int get_data(struct trigger_t *trigger, struct can_frame *frame) {
uint16_t crc;
if (frame->can_dlc == 6) {
trigger->length = (frame->data[2] << 8) | frame->data[3];
trigger->crc = (frame->data[4] << 8) | frame->data[5];
printf("length 0x%04x crc 0x%04x\n", trigger->length, trigger->crc);
trigger->data = (uint8_t *) calloc(trigger->length + 1, 1);
if (!trigger->data) {
fprintf(stderr, "can't alloc memory for config data: %s\n", strerror(errno));
return (EXIT_FAILURE);
}
trigger->data_index = 0;
return 0;
}
if (trigger->data_index < trigger->length) {
memcpy(&trigger->data[trigger->data_index], frame->data, 8);
trigger->data_index += 8;
} else {
printf("Error: unexpected data\n");
return (EXIT_FAILURE);
}
if (trigger->data_index == trigger->length) {
if (!trigger->background && trigger->verbose)
printf("data complete %d %d\n", trigger->data_index, trigger->length);
crc = CRCCCITT(trigger->data, trigger->length, 0xFFFF);
if (crc == trigger->crc) {
if (!trigger->background && trigger->verbose)
printf("crc 0x%04x 0x%04x\n", crc, trigger->crc);
strip_ms2_spaces(trigger->data, trigger->length);
}
printf("Data:\n%s\n", trigger->data);
read_loco_data((char *)trigger->data, CONFIG_STRING);
print_locos();
printf("max locos : %d\n", get_loco_max());
set_led_pattern(trigger, LED_ST_HB_SLOW);
free(trigger->data);
}
return 0;
}
int main(int argc, char **argv) {
pthread_t pth;
int opt;
struct ifreq ifr;
struct trigger_t trigger_data;
struct sockaddr_can caddr;
fd_set readfds, exceptfds;
struct can_frame frame;
uint16_t member;
uint8_t buffer[MAXLEN];
memset(&trigger_data, 0, sizeof(trigger_data));
memset(ifr.ifr_name, 0, sizeof(ifr.ifr_name));
strcpy(ifr.ifr_name, "can0");
trigger_data.led_pin = -1;
trigger_data.pb_pin = -1;
trigger_data.interval = DEF_INTERVAL;
while ((opt = getopt(argc, argv, "i:l:p:t:fvh?")) != -1) {
switch (opt) {
case 'i':
strncpy(ifr.ifr_name, optarg, sizeof(ifr.ifr_name));
break;
case 't':
trigger_data.interval = atoi(optarg);
break;
case 'l':
trigger_data.led_pin = atoi(optarg);
break;
case 'p':
trigger_data.pb_pin = atoi(optarg);
break;
case 'v':
trigger_data.verbose = 1;
break;
case 'f':
trigger_data.background = 0;
break;
case 'h':
case '?':
usage(basename(argv[0]));
exit(EXIT_SUCCESS);
default:
usage(basename(argv[0]));
exit(EXIT_FAILURE);
}
}
/* prepare CAN socket */
if ((trigger_data.socket = socket(PF_CAN, SOCK_RAW, CAN_RAW)) < 0) {
fprintf(stderr, "error creating CAN socket: %s\n", strerror(errno));
exit(EXIT_FAILURE);
}
memset(&caddr, 0, sizeof(caddr));
caddr.can_family = AF_CAN;
if (ioctl(trigger_data.socket, SIOCGIFINDEX, &ifr) < 0) {
fprintf(stderr, "setup CAN socket error: %s %s\n", strerror(errno), ifr.ifr_name);
exit(EXIT_FAILURE);
}
caddr.can_ifindex = ifr.ifr_ifindex;
if (bind(trigger_data.socket, (struct sockaddr *)&caddr, sizeof(caddr)) < 0) {
fprintf(stderr, "error binding CAN socket: %s\n", strerror(errno));
exit(EXIT_FAILURE);
}
trigger_data.caddr = caddr;
/* Create thread if LED pin defined */
if ((trigger_data.led_pin) > 0) {
trigger_data.led_pattern = LED_ST_HB_SLOW;
gpio_export(trigger_data.led_pin);
gpio_direction(trigger_data.led_pin, 0);
if (pthread_mutex_init(&lock, NULL)) {
fprintf(stderr, "can't init mutex %s\n", strerror(errno));
exit(EXIT_FAILURE);
}
if (pthread_create(&pth, NULL, LEDMod, &trigger_data)) {
fprintf(stderr, "can't create pthread %s\n", strerror(errno));
exit(EXIT_FAILURE);
}
if (!trigger_data.background && trigger_data.verbose)
printf("created LED thread\n");
}
if (trigger_data.background) {
pid_t pid;
/* fork off the parent process */
pid = fork();
if (pid < 0) {
exit(EXIT_FAILURE);
}
/* if we got a good PID, then we can exit the parent process. */
if (pid > 0) {
if (trigger_data.verbose)
printf("Going into background ...\n");
exit(EXIT_SUCCESS);
}
}
/* initialize push button */
if ((trigger_data.pb_pin) > 0) {
/* first free pin */
gpio_unexport(trigger_data.pb_pin);
gpio_export(trigger_data.pb_pin);
gpio_direction(trigger_data.pb_pin, 1);
gpio_edge(trigger_data.pb_pin, EDGE_FALLING);
trigger_data.pb_fd = gpio_open(trigger_data.pb_pin);
}
FD_ZERO(&readfds);
FD_ZERO(&exceptfds);
/* delete pending push button event */
if ((trigger_data.pb_pin) > 0) {
read(trigger_data.pb_fd, NULL, 100);
lseek(trigger_data.pb_fd, 0, SEEK_SET);
}
/* loop forever TODO: if interval is set */
while (1) {
FD_SET(trigger_data.socket, &readfds);
/* extend FD_SET only if push button pin is set */
if (trigger_data.pb_pin > 0)
FD_SET(trigger_data.pb_fd, &exceptfds);
if (select(MAX(trigger_data.socket, trigger_data.pb_fd) + 1, &readfds, NULL, &exceptfds, NULL) < 0) {
fprintf(stderr, "select error: %s\n", strerror(errno));
exit(EXIT_FAILURE);
}
/* CAN frame event */
if (FD_ISSET(trigger_data.socket, &readfds)) {
if (read(trigger_data.socket, &frame, sizeof(struct can_frame)) < 0)
fprintf(stderr, "error reading CAN frame: %s\n", strerror(errno));
if (frame.can_id & CAN_EFF_FLAG) {
switch ((frame.can_id & 0x00FF0000UL) >> 16) {
case 0x31:
if (trigger_data.verbose)
print_can_frame(F_CAN_FORMAT_STRG, &frame);
memcpy(&member, frame.data, sizeof(member));
member = ntohs(member);
/* look for MS2 */
if ((member & 0xfff0) == 0x4d50)
get_ms2_dbsize(&trigger_data);
break;
case 0x41:
if (trigger_data.verbose)
print_can_frame(F_CAN_FORMAT_STRG, &frame);
break;
case 0x42:
get_data(&trigger_data, &frame);
/* if (trigger_data.verbose)
print_can_frame(F_CAN_FORMAT_STRG, &frame); */
break;
default:
if (trigger_data.verbose)
print_can_frame(F_CAN_FORMAT_STRG, &frame);
break;
}
}
}
/* push button event */
if (FD_ISSET(trigger_data.pb_fd, &exceptfds)) {
set_led_pattern(&trigger_data, LED_ST_HB_FAST);
/* wait some time for LED pattern change */
usec_sleep(1000 * 1000);
/* send CAN Member Ping */
frame.can_id = 0x00300300;
frame.can_dlc = 0;
memset(frame.data, 0, 8);
if (send_can_frame(trigger_data.socket, &frame, trigger_data.verbose) < 0)
fprintf(stderr, "can't send CAN Member Ping: %s\n", strerror(errno));
lseek(trigger_data.pb_fd, 0, SEEK_SET);
if (read(trigger_data.pb_fd, buffer, sizeof(buffer)) < 0)
fprintf(stderr, "error reading GPIO status: %s\n", strerror(errno));
printf("push button event\n");
}
}
/* TODO : wait until copy is done */
if ((trigger_data.pb_pin) > 0)
gpio_unexport(trigger_data.pb_pin);
if ((trigger_data.led_pin) > 0) {
gpio_unexport(trigger_data.led_pin);
pthread_join(pth, (void *)&trigger_data);
pthread_mutex_unlock(&lock);
}
return 0;
}
int main(void)
{
uint8_t id, rec, i, cs;
color_t c;
packet_t p;
setup();
stop_motor();
sei();
for(i = 0; i < 5; i++)
{
set_led_rgb(255, 0, 255);
_delay_ms(50);
set_led_rgb(255, 255, 0);
_delay_ms(50);
}
// get the current liquid level
update_liquid_level();
for(;;)
{
cli();
g_reset = 0;
g_current_sense_detected = 0;
g_current_sense_num_cycles = 0;
setup();
serial_init();
stop_motor();
set_led_rgb(0, 0, 255);
sei();
id = address_exchange();
for(; !check_reset();)
{
rec = receive_packet(&p);
if (rec == COMM_CRC_FAIL)
continue;
if (rec == COMM_RESET)
break;
if (rec == COMM_OK && (p.dest == DEST_BROADCAST || p.dest == id))
{
// If we've detected a over current sitatuion, ignore all comamnds until reset
cli();
cs = g_current_sense_detected;
sei();
switch(p.type)
{
case PACKET_PING:
break;
case PACKET_SET_MOTOR_SPEED:
if (!cs)
set_motor_speed(p.p.uint8[0], p.p.uint8[1]);
if (p.p.uint8[0] == 0)
flush_saved_tick_count(0);
break;
case PACKET_TICK_DISPENSE:
if (!cs)
{
dispense_ticks((uint16_t)p.p.uint32, 255);
flush_saved_tick_count(0);
}
break;
case PACKET_TIME_DISPENSE:
if (!cs)
{
run_motor_timed(p.p.uint32);
flush_saved_tick_count(0);
}
break;
case PACKET_IS_DISPENSING:
is_dispensing();
break;
case PACKET_LIQUID_LEVEL:
get_liquid_level();
break;
case PACKET_UPDATE_LIQUID_LEVEL:
update_liquid_level();
break;
case PACKET_LED_OFF:
set_led_pattern(LED_PATTERN_OFF);
break;
case PACKET_LED_IDLE:
if (!cs)
set_led_pattern(LED_PATTERN_IDLE);
break;
case PACKET_LED_DISPENSE:
if (!cs)
set_led_pattern(LED_PATTERN_DISPENSE);
break;
case PACKET_LED_DRINK_DONE:
if (!cs)
set_led_pattern(LED_PATTERN_DRINK_DONE);
break;
case PACKET_LED_CLEAN:
if (!cs)
set_led_pattern(LED_PATTERN_CLEAN);
break;
case PACKET_COMM_TEST:
comm_test();
break;
case PACKET_ID_CONFLICT:
id_conflict();
break;
case PACKET_SET_CS_THRESHOLD:
g_current_sense_threshold = p.p.uint16[0];
break;
case PACKET_SAVED_TICK_COUNT:
get_saved_tick_count();
break;
case PACKET_RESET_SAVED_TICK_COUNT:
reset_saved_tick_count();
break;
case PACKET_FLUSH_SAVED_TICK_COUNT:
flush_saved_tick_count(1);
break;
case PACKET_GET_LIQUID_THRESHOLDS:
get_liquid_thresholds();
break;
case PACKET_SET_LIQUID_THRESHOLDS:
set_liquid_thresholds(p.p.uint16[0], p.p.uint16[1]);
break;
case PACKET_TICK_SPEED_DISPENSE:
if (!cs)
{
dispense_ticks(p.p.uint16[0], (uint8_t)p.p.uint16[1]);
flush_saved_tick_count(0);
}
break;
case PACKET_PATTERN_DEFINE:
pattern_define(p.p.uint8[0]);
break;
case PACKET_PATTERN_ADD_SEGMENT:
c.red = p.p.uint8[0];
c.green = p.p.uint8[1];
c.blue = p.p.uint8[2];
pattern_add_segment(&c, p.p.uint8[3]);
break;
case PACKET_PATTERN_FINISH:
pattern_finish();
break;
}
}
}
}
return 0;
}
void text_interface(void)
{
char cmd[MAX_CMD_LEN];
uint8_t speed, current_sense;
uint16_t ticks;
uint16_t t;
uint8_t i, cs;
for(i = 0; i < 5; i++)
{
set_led_rgb(0, 0, 255);
_delay_ms(150);
set_led_rgb(0, 0, 0);
_delay_ms(150);
}
set_led_pattern(LED_PATTERN_IDLE);
for(;;)
{
cli();
g_reset = 0;
g_current_sense_detected = 0;
setup();
stop_motor();
serial_init();
cs = 0;
sei();
_delay_ms(10);
dprintf("\nParty Robotics Dispenser at your service!\n\n");
for(;;)
{
cli();
cs = g_current_sense_detected;
sei();
if (!receive_cmd(cmd))
break;
if (sscanf(cmd, "speed %hhu %hhu", &speed, ¤t_sense) == 2)
{
if (!cs)
set_motor_speed(speed, current_sense);
if (current_sense == 0)
flush_saved_tick_count(0);
continue;
}
if (sscanf(cmd, "tickdisp %hu %hhu", (short unsigned int *)&ticks, &speed) == 2)
{
if (!cs)
{
dispense_ticks(ticks, speed);
flush_saved_tick_count(0);
}
continue;
}
if (sscanf(cmd, "timedisp %hu", (short unsigned int *)&t) == 1)
{
if (!cs)
{
run_motor_timed(t);
flush_saved_tick_count(0);
}
continue;
}
if (strncmp(cmd, "forward", 7) == 0)
{
set_motor_direction(MOTOR_DIRECTION_FORWARD);
continue;
}
if (strncmp(cmd, "backward", 8) == 0)
{
set_motor_direction(MOTOR_DIRECTION_BACKWARD);
continue;
}
if (strncmp(cmd, "led_idle", 8) == 0)
{
set_led_pattern(LED_PATTERN_IDLE);
continue;
}
if (strncmp(cmd, "led_dispense", 12) == 0)
{
set_led_pattern(LED_PATTERN_DISPENSE);
continue;
}
if (strncmp(cmd, "led_done", 8) == 0)
{
set_led_pattern(LED_PATTERN_DRINK_DONE);
continue;
}
if (strncmp(cmd, "led_clean", 8) == 0)
{
set_led_pattern(LED_PATTERN_CLEAN);
continue;
}
if (strncmp(cmd, "help", 4) == 0)
{
dprintf("You can use these commands:\n");
dprintf(" speed <speed> <cs>\n");
dprintf(" tickdisp <ticks> <speed>\n");
dprintf(" timedisp <ms>\n");
dprintf(" forward\n");
dprintf(" backward\n");
dprintf(" reset\n");
dprintf(" led_idle\n");
dprintf(" led_dispense\n");
dprintf(" led_done\n");
dprintf(" led_clean\n\n");
dprintf("speed is from 0 - 255. cs = current sense and is 0 or 1.\n");
dprintf("ticks == number of quarter turns. ms == milliseconds\n");
continue;
}
if (strncmp(cmd, "reset", 5) == 0)
break;
dprintf("Unknown command. Use help to get, eh help. Duh.\n");
}
}
}
