/* si4713_g_modulator - get modulator attributes */
static int si4713_g_modulator(struct v4l2_subdev *sd, struct v4l2_modulator *vm)
{
	struct si4713_device *sdev = to_si4713_device(sd);
	int rval = 0;

	if (!sdev) {
		rval = -ENODEV;
		goto exit;
	}

	if (vm->index > 0) {
		rval = -EINVAL;
		goto exit;
	}

	strncpy(vm->name, "FM Modulator", 32);
	vm->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW |
						V4L2_TUNER_CAP_RDS;

	/* Report current frequency range limits */
	vm->rangelow = si4713_to_v4l2(FREQ_RANGE_LOW);
	vm->rangehigh = si4713_to_v4l2(FREQ_RANGE_HIGH);

	mutex_lock(&sdev->mutex);

	if (sdev->power_state) {
		u32 comp_en = 0;

		rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE,
						&comp_en);
		if (rval < 0)
			goto unlock;

		sdev->stereo = get_status_bit(comp_en, 1, 1 << 1);
		sdev->rds_info.enabled = get_status_bit(comp_en, 2, 1 << 2);
	}

	/* Report current audio mode: mono or stereo */
	if (sdev->stereo)
		vm->txsubchans = V4L2_TUNER_SUB_STEREO;
	else
		vm->txsubchans = V4L2_TUNER_SUB_MONO;

	/* Report rds feature status */
	if (sdev->rds_info.enabled)
		vm->txsubchans |= V4L2_TUNER_SUB_RDS;
	else
		vm->txsubchans &= ~V4L2_TUNER_SUB_RDS;

unlock:
	mutex_unlock(&sdev->mutex);
exit:
	return rval;
}
/* si4713_s_frequency - set tuner or modulator radio frequency */
static int si4713_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
{
	struct si4713_device *sdev = to_si4713_device(sd);
	int rval = 0;
	u16 frequency = v4l2_to_si4713(f->frequency);

	/* Check frequency range */
	if (frequency < FREQ_RANGE_LOW || frequency > FREQ_RANGE_HIGH)
		return -EDOM;

	mutex_lock(&sdev->mutex);

	if (sdev->power_state) {
		rval = si4713_tx_tune_freq(sdev, frequency);
		if (rval < 0)
			goto unlock;
		frequency = rval;
		rval = 0;
	}
	sdev->frequency = frequency;
	f->frequency = si4713_to_v4l2(frequency);

unlock:
	mutex_unlock(&sdev->mutex);
	return rval;
}
/* si4713_g_frequency - get tuner or modulator radio frequency */
static int si4713_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
{
	struct si4713_device *sdev = to_si4713_device(sd);
	int rval = 0;

	f->type = V4L2_TUNER_RADIO;

	mutex_lock(&sdev->mutex);

	if (sdev->power_state) {
		u16 freq;
		u8 p, a, n;

		rval = si4713_tx_tune_status(sdev, 0x00, &freq, &p, &a, &n);
		if (rval < 0)
			goto unlock;

		sdev->frequency = freq;
	}

	f->frequency = si4713_to_v4l2(sdev->frequency);

unlock:
	mutex_unlock(&sdev->mutex);
	return rval;
}
Ejemplo n.º 4
0
/*
 * si4713_setup - Sets the device up with current configuration.
 * @sdev: si4713_device structure for the device we are communicating
 */
static int si4713_setup(struct si4713_device *sdev)
{
	struct v4l2_frequency f;
	struct v4l2_modulator vm;
	int rval;

	/* Device procedure needs to set frequency first */
	f.tuner = 0;
	f.frequency = sdev->frequency ? sdev->frequency : DEFAULT_FREQUENCY;
	f.frequency = si4713_to_v4l2(f.frequency);
	rval = si4713_s_frequency(&sdev->sd, &f);

	vm.index = 0;
	if (sdev->stereo)
		vm.txsubchans = V4L2_TUNER_SUB_STEREO;
	else
		vm.txsubchans = V4L2_TUNER_SUB_MONO;
	if (sdev->rds_enabled)
		vm.txsubchans |= V4L2_TUNER_SUB_RDS;
	si4713_s_modulator(&sdev->sd, &vm);

	return rval;
}
Ejemplo n.º 5
0
/* si4713_g_frequency - get tuner or modulator radio frequency */
static int si4713_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
{
	struct si4713_device *sdev = to_si4713_device(sd);
	int rval = 0;

	if (f->tuner)
		return -EINVAL;

	if (sdev->power_state) {
		u16 freq;
		u8 p, a, n;

		rval = si4713_tx_tune_status(sdev, 0x00, &freq, &p, &a, &n);
		if (rval < 0)
			return rval;

		sdev->frequency = freq;
	}

	f->frequency = si4713_to_v4l2(sdev->frequency);

	return rval;
}
static int si4713_setup(struct si4713_device *sdev)
{
	struct v4l2_ext_control ctrl;
	struct v4l2_frequency f;
	struct v4l2_modulator vm;
	struct si4713_device *tmp;
	int rval = 0;

	tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
	if (!tmp)
		return -ENOMEM;

	/* Get a local copy to avoid race */
	mutex_lock(&sdev->mutex);
	memcpy(tmp, sdev, sizeof(*sdev));
	mutex_unlock(&sdev->mutex);

	ctrl.id = V4L2_CID_RDS_TX_PI;
	ctrl.value = tmp->rds_info.pi;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_AUDIO_COMPRESSION_THRESHOLD;
	ctrl.value = tmp->acomp_info.threshold;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_AUDIO_COMPRESSION_GAIN;
	ctrl.value = tmp->acomp_info.gain;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_PILOT_TONE_FREQUENCY;
	ctrl.value = tmp->pilot_info.frequency;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME;
	ctrl.value = tmp->acomp_info.attack_time;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_PILOT_TONE_DEVIATION;
	ctrl.value = tmp->pilot_info.deviation;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_AUDIO_LIMITER_DEVIATION;
	ctrl.value = tmp->limiter_info.deviation;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_RDS_TX_DEVIATION;
	ctrl.value = tmp->rds_info.deviation;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_RDS_TX_PTY;
	ctrl.value = tmp->rds_info.pty;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_AUDIO_LIMITER_ENABLED;
	ctrl.value = tmp->limiter_info.enabled;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_AUDIO_COMPRESSION_ENABLED;
	ctrl.value = tmp->acomp_info.enabled;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_PILOT_TONE_ENABLED;
	ctrl.value = tmp->pilot_info.enabled;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_AUDIO_LIMITER_RELEASE_TIME;
	ctrl.value = tmp->limiter_info.release_time;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME;
	ctrl.value = tmp->acomp_info.release_time;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_TUNE_PREEMPHASIS;
	ctrl.value = tmp->preemphasis;
	rval |= si4713_write_econtrol_integers(sdev, &ctrl);

	ctrl.id = V4L2_CID_RDS_TX_PS_NAME;
	rval |= si4713_set_rds_ps_name(sdev, tmp->rds_info.ps_name);

	ctrl.id = V4L2_CID_RDS_TX_RADIO_TEXT;
	rval |= si4713_set_rds_radio_text(sdev, tmp->rds_info.radio_text);

	/* Device procedure needs to set frequency first */
	f.frequency = tmp->frequency ? tmp->frequency : DEFAULT_FREQUENCY;
	f.frequency = si4713_to_v4l2(f.frequency);
	rval |= si4713_s_frequency(&sdev->sd, &f);

	ctrl.id = V4L2_CID_TUNE_POWER_LEVEL;
	ctrl.value = tmp->power_level;
	rval |= si4713_write_econtrol_tune(sdev, &ctrl);

	ctrl.id = V4L2_CID_TUNE_ANTENNA_CAPACITOR;
	ctrl.value = tmp->antenna_capacitor;
	rval |= si4713_write_econtrol_tune(sdev, &ctrl);

	vm.index = 0;
	if (tmp->stereo)
		vm.txsubchans = V4L2_TUNER_SUB_STEREO;
	else
		vm.txsubchans = V4L2_TUNER_SUB_MONO;
	if (tmp->rds_info.enabled)
		vm.txsubchans |= V4L2_TUNER_SUB_RDS;
	si4713_s_modulator(&sdev->sd, &vm);

	kfree(tmp);

	return rval;
}