void ContactBrowser::linkHighlighted(const QString& link)
{
if (mDocument) {
ContactDocument::ContactAnchorType cType = mDocument->getAnchorType(link);
/* Now display the new one */
switch(cType) {
case ContactDocument::None:
setEditFocus(true);
QSoftMenuBar::setLabel(this, Qt::Key_Select, QSoftMenuBar::NoLabel);
break;
case ContactDocument::DialLink:
setEditFocus(true);
QSoftMenuBar::setLabel(this, Qt::Key_Select, "phone/calls", tr("Dial"));
break;
case ContactDocument::EmailLink:
setEditFocus(true);
QSoftMenuBar::setLabel(this, Qt::Key_Select, "email", tr("Email"));
break;
case ContactDocument::QdlLink:
setEditFocus(true);
QSoftMenuBar::setLabel(this, Qt::Key_Select, QSoftMenuBar::Select);
break;
case ContactDocument::CustomLink:
setEditFocus(true);
QSoftMenuBar::setLabel(this, Qt::Key_Select, "activate", tr("Activate"));
break;
}
}
mLink = link;
}
/*!
\reimp
*/
void QSlider::mousePressEvent(QMouseEvent *ev)
{
Q_D(QSlider);
if (d->maximum == d->minimum || (ev->buttons() ^ ev->button())) {
ev->ignore();
return;
}
#ifdef QT_KEYPAD_NAVIGATION
if (QApplication::keypadNavigationEnabled())
setEditFocus(true);
#endif
ev->accept();
if ((ev->button() & style()->styleHint(QStyle::SH_Slider_AbsoluteSetButtons)) == ev->button()) {
QStyleOptionSlider opt;
initStyleOption(&opt);
const QRect sliderRect = style()->subControlRect(QStyle::CC_Slider, &opt, QStyle::SC_SliderHandle, this);
const QPoint center = sliderRect.center() - sliderRect.topLeft();
// to take half of the slider off for the setSliderPosition call we use the center - topLeft
setSliderPosition(d->pixelPosToRangeValue(d->pick(ev->pos() - center)));
triggerAction(SliderMove);
setRepeatAction(SliderNoAction);
d->pressedControl = QStyle::SC_SliderHandle;
update();
} else if ((ev->button() & style()->styleHint(QStyle::SH_Slider_PageSetButtons)) == ev->button()) {
QStyleOptionSlider opt;
initStyleOption(&opt);
d->pressedControl = style()->hitTestComplexControl(QStyle::CC_Slider,
&opt, ev->pos(), this);
SliderAction action = SliderNoAction;
if (d->pressedControl == QStyle::SC_SliderGroove) {
const QRect sliderRect = style()->subControlRect(QStyle::CC_Slider, &opt, QStyle::SC_SliderHandle, this);
int pressValue = d->pixelPosToRangeValue(d->pick(ev->pos() - sliderRect.center() + sliderRect.topLeft()));
d->pressValue = pressValue;
if (pressValue > d->value)
action = SliderPageStepAdd;
else if (pressValue < d->value)
action = SliderPageStepSub;
if (action) {
triggerAction(action);
setRepeatAction(action);
}
}
} else {
ev->ignore();
return;
}
if (d->pressedControl == QStyle::SC_SliderHandle) {
QStyleOptionSlider opt;
initStyleOption(&opt);
setRepeatAction(SliderNoAction);
QRect sr = style()->subControlRect(QStyle::CC_Slider, &opt, QStyle::SC_SliderHandle, this);
d->clickOffset = d->pick(ev->pos() - sr.topLeft());
update(sr);
setSliderDown(true);
}
}
/*!
\reimp
*/
void WheelBrowserScreen::showEvent(QShowEvent *e)
{
setEditFocus(true);
m_views.clear();
m_views.append("Main");
m_wheel->moveToWheel(*m_data);
m_fillTimeline->setDirection(QTimeLine::Forward);
m_fillTimeline->start();
QAbstractBrowserScreen::showEvent(e);
}
void QWrapListView::keyPressEvent(QKeyEvent *ke)
{
if (ke->key() == Qt::Key_Up && currentIndex().row() == 0) {
focusNextPrevChild(false);
ke->accept();
} else if (ke->key() == Qt::Key_Down && currentIndex().row() == model()->rowCount() - 1) {
focusNextPrevChild(true);
ke->accept();
} else if (ke->key() == Qt::Key_Back) {
setEditFocus(false);
QListView::keyPressEvent(ke);
} else
QListView::keyPressEvent(ke);
}
/*!
\reimp
*/
void QAbstractSlider::keyPressEvent(QKeyEvent *ev)
{
Q_D(QAbstractSlider);
SliderAction action = SliderNoAction;
#ifdef QT_KEYPAD_NAVIGATION
if (ev->isAutoRepeat()) {
if (!d->firstRepeat.isValid())
d->firstRepeat.start();
else if (1 == d->repeatMultiplier) {
// This is the interval in milli seconds which one key repetition
// takes.
const int repeatMSecs = d->firstRepeat.elapsed();
/**
* The time it takes to currently navigate the whole slider.
*/
const qreal currentTimeElapse = (qreal(maximum()) / singleStep()) * repeatMSecs;
/**
* This is an arbitrarily determined constant in msecs that
* specifies how long time it should take to navigate from the
* start to the end(excluding starting key auto repeat).
*/
const int SliderRepeatElapse = 2500;
d->repeatMultiplier = currentTimeElapse / SliderRepeatElapse;
}
}
else if (d->firstRepeat.isValid()) {
d->firstRepeat.invalidate();
d->repeatMultiplier = 1;
}
#endif
switch (ev->key()) {
#ifdef QT_KEYPAD_NAVIGATION
case Qt::Key_Select:
if (QApplication::keypadNavigationEnabled())
setEditFocus(!hasEditFocus());
else
ev->ignore();
break;
case Qt::Key_Back:
if (QApplication::keypadNavigationEnabled() && hasEditFocus()) {
setValue(d->origValue);
setEditFocus(false);
} else
ev->ignore();
break;
#endif
// It seems we need to use invertedAppearance for Left and right, otherwise, things look weird.
case Qt::Key_Left:
#ifdef QT_KEYPAD_NAVIGATION
// In QApplication::KeypadNavigationDirectional, we want to change the slider
// value if there is no left/right navigation possible and if this slider is not
// inside a tab widget.
if (QApplication::keypadNavigationEnabled()
&& (!hasEditFocus() && QApplication::navigationMode() == Qt::NavigationModeKeypadTabOrder
|| d->orientation == Qt::Vertical
|| !hasEditFocus()
&& (QWidgetPrivate::canKeypadNavigate(Qt::Horizontal) || QWidgetPrivate::inTabWidget(this)))) {
ev->ignore();
return;
}
if (QApplication::keypadNavigationEnabled() && d->orientation == Qt::Vertical)
action = d->invertedControls ? SliderSingleStepSub : SliderSingleStepAdd;
else
#endif
if (isRightToLeft())
action = d->invertedAppearance ? SliderSingleStepSub : SliderSingleStepAdd;
else
action = !d->invertedAppearance ? SliderSingleStepSub : SliderSingleStepAdd;
break;
case Qt::Key_Right:
#ifdef QT_KEYPAD_NAVIGATION
// Same logic as in Qt::Key_Left
if (QApplication::keypadNavigationEnabled()
&& (!hasEditFocus() && QApplication::navigationMode() == Qt::NavigationModeKeypadTabOrder
|| d->orientation == Qt::Vertical
|| !hasEditFocus()
&& (QWidgetPrivate::canKeypadNavigate(Qt::Horizontal) || QWidgetPrivate::inTabWidget(this)))) {
ev->ignore();
return;
}
if (QApplication::keypadNavigationEnabled() && d->orientation == Qt::Vertical)
action = d->invertedControls ? SliderSingleStepAdd : SliderSingleStepSub;
else
#endif
if (isRightToLeft())
action = d->invertedAppearance ? SliderSingleStepAdd : SliderSingleStepSub;
else
action = !d->invertedAppearance ? SliderSingleStepAdd : SliderSingleStepSub;
break;
case Qt::Key_Up:
#ifdef QT_KEYPAD_NAVIGATION
// In QApplication::KeypadNavigationDirectional, we want to change the slider
// value if there is no up/down navigation possible.
if (QApplication::keypadNavigationEnabled()
&& (QApplication::navigationMode() == Qt::NavigationModeKeypadTabOrder
|| d->orientation == Qt::Horizontal
|| !hasEditFocus() && QWidgetPrivate::canKeypadNavigate(Qt::Vertical))) {
ev->ignore();
break;
}
#endif
action = d->invertedControls ? SliderSingleStepSub : SliderSingleStepAdd;
break;
case Qt::Key_Down:
#ifdef QT_KEYPAD_NAVIGATION
// Same logic as in Qt::Key_Up
if (QApplication::keypadNavigationEnabled()
&& (QApplication::navigationMode() == Qt::NavigationModeKeypadTabOrder
|| d->orientation == Qt::Horizontal
|| !hasEditFocus() && QWidgetPrivate::canKeypadNavigate(Qt::Vertical))) {
ev->ignore();
break;
}
#endif
action = d->invertedControls ? SliderSingleStepAdd : SliderSingleStepSub;
break;
case Qt::Key_PageUp:
action = d->invertedControls ? SliderPageStepSub : SliderPageStepAdd;
break;
case Qt::Key_PageDown:
action = d->invertedControls ? SliderPageStepAdd : SliderPageStepSub;
break;
case Qt::Key_Home:
action = SliderToMinimum;
break;
case Qt::Key_End:
action = SliderToMaximum;
break;
default:
ev->ignore();
break;
}
if (action)
triggerAction(action);
}
/*!
\reimp
*/
void QAbstractSlider::keyPressEvent(QKeyEvent *ev)
{
Q_D(QAbstractSlider);
SliderAction action = SliderNoAction;
switch (ev->key()) {
#ifdef QT_KEYPAD_NAVIGATION
case Qt::Key_Select:
if (QApplication::keypadNavigationEnabled())
setEditFocus(!hasEditFocus());
else
ev->ignore();
break;
case Qt::Key_Back:
if (QApplication::keypadNavigationEnabled() && hasEditFocus()) {
setValue(d->origValue);
setEditFocus(false);
} else
ev->ignore();
break;
#endif
// It seems we need to use invertedAppearance for Left and right, otherwise, things look weird.
case Qt::Key_Left:
#ifdef QT_KEYPAD_NAVIGATION
if (QApplication::keypadNavigationEnabled() && !hasEditFocus()) {
ev->ignore();
return;
}
if (QApplication::keypadNavigationEnabled() && d->orientation == Qt::Vertical)
action = d->invertedControls ? SliderSingleStepSub : SliderSingleStepAdd;
else
#endif
if (isRightToLeft())
action = d->invertedAppearance ? SliderSingleStepSub : SliderSingleStepAdd;
else
action = !d->invertedAppearance ? SliderSingleStepSub : SliderSingleStepAdd;
break;
case Qt::Key_Right:
#ifdef QT_KEYPAD_NAVIGATION
if (QApplication::keypadNavigationEnabled() && !hasEditFocus()) {
ev->ignore();
return;
}
if (QApplication::keypadNavigationEnabled() && d->orientation == Qt::Vertical)
action = d->invertedControls ? SliderSingleStepAdd : SliderSingleStepSub;
else
#endif
if (isRightToLeft())
action = d->invertedAppearance ? SliderSingleStepAdd : SliderSingleStepSub;
else
action = !d->invertedAppearance ? SliderSingleStepAdd : SliderSingleStepSub;
break;
case Qt::Key_Up:
#ifdef QT_KEYPAD_NAVIGATION
if (QApplication::keypadNavigationEnabled()) {
ev->ignore();
break;
}
#endif
action = d->invertedControls ? SliderSingleStepSub : SliderSingleStepAdd;
break;
case Qt::Key_Down:
#ifdef QT_KEYPAD_NAVIGATION
if (QApplication::keypadNavigationEnabled()) {
ev->ignore();
break;
}
#endif
action = d->invertedControls ? SliderSingleStepAdd : SliderSingleStepSub;
break;
case Qt::Key_PageUp:
action = d->invertedControls ? SliderPageStepSub : SliderPageStepAdd;
break;
case Qt::Key_PageDown:
action = d->invertedControls ? SliderPageStepAdd : SliderPageStepSub;
break;
case Qt::Key_Home:
action = SliderToMinimum;
break;
case Qt::Key_End:
action = SliderToMaximum;
break;
default:
ev->ignore();
break;
}
if (action)
triggerAction(action);
}
