/** Binds the socket to the specified port. Call bind() for an unreliable socket if the host acts as a server and waits for
* messages. If the host acts as a client, call sendTo(), there is no need to bind the socket.
*/
void CUdpSock::bind( uint16 port )
{
CInetAddress addr; // any IP address
addr.setPort( port );
bind( addr );
setLocalAddress(); // will not set the address if the host is multihomed, use bind(CInetAddress) instead
}
FTPActiveTextDataOut::FTPActiveTextDataOut(QHostAddress aHostAdress, int aHostPort, QHostAddress aLocalAdress, int aLocalPort, QObject *parent)
:QTcpSocket(parent)
{
setLocalPort(aLocalPort);
setLocalAddress(aLocalAdress);
connect(this,SIGNAL(disconnected()),this,SLOT(connectionClosedSlot()));
connectToHost(aHostAdress,aHostPort,QIODevice::ReadWrite);
}
void PeerWireClient::socketStateChanged(QAbstractSocket::SocketState state)
{
setLocalAddress(socket.localAddress());
setLocalPort(socket.localPort());
setPeerName(socket.peerName());
setPeerAddress(socket.peerAddress());
setPeerPort(socket.peerPort());
setSocketState(state);
}
void CNetworkConnection::socketStateChanged(QAbstractSocket::SocketState state)
{
setLocalAddress(m_pSocket->localAddress());
setLocalPort(m_pSocket->localPort());
setPeerName(m_pSocket->peerName());
setPeerAddress(m_pSocket->peerAddress());
setPeerPort(m_pSocket->peerPort());
setSocketState(state);
}
MainWindow::MainWindow(QWidget *parent) :
QMainWindow(parent),
ui(new Ui::MainWindow),
logic(this),
connectDialog(new ZeroconfConnectDialog(this)),
ipConnectDialog(new IPConnectDialog(this))
{
ui->setupUi(this);
ui->centralwidget->setClientLogic(&logic);
/*
connect(connectDialog, SIGNAL(connectedTo(QHostAddress,quint16)),
this, SLOT(newServerConnection(QHostAddress,quint16)));
*/
connect(ipConnectDialog, SIGNAL(setLocalAddress(QHostAddress)),
&logic, SLOT(setLocalAddress(QHostAddress)));
connect(ipConnectDialog, SIGNAL(connectedTo(QHostAddress,quint16)),
this, SLOT(newServerConnection(QHostAddress,quint16)));
connect(ui->centralwidget, SIGNAL(take(QString)),
this, SLOT(takeNode(QString)));
connect(ui->centralwidget, SIGNAL(give(QString)),
this, SLOT(giveNode(QString)));
connect(&logic, SIGNAL(serverPoolChanged()),
ui->centralwidget, SLOT(updateServerPool()));
connect(&logic, SIGNAL(localPoolChanged()),
ui->centralwidget, SLOT(updateLocalPool()));
connect(&logic, SIGNAL(sendLog(QString)),
ui->centralwidget, SLOT(addLog(QString)));
}
int Socket::passivate(unsigned short port){
string backlogStr = configuration->get("backlog");
int backlog = atoi(backlogStr.c_str());
this->port = port;
setLocalAddress(port);
if ((socketFd = socket(AF_INET, SOCK_STREAM, 0)) < 0){
notifyErrorOn("get file descriptor");
return -1;
}
if (bind(socketFd, (struct sockaddr *) &localAddress, sizeof (localAddress)) < 0){
notifyErrorOn("bind");
return -1;
}
if (listen(socketFd, backlog) < 0){
notifyErrorOn("listen");
return -1;
}
return 0;
}
int FSocketDomain::bind(struct addrinfo *addr)
{
int ret = 0;
do
{
ret = createSocket(addr->ai_protocol);
if (ret != 0)
break;
int optval = 1;
ret = ::setsockopt(this->m_socketfd, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof(optval));
if (ret != 0)
{
ELOGM_PRINTLN_ERR("setsockopt error", FUtil::getErrCode(), FUtil::getErrStr());
break;
}
ret = -1;
while (addr != NULL)
{
ret = ::bind(this->m_socketfd, addr->ai_addr, addr->ai_addrlen);
if (ret != 0)
{
ELOGM_PRINTLN_ERR("bind error", FUtil::getErrCode(), FUtil::getErrStr());
addr = addr->ai_next;
continue;
}
break;
}
if (ret != 0)
break;
setLocalAddress(addr->ai_addr);
} while (false);
return ret == 0 ? 0 : -1;
}
/*
* Sends a message
*/
void CUdpSock::sendTo( const uint8 *buffer, uint len, const CInetAddress& addr )
{
// Send
if ( ::sendto( _Sock, (const char*)buffer, len, 0, (sockaddr*)(addr.sockAddr()), sizeof(sockaddr) ) != (sint32)len )
{
throw ESocket( "Unable to send datagram" );
}
_BytesSent += len;
if ( _Logging )
{
LNETL0_DEBUG( "LNETL0: Socket %d sent %d bytes to %s", _Sock, len, addr.asString().c_str() );
}
// If socket is unbound, retrieve local address
if ( ! _Bound )
{
setLocalAddress();
_Bound = true;
}
#ifdef NL_OS_WINDOWS
// temporary by ace to know size of SO_MAX_MSG_SIZE
static bool first = true;
if (first)
{
uint MMS, SB;
int size = sizeof (MMS);
getsockopt (_Sock, SOL_SOCKET, SO_SNDBUF, (char *)&SB, &size);
getsockopt (_Sock, SOL_SOCKET, SO_MAX_MSG_SIZE, (char *)&MMS, &size);
LNETL0_INFO ("LNETL0: The udp SO_MAX_MSG_SIZE=%u, SO_SNDBUF=%u", MMS, SB);
first = false;
}
#endif
}
void QHttpSocketEngine::slotSocketReadNotification()
{
Q_D(QHttpSocketEngine);
if (d->state != Connected && d->socket->bytesAvailable() == 0)
return;
if (d->state == Connected) {
// Forward as a read notification.
if (d->readNotificationEnabled)
emitReadNotification();
return;
}
readResponseContent:
if (d->state == ReadResponseContent) {
char dummybuffer[4096];
while (d->pendingResponseData) {
int read = d->socket->read(dummybuffer, qMin(sizeof(dummybuffer), (size_t)d->pendingResponseData));
if (read >= 0)
dummybuffer[read] = 0;
if (read == 0)
return;
if (read == -1) {
d->socket->disconnectFromHost();
emitWriteNotification();
return;
}
d->pendingResponseData -= read;
}
if (d->pendingResponseData > 0)
return;
d->state = SendAuthentication;
slotSocketConnected();
return;
}
// Still in handshake mode. Wait until we've got a full response.
bool done = false;
do {
d->readBuffer += d->socket->readLine();
} while (!(done = d->readBuffer.endsWith("\r\n\r\n")) && d->socket->canReadLine());
if (!done) {
// Wait for more.
return;
}
if (!d->readBuffer.startsWith("HTTP/1.")) {
// protocol error, this isn't HTTP
d->readBuffer.clear();
d->socket->close();
setState(QAbstractSocket::UnconnectedState);
setError(QAbstractSocket::ProxyProtocolError, tr("Did not receive HTTP response from proxy"));
emitConnectionNotification();
return;
}
QHttpResponseHeader responseHeader(QString::fromLatin1(d->readBuffer));
d->readBuffer.clear(); // we parsed the proxy protocol response. from now on direct socket reading will be done
int statusCode = responseHeader.statusCode();
QAuthenticatorPrivate *priv = 0;
if (statusCode == 200) {
d->state = Connected;
setLocalAddress(d->socket->localAddress());
setLocalPort(d->socket->localPort());
setState(QAbstractSocket::ConnectedState);
d->authenticator.detach();
priv = QAuthenticatorPrivate::getPrivate(d->authenticator);
priv->hasFailed = false;
} else if (statusCode == 407) {
if (d->credentialsSent) {
//407 response again means the provided username/password were invalid.
d->authenticator = QAuthenticator(); //this is needed otherwise parseHttpResponse won't set the state, and then signal isn't emitted.
d->authenticator.detach();
priv = QAuthenticatorPrivate::getPrivate(d->authenticator);
priv->hasFailed = true;
}
else if (d->authenticator.isNull())
d->authenticator.detach();
priv = QAuthenticatorPrivate::getPrivate(d->authenticator);
priv->parseHttpResponse(responseHeader, true);
if (priv->phase == QAuthenticatorPrivate::Invalid) {
// problem parsing the reply
d->socket->close();
setState(QAbstractSocket::UnconnectedState);
setError(QAbstractSocket::ProxyProtocolError, tr("Error parsing authentication request from proxy"));
emitConnectionNotification();
return;
}
bool willClose;
QString proxyConnectionHeader = responseHeader.value(QLatin1String("Proxy-Connection"));
// Although most proxies use the unofficial Proxy-Connection header, the Connection header
// from http spec is also allowed.
if (proxyConnectionHeader.isEmpty())
proxyConnectionHeader = responseHeader.value(QLatin1String("Connection"));
proxyConnectionHeader = proxyConnectionHeader.toLower();
if (proxyConnectionHeader == QLatin1String("close")) {
willClose = true;
} else if (proxyConnectionHeader == QLatin1String("keep-alive")) {
willClose = false;
} else {
// no Proxy-Connection header, so use the default
// HTTP 1.1's default behaviour is to keep persistent connections
// HTTP 1.0 or earlier, so we expect the server to close
willClose = (responseHeader.majorVersion() * 0x100 + responseHeader.minorVersion()) <= 0x0100;
}
if (willClose) {
// the server will disconnect, so let's avoid receiving an error
// especially since the signal below may trigger a new event loop
d->socket->disconnectFromHost();
d->socket->readAll();
}
if (priv->phase == QAuthenticatorPrivate::Done)
emit proxyAuthenticationRequired(d->proxy, &d->authenticator);
// priv->phase will get reset to QAuthenticatorPrivate::Start if the authenticator got modified in the signal above.
if (priv->phase == QAuthenticatorPrivate::Done) {
setError(QAbstractSocket::ProxyAuthenticationRequiredError, tr("Authentication required"));
d->socket->disconnectFromHost();
} else {
// close the connection if it isn't already and reconnect using the chosen authentication method
d->state = SendAuthentication;
if (willClose) {
d->socket->connectToHost(d->proxy.hostName(), d->proxy.port());
} else {
bool ok;
int contentLength = responseHeader.value(QLatin1String("Content-Length")).toInt(&ok);
if (ok && contentLength > 0) {
d->state = ReadResponseContent;
d->pendingResponseData = contentLength;
goto readResponseContent;
} else {
d->state = SendAuthentication;
slotSocketConnected();
}
}
return;
}
} else {
d->socket->close();
setState(QAbstractSocket::UnconnectedState);
if (statusCode == 403 || statusCode == 405) {
// 403 Forbidden
// 405 Method Not Allowed
setError(QAbstractSocket::SocketAccessError, tr("Proxy denied connection"));
} else if (statusCode == 404) {
// 404 Not Found: host lookup error
setError(QAbstractSocket::HostNotFoundError, QAbstractSocket::tr("Host not found"));
} else if (statusCode == 503) {
// 503 Service Unavailable: Connection Refused
setError(QAbstractSocket::ConnectionRefusedError, QAbstractSocket::tr("Connection refused"));
} else {
// Some other reply
//qWarning("UNEXPECTED RESPONSE: [%s]", responseHeader.toString().toLatin1().data());
setError(QAbstractSocket::ProxyProtocolError, tr("Error communicating with HTTP proxy"));
}
}
// The handshake is done; notify that we're connected (or failed to connect)
emitConnectionNotification();
}
static int
brl_construct (BrailleDisplay *brl, char **parameters, const char *device) {
if (!allocateCommandDescriptors()) return 0;
inputLength = 0;
inputStart = 0;
inputEnd = 0;
outputLength = 0;
if (isQualifiedDevice(&device, "client")) {
static const ModeEntry clientModeEntry = {
#ifdef AF_LOCAL
requestLocalConnection,
#endif /* AF_LOCAL */
#ifdef __MINGW32__
requestNamedPipeConnection,
#endif /* __MINGW32__ */
requestInetConnection
};
mode = &clientModeEntry;
} else if (isQualifiedDevice(&device, "server")) {
static const ModeEntry serverModeEntry = {
#ifdef AF_LOCAL
acceptLocalConnection,
#endif /* AF_LOCAL */
#ifdef __MINGW32__
acceptNamedPipeConnection,
#endif /* __MINGW32__ */
acceptInetConnection
};
mode = &serverModeEntry;
} else {
unsupportedDevice(device);
goto failed;
}
if (!*device) device = VR_DEFAULT_SOCKET;
#ifdef AF_LOCAL
if (device[0] == '/') {
struct sockaddr_un address;
if (setLocalAddress(device, &address)) {
fileDescriptor = mode->getLocalConnection(&address);
}
} else
#endif /* AF_LOCAL */
#ifdef __MINGW32__
if (device[0] == '\\') {
fileDescriptor = mode->getNamedPipeConnection(device);
} else {
static WSADATA wsadata;
if (WSAStartup(MAKEWORD(1, 1), &wsadata)) {
logWindowsSystemError("socket library start");
goto failed;
}
}
#endif /* __MINGW32__ */
{
struct sockaddr_in address;
if (setInetAddress(device, &address)) {
fileDescriptor = mode->getInetConnection(&address);
}
}
if (fileDescriptor != -1) {
char *line = NULL;
while (1) {
if (line) free(line);
if ((line = readCommandLine())) {
const char *word;
logMessage(LOG_DEBUG, "command received: %s", line);
if ((word = strtok(line, inputDelimiters))) {
if (testWord(word, "cells")) {
if (dimensionsChanged(brl)) {
free(line);
return 1;
}
} else if (testWord(word, "quit")) {
break;
} else {
logMessage(LOG_WARNING, "unexpected command: %s", word);
}
}
} else {
asyncWait(1000);
}
}
if (line) free(line);
close(fileDescriptor);
fileDescriptor = -1;
}
failed:
deallocateCommandDescriptors();
return 0;
}
/**
* Offer an Unix socket over this stream tube.
*
* This method offers an Unix socket over this stream tube. The socket address is given as a
* a QString, which should contain the path to the socket. Abstract Unix sockets are also supported,
* and are given as addresses prefixed with a \c NUL byte.
*
* If your application uses QLocalServer as the local Unix server implementation, you can use the
* offerUnixSocket(const QLocalServer *, const QVariantMap &, bool) overload instead to more easily
* pass the server's listen address.
*
* Note that only connection managers for which supportsUnixSocketsOnLocalhost() or
* supportsAbstractUnixSocketsOnLocalhost() is \c true support exporting Unix sockets.
*
* If supportsUnixSocketsWithCredentials() or supportsAbstractUnixSocketsWithCredentials(), as
* appropriate, returns \c true, the \c requireCredentials parameter can be set to \c true to make
* the connection manager pass an SCM_CREDS or SCM_CREDENTIALS message as supported by the platform
* when making a new connection. This enables preventing other local users from connecting to the
* service, but might not be possible to use with all protocols as the message is in-band in the
* data stream.
*
* Arbitrary parameters can be associated with the offer to bootstrap legacy protocols; these will
* in particular be available as IncomingStreamTubeChannel::parameters() for a tube receiver
* implemented using TelepathyQt in the other end.
*
* This method requires OutgoingStreamTubeChannel::FeatureCore to be ready.
*
* \param socketAddress A valid path to an existing Unix socket or abstract Unix socket.
* \param parameters A dictionary of arbitrary parameters to send with the tube offer.
* \param requireCredentials Whether the server requires a SCM_CREDS or SCM_CREDENTIALS message
* upon connection.
* \return A PendingOperation which will emit PendingOperation::finished
* when the stream tube is ready to be used
* (hence in the #TubeStateOpen state).
*/
PendingOperation *OutgoingStreamTubeChannel::offerUnixSocket(
const QString &socketAddress,
const QVariantMap ¶meters,
bool requireCredentials)
{
SocketAccessControl accessControl = requireCredentials ?
SocketAccessControlCredentials :
SocketAccessControlLocalhost;
if (!isReady(OutgoingStreamTubeChannel::FeatureCore)) {
warning() << "OutgoingStreamTubeChannel::FeatureCore must be ready before "
"calling offerTube";
return new PendingFailure(TP_QT_ERROR_NOT_AVAILABLE,
QLatin1String("Channel not ready"),
OutgoingStreamTubeChannelPtr(this));
}
// The tube must be not offered
if (state() != TubeChannelStateNotOffered) {
warning() << "You can not expose more than a socket for each Stream Tube";
return new PendingFailure(TP_QT_ERROR_NOT_AVAILABLE,
QLatin1String("Channel busy"), OutgoingStreamTubeChannelPtr(this));
}
// In this specific overload, we're handling an Unix/AbstractUnix socket
if (socketAddress.startsWith(QLatin1Char('\0'))) {
// Abstract Unix socket case
// Check if the combination type/access control is supported
if ((accessControl == SocketAccessControlLocalhost &&
!supportsAbstractUnixSocketsOnLocalhost()) ||
(accessControl == SocketAccessControlCredentials &&
!supportsAbstractUnixSocketsWithCredentials()) ) {
warning() << "You requested an address type/access control combination "
"not supported by this channel";
return new PendingFailure(TP_QT_ERROR_NOT_IMPLEMENTED,
QLatin1String("The requested address type/access control "
"combination is not supported"),
OutgoingStreamTubeChannelPtr(this));
}
setAddressType(SocketAddressTypeAbstractUnix);
setAccessControl(accessControl);
setLocalAddress(socketAddress);
PendingVoid *pv = new PendingVoid(
interface<Client::ChannelTypeStreamTubeInterface>()->Offer(
SocketAddressTypeAbstractUnix,
QDBusVariant(QVariant(socketAddress.toLatin1())),
accessControl,
parameters),
OutgoingStreamTubeChannelPtr(this));
PendingOpenTube *op = new PendingOpenTube(pv, parameters,
OutgoingStreamTubeChannelPtr(this));
return op;
} else {
// Unix socket case
// Check if the combination type/access control is supported
if ((accessControl == SocketAccessControlLocalhost &&
!supportsUnixSocketsOnLocalhost()) ||
(accessControl == SocketAccessControlCredentials &&
!supportsUnixSocketsWithCredentials()) ||
(accessControl != SocketAccessControlLocalhost &&
accessControl != SocketAccessControlCredentials) ) {
warning() << "You requested an address type/access control combination "
"not supported by this channel";
return new PendingFailure(TP_QT_ERROR_NOT_IMPLEMENTED,
QLatin1String("The requested address type/access control "
"combination is not supported"),
OutgoingStreamTubeChannelPtr(this));
}
setAddressType(SocketAddressTypeUnix);
setAccessControl(accessControl);
setLocalAddress(socketAddress);
PendingVoid *pv = new PendingVoid(
interface<Client::ChannelTypeStreamTubeInterface>()->Offer(
SocketAddressTypeUnix,
QDBusVariant(QVariant(socketAddress.toLatin1())),
accessControl,
parameters),
OutgoingStreamTubeChannelPtr(this));
PendingOpenTube *op = new PendingOpenTube(pv, parameters,
OutgoingStreamTubeChannelPtr(this));
return op;
}
}
void DhQAbstractSocket::DvhsetLocalAddress(const QHostAddress& x1) {
return setLocalAddress(x1);
}
void QHttpSocketEngine::slotSocketReadNotification()
{
Q_D(QHttpSocketEngine);
if (d->state != Connected && d->socket->bytesAvailable() == 0)
return;
if (d->state == Connected) {
// Forward as a read notification.
if (d->readNotificationEnabled)
emitReadNotification();
return;
}
if (d->state == ConnectSent) {
d->reply->d_func()->state = QHttpNetworkReplyPrivate::NothingDoneState;
d->state = ReadResponseHeader;
}
if (d->state == ReadResponseHeader) {
bool ok = readHttpHeader();
if (!ok) {
// protocol error, this isn't HTTP
d->socket->close();
setState(QAbstractSocket::UnconnectedState);
setError(QAbstractSocket::ProxyProtocolError, tr("Did not receive HTTP response from proxy"));
emitConnectionNotification();
return;
}
if (d->state == ReadResponseHeader)
return; // readHttpHeader() was not done yet, need to wait for more header data
}
if (d->state == ReadResponseContent) {
char dummybuffer[4096];
while (d->pendingResponseData) {
int read = d->socket->read(dummybuffer, qMin(sizeof(dummybuffer), (size_t)d->pendingResponseData));
if (read == 0)
return;
if (read == -1) {
d->socket->disconnectFromHost();
emitWriteNotification();
return;
}
d->pendingResponseData -= read;
}
if (d->pendingResponseData > 0)
return;
if (d->reply->d_func()->statusCode == 407)
d->state = SendAuthentication;
}
int statusCode = d->reply->statusCode();
QAuthenticatorPrivate *priv = 0;
if (statusCode == 200) {
d->state = Connected;
setLocalAddress(d->socket->localAddress());
setLocalPort(d->socket->localPort());
setState(QAbstractSocket::ConnectedState);
d->authenticator.detach();
priv = QAuthenticatorPrivate::getPrivate(d->authenticator);
priv->hasFailed = false;
} else if (statusCode == 407) {
if (d->authenticator.isNull())
d->authenticator.detach();
priv = QAuthenticatorPrivate::getPrivate(d->authenticator);
if (d->credentialsSent && priv->phase != QAuthenticatorPrivate::Phase2) {
// Remember that (e.g.) NTLM is two-phase, so only reset when the authentication is not currently in progress.
//407 response again means the provided username/password were invalid.
d->authenticator = QAuthenticator(); //this is needed otherwise parseHttpResponse won't set the state, and then signal isn't emitted.
d->authenticator.detach();
priv = QAuthenticatorPrivate::getPrivate(d->authenticator);
priv->hasFailed = true;
}
priv->parseHttpResponse(d->reply->header(), true);
if (priv->phase == QAuthenticatorPrivate::Invalid) {
// problem parsing the reply
d->socket->close();
setState(QAbstractSocket::UnconnectedState);
setError(QAbstractSocket::ProxyProtocolError, tr("Error parsing authentication request from proxy"));
emitConnectionNotification();
return;
}
bool willClose;
QByteArray proxyConnectionHeader = d->reply->headerField("Proxy-Connection");
// Although most proxies use the unofficial Proxy-Connection header, the Connection header
// from http spec is also allowed.
if (proxyConnectionHeader.isEmpty())
proxyConnectionHeader = d->reply->headerField("Connection");
proxyConnectionHeader = proxyConnectionHeader.toLower();
if (proxyConnectionHeader == "close") {
willClose = true;
} else if (proxyConnectionHeader == "keep-alive") {
willClose = false;
} else {
// no Proxy-Connection header, so use the default
// HTTP 1.1's default behaviour is to keep persistent connections
// HTTP 1.0 or earlier, so we expect the server to close
willClose = (d->reply->majorVersion() * 0x100 + d->reply->minorVersion()) <= 0x0100;
}
if (willClose) {
// the server will disconnect, so let's avoid receiving an error
// especially since the signal below may trigger a new event loop
d->socket->disconnectFromHost();
d->socket->readAll();
//We're done with the reply and need to reset it for the next connection
delete d->reply;
d->reply = new QHttpNetworkReply;
}
if (priv->phase == QAuthenticatorPrivate::Done)
emit proxyAuthenticationRequired(d->proxy, &d->authenticator);
// priv->phase will get reset to QAuthenticatorPrivate::Start if the authenticator got modified in the signal above.
if (priv->phase == QAuthenticatorPrivate::Done) {
setError(QAbstractSocket::ProxyAuthenticationRequiredError, tr("Authentication required"));
d->socket->disconnectFromHost();
} else {
// close the connection if it isn't already and reconnect using the chosen authentication method
d->state = SendAuthentication;
if (willClose) {
d->socket->connectToHost(d->proxy.hostName(), d->proxy.port());
} else {
// send the HTTP CONNECT again
slotSocketConnected();
}
return;
}
} else {
d->socket->close();
setState(QAbstractSocket::UnconnectedState);
if (statusCode == 403 || statusCode == 405) {
// 403 Forbidden
// 405 Method Not Allowed
setError(QAbstractSocket::SocketAccessError, tr("Proxy denied connection"));
} else if (statusCode == 404) {
// 404 Not Found: host lookup error
setError(QAbstractSocket::HostNotFoundError, QAbstractSocket::tr("Host not found"));
} else if (statusCode == 503) {
// 503 Service Unavailable: Connection Refused
setError(QAbstractSocket::ConnectionRefusedError, QAbstractSocket::tr("Connection refused"));
} else {
// Some other reply
//qWarning("UNEXPECTED RESPONSE: [%s]", responseHeader.toString().toLatin1().data());
setError(QAbstractSocket::ProxyProtocolError, tr("Error communicating with HTTP proxy"));
}
}
// The handshake is done; notify that we're connected (or failed to connect)
emitConnectionNotification();
}
