
printf("To exit, press escape.\n");
}
// Read in parameter files.
std::string configFile = "serverDemoConfig.txt";
Aria::getConfig()->setBaseDirectory("./");
if (Aria::getConfig()->parseFile(configFile.c_str(), true, true))
{
ArLog::log(ArLog::Normal, "Loaded config file %s", configFile.c_str());
}
else
{
if (ArUtil::findFile(configFile.c_str()))
{
ArLog::log(ArLog::Normal,
"Trouble loading configuration file %s, continuing",
configFile.c_str());
}
else
{
ArLog::log(ArLog::Normal,
"No configuration file %s, will try to create if config used",
configFile.c_str());
}
}
clientSwitchManager.runAsync();
robot.lock();
robot.enableMotors();
robot.unlock();
robot.waitForRunExit();
Aria::exit(0);
}
